Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Measurements and simulations of shock wave generated plasma-vacuum interface

A controlled gradient gas jet was designed, constructed, and tested at the Naval Research Laboratory for the generation of high density and sharp gradient plasma regions. The gas jet uses a laser-generated shock wave to control the density gradient at the vacuum and neutral gas interface. The length scale of the laser produced plasma density gradient is fully controlled by the strength of the shock wave and can be varied continuously from100 {mu}m for a weak shock to under 20 {mu}m in case of strong shock wave as verified by the experimental results and simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hundreds MeV monoenergetic proton bunch from interaction of 10{sup 20-21} W/cm{sup 2} circularly polarized laser pulse with tailored complex target

A complex target (CT) configuration tailored for generating high quality proton bunch by circularly polarized laser pulses at intensities of 10{sup 20-21} W/cm{sup 2} is proposed. Two-dimensional particle-in-cell simulations show that both the collimation and mono-energetic qualities of the accelerated proton bunch obtained using a front-shaped thin foil can be greatly enhanced by the backside inhomogeneous plasma layer. The main mechanisms for improving the accelerated protons are identified and discussed. These include stabilization of the photon cavity, providing hole-boring supplementary acceleration and suppressing the thermal-electron effects. A theory for tailoring the CT parameters is also presented.

43 PARTICLE ACCELERATORS↗

Plasma potential mapping of high power impulse magnetron sputtering discharges

Pulsed emissive probe techniques have been used to determine the plasma potential distribution of high power impulse magnetron sputtering (HiPIMS) discharges. An unbalanced magnetron with a niobium target in argon was investigated for a pulse length of 100 {mu}s at a pulse repetition rate of 100 Hz, giving a peak current of 170 A. The probe data were recorded with a time resolution of 20 ns and a spatial resolution of 1 mm. It is shown that the local plasma potential varies greatly in space and time. The lowest potential was found over the target's racetrack, gradually reaching anode potential (ground) several centimeters away from the target. The magnetic presheath exhibits a funnel-shaped plasma potential resulting in an electric field which accelerates ions toward the racetrack. In certain regions and times, the potential exhibits weak local maxima which allow for ion acceleration to the substrate. Knowledge of the local E and static B fields lets us derive the electrons'ExB drift velocity, which is about 10{sup 5} m/s and shows structures in space and time.

36 MATERIALS SCIENCE↗

Warm dense aluminum plasma generated by the free-electron-laser FLASH

We report on experiments aimed at the generation and characterization of solid density plasmas at the free-electron laser FLASH in Hamburg. Aluminum samples were irradiated with XUV pulses at 13.5 nm wavelength (92 eV photon energy). The pulses with duration of a few tens of femtoseconds and pulse energy up to 100 {mu}J are focused to intensities ranging from 10{sup 13} to 10{sup 17} W/cm{sup 2}. We investigate the absorption and temporal evolution of the sample under irradiation by use of XUV spectroscopy. We discuss the origin of saturable absorption, radiative decay, bremsstrahlung and ionic line emission. Our experimental results are in good agreement with hydrodynamic simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Feasibility of characterizing laser-ablated carbon plasmas via planar laser induced fluorescence

Planar laser induced fluorescence (PLIF) imaging can potentially assess ion distributions and coupling in the context of super-Alfvenic ablation plasma expansions into magnetized background plasmas. In this feasibility study, we consider the application of PLIF to rapidly expanding carbon plasmas generated via energetic laser ablation of graphite. By utilizing hydrodynamic and collisional-radiative simulations, we identify schemes accessible to commercially available tunable lasers for the C I atom, the C II ion, and the C V ion. We then estimate the signal-to-noise ratios yielded by the schemes under reasonable experimental configurations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Computational study of nanosecond pulsed laser ablation and the application to momentum coupling

During the evaporation and ablation of a matter induced by intensive laser radiation, the vapor plasma is ejected from the surface of the target which induces the recoil pressure and impulse in the target. Impulse coupling of laser beams with matter has been extensively studied as the basis of laser propulsion and laser clearing space debris. A one-dimensional (1D) bulk absorption model to simulate the solid target ablated directly by the laser beam is presented; numerical calculation of impulse acting on the target in vacuum with different laser parameters is performed with fluid dynamics theory and 1D Lagrange difference scheme. The calculated results of the impulse coupling coefficients are in good agreement with the experimental results and Phipps' empirical value. The simulated results show that the mechanical coupling coefficients decrease with the increment of laser intensity when the laser pulses generate plasma. The present model can be applied when the laser intensity is 10{sup 8} - 10{sup 10} W/cm{sup 2}, which will provide a guide to the study of momentum coupling of laser beams with matter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dependence of terahertz power from laser-produced plasma on laser intensity

Power of terahertz radiation from plasma which is generated from air irradiated by coupled ({omega}, 2{omega}) femtosecond laser pulses is analyzed for high laser intensities, for which non-linear plasma effects on the pulse propagation become essential, with multidimensional particle-in-cell simulations including the self-consistent plasma kinetics. The growth rate of THz power becomes slower as the laser intensity increases. A reason of such a lowering of efficiency in THz emission is found to be ionization of air by the laser pulse, which results in poor focusing of laser pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron energy transport in the thin foil driven by high contrast high intensity laser pulse

The fast electron spectrum was measured for the interaction between the thin foil and the relativistic optical high field. There were two components in the electron spectrum. The higher temperature component was almost explained by the ponderomotive formula T{sub e}[MeV] = 0.511({radical}(1+I{sub 18}{lambda}{sup 2}{sub {mu}m}/1.37)-1). The total electron spectrum including the lower temperature component was also explained by a simple model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bremsstrahlung {gamma}-ray generation by electrons from gas jets irradiated by laser pulses for radiographic testing

Electron generation from a gas jet irradiated by low energy femtosecond laser pulses is studied experimentally as a promising source of radiation for radioisotope-free {gamma}-ray imaging systems. The calculated yield of {gamma}-rays in the 0.5-2 MeV range, produced by low-average-power lasers and gas targets, exceeds the yields from solid tape targets up to 60 times. In addition, an effect of quasi-mono energetic electrons on {gamma}-ray imaging is also discussed.

07 ISOTOPE AND RADIATION SOURCES↗

Time-resolved soft x-ray spectra from laser-produced Cu plasma

The volumetric heating of a thin copper target has been studied with time resolved x-ray spectroscopy. The copper target was heated by a plasma produced using the Lawrence Livermore National Laboratory's Compact Multipulse Terawatt (COMET) laser. A variable spaced grating spectrometer coupled to an x-ray streak camera measured soft x-ray emission (800-1550 eV) from the back of the copper target to characterize the bulk heating of the target. Radiation hydrodynamic simulations were modeled in two-dimensions using the HYDRA code. The target conditions calculated by HYDRA were post-processed with the atomic kinetics code CRETIN to generate synthetic emission spectra. A comparison between the experimental and simulated spectra indicates the presence of specific ionization states of copper and the corresponding electron temperatures and ion densities throughout the laser-heated copper target.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Laser-driven relativistic electron beam interaction with solid dielectric

The multi-frames shadowgraphy, interferometry and polarimetry diagnostics with sub-ps time resolution were used for an investigation of ionization wave dynamics inside a glass target induced by laser-driven relativistic electron beam. Experiments were done using the 50 TW Leopard laser at the UNR. For a laser flux of {approx}2 Multiplication-Sign 10{sup 18}W/cm{sup 2} a hemispherical ionization wave propagates at c/3. The maximum of the electron density inside the glass target is {approx}2 Multiplication-Sign 10{sup 19}cm{sup -3}. Magnetic and electric fields are less than {approx}15 kG and {approx}1 MV/cm, respectively. The electron temperature has a maximum of {approx}0.5 eV. 2D interference phase shift shows the 'fountain effect' of electron beam. The very low ionization inside glass target {approx}0.1% suggests a fast recombination at the sub-ps time scale. 2D PIC-simulations demonstrate radial spreading of fast electrons by self-consistent electrostatic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimization of extreme ultraviolet photons emission and collection in mass-limited laser produced plasmas for lithography application

The progress in development of commercial system for next generation EUV lithography requires, among other factors, significant improvement in EUV photon sources such as discharge produced plasma (DPP) and laser produced plasma (LPP) devices. There are still many uncertainties in determining the optimum device since there are many parameters for the suitable and efficient energy source and target configuration and size. Complex devices with trigger lasers in DPP or with pre-pulsing in LPP provide wide area for optimization in regards to conversion efficiency (CE) and components lifetime. We considered in our analysis a promising LPP source configuration using 10-30 {mu}m tin droplet targets, and predicted conditions for the most efficient EUV radiation output and collection as well as calculating photons source location and size. We optimized several parameters of dual-beam lasers and their relationship to target size. We used our HEIGHTS comprehensive and integrated full 3D simulation package to study and optimize LPP processes with various target sizes to maximize the CE of the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Energy spread inhibition of compact electron bunch driven by circularly polarized laser pulse

The problem of energy dispersion of a direct laser accelerated electron bunch emerging from a nano-meshed graphene target is investigated. To study the effects of the laser polarization state on the energy spread, numerical calculations and particle-in-cell simulations of evolving one-dimensional confined electron bunch dynamics are performed. It is proved that a circularly polarized laser pulse can inhibit energy dispersion more efficiently than a linearly polarized laser pulse with the same laser and target parameters. That is because the Coulomb expansion of the electron bunch gets more attenuated for a circularly polarized laser pulse compared with a linearly polarized pulse due to the slowly varying temporal laser intensity.

43 PARTICLE ACCELERATORS↗

X-ray backlight measurement of preformed plasma by kJ-class petawatt LFEX laser

Foot and pedestal pulses that precede the main pulse from a high-intensity laser greatly affect laser-plasma interactions. Especially in fast ignition schemes, preceding pulses generate a plasma prior to irradiation by the main pulse. This results in a too energetic and divergent electron beam being generated in the preformed plasma, which reduces the energy coupling efficiency from the heating laser to the dense fuel core. A preformed plasma with a density scale length of 40-60 {mu}m was observed by a time- and space-resolved x-ray backlight technique using the LFEX laser system at the Institute of Laser Engineering, Osaka University. Preceding pulses (i.e., the foot and pedestal) of the LFEX were characterized by comparing observations with calculations results obtained using a two-dimension (2D) radiation-hydrodynamic simulation code. In a separate experiment, the 2D code was benchmarked with the experimentally observed hydrodynamic behavior of a gold plasma produced by a nanosecond laser pulse that mimicked foot and pedestal pulses (intensity: 1 Multiplication-Sign 10{sup 11}-1 Multiplication-Sign 10{sup 12}W/cm{sup 2}). The preceding pulses were estimated to have an intensity of 1 Multiplication-Sign 10{sup 12}-10{sup 13}W/cm{sup 2}, a duration of 2.0 ns, and a spot diameter at the target of 200-600 {mu}m by comparing the measured hydrodynamics of the preformed plasma with that calculated by the 2D hydrodynamic simulation code.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of excited state spatial distributions on plasma diagnostics: Atmospheric pressure laser-induced He-H{sub 2} plasma

Atmospheric pressure plasmas in helium-hydrogen mixtures with H{sub 2} molar concentrations ranging from 0.13% to 19.7% were investigated at times from 1 to 25 {mu}s after formation by a Q-switched Nd:YAG laser. Spatially integrated electron density values are obtained using time resolved optical emission spectroscopic techniques. Depending on mixture concentration and delay time, electron densities vary from almost 10{sup 17} cm{sup -3} to about 10{sup 14} cm{sup -3}. Helium based results agree reasonably well with each other, as do values extracted from the H{sub {alpha}} and H{sub {beta}} emission lines. However, in particular for delays up to about 7 {mu}s and in mixtures with less than 1% hydrogen, large discrepancies are observed between results obtained from the two species. Differences decrease with increasing hydrogen partial pressure and/or increasing delay time. In mixtures with molecular hydrogen fraction of 7% or more, all methods yield electron densities that are in good agreement. These findings seemingly contradict the well-established idea that addition of small amounts of hydrogen for diagnostic purposes does not perturb the plasma. Using Abel inversion analysis of the experimental data and a semi-empirical numerical model, we demonstrate that the major part of the detected discrepancies can be traced to differences in the spatial distributions of excited helium and hydrogen neutrals. The model yields spatially resolved emission intensities and electron density profiles that are in qualitative agreement with experiment. For the test case of a 1% H{sub 2} mixture at 5 {mu}s delay, our model suggests that high electron temperatures cause an elevated degree of ionization and thus a reduction of excited hydrogen concentration relative to that of helium near the plasma center. As a result, spatially integrated analysis of hydrogen emission lines leads to oversampling of the plasma perimeter and thus to lower electron density values compared to those obtained from helium lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coherent microwave radiation from a laser induced plasma

We propose a method for generation of coherent monochromatic microwave/terahertz radiation from a laser-induced plasma. It is shown that small-scale plasma, located in the interaction region of two co-propagating plane-polarized laser beams, can be a source of the dipole radiation at a frequency equal to the difference between the frequencies of the lasers. This radiation is coherent and appears as a result of the so-called optical mixing in plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental observation of left polarized wave absorption near electron cyclotron resonance frequency in helicon antenna produced plasma

Asymmetry in density peaks on either side of an m = +1 half helical antenna is observed both in terms of peak position and its magnitude with respect to magnetic field variation in a linear helicon plasma device [Barada et al., Rev. Sci. Instrum. 83, 063501 (2012)]. The plasma is produced by powering the m = +1 half helical antenna with a 2.5 kW, 13.56 MHz radio frequency source. During low magnetic field (B < 100 G) operation, plasma density peaks are observed at critical magnetic fields on either side of the antenna. However, the density peaks occurred at different critical magnetic fields on both sides of antenna. Depending upon the direction of the magnetic field, in the m = +1 propagation side, the main density peak has been observed around 30 G of magnetic field. On this side, the density peak around 5 G corresponding to electron cyclotron resonance (ECR) is not very pronounced, whereas in the m = -1 propagation side, very pronounced ECR peak has been observed around 5 G. Another prominent density peak around 12 G has also been observed in m = -1 side. However, no peak has been observed around 30 G on this m = -1 side. This asymmetry in the results on both sides is explained on the basis of polarization reversal of left hand polarized waves to right hand polarized waves and vice versa in a bounded plasma system. The density peaking phenomena are likely to be caused by obliquely propagating helicon waves at the resonance cone boundary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasimonoenergetic proton bunches generation from doped foil targets irradiated by intense lasers

We propose a scheme to generate 10 MeV-level quasimonoenergetic proton bunches using proton-doped heavy-ion targets irradiated by intense lasers via target normal sheath acceleration. The heavy substrate ions provide a long-life quasi-stable sheath field to accelerate the doped protons at the target rear and consequently a quasimonoenergetic proton bunch is produced. The scheme is demonstrated by two-dimensional particle-in-cell simulations. An exemplificative simulation with parameters of targets made by ion-implant technique, a kind of modern doping process, gives a quasimonoenergetic bunch with peak energy {approx}13MeV, energy spread {approx}24%, and {approx}nC charge at the focused laser intensity 10{sup 20}W/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗