Electron paramagnetic resonance of oxygen on ZnO and ultraviolet-irradiated MgO.
Oxygen interacting with zinc oxide and UV- irradiated magnesium oxide studied, using electron paramagnetic resonance techniques
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Oxygen interacting with zinc oxide and UV- irradiated magnesium oxide studied, using electron paramagnetic resonance techniques
Anomalous behavior of superconducting transition temperature for certain magnetic ordering of paramagnetic impurities
Electron paramagnetic resonance and optical spectra of trivalent erbium in type II crystals of calcium fluoride disclose existence of cubic, tetragonal and trigonal sites
Electron paramagnetic resonance of photosensitive donors in zinc oxide with oxygen vacancies
Two-phonon absorption in ultrasonic paramagnetic resonance of uranium-doped calcium fluoride, relating wave attenuation to ultrasonic intensity and magnetic field angular variation
Effective surface passivation of crystalline silicon (c-Si) surface by reducing the carrier recombination rate has led to modern c-Si solar cells with efficiencies > 25% in both laboratory and industrial settings. Typical mainstream surface passivation techniques include high-temperature silicon oxide (SiOx), amorphous silicon (a-Si:H), hydrogen-rich silicon nitride (SiNx), and aluminum oxide (Al2O3) [1]. They have demonstrated excellent surface recombination velocity of < 1 cm/s owing to both chemical passivation (via the hydrogen saturation of Si dangling bonds at the c-Si surface), and field-effect passivation (via the band bending from the fixed charge of the dielectric layers). Recently, several groups have studied solution-based organic materials for c-Si passivation, including bis(trifluoromethane)sulfonimide (TFSI), polystyrenesulfonate, and Nafion [2, 3] via spin or dip coating. All films were processed at ambient room temperature, and a high lifetime of 12 ms, as well as a low saturation current density (J0) of 16 fA/cm2, have been demonstrated using Nafion passivation [2]. However, despite the air instability, Nafion has several advantages when introduced to PV applications: (a) Wafer quality can be measured at high throughput after several process stages. (b) It is compatible with PL mapping, compared to HF liquid passivation which cannot be performed in room ambient. (c) Nafion process is fast and poses fewer constraints on process complexity, and cleanness, compared to Al2O3 and a-Si:H passivation. (d) Nafion is the ideal room temperature passivation, which can be applied onto a small fragment of a degraded module to investigate microscopic mechanisms when studying degradation mechanisms. Edge passivation is needed for advanced characterization tests such as Electron Paramagnetic Resonance (EPR), Electrically Detected Magnetic Resonance (EDMR), Deep Level Transient Spectroscopy (DLTS), local cell current-voltage (J-V), and Suns-Voc. In such cases, the laser-damaged minicell edges will obscure the true degradation mechanisms, and Nafion can effectively passivate them without causing further degradation through elevated-temperature processes. In this contribution, we show the passivation results of Nafion on bare nCz and compare it with a Al2O3 witness. We highlight the importance of edge pre-treatment before Nafion to achieve good passivation. We show that Nafion can reach decent passivation without undergoing high-temperature processes. We also explore the temperature dependency of Nafion through photoluminescence (PL) study and demonstrate the application of Nafion under cryogenic temperature (~6 K) through EPR. Our results reveal that Nafion can reduce surface and edge Si dangling bonds at low temperatures. Thus, it can be used as an effective room temperature passivation technique for advanced characterization methods.
Abstract Chiral magnets are excellent platforms for studying intertwined spin, charge, orbit, and lattice degrees of freedom in solid‐state materials. In this work, the anomalous magnetoelectric behavior in a chiral magnet K 2 Co 2 (SO 4 ) 3 is demonstrated using comprehensive experimental probes. This material adopts a P 2 1 3 chiral cubic structure at room temperature. Based on the results of high‐resolution synchrotron X‐ray diffraction, this study shows that the low‐temperature (<130 K) crystal structure is a P 2 1 monoclinic phase, both polar and chiral. Magnetic and thermodynamic measurements reveal highly frustrated magnetic interactions and possible non‐collinear antiferromagnetic ordering at an extremely low temperature ≈0.6 K. Critically, anomalous magnetoelectric correlations are experimentally detected in its paramagnetic temperature regime, which can arise from the synergetic interplay between magnetoelastic and piezoelectric effects. These findings thus indicate that K 2 Co 2 (SO 4 ) 3 is a unique material, displaying multiple emergent structural and magnetic phenomena. This is attributed to both its overall crystallographic symmetry and the fact that its magnetic ions are located at low‐symmetry sites.
Abstract U(VI) peroxide phases (studtite and meta‐studtite) are found throughout the nuclear fuel cycle and exist as corrosion products in high radiation fields. Peroxides are part of a family of reactive oxygen species (ROS) that include hydroperoxyl and superoxide species and are produced during alpha radiolysis of water. While U(VI) peroxides have been thoroughly investigated, the incorporation and stability of ROS species within studtite have not been validated. In the current study, electron paramagnetic resonance (EPR) spectroscopy was used to identify the presence of free radicals within a series of U(VI) peroxide samples containing depleted, highly enriched, and natural uranium. Density functional theory calculations indicated that the predicted EPR signals matched well with a superoxide (O 2 − ⋅) species incorporated into the studtite structure, confirming the presence of ROS in the material. Further analysis of samples that were synthesized between 1945 and 2023 indicated that there is a correlation between the radical signal and the product of specific activity multiplied by age of the sample.
Abstract U(VI) peroxide phases (studtite and meta‐studtite) are found throughout the nuclear fuel cycle and exist as corrosion products in high radiation fields. Peroxides are part of a family of reactive oxygen species (ROS) that include hydroperoxyl and superoxide species and are produced during alpha radiolysis of water. While U(VI) peroxides have been thoroughly investigated, the incorporation and stability of ROS species within studtite have not been validated. In the current study, electron paramagnetic resonance (EPR) spectroscopy was used to identify the presence of free radicals within a series of U(VI) peroxide samples containing depleted, highly enriched, and natural uranium. Density functional theory calculations indicated that the predicted EPR signals matched well with a superoxide (O 2 − ⋅) species incorporated into the studtite structure, confirming the presence of ROS in the material. Further analysis of samples that were synthesized between 1945 and 2023 indicated that there is a correlation between the radical signal and the product of specific activity multiplied by age of the sample.
Thermoelectric materials, capable of converting temperature gradients into electrical power, have been traditionally limited by a trade‐off between thermopower and electrical conductivity. This study introduces a novel, broadly applicable approach that enhances both the spin‐driven thermopower and the thermoelectric figure‐of‐merit (zT) without compromising electrical conductivity, using temperature‐driven spin crossover. Our approach, supported by both theoretical and experimental evidence, is demonstrated through a case study of chromium doped‐manganese telluride, but is not confined to this material and can be extended to other magnetic materials. By introducing dopants to create a high crystal field and exploiting the entropy changes associated with temperature‐driven spin crossover, we achieved a significant increase in thermopower, by approximately 136 μV K −1 , representing more than a 200% enhancement at elevated temperatures within the paramagnetic domain. Our exploration of the bipolar semiconducting nature of these materials reveals that suppressing bipolar magnon/paramagnon‐drag thermopower is key to understanding and utilizing spin crossover‐driven thermopower. These findings, validated by inelastic neutron scattering, X‐ray photoemission spectroscopy, thermal transport, and energy conversion measurements, shed light on crucial material design parameters. We provide a comprehensive framework that analyzes the interplay between spin entropy, hopping transport, and magnon/paramagnon lifetimes, paving the way for the development of high‐performance spin‐driven thermoelectric materials.
Free docosahexaenoic acid (DHAn-3) and gamma linolenic acid (GLAn-6) effects on dimyristoyl phosphatidylcholine (DMPC) membranes were studied as a function of temperature by electron paramagnetic resonance (EPR) spectroscopy. 5- and 16-doxyl stearic acid (5-, 16-DS) spin labels were utilized to obtain information from the interfacial and alkyl chain region, respectively. In the studied temperature range, the presence of DHAn-3 or GLAn-6 caused decreases in maximum hyperfi ne splitting values and correlation times of DMPC membranes. Both in the interfacial region and depths of membrane, changes were more pronounced for DHAn-3 in pure DMPC. In the presence of cholesterol (CH), DHAn-3 and GLAn-6 effects were similar and more pronounced in the depths of the membrane. The changes in the structure and dynamics of samples were obtained from simulations of spectra, which indicated some changes in the number of spectral components by incorporation of DHAn-3 and GLAn-6. In the interfacial region and below the main phase transition temperature of DMPC, there was an increase in heterogeneity. For temperatures above the phase transition, a more homogeneous environment for spin label was obtained in the presence of fatty acids.
Powders of boron- and phosphorus-doped detonation nanodiamonds and sintered pellets of non-doped nanodiamond powders were studied using electron paramagnetic resonance and x-ray diffraction. Doping of detonation nanodiamond crystals with boron and phosphorus was demonstrated to be possible. These methods could be used to diagnose diamond nanocrystals doped during shock-wave synthesis.
We have used electron paramagnetic resonance (EPR) to study high-purity detonation nanodiamond (DND) powders at room temperature. In recording the EPR signal with g factor 2.00247 and line width 0.890 mT, with automatic frequency control locking the frequency of the microwave generator (klystron) to the frequency of the experimental cavity, we observed a change in the shape of the EPR signal from the DND powder due to formation of an anisotropic electrically conducting structure in the powder. The electrical conductivity of the DND sample is apparent in the Dysonian EPR lineshape (strongly asymmetric signal with g factor 2.00146 and line width 0.281 mT) together with an abrupt shift of the baseline at the time of resonant absorption, and in the decrease in the cavity Q due to nonresonant microwave absorption. The observed effect can be explained by transition of the DND powder from a dielectric state to a state with metallic conductivity, due to spin ordering in a preferred direction.
Nano ferrite samples of type Zn{sub 0.5}Co{sub 0.5}Fe{sub 2−x} Pr{sub x}O{sub 4}, 0 ≤ x ≤ 0.2, were prepared by co-precipitation method for different concentration of Pr ions at a calcination temperature of 823 K. The samples were characterized using x-ray diffraction and transmission electron microscope (TEM), UV spectroscopy, FTIR, and electron paramagnetic resonance (EPR). The increase in concentration of Pr ions shows a significant change in the formed nano ferrite particles size, degree of aggregation, energy band gap, and lattice parameters. X-band (9.24 GHz) EPR spectra at room temperature showed a decrease in the g factor as the Pr content was increased. Furthermore, the variation of the Pr{sup 3+} concentration in the samples led to different aggregation states, ranging from isolated nanoparticles with average crystal size of 28.5 to about 15 nm, as confirmed by x-ray diffraction and high-resolution transmission electron microscopy.
Graphical abstract: EPR spectra of BOHC's in 2 kGy {gamma}-irradiated SrBPO{sub 5}:Tb sample using Receiver Gain RG = 4 x 10{sup 4}, Modulation Amplitude MA = 0.25 G, Microwave power setting 6.3 mW: (A) un-annealed sample recorded at 300 K, (B) un-annealed sample recorded at 100 K and (C) sample annealed at 550 K for 10 min and recorded at 100 K. Highlights: {yields} PL studies on Tb doped SrBPO{sub 5} phosphor have shown emission due to Tb{sup 3+} associated with {sup 5}D{sub 3} {yields} {sup 7}F{sub J} and {sup 5}D{sub 4} {yields} {sup 7}F{sub J} (J = 3, 4, 5 and 6) transitions. {yields} The EPR studies on {gamma}-irradiated samples revealed formation of three types of boron oxygen hole trapped centres viz., BOHC{sub 1}, BOHC{sub 2} and BOHC{sub 3} and an electron trapped centre. {yields} The TSL peak at 475 K was associated with the thermal destruction of BOHC{sub 2}. -- Abstract: Trap level spectroscopic studies were carried out on {gamma}-irradiated Tb (1 mole%) doped SrBPO{sub 5} were carried out using photoluminescence (PL), thermally stimulated luminescence (TSL) and electron paramagnetic resonance (EPR) techniques. The incorporation of Tb in the 3+ oxidation state was ascertained from PL studies. Life time for Tb{sup 3+} emission corresponding to the intense transition {sup 5}D{sub 4} {yields} {sup 7}F{sub 5} at 543 nm was determined. The spectral characteristics of the TSL glows have shown that Tb{sup 3+} ions act as the emission center for the glow peak at 475 K. The trap parameters of the glow peak were determined. EPR investigations at room temperature/77 K revealed the stabilization of three boron oxygen hole trapped centers (BOHC's) and oxygen centered radicals such as O{sup -} and O{sub 2}{sup -} and trapped electrons in room temperature {gamma}-irradiated samples. TSL glow peak at 475 K was found to be associated with recombination of electron released from trapped electron center and the BOHC{sub 2} center.
Magnetic ionic liquids (MILs) containing paramagnetic centers have gained widespread recognition as sustainable solvents due to their ability to respond to an external magnetic field. The physico-chemical properties of MILs are dependent on the choice of anion/cation ligands and metal centers; the search for highly tunable ligands and precursors that can confer favorable characteristics, such as low viscosity, is ongoing. Diglycolamides employed as cationic ligands have been previously shown to form hydrophobic MILs that can simultaneously incorporate multiple lanthanide metal centers in both the anion/cation. Despite their enhanced magnetic susceptibility, the effect of diglycolamide chemical structure modifications on the physico-chemical properties of MILs has not been thoroughly studied. Additionally, the possibility of forming diglycolamide-based MILs with popularly employed transition metals has not been investigated and combinations that can simultaneously embed two different types of metal centers in both the anion/cation have not been explored. In this study, thirty (30) MILs comprised of lanthanide and transition metals were synthesized by examining their chelation to both straight-chained and branched diglycolamides. Here, transition metal-based MILs were found to possess high thermal stabilities up to 235 °C compared to 192 °C for those comprised of lanthanides. While MILs comprised of rare-earth metal centers exhibited the lowest viscosities, substituting lanthanides with transition metals in just the anion or cation resulted in enhanced thermal stability and reduced viscosity. The effective magnetic moment for these MILs varied between 4.71 and 21.08 µ B and was much higher compared to all previous classes of MILs prepared using the same metals. Results from this study explore all possible modifications that can be made to these MILs in an effort to demonstrate their structural tunability, which is often highly desirable in various applications, including organic synthesis and chemical separations.
Periplasmic cytochrome A (PpcA) is a representative of a broad class of multiheme cytochromes functioning as protein “nanowires” for storage and extracellular transfer of multiple electrons in the δ-proteobacterium Geobacter sulfurreducens. PpcA contains three bis-His coordinated hemes held in a spatial arrangement that is highly conserved among the multiheme cytochromes c 3 and c 7 families, carries low potential hemes, and is notable for having one of the lowest number of amino acids utilized to maintain a characteristic protein fold and site-specific heme function. Low temperature X-band electron paramagnetic resonance (EPR) spectroscopy has been used to characterize the electronic configuration of the Fe(III) and the ligation mode for each heme. The three sets of EPR signals are assigned to individual hemes in the three-dimensional crystal structure. The relative energy levels of the Fe(III) 3d orbitals for individual hemes were estimated from the principal g-values. The observed g-tensor anisotropy was used as a probe of electronic structure of each heme, and differences were determined by specifics of axial ligation. To ensure unambiguous assignment of highly anisotropic low-spin (HALS) signal to individual hemes, EPR analyses of iron atom electronic configurations have been supplemented with investigation of porphyrin macrocycles by one-dimensional 1 H NMR chemical shift patterns for the methyl substituents. In conclusion, within optimized geometry of hemes in PpcA, the magnetic interactions between hemes were found to be minimal, similar to the c 3 family of tetraheme cytochromes.
We report the synthesis, magnetic properties, and transport properties of paramagnetic metal complexes, [Co(DMF) 4 (TCNQ) 2 ](TCNQ) 2 (1), [La(DMF) 8 (TCNQ)](TCNQ) 5 (2), and [Nd(DMF) 7 (TCNQ)](TCNQ) 5 (3) (DMF = N,N-dimethylformamide, TCNQ = 7,7,8,8-tetracyanoquinodimethane). All three compounds contain fractionally charged TCNQ δ– anions (0 < δ < 1) and mononuclear complex cations in which the coordination environment of a metal center includes several DMF molecules and one or two terminally coordinated TCNQ δ– anions. The coordinated TCNQ δ– anions participate in π–π stacking interactions with noncoordinated TCNQ δ– anions, forming columnar substructures that provide efficient charge-transporting pathways. Furthermore, temperature-dependent conductivity measurements demonstrate that all three compounds exhibit semiconducting behavior.