Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nonlinear models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Mixed models and reduced/selective integration displacement models for nonlinear analysis of curved beams

Simple mixed models are developed for use in the geometrically nonlinear analysis of deep arches. A total Lagrangian description of the arch deformation is used, the analytical formulation being based on a form of the nonlinear deep arch theory with the effects of transverse shear deformation included. The fundamental unknowns comprise the six internal forces and generalized displacements of the arch, and the element characteristic arrays are obtained by using Hellinger-Reissner mixed variational principle. The polynomial interpolation functions employed in approximating the forces are one degree lower than those used in approximating the displacements, and the forces are discontinuous at the interelement boundaries. Attention is given to the equivalence between the mixed models developed herein and displacement models based on reduced integration of both the transverse shear and extensional energy terms. The advantages of mixed models over equivalent displacement models are summarized. Numerical results are presented to demonstrate the high accuracy and effectiveness of the mixed models developed and to permit a comparison of their performance with that of other mixed models reported in the literature.

Noor, A. K.↗
DOE OSTI2023

Bayesian Monte Carlo Evaluation of Imperfect (n, 233 U) Data and Model

Conventional nuclear data evaluation methods using generalized linear least squares make the following assumptions: prior and posterior probability distribution functions (PDFs) of all model parameters and data are normal (Gaussian); the linear approximation is sufficiently accurate to minimize the cost function (even for nonlinear models); the model (e.g., of neutron cross section) and experimental data (including covariance data) are without defect and prior PDFs of parameters and measured data are known perfectly. Neglect of covariance between model parameters and measured data in conventional evaluations contributes to imperfections. These assumptions are inherent to the generalized linear least squares minimization method commonly used for resolved resonance region neutron cross section evaluations but are often not justified due to the presence of non-normal PDFs, nonlinear models (e.g., R-matrix formalism), and inherent imperfections in data and models (e.g., imperfect covariance data). Here, these assumptions are removed in a mathematical framework of Bayes’ theorem, which is implemented using the Metropolis-Hastings Monte Carlo method. Most importantly, new parameters are introduced to parameterize discrepancies between the theoretical model and measured data to quantify judgement about discrepancies or imperfections in a reproducible manner. An evaluation of 233U in the eV region using the ENDF-B/VIII.0 library and transmission data (Guber et al.) is presented, and posterior parameters are compared to those obtained by conventional evaluation methods. This example illustrates the effects of removing the most harmful assumption: that of model-data perfection.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Nonlinear Multiple Models Adaptive Secondary Voltage Control of Microgrids

This article proposes a model-free secondary voltage control (SVC) for microgrids (MG) using nonlinear multiple models adaptive control. Firstly, a linear robust adaptive controller is designed to guarantee the voltage stability in the bounded-input- bounded-output (BIBO) manner so as to meet the operation requirements of MGs. Secondly, a nonlinear adaptive controller is developed to improve the voltage tracking performance with the help of artificial neural networks (ANNs). A switching mechanism for coordinating such two controllers is designed to guarantee the closed-loop stability while achieving accurate voltage tracking. Here, by an online identification based on the input and output data of MGs, the proposed method does not resort to any apriori information of system model and primary control, thus exhibiting good robustness, ease of deployment and disturbance rejection.

17 WIND ENERGY↗
DOE OSTI2022

Variational multiscale reinforcement learning for discovering reduced order closure models of nonlinear spatiotemporal transport systems

Abstract A central challenge in the computational modeling and simulation of a multitude of science applications is to achieve robust and accurate closures for their coarse-grained representations due to underlying highly nonlinear multiscale interactions. These closure models are common in many nonlinear spatiotemporal systems to account for losses due to reduced order representations, including many transport phenomena in fluids. Previous data-driven closure modeling efforts have mostly focused on supervised learning approaches using high fidelity simulation data. On the other hand, reinforcement learning (RL) is a powerful yet relatively uncharted method in spatiotemporally extended systems. In this study, we put forth a modular dynamic closure modeling and discovery framework to stabilize the Galerkin projection based reduced order models that may arise in many nonlinear spatiotemporal dynamical systems with quadratic nonlinearity. However, a key element in creating a robust RL agent is to introduce a feasible reward function, which can be constituted of any difference metrics between the RL model and high fidelity simulation data. First, we introduce a multi-modal RL to discover mode-dependant closure policies that utilize the high fidelity data in rewarding our RL agent. We then formulate a variational multiscale RL (VMRL) approach to discover closure models without requiring access to the high fidelity data in designing the reward function. Specifically, our chief innovation is to leverage variational multiscale formalism to quantify the difference between modal interactions in Galerkin systems. Our results in simulating the viscous Burgers equation indicate that the proposed VMRL method leads to robust and accurate closure parameterizations, and it may potentially be used to discover scale-aware closure models for complex dynamical systems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Data-Driven Voltage Regulation of Distribution Grid Using Nonlinear Autoregressive Model with Exogenous Inputs (NARX)

This article proposes data-driven control via a nonlinear autoregressive model with exogenous inputs (NARX) for real-time voltage regulation of a modified feeder using reactive power sources. Traditional voltage control strategies rely on rule-based heuristics or optimization techniques, which often require detailed system models and extensive computational resources. The NARX-based controller learns system dynamics from historical data and predicts optimal reactive power dispatch in real-time for voltage correction. The proposed approach is evaluated on a power system feeder model under varying load and network conditions. Simulation results demonstrate that the NARX-based controller achieves improved voltage regulation, offering higher adaptability to system fluctuations. This study highlights the potential of data-driven control for enhancing the reliability of power distribution networks.

Donge, Vrushabh [ORNL] (ORCID:0000000306062803)↗
NASA NTRS1972

Development and optimization of a nonlinear multiparameter model for the human operator

A systematic method is proposed for the development, optimization, and comparison of controller-models for the human operator. This is suitable for any designed model, even multiparameter systems. A random search technique is chosen for the parameter optimization. As valuation criteria for the quality of the model development the criterion function - the comparison between the input and output functions of the human operator and those of the model - and the most important characteristic values and functions of the statistical signal theory are used. A nonlinear multiparameter model for the human operator is being designed which considers the complex input information rate per time in a single display. The nonlinear features of the model are effected by a modified threshold element and a decision algorithm. Different display-configurations as well as various transfer functions of the controlled element are explained by different optimized parameter-combinations.

Johannsen, G.↗
NASA NTRS2014

A Generic Nonlinear Aerodynamic Model for Aircraft

A generic model of the aerodynamic coefficients was developed using wind tunnel databases for eight different aircraft and multivariate orthogonal functions. For each database and each coefficient, models were determined using polynomials expanded about the state and control variables, and an othgonalization procedure. A predicted squared-error criterion was used to automatically select the model terms. Modeling terms picked in at least half of the analyses, which totalled 45 terms, were retained to form the generic nonlinear aerodynamic (GNA) model. Least squares was then used to estimate the model parameters and associated uncertainty that best fit the GNA model to each database. Nonlinear flight simulations were used to demonstrate that the GNA model produces accurate trim solutions, local behavior (modal frequencies and damping ratios), and global dynamic behavior (91% accurate state histories and 80% accurate aerodynamic coefficient histories) under large-amplitude excitation. This compact aerodynamics model can be used to decrease on-board memory storage requirements, quickly change conceptual aircraft models, provide smooth analytical functions for control and optimization applications, and facilitate real-time parametric system identification.

Grauer, Jared A.↗
NASA NTRS1983

Evaluation of Inelastic Constitutive Models for Nonlinear Structural Analysis

The influence of inelastic material models on computed stress-strain states, and therefore predicted lives, was studied for thermomechanically loaded structures. Nonlinear structural analyses were performed on a fatigue specimen which was subjected to thermal cycling in fluidized beds and on a mechanically load cycled benchmark notch specimen. Four incremental plasticity creep models (isotropic, kinematic, combined isotropic-kinematic, combined plus transient creep) were exercised. Of the plasticity models, kinematic hardening gave results most consistent with experimental observations. Life predictions using the computed strain histories at the critical location with a Strainrange Partitioning approach considerably overpredicted the crack initiation life of the thermal fatigue specimen.

Kaufman, A.↗
NASA NTRS1982

Evaluation of inelastic constitutive models for nonlinear structural analysis

The influence of inelastic material models on computed stress-strain states, and therefore predicted lives, was studied for thermomechanically loaded structures. Nonlinear structural analyses were performed on a fatigue specimen which had been subjected to thermal cycling in fluidized beds and on a mechanically load cycled benchmark notch specimen. Four incremental plasticity creep models (isotropic, kinematic, combined isotropic kinematic, combined plus transient creep) were exercised using the MARC program. Of the plasticity models, kinematic hardening gave results most consistent with experimental observations. Life predictions using the computed strain histories at the critical location with a strainrange partitioning approach considerably overpredicted the crack initiation life of the thermal fatigue specimen.

Kaufman, A.↗
DOE OSTI2026

Deep learning-assisted modeling for χ (2) nonlinear optics

Modeling second-order (χ(2)) nonlinear optical processes remains computationally expensive due to the need to resolve fast field oscillations and simulate wave propagation using methods such as the split-step Fourier method (SSFM). This can become a bottleneck in real-time applications, such as high-repetition-rate laser systems requiring rapid feedback and control. We present a long short-term memory-based surrogate model trained on SSFM simulations generated from a start-to-end model of the photocathode drive laser at SLAC National Accelerator Laboratory’s Linac Coherent Light Source II. The model achieves over 250× speedup while maintaining high fidelity, enabling future real-time optimization and laying the foundation for data-integrated modeling frameworks and digital twins of laser systems.

Accelerator Physics (physics.acc-ph)↗
NASA NTRS1990

Quiet mode for nonlinear rotor models

High frequency harmonics are generated by helicopter rotor systems, and nonlinear blade-element models of these systems create the same harmonics. In discrete real-time rotorcraft simulation, however, especially for handling qualities research, they are more of a nuisance than a benefit. The cycle times required to adequately represent them are rarely obtainable. The result is that distinct frequencies alias into the pilot and simulator bandwidths, thereby decreasing simulation fidelity. However, use of an interpolation procedure permits the observation of harmonics at their proper frequency locations, and an accompanying notch filter may then be used to attenuate the harmonics prior to decimation. Rotorcraft simulations using these techniques are not contaminated with the spurious frequencies that create variable trim points, produce erroneous stability and control derivative data, and obscure time histories.

Mcfarland, R. E.↗
DOE OSTI2023

Large inflationary logarithms in a nontrivial nonlinear sigma model

Loops of inflationary gravitons are known to induce large temporal and spatial logarithms that can cause perturbation theory to break down. Nonlinear sigma models possess the same kind of derivative interactions and induce the same sorts of large logarithms, without the complicated index structure and potential gauge problem. Previous studies have examined models with zero field space curvature that can be reduced to free field theories by local, invertible field redefinitions. Here we study a model that cannot be so reduced and still shows the same sorts of large logarithms. Additionally, we compute the evolution of the background at 1-loop and 2-loop orders, and we find the 1-loop β and γ functions.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1997

Linear and nonlinear ARMA model parameter estimation using an artificial neural network

This paper addresses parametric system identification of linear and nonlinear dynamic systems by analysis of the input and output signals. Specifically, we investigate the relationship between estimation of the system using a feedforward neural network model and estimation of the system by use of linear and nonlinear autoregressive moving-average (ARMA) models. By utilizing a neural network model incorporating a polynomial activation function, we show the equivalence of the artificial neural network to the linear and nonlinear ARMA models. We compare the parameterization of the estimated system using the neural network and ARMA approaches by utilizing data generated by means of computer simulations. Specifically, we show that the parameters of a simulated ARMA system can be obtained from the neural network analysis of the simulated data or by conventional least squares ARMA analysis. The feasibility of applying neural networks with polynomial activation functions to the analysis of experimental data is explored by application to measurements of heart rate (HR) and instantaneous lung volume (ILV) fluctuations.

NASA Discipline Regulatory Physiology↗
NASA NTRS1982

Materials constitutive models for nonlinear analysis of thermally cycled structures

Effects of inelastic materials models on computed stress-strain solutions for thermally loaded structures were studied by performing nonlinear (elastoplastic creep) and elastic structural analyses on a prismatic, double edge wedge specimen of IN 100 alloy that was subjected to thermal cycling in fluidized beds. Four incremental plasticity creep models (isotropic, kinematic, combined isotropic kinematic, and combined plus transient creep) were exercised for the problem by using the MARC nonlinear, finite element computer program. Maximum total strain ranges computed from the elastic and nonlinear analyses agreed within 5 percent. Mean cyclic stresses, inelastic strain ranges, and inelastic work were significantly affected by the choice of inelastic constitutive model. The computing time per cycle for the nonlinear analyses was more than five times that required for the elastic analysis.

Kaufman, A.↗
DOE OSTI2024

Nonlinear gyrokinetic modelling of high confinement negative triangularity plasmas

Abstract Nonlinear gyrokinetic simulations correctly predict particle as well as ion and electron energy fluxes of high confinement plasmas with a negative triangularity cross sectional shape, showing that core transport in these plasmas is well described by standard gyrokinetic models. Experimentally inferred power balance fluxes are mostly reproduced within one standard deviation across a wide portion of the minor radius. Experimental conditions are reproduced by ion scale simulations, without the need to include density and temperature profile curvature effects. The experimental case is used as baseline to predict that the non-dimensional confinement scaling in negative triangularity plasmas increases strongly with plasma current while slightly degrading at increasing normalized pressure and decreasing collisionality. Recent experiments showed that low toroidal rotation negatively impacts confinement; consistent with the experiment, simulations predict that low rotational shear significantly affects confinement unless the plasma effective charge is maintained above a minimum level. Core confinement is predicted to significantly degrade in low aspect ratio devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1983

ATOPS B-737 inner-loop control system linear model construction and verification

Nonlinear models and block diagrams of an inner-loop control system for the ATOPS B-737 Research Aircraft are presented. Continuous time linear model representations of the nonlinear inner-loop control systems are derived. Closed-loop aircraft simulations comparing nonlinear and linear dynamic responses to step inputs are used to verify the inner-loop control system models.

Broussard, J. R.↗