SEARCH · Engineering Papers

Results for “Nonisothermal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Crystallization of calcia-gallia-silica glasses

A thermal image furance is presently used to study the critical cooling rate for glass formation, and the kinetics of crystallization, of the compositions 18.4CaO-(81.6-X)Ga2O3-XSiO2, where X = 3, 6, 9, and 13.8. Crystallization was studied nonisothermally, and the data were analyzed in light of the Avrami (1939) equation. Critical cooling rate and crystallization activation energy are both found to decrease with increasing silica content, and the results obtained by the present technique are noted to agree with those obtained on the basis of differential thermal analysis measurements.

Ray, C. S.↗

NASA NTRS1984

Analysis of cure in composites processing

Finite element analysis is a general numerical tool for solving the field equations of engineering practice, and this paper demonstrates its use in modeling the nonisothermal cure of pultruded composite material. A very simple grid is used in this case to model a narrow strip of material, and this grid is then solved using a time-stepping transient algorithm to simulate the passage of the strip along the pultruder die. As time proceeds, heat is conducted into the strip from the heated boundaries at the die walls, and cure proceeds at a rate dependent on the local temperature. The computer model can be used to minimize the time needed for sufficient cure, and helps avoid such processing errors as undercure or thermal degradation.

Aylward, L.↗

NASA NTRS1985

Spectral constraints on models of gas in clusters of galaxies

The HEAO 1A2 spectra of clusters of galaxies are used to determine the temperature profile which characterizes the X-ray emitting gas. Strong evidence of nonisothermality is found for the Coma, A85, and A1795 clusters. Properties of the cluster potential which binds the gas are calculated for a range of model parameters. The typical binding mass, if the gas is adiabatic, is 2-4E14 solar masses and is quite centrally concentrated. In addition, the Fe abundance in Coma is .26 + or - .06 solar, less than the typical value (.5) found for rich clusters. The results for the gas in Coma may imply a physical description of the cluster which is quite different from what was previously believed.

Henriksen, M. J.↗

NASA NTRS1985

Automatic Processing of Reactive Polymers

A series of process modeling computer codes were examined. The codes use finite element techniques to determine the time-dependent process parameters operative during nonisothermal reactive flows such as can occur in reaction injection molding or composites fabrication. The use of these analytical codes to perform experimental control functions is examined; since the models can determine the state of all variables everywhere in the system, they can be used in a manner similar to currently available experimental probes. A small but well instrumented reaction vessel in which fiber-reinforced plaques are cured using computer control and data acquisition was used. The finite element codes were also extended to treat this particular process.

Roylance, D.↗

NASA NTRS1984

Analysis of large, non-isothermal elastic-visco-plastic deformations

The development of a general mathematical model and solutions of test problems to analyze large nonisothermal elasto-visco-plastic deformatisms of structures is discussed. Geometric and material type nonlinearities of higher order are present in the development of the mathematical model and in the developed solution methodology.

Riff, R.↗

NASA NTRS1986

Unified constitutive materials model development and evaluation for high-temperature structural analysis applications

Unified constitutive material models were developed for structural analyses of aircraft gas turbine engine hot section components with particular application to an isotropic material used for combustor liners. Differential forms of models independently developed were considered in this study. These models combine the interactions of time-dependent (creep) and time-independent (plasticity) inelastic behavior of a material. Predicted stress-strain responses from these models were evaluated against cyclic isothermal and nonisothermal test results for uniaxial specimens of a nickel-base superalloy. The unified models were implemented in a nonlinear structural analysis code. Two unique NASA Lewis test facilities were used in the evaluation of the models for complex geometry specimens and evaluation of advanced temperature and high-temperature strain measurement instrumentation. Predicted nonlinear structural responses from one of the models for a flat plate and a segment of a conventional combustor liner are presented.

Thompson, R. L.↗

NASA NTRS1984

High-temperature constitutive modeling

Thermomechanical service conditions for high-temperature levels, thermal transients, and mechanical loads severe enough to cause measurable inelastic deformation are studied. Structural analysis in support of the design of high-temperature components depends strongly on accurate mathematical representations of the nonlinear, hereditary, inelastic behavior of structural alloys at high temperature, particularly in the relatively small strain range. Progress is discussed in the following areas: multiaxial experimentation to provide a basis for high-temperature multiaxial constitutive relationships; nonisothermal testing and theoretical development toward a complete thermomechanically path dependent formulation of viscoplasticity; and development of viscoplastic constitutive model accounting for initial anisotropy.

Robinson, D. N.↗

NASA NTRS1984

Constitutive modeling for isotropic materials

A state-of-the-art review of applicable constitutive models with selection of two for detailed comparison with a wide range of experimental tests was conducted. The experimental matrix contained uniaxial and biaxial tensile, creep, stress relaxation, and cyclic fatigue tests at temperatures to 1093 C and strain rates from .0000001 to .001/sec. Some nonisothermal cycles will also be run. The constitutive models will be incorporated into the MARC finite element structural analysis program with a demonstration computation made for advanced turbine blade configuration. In the code development work, particular emphasis is being placed on developing efficient integration algorithms for the highly nonlinear and stiff constitutive equations. Another area of emphasis is the appropriate and efficient methodology for determing constitutive constants from a minimum extent of experimental data.

Lindholm, U. S.↗

NASA NTRS1987

Thermo-elasto-viscoplastic analysis of problems in extension and shear

The problems of extension and shear behavior of structural elements made of carbon steel and subjected to large thermomechanical loads are investigated. The analysis is based on nonlinear geometric and constitutive relations, and is expressed in a rate form. The material constitutive equations are capable of reproducing all nonisothermal, elasto-viscoplastic characteristics. The results of the test problems show that: (1) the formulation can accommodate very large strains and rotations; (2) the model incorporates the simplification associated with rate-insensitive elastic response without losing the ability to model a rate-temperature dependent yield strength and plasticity; and (3) the formulation does not display oscillatory behavior in the stresses for the simple shear problem.

Riff, R.↗

NASA NTRS1987

Finite difference solution for a generalized Reynolds equation with homogeneous two-phase flow

An attempt is made to relate elements of two-phase flow and kinetic theory to the modified generalized Reynolds equation and to the energy equation, in order to arrive at a unified model simulating the pressure and flows in journal bearings, hydrostatic journal bearings, or squeeze film dampers when a two-phase situation occurs due to sudden fluid depressurization and heat generation. The numerical examples presented furnish a test of the algorithm for constant properties, and give insight into the effect of the shaft fluid heat transfer coefficient on the temperature profiles. The different level of pressures achievable for a given angular velocity depends on whether the bearing is thermal or nonisothermal; upwind differencing is noted to be essential for the derivation of a realistic profile.

Braun, M. J.↗

NASA NTRS1986

Crystallization of baria-titania-silica glasses

The critical cooling rate for glass formation, Rc, and the crystallization kinetics of the compositions (1/2)(100-x)BaO-(1/2)(100-x)TiO2-(x)SiO2 with x = 20, 25, 30, 33.3, and 40 mol pct were studied using a thermal image furnace. Crystallization was studied under nonisothermal conditions, and the data were analyzed using the Johnson-Mehl-Avrami equation. The Rc and activation energy for crystallization both decrease with increasing silica content. Fresnoite, Ba2TiSi2O8, crystallized from all of the glasses when they were reheated. The infrared absorption spectra of the glasses and crystals show that they both contain (Si2O7) and square pyramidal (TiO5) groups.

Ray, Chandra S.↗

NASA NTRS1987

Methods and first results of plasma non-isothermal parameters measurements in meteor trails

There is no reliable experimental evidence so far of either the presence or absence of nonisothermal effects in newly formed meteor trails. Neither is there a common opinion on the most effective mechanism of electron cooling. According to the laboratory experimental data collisions of atomic and molecular particles of all kinds having velocities of 10 to 70/kms often yields 1 eV electrons and not infrequently some have energies reaching several electron volts. These highest energy electrons are referred to as superhot electrons. The method of measurement and the results of these measurements in meteor trails are discussed.

Kostylev, K. K.↗

NASA NTRS1988

Non-isothermal elastoviscoplastic analysis of planar curved beams

The development of a general mathematical model and solution methodologies, to examine the behavior of thin structural elements such as beams, rings, and arches, subjected to large nonisothermal elastoviscoplastic deformations is presented. Thus, geometric as well as material type nonlinearities of higher order are present in the analysis. For this purpose a complete true abinito rate theory of kinematics and kinetics for thin bodies, without any restriction on the magnitude of the transformation is presented. A previously formulated elasto-thermo-viscoplastic material constitutive law is employed in the analysis. The methodology is demonstrated through three different straight and curved beams problems.

Simitses, G. J.↗

NASA NTRS1988

Experiments investigating advanced materials under thermomechanical loading

Many high temperature aircraft and rocket engine components experience large mechanical loads as well as severe thermal gradients and transients. These nonisothermal conditions are often large enough to cause inelastic deformations, which are the ultimate cause for failure in those parts. A way to alleviate this problem is through improved engine designs based on better predictions of thermomechanical material behavior. To address this concern, an experimental effort was recently initiated within the Hot Section Technology (HOST) program at Lewis. As part of this effort, two new test systems were added to the Fatigue and Structures Lab., which allowed thermomechanical tests to be conducted under closely controlled conditions. These systems are now being used for thermomechanical testing for the Space Station Receiver program, and will be used to support development of metal matrix composites.

Bartolotta, Paul A.↗

NASA NTRS1988

Thermo-elasto-viscoplastic analysis of problems in extension and shear

Riff, R.↗

NASA NTRS1988

Considerations in development and implementation of elasto-viscoplastic constitutive model for high temperature applications

The prediction of inelastic behavior of metallic materials at elevated temperatures has increased in importance in recent years. The operating conditions within the hot section of a rocket motor or a modern gas turbine engine present an extremely harsh thermomechanical environment. Large thermal transients are induced each time the engine is started or shut down. Additional thermal transients from an elevated ambient occur whenever the engine power level is adjusted to meet flight requirements. The structural elements employed in such hot sections, as well as any engine components located therein, must be capable of withstanding such extreme conditions. Failure of a component would, due to the critical nature of the hot section, lead to an immediate and catastrophic loss in power. Consequently, assuring satisfactory long term performance for such components is a major concern. Nonisothermal loading of structures often causes excursion of stress well into the inelastic range. Moreover, the influence of geometry changes on the response is also significant in most cases. Therefore, both material and geometric nonlinear effects are considered.

Riff, Richard↗

NASA NTRS1987

Constitutive modeling for isotropic materials

The fourth and final year of the HOST project with the initial objective of developing a unified constitutive model for finite element structural analysis of turbine engine hot section components is discussed. The final year's work was primarily concerned with the study of nonisothermal problems and the potential for thermal history effects to occur explicitly in the constitutive equations.

Lindholm, Ulric S.↗

NASA NTRS1985

Thermophoretically enhanced mass transport rates to solid and transpiration-cooled walls across turbulent (law-of-the-wall) boundary layers

Convective-diffusion mass transfer rate predictions are made for both solid wall and transpiration-cooled 'law-of-the-wall' nonisothermal turbulent boundary layers (TBLs), including the mechanism of thermophoresis, i.e., small particle mass transport 'down a temperature gradient'. The present calculations are confined to low mass-loading situations but span the entire particle size range from vapor molecules to particles near the onset of inertial ('eddy') impaction. It is shown that, when Sc is much greater than 1, thermophoresis greatly increases particle deposition rates to internally cooled solid walls, but only partially offsets the appreciable reduction in deposition rates associated with dust-free gas-transpiration-cooled surfaces. Thus, efficient particle sampling from hot dusty gases can be carried out using transpiration 'shielded' probe surfaces.

Gokoglu, Suleyman A.↗