Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NaN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Calculations of surface radiation in arid regions - A case study

The surface and satellite data measured during the preliminary field experiment for the Land-Atmosphere Interactions Experiment conducted at the Heihe River basin in western China are used to investigate the difficulties encountered in the derivation of the surface radiation budget in arid regions. The surface radiation is derived by coupling theoretical radiative transfer calculations with satellite cloud retrievals. For cloud-free cases, the modeled downward solar fluxes are systematically larger than the measured fluxes. It is found that the error can be reduced and that good agreement between the computed and measured surface solar fluxes can be obtained by using an aerosol single-scattering albedo of 0.5 and an optical thickness of about 0.2 in the afternoon hours. For all the cases studied when both surface and satellite data are available, the mean errors are 4.3 and -4.7 W/sq m for the net downward surface solar flux and the downward surface IR flux, respectively. The rms errors are 17.4 and 22.1 W/sq m for the respective surface fluxes. The importance of aerosols in surface radiation calculations is underscored.

Chou, Ming-Dah↗
NASA NTRS1992

Improvement of observer/Kalman filter identification (OKID) by residual whitening

This paper presents a time-domain method to identify a state space model of a linear system and its corresponding observer/Kalman filter from a given set of general input-output data. The identified filter has the properties that its residual is minimized in the least squares sense, orthogonal to the time-shifted versions of itself, and to the given input-output data sequence. The connection between the state space model and a particular auto-regressive moving average description of a linear system is made in terms of the Kalman filter and a deadbeat gain matrix. The procedure first identifies the Markov parameters of an observer system, from which a state space model of the system and the filter gain are computed. The developed procedure is shown to improve results obtained by an existing observer/Kalman filter identification method, which is based on an auto-regressive model without the moving average terms. Numerical and experimental results are presented to illustrate the proposed method.

Phan, Minh↗
NASA NTRS1992

Several recursive techniques for observer/Kalman filter system identification from data

This paper derives algorithms for identifying autoregressive models, with external input, of multi-input multi-output systems from data using a fast transversal filter or a least-squares lattice filter. The autoregressive models including external inputs are used to identify state-space models and the corresponding observer/Kalman filter gains of the system. The derivation is an extension of scalar autoregressive model approaches, modified to cope with multivariables, external inputs and an extra direct-influence term. Comparisons between the fast transversal filter, the least-squares lattice filter and the classical least-squares method are made in terms of complexity, computational cost and practical applications issues. A numerical example is included to illustrate the approach.

Chen, Chung-Wen↗
NASA NTRS1992

Determination of robust stability margin for second-order systems

Robust stabilization of uncertain systems has been extensively investigated and the stability test for the whole set of uncertain parameters has been reduced to a finite number of test points, four points for the characteristic polynomial with independent coefficients. As a result the robust stability margin can be determined using a reasonable amount of computation. It is impossible to apply the results of the test to a practical system as the coefficients of the characteristic polynomial for a physical system are usually functions of uncertain parameters. However, many physical systems may be represented by a second-order mass-spring-damper system with a special multilinear form in its characteristic polynomial. This paper investigates second-order mass-spring-damper systems and the reduction of the number of test points. It is shown that such a system with arbritrary compensators always has a multilinear characteristic polynomial. It is also shown that a line in the two-dimensional parameter space forms the boundary after the mapping of a multilinear characteristic polynomial and this interior extreme line forms a conic curve in the complex plane. The boundary of uncertain domain for a multilinear polynomial with two uncertainty parameters can be determined analytically using this curve, and the four sides image of a square of the uncertain parameter. Therefore, the stability margin may be determined by checking the intersections of the boundary with the zero point. A similar procedure can be used for second-order systems with more than two uncertainty parameters when parameter optimization is used in determining the boundary.

Chuang, C.-H.↗
NASA NTRS1992

Identification of system, observer, and controller from closed-loop experimental data

This paper considers the identification problem of a system operating in closed-loop with an existing feedback controller. The closed-loop system is excited by a known excitation signal, and the resulting time histories of the closed-loop system response and the feedback signal are measured. From the time history data, the algorithm computes the Markov parameters of a closed-loop observer, from which the Markov parameters of the individual open-loop plant, observer, and controller are recovered. A state space model of the open-loop plant and the gain matrices for the controller and the observer are then realized. The results of the paper are demonstrated by an example using actual aircraft flutter test data.

Juang, Jer-Nan↗
NASA NTRS1992

Decentralized control of large flexible structures by joint decoupling

A decentralized control design method is presented for large complex flexible structures by using the idea of joint decoupling. The derivation is based on a coupled substructure state-space model, which is obtained from enforcing conditions of interface compatibility and equilibrium to the substructure state-space models. It is shown that by restricting the control law to be localized state feedback and by setting the joint actuator input commands to decouple joint 'degrees of freedom' (dof) from interior dof, the global structure control design problem can be decomposed into several substructure control design problems. The substructure control gains and substructure observers are designed based on modified substructure state-space models. The controllers produced by the proposed method can operate successfully at the individual substructure level as well as at the global structure level. Therefore, not only control design but also control implementation is decentralized. Stability and performance requirement of the closed-loop system can be achieved by using any existing state feedback control design method. A two-component mass-spring damper system and a three-truss structure are used as examples to demonstrate the proposed method.

Su, Tzu-Jeng↗
NASA NTRS1992

Identifiability of linear systems in physical coordinates

Identifiability of linear, time-invariant systems in physical coordinates is discussed. It is shown that identification of the system matrix in physical coordinates can be accomplished by determining a transformation matrix that relates the physical locations of actuators and sensors to the test-data-derived input and output matrices. For systems with symmetric matrices, the solution of a constrained optimization problem is used to characterize all the possible solutions of the transformation matrix. Conditions for the existence of a unique transformation matrix are established easily from the explicit form of the solutions. For systems with limited inputs and outputs, the question about which part of the system can be uniquely identified is also answered. A simple mass-spring system is used to verify the conclusions of this study.

Su, Tzu-Jeng↗
NASA NTRS1992

SeaWiFS technical report series. Volume 4: An analysis of GAC sampling algorithms. A case study

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) instrument will sample at approximately a 1 km resolution at nadir which will be broadcast for reception by realtime ground stations. However, the global data set will be comprised of coarser four kilometer data which will be recorded and broadcast to the SeaWiFS Project for processing. Several algorithms for degrading the one kilometer data to four kilometer data are examined using imagery from the Coastal Zone Color Scanner (CZCS) in an effort to determine which algorithm would best preserve the statistical characteristics of the derived products generated from the one kilometer data. Of the algorithms tested, subsampling based on a fixed pixel within a 4 x 4 pixel array is judged to yield the most consistent results when compared to the one kilometer data products.

Yeh, Eueng-Nan↗
NASA NTRS1992

Space robotics: Recent accomplishments and opportunities for future research

The Langley Guidance, Navigation, and Control Technical Committee (GNCTC) was one of six technical committees created in 1991 by the Chief Scientist, Dr. Michael F. Card. During the kickoff meeting Dr. Card charged the chairmen to: (1) establish a cross-Center committee; (2) support at least one workshop in a selected discipline; and (3) prepare a technical paper on recent accomplishments in the discipline and on opportunities for future research. The Guidance, Navigation, and Control Committee was formed and selected for focus on the discipline of Space robotics. This report is a summary of the committee's assessment of recent accomplishments and opportunities for future research. The report is organized as follows. First is an overview of the data sources used by the committee. Next is a description of technical needs identified by the committee followed by recent accomplishments. Opportunities for future research ends the main body of the report. It includes the primary recommendation of the committee that NASA establish a national space facility for the development of space automation and robotics, one element of which is a telerobotic research platform in space. References 1 and 2 are the proceedings of two workshops sponsored by the committee during its June 1991, through May 1992 term. The focus of the committee for the June 1992 - May 1993 term will be to further define to the recommended platform in space and to add an additional discipline which includes aircraft related GN&C issues. To the latter end members performing aircraft related research will be added to the committee. (A preliminary assessment of future opportunities in aircraft-related GN&C research has been included as appendix A.)

Montgomery, Raymond C.↗
NASA NTRS1992

Optimal active vibration absorber: Design and experimental results

An optimal active vibration absorber can provide guaranteed closed-loop stability and control for large flexible space structures with collocated sensors/actuators. The active vibration absorber is a second-order dynamic system which is designed to suppress any unwanted structural vibration. This can be designed with minimum knowledge of the controlled system. Two methods for optimizing the active vibration absorber parameters are illustrated: minimum resonant amplitude and frequency matched active controllers. The Controls-Structures Interaction Phase-1 Evolutionary Model at NASA LaRC is used to demonstrate the effectiveness of the active vibration absorber for vibration suppression. Performance is compared numerically and experimentally using acceleration feedback.

Lee-Glauser, Gina↗
NASA NTRS1992

Modeling and measurement of a micro-optic beam deflector

The use is studied of a unity-magnification micro-optic beam deflector. The defelector consists of two arrays of positively powered lenslets. The lenslets on each array are arranged in a square grid. Design criteria are based on usefulness in optical data storage devices. The deflector is designed to operate over a + or - 1.6 range of deflection angles. Modeling results are compared with interferometric analysis of the wavefront from a single lenslet pair. The results indicate that the device is nearly diffraction limited, but there are substantial wavefront errors at the edges and corners of the lenslets.

Milster, Tom D.↗
NASA NTRS1993

An application of the Observer/Kalman Filter Identification (OKID) technique to Hubble flight data

The objective of the current research is to identify vibration parameters, including frequencies, damping ratio and uncertainty characteristics, of the Hubble Space Telescope from flight data using an advanced system identification technique. The Observer/Kalman Filter Identification (OKID) technique is used to identify the vibration parameters. The OKID was recently developed by the researchers in the Spacecraft Dynamics Branch at NASA Langley Research Center.

Juang, Jer-Nan↗
NASA NTRS1992

A time-accurate high-resolution TVD scheme for solving the Navier-Stokes equations

A total variation diminishing (TVD) scheme has been developed and incorporated into an existing time-accurate high-resolution Navier-Stokes code. The accuracy and the robustness of the resulting solution procedure have been assessed by performing many calculations in four different areas: shock tube flows, regular shock reflection, supersonic boundary layer, and shock boundary layer interactions. These numerical results compare well with corresponding exact solutions or experimental data.

Kim, Hyun Dae↗
NASA NTRS1993

Large-scale computation of incompressible viscous flow by least-squares finite element method

The least-squares finite element method (LSFEM) based on the velocity-pressure-vorticity formulation is applied to large-scale/three-dimensional steady incompressible Navier-Stokes problems. This method can accommodate equal-order interpolations and results in symmetric, positive definite algebraic system which can be solved effectively by simple iterative methods. The first-order velocity-Bernoulli function-vorticity formulation for incompressible viscous flows is also tested. For three-dimensional cases, an additional compatibility equation, i.e., the divergence of the vorticity vector should be zero, is included to make the first-order system elliptic. The simple substitution of the Newton's method is employed to linearize the partial differential equations, the LSFEM is used to obtain discretized equations, and the system of algebraic equations is solved using the Jacobi preconditioned conjugate gradient method which avoids formation of either element or global matrices (matrix-free) to achieve high efficiency. To show the validity of this scheme for large-scale computation, we give numerical results for 2D driven cavity problem at Re = 10000 with 408 x 400 bilinear elements. The flow in a 3D cavity is calculated at Re = 100, 400, and 1,000 with 50 x 50 x 50 trilinear elements. The Taylor-Goertler-like vortices are observed for Re = 1,000.

Jiang, Bo-Nan↗
NASA NTRS1993

On neural networks in identification and control of dynamic systems

This paper presents a discussion of the applicability of neural networks in the identification and control of dynamic systems. Emphasis is placed on the understanding of how the neural networks handle linear systems and how the new approach is related to conventional system identification and control methods. Extensions of the approach to nonlinear systems are then made. The paper explains the fundamental concepts of neural networks in their simplest terms. Among the topics discussed are feed forward and recurrent networks in relation to the standard state-space and observer models, linear and nonlinear auto-regressive models, linear, predictors, one-step ahead control, and model reference adaptive control for linear and nonlinear systems. Numerical examples are presented to illustrate the application of these important concepts.

Phan, Minh↗
NASA NTRS1993

Direct calculations of waves in fluid flows using a high-order compact difference scheme

The solution of the unsteady Euler equations by a sixth-order compact difference scheme combined with a fourth-order Runge-Kutta method is investigated. Closed-form expressions for the amplification factors and their corresponding dispersion correlations are obtained by Fourier analysis of the fully discretized, two-dimensional Euler equations, and the numerical dissipation, dispersion, and anisotropic effects are assessed. It is found that the CFL limit for stable calculations is about 0.8. For a CFL number equal to 0.6, the smallest wavelength which is resolved without numerical damping is about 6 to 8 grid nodes. For phase speeds corresponding to acoustic waves, the corresponding time period is resolved by about 200 to 300 time steps. Three numerical examples of waves in compressible flow are included.

Yu, Sheng-Tao↗
NASA NTRS1993

A least-squares finite element method for 3D incompressible Navier-Stokes equations

The least-squares finite element method (LSFEM) based on the velocity-pressure-vorticity formulation is applied to three-dimensional steady incompressible Navier-Stokes problems. This method can accommodate equal-order interpolations, and results in symmetric, positive definite algebraic system. An additional compatibility equation, i.e., the divergence of vorticity vector should be zero, is included to make the first-order system elliptic. The Newton's method is employed to linearize the partial differential equations, the LSFEM is used to obtain discretized equations, and the system of algebraic equations is solved using the Jacobi preconditioned conjugate gradient method which avoids formation of either element or global matrices (matrix-free) to achieve high efficiency. The flow in a half of 3D cubic cavity is calculated at Re = 100, 400, and 1,000 with 50 x 52 x 25 trilinear elements. The Taylor-Gortler-like vortices are observed at Re = 1,000.

Jiang, Bo-Nan↗