SEARCH · Engineering Papers

Results for “NITROGEN 15”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Tribological characteristics of nitrogen (N+) implanted iron

The effect of implantation of nitrogen ions (1.5 MeV) on the friction and wear characteristics of pure ion sliding against M-50 steel (unimplanted) was studied in a pin-on-disk sliding friction apparatus. Test conditions included room temperature (25 C), a dry air atmosphere, a load of 1/2 kg (4.9 N), sliding velocities of 0.043 to 0.078 m/sec (15 to 25 rpm), a pure hydrocarbon lubricant (n-hexadecane), or a U.S.P. mineral oil and nitrogen ion implantation doses of 5x10 to the 15th power and 5x10 to the 17th power ions/sq cm. No differences in wear rates were observed in the low dose experiments. In the high dose experiments, small reductions in initial (40 percent) and steady state (20 percent) wear rates were observed for nitrogen implanted iron riders as compared with unimplanted controls. No differences in average friction coefficients were noted for either dose. Auger electron spectroscopy combined with argon ion bombardment revealed a subsurface Gaussian nitrogen distribution with a maximum concentration of 6 atomic percent at a depth of 0.8 microns. Similar analysis within the wear scar of an implanted rider after 20 microns of wear yielded only background nitrogen concentration. No inward migration of nitrogen ions was observed.

Jones, W. R.↗

NASA NTRS1983

Tribological characteristics of nitrogen (N+) implanted iron

Jones, W. R., Jr.↗

DOE OSTI2021

D-Band EPR and ENDOR Spectroscopy of 15 N-Labeled Photosystem I

For billions of years, nature has optimized the photosynthetic machinery that converts light energy into chemical energy. Key primary reactions of photosynthesis occur in large membrane protein-cofactor complexes. The light-induced sequential electron transfer reactions occur through a chain of donor/acceptor cofactors embedded in the protein matrix resulting in a long-lived transmembrane charge-separated state. EPR is the method of choice to study electron transfer and the interaction of protein environment with redox-active cofactors. However, the spectra of organic cofactor radicals typically are not fully resolved and severely overlap at conventional X-band EPR. Even at Q-band EPR, this overlap is present and often a serious problem. As a result, there is a large variation of the reported EPR data and limited understanding of electronic structures of several redox-active cofactors. These serious problems can often be overcome by the excellent spectral resolution provided by high-frequency EPR (HF EPR). In this work, we study the electronic structure of the primary electron donor P 700 and the secondary electron acceptor A 1 of Photosystem I (PSI) using 130 GHz (D-band) EPR and Electron-Nuclear-Double-Resonance (ENDOR) spectroscopy. PSI was isotopically labeled with 15 N (I = $\frac{1/2}$) to avoid quadrupolar interactions in the most abundant nitrogen isotope 14 N (I = 1) and simplify the ENDOR spectra. ENDOR spectroscopy is central for determining the hyperfine coupling of nitrogen atoms of the two chlorophyll molecules comprising oxidized P 700 and the involvement of protein nitrogen atoms with reduced A 1 . While HF ENDOR of A 1 - allows identification of two nitrogen atoms, HF ENDOR of P 700 + still does not permit unique assignment of the recorded hyperfine couplings.

15N↗

DOE OSTI2024

Plant physiology, shrub size, thaw depth and soil water content, Seward Peninsula, Alaska, 2023

Stomatal response to changing irradiance measurements (m curves), CO2 response (ACi) and light response (AQ) curves on common tussock tundra shrub, graminoid and forb species. Data were collected in July 2023 from three sites on the Seward Peninsula, Kougarok Mile 64, Teller Mile 27 and Council. Measurements were made with LI-COR LI-6800 gas exchange systems on 18 species. For samples from Teller and Kougarok, thaw depth, soil moisture content and dGPS locations are also provided for most samples. Canopy height and canopy diameter are provided for shrubs measured at the Teller site. The data package files include data files, metadata files and the complete instrument output for all gas exchange measurements in .csv format, and a pdf describing the experimental protocols. See the related data package NGA508 for foliar trait data (leaf mass per area, leaf nitrogen concentration).The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a 15-year research effort (2012-2027) to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1987

Diode laser measurements of CO line widths at planetary atmospheric temperatures

A tunable diode laser spectrometer and the sweep integration technique were used to measure hydrogen-broadened half-widths and nitrogen-broadened half-widths of eight lines between P(1) and P(15) in the CO fundamental at several temperatures between 94 and 298 K. The results are of interest in connection with studies of the atmospheres of earth, Jupiter, Saturn, and Titan.

Varanasi, P.↗

NASA NTRS1992

Computational and numerical analysis of hypersonic nozzle flows with comparisons to wind tunnel calibration data

Navier-Stokes (NS), parabolized NS codes, and classical method of characteristics prediction techniques are employed to compute hypersonic nozzle flowfields for the 15 in Mach 6 High Temperature Tunnel and the 16 in Mach 17 Nitrogen Tunnel, which are part of the Langley Research Center. The study focuses on defining the accuracy of these techniques by comparing the computational results to wind tunnel pitot pressure measurements conducted in the newly designed nozzle of the Mach 6 tunnel and in the original nozzle of the Mach 17 tunnel. The comparisons between predicted results and test section pitot surveys for the Mach 6 nozzle are in good agreement and show highly uniform flow over a range of reservoir pressures and temperatures.

Hackett, Charles M.↗

NASA NTRS2004

Cryogenic Nitrogen Thermosyphon Developed and Characterized

A two-phase nitrogen thermosyphon was developed at the NASA Glenn Research Center to efficiently integrate a cryocooler into an insulated liquid-nitrogen-filled tank as part of an advanced development zero-boiloff (ZBO) ground test. NASA Marshall Space Flight Center's (MSFC) Advanced Space Transportation Program supported this test to improve the performance of in-space propulsion system concepts. Recent studies (ref. 1) have shown significant mass reductions and other advantages when incorporating active cooling in a ZBO configuration, enabling consideration of high-performing cryogenic propellants for long-duration applications in space. Active cooling was integrated via a thermosyphon, made of copper, 42 in. (1070 mm) long with an inner diameter of 0.436 in. (11 mm). It was charged with nitrogen to 225 psia at 300 K, which provided a fill ratio of 15 percent. The temperatures and heat flows through the thermosyphon were monitored during the startup phase of the ZBO test, and steady-state tests were conducted over a range of increasing and decreasing heat flows. The results also were compared with the initial design calculations and with results for a similar thermosyphon. They show that the thermal resistance of the thermosyphon was one-half of that expected--0.2 K/W at a heat flow of 8.0 W. The design calculations also showed that this resistance can be made relatively constant over a wider range of heat flows by making the ratio of evaporator area to condenser area 3:1. The better-than-expected results will translate into reduced integration loss for the ZBO concept.

Plachta, David W.↗

NASA NTRS2022

Plasma Activated Water for Crewed Transit and Planetary Habitation: A Study of Gas Type, Electrode Material, and Power Supply Selection and the Impact on the Final Frontier - FY21 CIF

An in-depth study of plasma activated water (PAW) generation was conducted to link changes in power supply, electrode material, input gas, and treatment time to the resulting reaction chemistry. These changes in chemistry can help tailor PAW for different space applications. An AC, DC, and nanosecond (ns) pulsed power supply were each used to generate PAW with stainless steel, copper, tungsten, or platinum (Pt) electrodes while utilizing air, nitrogen (N2), carbon dioxide (CO2), helium (He), or argon (Ar) as the feed gas. Tap or deionized (DI) water was treated for 1 to 15 minutes, and the generated PAW was tested for changes in pH, conductivity, oxidation reduction potential, nitrates (NO3-), ammonium (NH4+), and peroxide. Calculations showed that the production of reactive nitrogen species was the leading cause of pH and conductivity changes. The DC generated air plasma was able to reduce the pH of DI water and generate NO3‑. The pulsed supply, operating at 20% of the input power of the DC supply, lowered the pH generated NO3‑. When a simulated Martian gas mixture of 95% CO2 and 5% N2 was used as the feed gas, NO3‑ was generated with the DC and pulsed supplies, respectively. Mixing PAW with plasma generated ash from inedible biomass allowed pH control, thus enhancing PAW’s potential use for sanitation applications. The large shift in pH was used to study sanitation effects of Escherichia coli (E. coli) reduction and Staphylococcus aureus (S. aureus), in which log reductions were found to be negligible. Additionally, the plasma generated ash in combination with PAW was also implemented in 10-day microgreen growth trials, in which PAW and ash resulted in quicker emergence of the microgreens compared to the standard growth conditions and comparable dry masses to Hoagland’s nutrient solution treated samples.

plasma activated water (PAW)↗

NASA NTRS2005

High Energy Cutting and Stripping Utilizing Liquid Nitrogen

The Aerospace Industry has endeavored for decades to develop hybrid materials that withstand the rigors of mechanized flight both within our atmosphere and beyond. The development of these high performance materials has led to the need for environmentally friendly technologies for material re-work and removal. The NitroJet(TM) is a fluid jet technology that represents an evolution of the widely used, large-scale water jet fluid jet technology. It involves the amalgamation of fluid jet technology and cryogenics technology to create a new capability that is applicable where water jet or abrasive jet (water jet plus entrained abrasive) are not suitable or acceptable because of technical constraints such as process or materials compatibility, environmental concerns and aesthetic or legal requirements. The NitroJet(TM) uses ultra high-pressure nitrogen to cut materials, strip numerous types of coatings such as paint or powder coating, clean surfaces and profile metals. Liquid nitrogen (LN2) is used as the feed stream and is pressurized in two stages. The first stage pressurizes sub cooled LN2 to an intermediate pressure of between 15,000 and 20,000 psi at which point the temperature of the LN2 is about -250 F. The discharge from this stage is then introduced as feed to a dual intensifier system, which boosts the pressure from 15,000 - 20,000 psi up to the maximum operating pressure of 55,000 psi. A temperature of about -220 F is achieved at which point the nitrogen is supercritical. In this condition the nitrogen cuts, strips and abrades much like ultra high-pressure water would but without any residual liquid to collect, remove or be contaminated. Once the nitrogen has performed its function it harmlessly flashes back into the atmosphere as pure nitrogen gas. The system uses heat exchangers to control and modify the temperature of the various intake and discharge nitrogen streams. Since the system is hydraulically operated, discharge pressures can be easily varied over a very wide range providing considerable flexibility for various operations. The NitroJet(TM) is an advance on the nitrogen fluid jet technology initially developed at the Idaho National Engineering Laboratory in Idaho Falls, Idaho. NitroCision(R) first introduced the NitroJet(TM) into a commercial setting in 2003 and there has been considerable interest from many diverse sectors of government and industry since then. While the current system is an industrial system with the size and mass normally associated with industrial applications, a smaller system that is much more compact is being contemplated for those applications that do not need the full capabilities of the larger system. The NitroJet(TM) can be deployed as a fixed or mobile system with multiple end effectors capable of cutting, stripping, cleaning, and surface profiling either in robotic or manual applications.

Hume, Howard↗

NASA NTRS1989

Techniques for reduced spalling and increased operating life of xenon ion engines

Erosion measurements were performed on a modified J-series 30 cm ion engine operating on xenon propellant. The data indicate that a factor of 15 reduction in erosion of the upstream baffle face can be obtained by introducing nitrogen into the xenon propellant. Minor design changes to reduce spalling coupled with the reduction in baffle erosion may increase the operating life of xenon ion engines.

Garner, Charles E.↗

DOE OSTI2025

Mucilage produced by aerial roots hosts diazotrophs that provide nitrogen in Sorghum bicolor

Sorghum ( Sorghum bicolor ) is an important food, feed, and fodder crop worldwide and is gaining popularity as an energy crop due to its high potential for biomass production. Some sorghum accessions develop many aerial roots and produce an abundant carbohydrate-rich mucilage after rain. This aerial root mucilage is similar to that observed in landraces of maize ( Zea mays ) from southern Mexico, which have been previously shown to host diazotrophs. In this study, we characterized the aerial root development of several sorghum accessions and the impact of humidity on this trait. We conducted a microbiome study of the aerial root mucilage of maize and sorghum and isolated numerous diazotrophs from field sorghum mucilage. We observed that the prevailing phyla in the mucilage were Pseudomonadota, Bacteroidota, and Bacillota. However, bacterial abundances varied based on the genotype and the location. Using acetylene reduction, 15 N 2 gas feeding, and 15 N isotope dilution assays, we confirmed that these sorghum accessions can acquire about 40% of their nitrogen from the atmosphere through these associations on aerial roots. Nitrogen fixation in sorghum aerial root mucilage offers a promising avenue to reduce reliance on synthetic fertilizers and promote sustainable agricultural practices for food, feed, fodder, and bioenergy production.

Venado, Rafael E.↗

NASA NTRS1984

The case for a Martian origin of the shergottites - Nitrogen and noble gases in EETA 79001

Nitrogen and noble gases have been measured in samples of a glass inclusion and its surrounding basaltic matrix in an Antarctic shergottite meteorite (EETA 79001). The nitrogen component was found trapped in the glass, but not the matrix, having a value of delta 15-N = +190 per mil. Ratios between abundances of Ar-40 and N-14, N-15 and N-14 in the glass are consistent with the dilution of a Martian atmospheric component. The trapped noble gases in the glass are similar to elemental and isotopic compositions measured in Mars atmosphere by the Viking lander, and are in general agreement with previous measurements. It is suggested that a sample of Martian atmosphere has been caught in the EETA 79001 glass, and that other shergottite, nakhilite, and chassignite meteorites with similar features probably also originated on Mars. A table is presented which lists the abundances of nitrogen and the noble gases found in the non-glassy matrix and in the EETA 79001 glass.

Becker, R. H.↗

NASA NTRS1972

The impedance characteristic of a spherical probe in an isotropic plasma.

Experimental investigation of the impedance characteristic of a spherical plasma probe for a quantitative assessment of theoretical work, and of hydrodynamic or fluid theory in particular. A stable, low-temperature (about 500K) plasma was produced in nitrogen by a cold-cathode discharge, with a plasma frequency of the order of 15 MHz and with an electron collision frequency in the range from one to ten million per sec. Hydrodynamic probe theory was tested against the experimental results for the specific cases corresponding to the probe at floating potential and at space potential. Good agreement was obtained for both the real and imaginary parts. The real part of the impedance shows a peak near the plasma frequency, a small shift being explicable in terms of realistic sheath profiles. Electron density can thus be deduced rather accurately, and electron temperature approximately, on the basis of hydrodynamic theory. Accurate values of the electron-neutral collision frequency were also obtained for plasmas where the collision frequency was larger than 0.4 times the radian plasma frequency. At lower pressures the presence of collisionless or Landau damping was clearly established, and the more accurate kinetic theory is necessary to explain the experimental results.

Tarstrup, J.↗

NASA NTRS1978

Purging of a tank-mounted multilayer insulation system by gas diffusion

The investigation was conducted on a multilayer insulation (MLI) system mounted on a spherical liquid hydrogen propellant tank. The MLI consisted of two blankets of insulation each containing 15 double-aluminized Mylar radiation shields separated by double silk net spacers. The gaseous nitrogen initially contained within the MLI system and vacuum chamber was purged with gaseous helium introduced both underneath the MLI and into the vacuum chamber. The MLI panels were assumed to be purged primarily by means of gas diffusion. Overall, test results indicated that nitrogen concentrations well below 1 percent could be achieved everywhere within the MLI system. Typical times to achieve 1 percent nitrogen concentration within the MLI panels ranged from 69 minutes at the top of the tank to 158 minutes at the bottom of the tank. Four space-hold thermal performance tests indicated no significant thermal degradation of the MLI system had occurred due to the purge tests conducted. The final measured heat input attributed to the MLI was 7.23 watts as compared to 7.18 watts for the initial baseline thermal performance test.

Sumner, I. E.↗

NASA NTRS1997

Upper Tropospheric/Lower Stratospheric Distribution of Reactive Nitrogen and Ozone

In-situ measurements of a large number of trace chemicals from upper troposphere/lower stratosphere (UT/LS) were performed with the NASA DC-8 aircraft during February/March 1994 over the Pacific Ocean (10 S to 60 N). Mixing ratios in the UT were relatively low in the warm tropical and subtropical air south of the polar jetstream (approx. =28 N) but increased sharply with latitude in the cold polar air north of the jetstream. At about 45 N, high concentrations of PAN (300 ppt) coexisted with extremely low (approx. = 20 ppt) concentrations of NOx. Elevated NOx levels in the UT did not always correspond to continental outflow conditions. Deepest penetrations into the stratosphere (550 ppb O3, 279 ppb NOx, and 350 K potential temperature) corresponded to a region that has been defined as the 'lowermost stratosphere' (LS) by Holton et al. Analysis of data shows that the mixing ratios of long-lived tracer species (e.g., CH4, HNO3, NOy, CFCs, HCFCs) are linearly correlated with those of O3 and N2O. A delta-NOY/delta-O3 of 0.0054 ppb/ppb and delta-NOy/delta-N2O of -0.081 ppb/ppb is in good agreement with other reported measurements from the DC-8. These slopes are however, somewhat steeper than those reported from the ER-2 studies. We find that the reactive nitrogen budget in the UT/LS is largely balanced with shortfalls that are no greater than 15%. A number of oxygenated species (e.g., acetone, H2O2) are present and may provide an important in-situ source of HOx in the UT/LS region.

Singh, H. S.↗

NASA NTRS1994

Summertime distribution of PAN and other reactive nitrogen species in the northern high-latitude atmosphere of eastern Canada

Aircraft measurements of key reactive nitrogen species (NO, NO2, HNO3, PAN, PPN, NO3(-), NO(y)), C1 to C6 hydrocarbons, acetone, O3, chemical tracers (C2Cl4, CO), and important meteorological parameters were performed over eastern Canada during July to August 1990 at altitudes between 0 and 6 km as part of an Arctic Boundary Layer Expedition (ABLE3B). In the free troposphere, PAN was found to be the single most abundant reactive nitrogen species constituting a major fraction of NO(y) and was significantly more abundant than NO(x) and HNO3. PAN and O3 were well correlated both in their fine and gross structures. Compared to data previously collected in the Arctic/subarctic atmosphere over Alaska (ABLE3A), the lower troposphere (0-4 km) over eastern Canada was found to contain larger reactive nitrogen and anthropogenic tracer concentrations. At higher altitudes (4-6 km) the atmospheric composition was in many ways similar to what was seen over Alaska and supports the view that a large-scale reservoir of PAN (and NO(y)) is present in the upper troposphere over the entire Arctic/subarctic region. The reactive nitrogen budget based on missions conducted from the North Bay site (missions 2-10) showed a small shortfall, whereas the budget for data collected from the Goose Bay operation (missions 11-19) showed essential balance. It is calculated that 15-20 ppt of the observed NO(x) may find its source from the available PAN reservoir. Meteorological considerations as well as relationships between reactive nitrogen and tracer species suggest that the atmosphere over eastern Canada during summer is greatly influenced by forest fires and transported industrial pollution.

Singh, H. B.↗

NASA NTRS1992

Measurements of nitrogen productivity in the equatorial Pacific

During the R/V Wecoma WEC88 cruise that sampled a meridional transect along 150 deg W from 15 deg N to 15 deg S, uptake of nitrate and ammonium by phytoplankton was measured using the stable isotope N-15 with simulated in-situ bottle incubations and shipboard mass spectrometry. A set of 25 daily productivity stations showed the influence of equatorial upwelling on nitrate distribution and N-15 uptake in a band from 6 deg N to 7.5 deg S compared with the oligotrophic waters to the north and south, with the highest values of nitrate uptake occurring at the equator. During a 5-day time series at the equator, there was an increase in nitrate accompanied by increased nitrate uptake. Interestingly, nitrate uptake rates (equivalent to new production rates) at the equator were lower than those predicted by previous investigators. Holdover experiments and uptake versus irradiance curves showed that the phytoplankton was in an early stage of metabolic adaptation and that can be a contributing factor.

Wilkerson, Frances P.↗

NASA NTRS1987

Low Reynolds Number Nozzle Flow Study

An experimental study of low Reynolds number nozzle flow was performed. A brief comparison was made between some of the experimental performance data and performance predicted by a viscous flow code. The performance of 15, 20, and 25 deg conical nozzles, bell nozzles, and trumpet nozzles was evaluated with unheated nitrogen and hydrogen. The numerical analysis was applied to the conical nozzles only, using an existing viscous flow code that was based on a slender-channel approximation. Although the trumpet and 25 deg conical nozzles had slightly better performance at lower Reynolds numbers, it is unclear which nozzle is superior as all fell within the experimental error band. The numerical rssults were found to agree with experimental results for nitrogen and for some of the hydrogen data. Some code modification is recommended to improve confidence in the performance prediction.

Whalen, Margaret V.↗