Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NEXAFS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Aromaticity and degree of aromatic condensation of char

The aromatic carbon structure is a defining property of chars and is often expressed with the help of two concepts: (i) aromaticity and (ii) degree of aromatic condensation. The varying extent of these two features is assumed to largely determine the relatively high persistence of charred material in the environment and is thus of interest for, e.g., biochar characterization or carbon cycle studies. Consequently, a variety of methods has been used to assess the aromatic structure of chars, which has led to interesting insights but has complicated the comparison of data acquired with different methods. We therefore used a suite of seven methods (elemental analysis, MIR spectroscopy, NEXAFS spectroscopy, 13 C NMR spectroscopy, BPCA analysis, lipid analysis and helium pycnometry) and compared 13 measurements from them using a diverse sample set of 38 laboratory chars. Here, our results demonstrate that most of the measurements could be categorized either into those which assess aromaticity or those which assess the degree of aromatic condensation. A variety of measurements, including relatively inexpensive and simple ones, reproducibly captured the two aromatic features in question, and data from different methods could therefore be compared. Moreover, general patterns between the two aromatic features and the pyrolysis conditions were revealed, supporting reconstruction of the highest heat treatment temperature (HTT) of char.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room temperature decomposition of dimethyl methylphosphonate on cuprous oxide yields atomic phosphorus

Organophosphorus compounds have a wide range of reactivity depending on the coordination and oxidation state of the P atom. Due to their toxicity, certain organophosphonates are used as pesticides, herbicides, and, notoriously, as chemical nerve agents. The organophosphonate decomposition mechanism depends strongly on the substrate material, which motivates careful analysis of a range of potential materials for decontamination and sensing applications. Here, we present a study of the decomposition of dimethyl methylphosphonate (DMMP), a simulant molecule for the nerve agent sarin, on polycrystalline cuprous oxide surfaces (Cu 2 O). We use ambient pressure X-ray photoelectron spectroscopy (APXPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy to monitor the pressure-dependent surface chemistry during exposure to DMMP vapor. At room temperature, we observe extensive degradation of DMMP, which includes the formation of reduced P products on the sample surface. We identify five unique P-containing species in the P 2p APXPS spectra, including atomic P and a surface-bound phosphinate [O=PH(OCH 3 )Osingle bondCu]. Here we propose a DMMP decomposition pathway whereby accumulation of this phosphinate species leads to an autocatalytic reaction on the Cu 2 O surface which yields reduced P species. After DMMP exposure, heating the Cu 2 O sample to 265°C leads to complete removal of all carbonaceous species and accumulation of a phosphate layer with stoichiometry similar to P 2 O 5 . These results introduce a new mechanism of room-temperature DMMP decomposition on metal oxides, which could be leveraged for the design of tailored metal oxide materials for catalyzing organophosphonate decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Automated Chemical Analysis of Internally Mixed Aerosol Particles Using X-ray Spectromicroscopy at the Carbon K-Edge

We have developed an automated data analysis method for atmospheric particles using scanning transmission X-ray microscopy coupled with near edge X-ray fine structure spectroscopy (STXM/NEXAFS). This method is applied to complex internally mixed submicron particles containing organic and inorganic material. Several algorithms were developed to exploit NEXAFS spectral features in the energy range from 278-320 eV for quantitative mapping of the spatial distribution of elemental carbon, organic carbon, potassium, and non-carbonaceous elements in particles of mixed composition. This energy range encompasses the carbon K-edge and potassium L2 and L3 edges. STXM/NEXAFS maps of different chemical components were complemented with a subsequent analysis using elemental maps obtained by scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM/EDX). We demonstrate application of the automated mapping algorithms for data analysis and the statistical classification of particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stable Postfullerene Solar Cells via Direct C–H Arylation Polymerization. Morphology–Performance Relationships

The scope of the environmentally benign direct C–H arylation polymerization (DARP) process is validated and significantly extended in the synthesis of a high-performance benzodithiophene-based copolymer series, PBDT(Ar)-FTTE, with previously untested and systematically varied heteroaryl (Ar) substituents. Bulk-heterojunction (BHJ) polymer solar cells (PSCs) containing the high-performance nonfullerene acceptor (NFA) ITIC-Th and DARP-derived donors are fabricated and evaluated, yielding PCEs as high as 8%. The relationships between Ar-sensitive copolymer structure, BHJ morphology, and PSC performance are elucidated through in-depth characterization of structural order, phase separation, and charge transport using SCLC, AFM, GIWAXS, R-SoXS, and NEXAFS measurements, which conclusively demonstrate the important effects of Ar-tunable, dimensionally smaller, and well-blended copolymer domains for maximum PSC performance. Smaller BHJ copolymer domains having greater ITIC-Th miscibility definitively correlate with enhanced JSC, FF, and PCE metrics. Surprisingly regarding cell performance durability, while unencapsulated PBDTT-FTTE:ITIC-Th PSCs deliver the highest initial PCE, the unencapsulated PBDTTF-FTTE:ITIC-Th devices exhibit the optimum combination of high initial photovoltaic metrics and stability, retaining nearly 90% of the initial PCE after 51 days in ambient conditions and 83% of initial PCE after 180 min under simulated solar illumination. Importantly, for this PBDT(Ar)-FTTE:ITIC-Th series, PSC photovoltaic stability correlates with the presence of large pure BHJ domains, and moreover rivals or exceeds the stability of the analogous fullerene-based PSCs. Together, the results argue that solar cells prepared with the environmentally benign DARP process and NFAs are promising for both greener and more stable solar energy generation.

36 MATERIALS SCIENCE↗

Probing Alkylpolyglycoside Hydrogen Bonding and Its Destabilization by Sulfonate Hydrotropes with X‑ray and Vibrational Spectroscopy

It has been proposed that intersurfactant H-bonding networks can produce highly stable foams, specifically those generated from solutions containing alkylpolyglycoside surfactants. In this work, we aim to characterize the presence and destabilization of these networks by introducing a hydrotrope (sodium p-toluene sulfate) at various concentrations into an alkylpolyglycoside (Glucopon 225 DK) surfactant containing solution. Solution surface properties are probed by using aerosol velocity map imaging X-ray photoelectron spectroscopy (A-VMI-XPS) and tensiometer measurements. Bulk properties below the surface are probed using Fourier transform infrared spectroscopy (FTIR) and C-edge near-edge X-ray fine structure spectroscopy (NEXAFS). The surface measurements provide the framework to describe the destabilization of the solution H-bonding network, while the bulk solution measurements provide hints about the disruption of the hydrogen bonding network upon hydrotrope addition. The collected data support the hypothesis that the destabilization of the intersurfactant H-bonding network frees surfactant molecules from the bulk, increasing surfactant population at the air/water interface. This was quantified through an increase in peak area and width in XPS measurements as well as a decrease in surfactant critical micelle concentration. Three regimes with increasing amounts of hydrotrope addition are suggested, described as (1) a hydrotrope affecting only surfactant surface properties, (2) a hydrotrope affecting surfactant surface and bulk properties, and (3) hydrotrope-dominated surface and bulk properties. Future studies will characterize foam stability across the hydrotrope concentration regimes to better define correlations between intersurfactant H-bonding networks and foam stability.

Molecules↗

Thiophene Derivatives on Gold and Molecular Dissociation Processes

Here, we report a systematic study of thiophene derivatives on gold surfaces. These molecules are of interest in molecular electronics, and the characracteristics of the thiophene–electrode interface in devices needs to be understood as it affects electron transport characteristics. Some experiments indicated S–C bond scission in contact with metals resulting in disruption of the $π$-electron system that affects charge transport, which would also be affected by presence of split-off chemisorbed sulfur. We explored this dissociation aspect by photoemission for the case of monocrystalline Au(111) surfaces and Au films grown on mica for a series of polythiophenes molecules ( n T, n = 1–4, 6) as well as for α,ω-diquaterthiophene (DH 4 T) and dihexylsexithiophene (DH6T). The S 2p X-ray photoelectron spectroscopy peaks are found to have complex line shapes corresponding to S atoms with different core level binding energies (CLBE). Density functional theory calculations of adsorption energies and CLBEs were performed for various adsorption configurations of thiophene on a perfect Au(111) plane and for comparison, calculations were also performed for bithiophene, terthiophene, alkenethiol, alkenethiol chain, and a broken thiophene related metallocycle, incorporating an Au adatom and an S atom. On the basis of these results we relate the different contributions to the S 2p peak to intact molecules on different adsorption sites and broken molecules. Calculations in particular show that the CLBEs for intact thiophene (1T) can be the same as for the alkene and alkanethiol cases as opposed to usual assumptions in the literature. The existence of intact thiophenes is confirmed by the presence of clear $π$ resonance peaks in the near edge X-ray fine structure (NEXAFS) spectra. Spontaneous dissociation appears to a variable extent in different samples, and we tentatively relate this to the presence of a more or less large number of steps and defects sites. X-ray induced beam damage was investigated for 1T and 3T using an intense synchrotron beam of 260 eV photons, and showed changes in the S 2p spectra related to S–C bond scission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fraction of Free-Base Nicotine in Simulated Vaping Aerosol Particles Determined by X-ray Spectroscopies

A new generation of electronic cigarettes is exacerbating the youth vaping epidemic by incorporating additives that increase the acidity of generated aerosols, which facilitate uptake of high nicotine levels. We need to better understand the chemical speciation of vaping aerosols to assess the impact of acidification. Here we used X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy to probe the acid-base equilibria of nicotine in hydrated vaping aerosols. Here we show that, unlike the behavior observed in bulk water, nicotine in the core of aqueous particles was partially protonated when the pH of the nebulized solution was 10.4, with a fraction of free-base nicotine (α FB ) of 0.34. Nicotine was further protonated by acidification with equimolar addition of benzoic acid (α FB = 0.17 at pH 6.2). By contrast, the degree of nicotine protonation at the particle surface was significantly lower, with 0.72 < α FB < 0.80 in the same pH range. The presence of propylene glycol and glycerol completely eliminated protonation of nicotine at the surface (α FB = 1) while not affecting significantly its acid-base equilibrium in the particle core. These results provide a better understanding of the role of acidifying additives in vaping aerosols, supporting public health policy interventions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Resonant Tender X-ray Scattering for Disclosing the Backbone Conformation of Conjugated Polymers

The backbone conformation of conjugated polymers (CPs) is essential to their performance in electronic applications. Contrast-variation small-angle neutron scattering (CV-SANS) techniques were used to assess the CP’s backbone conformation, which relies on synthesis of deuterated polymers. Such a technique has been proven mature and effective. One drawback is that deuteration labeling might subtly alter polymer’s physical properties due to structural modifications. To address these challenges, we introduce a novel approach utilizing tender Xray scattering near the sulfur K-edge to distinctly evaluate the backbone versus whole chain conformation for a low-bandgap donor−acceptor CP, poly[(5,6-difluoro- 2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3‴-dialkyl-2,2′;5′,2″;5″,2‴-quaterthiophen-5,5‴- diyl)] (PffBT4T). For PffBT4T dissolved in trimethylbenzene (TMB), the sulfur K-edge is identified at approximately 2477 eV using near-edge X-ray absorption fine structure spectroscopy (NEXAFS). Tender X-ray scattering conducted at presulfur K-edge and on-sulfur K-edge at elevated temperatures facilitated the distinction between the backbone and whole chain conformations. The results demonstrate that for highly flexible polymer, the backbone’s persistence length could be lower than that of the whole chains, suggesting a more flexible backbone. This rapid, label-free method enhances our ability to characterize CP’s backbone conformation efficiently, offering significant implications for the design and optimization of CPs for advanced electronics.

36 MATERIALS SCIENCE↗

Distinct Surface and Bulk Morphology Due to Solvent Additive Effects in PM6 Conjugated Polymer Films

Depth dependent molecular orientation and crystalline structure in conjugated polymer thin films is critical for organic electronic device performance and is affected by solvent additive choice during processing. Here, in this work, we focus on the electron donor polymer PM6 and uncover how the solvent additive 1-chloronaphthalene (CN) affects the molecular orientation and the crystalline structure with near edge X-ray absorption fine structure (NEXAFS) spectroscopy and grazing-incidence wide-angle X-ray scattering (GIWAXS), respectively. By quantitatively comparing molecular and crystallite orientations, we find that CN induces distinct surface and bulk morphologies. The polymer conjugated plane orientation at the surface is unaffected by CN, while this orientation is strongly affected in the bulk. Further, we find differences in surface vs bulk crystalline coherence lengths and relative degrees of crystallinity. These insights help provide links between solvent additive and device performance and demonstrate the strengths of a quantitative approach for characterizing organic thin film morphology.

36 MATERIALS SCIENCE↗

Underwater Organic Solar Cells via Selective Removal of Electron Acceptors near the Top Electrode

Electron acceptor degradation of organic solar cells is considered a main contributor to performance instability and a barrier for the commercialization of organic solar cells. In this work, we selectively remove the electron acceptors on the surface of donor:acceptor blend films using a tape stripping technique. The near-edge X-ray absorption fine structure (NEXAFS) spectrum reveals that only 6% of the acceptor component is left on the blend film surface after the tape stripping, creating a polymer-rich surface. The optimized morphology avoids direct contact of electron acceptors with the oxygen and water molecules from the film surface. Moreover, the polymer-rich surface dramatically enhances the adhesion between the photoactive layer and the top metal electrode, which prevents delamination of the electrode. Our results finally show that the selective removal of electron acceptors near the top electrode facilitates the realization of highly durable organic solar cells that can even function under water without encapsulation.

14 SOLAR ENERGY↗

Antimicrobial Behavior of Semifluorinated-Quaternized Triblock Copolymers against Airborne and Marine Microorganisms

Semifluorinated-quaternized triblock copolymers (SQTCs) were synthesized by chemical modification of polystyrene-block-poly(ethylene-ran-butylene)-block-polyisoprene ABC triblock copolymers. Surface characterization of the polymers was performed by X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) analysis. The surface of the SQTC showed very high antibacterial activity against the airborne bacterium Staphylococcus aureus with >99 % inhibition of growth. In contrast in marine fouling assays, zoospores of the green alga Ulva settled on the SQTC, which can be attributed to the positively charged surface. The adhesion strength of sporelings (young plants) of Ulva and Navicula diatoms (a unicellular alga) was high. The SQTC did not show marked algicidal activity.

36 MATERIALS SCIENCE↗

Triblock Copolymers with Grafted Fluorine-Free Amphiphilic Non-Ionic Side Chains for Antifouling and Fouling-Release Applications

Fluorine-free, amphiphilic, nonionic surface active block copolymers (SABCs) were synthesized through chemical modification of a polystyrene-block-poly(ethylene-ran-butylene)-block-polyisoprene triblock copolymer precursor with selected amphiphilic nonionic Brij and other surfactants. Amphiphilicity was imparted by a hydrophobic aliphatic group combined with a hydrophilic poly(ethylene glycol) (PEG) group-containing moiety. The surfaces were characterized by dynamic water contact angle, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and near edge X-ray absorption fine structure (NEXAFS) analysis. In biofouling assays, settlement (attachment) of both spores of the green alga Ulva and cells of the diatom Navicula on SABCs modified with Brij nonionic side chains was significantly reduced relative to a PDMS standard, with a nonionic surfactant combining a PEG group and an aliphatic moiety demonstrating the best performance. Additionally, a fouling-release assay using sporelings (young plants) of Ulva and Navicula suggested that the SABC derived from nonionic Brij side chains also out-performed PDMS as a fouling-release material. Good antifouling and fouling-release properties were not demonstrated for the other two amphiphilic surfaces derived from silicone and aromatic group containing nonionic surfactants included in this study. The results suggest that small differences in chemical surface functionality impart more significant changes with respect to the antifouling settlement and fouling-release performance of materials than overall wettability behavior.

36 MATERIALS SCIENCE↗

Spectromicroscopy of C 60 and azafullerene C 59 N: Identifying surface adsorbed water

C 60 fullerene crystals may serve as important catalysts for interstellar organic chemistry. To explore this possibility, the electronic structures of free-standing powders of C 60 and (C 59 N) 2 azafullerenes are characterized using X-ray microscopy with near-edge X-ray adsorption fine structure (NEXAFS) spectroscopy, closely coupled with density functional theory (DFT) calculations. This is supported with X-ray photoelectron spectroscopy (XPS) measurements and associated core-level shift DFT calculations. We compare the oxygen 1s spectra from oxygen impurities in C 60 and C 59 N, and calculate a range of possible oxidized and hydroxylated structures and associated formation barriers. These results allow us to propose a model for the oxygen present in these samples, notably the importance of water surface adsorption and possible ice formation. Water adsorption on C 60 crystal surfaces may prove important for astrobiological studies of interstellar amino acid formation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Insights into the sonochemical synthesis and properties of salt-free intrinsic plutonium colloids

Fundamental knowledge on intrinsic plutonium colloids is important for the prediction of plutonium behaviour in the geosphere and in engineered systems. The first synthetic route to obtain salt-free intrinsic plutonium colloids by ultrasonic treatment of PuO 2 suspensions in pure water is reported. Kinetics showed that both chemical and mechanical effects of ultrasound contribute to the mechanism of Pu colloid formation. In the first stage, fragmentation of initial PuO 2 particles provides larger surface contact between cavitation bubbles and solids. Furthermore, hydrogen formed during sonochemical water splitting enables reduction of Pu(IV) to more soluble Pu(III), which then re-oxidizes yielding Pu(IV) colloid. A comparative study of nanostructured PuO 2 and Pu colloids produced by sonochemical and hydrolytic methods, has been conducted using HRTEM, Pu LIII-edge XAS, and O K-edge NEXAFS/STXM. Characterization of Pu colloids revealed a correlation between the number of Pu-O and Pu-Pu contacts and the atomic surface-to-volume ratio of the PuO 2 nanoparticles. NEXAFS indicated that oxygen state in hydrolytic Pu colloid is influenced by hydrolysed Pu(IV) species to a greater extent than in sonochemical PuO 2 nanoparticles. In general, hydrolytic and sonochemical Pu colloids can be described as core-shell nanoparticles composed of quasi-stoichiometric PuO 2 cores and hydrolyzed Pu(IV) moieties at the surface shell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of Adsorbed Alkali Ions on Photoelectrochemical Hydrogen Production by Titania Nanotubes

While titaniananotubes are expected to have important applications in the photoelectrochemical production of hydrogen, it is found that surface-adsorbed ions on the nanotube surface, specifically alkali ions, have a significant impact on the photoelectrochemical water-splitting characteristics. Such surface-adsorbed alkali ions are invariably a result of the electrochemical fabrication process which uses an alkali-based electrolyte for the production of vertically aligned array of titaniananotubes. The presence of surface-adsorbed ions is revealed in synchrotron-based near edge X-ray absorption fine structure (NEXAFS) studies. Photoelectrochemical behavior of such surface-adsorbed titaniananotubes is found to be significantly altered when compared with pure titaniananotubes which may be explained in terms of a simple phenomenological model predicting modifications to the energy band structure of titania as a result of surface adsorption.

08 HYDROGEN↗

New Poly(dimethylsiloxane)/Poly(perfluorooctylethyl acrylate) Block Copolymers: Structure and Order Across Multiple Length Scales in Thin Films

Three sets of a new class of low surface tension block copolymers were synthesized consisting of a poly(dimethylsiloxane) (PDMS) block and a poly(perfluorooctylethyl acrylate) (AF8) block. The polymers were prepared using a bromo-terminated PDMS macroinitiator, to which was attached an AF8 block grown using atom transfer radical polymerization (ATRP) in such a designed way that the molecular weight and composition of the two polymer blocks were regularly varied. The interplay of both the phase separated microstructure and the mesomorphic character of the fluorinated domains with their effect on surface structure was evaluated using a suite of analytical tools. Surfaces of spin-coated and thermally annealed films were assessed using a combination of X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) studies. Both atomic force microscopy (AFM) measurements and grazing incidence small angle X-ray scattering (GISAXS) studies were carried out to evaluate the microstructure of the thin films. Even in block copolymers in which the PDMS block was the majority component, a significant presence of the lower surface energy AF8 block was detected at the film surface. Moreover, the perfluorooctyl helices of the AF8 repeat units were highly oriented at the surface in an ordered, tilted smectic structure, which was compared with those of the bulk powder samples using wide-angle X-ray powder diffraction (WAXD) studies.

36 MATERIALS SCIENCE↗