Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NEW FUELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Fabrication and Pre-irradiation Characterization of a Minor Actinide and Rare Earth Containing Fast Reactor Fuel Experiment for Irradiation in the Advanced Test Reactor

The United States Department of Energy, seeks to develop and demonstrate the technologies needed to transmute the long-lived transuranic actinide isotopes contained in spent nuclear fuel into shorter lived fission products, thereby decreasing the volume of material requiring disposal and reducing the long-term radiotoxicity and heat load of high-level waste sent to a geologic repository. This transmutation of the long lived actinides plutonium, neptunium, americium and curium can be accomplished by first separating them from spent Light Water Reactor fuel using a pyro-metalurgical process, then reprocessing them into new fuel with fresh uranium additions, and then transmuted to short lived nuclides in a liquid metal cooled fast reactor. An important component of the technology is developing actinide-bearing fuel forms containing plutonium, neptunium, americium and curium isotopes that meet the stringent requirements of reactor fuels and materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of Low Temperature Reactions in the Standard Cooperative Fuel Research (CFR) Engine

A number of proposals for fuel rating in spark ignition (SI) engine have been suggested till date and still no consensus on this has been reached. The automobile industry is continuing to use RON and MON tests for rating fuels, and still there exists a need to come up with new fuel rating systems. The fuel’s knocking tendency in SI engines is mainly governed by the end-gas autoignition. Another combustion mode, homogeneous charge compression ignition (HCCI), is also driven by autoignition of the complete charge inside the cylinder. Fundamentally, the combustion process in both combustion modes is driven by autoignition, and HCCI combustion mode can be used to understand the knocking behavior in SI engines. The lean combustion environment in HCCI mode provides a good platform to replicate the operating conditions of modern SI engines, which are operating at boosted pressures and low intake temperatures, and understanding of the fuel knocking behavior under such conditions is vital for achieving high-efficient engines. Therefore in this study, HCCI combustion will be used in the standard CFR engine to understand the autoignition behavior of the fuels for SI engines. For this purpose, three fuel blends were selected, which had the research octane number equal to 90. The standard CFR engine was operated with varying intake pressures and temperatures under HCCI combustion mode. The Lund-Chevron HCCI fuel number was used to rate the fuels and this was compared with RON and MON of the blends. It was found that HCCI combustion could be used to rate the fuels with the standard CFR engine with minor modifications to accommodate the boosted conditions without affecting the geometry and the flow inside the CFR engine. Low temperature reactions were observed and were correlated with the Lund-Chevron HCCI fuel numbers.

33 ADVANCED PROPULSION SYSTEMS↗

A Perspective on the Future of High Efficiency Engines

New fuel economy standards and emissions regulations are accelerating the development of new engine technologies, sensors, and on-board computing. These developments will enable unprecedented engine control, which will in turn enable real-world implementations of low temperature combustion, high-speed controls, and other high efficiency engine technologies. With this expanded flexibility in engine design and control, the challenge will now be the exponential increase in the design and calibration space and the need for the development of new simulations, optimization methods, and self-learning control methodologies. This manuscript provides historical and future perspectives on the opportunities and challenges of this unparalleled technology growth on the next generation of high efficiency engines.

Wagner, Robert M↗

Transition Analysis of Promising U.S. Future Fuel Cycles Using ORION

The US Department of Energy Office of Fuel Cycle Technologies performed an evaluation and screening (E&S) study of nuclear fuel cycle options to help prioritize future research and development decisions. Previous work for this E&S study focused on establishing equilibrium conditions for analysis examples of 40 nuclear fuel cycle evaluation groups (EGs) and evaluating their performance according to a set of 22 standardized metrics. Following the E&S study, additional studies are being conducted to assess transitioning from the current US fuel cycle to future fuel cycle options identified by the E&S study as being most promising. These studies help inform decisions on how to effectively achieve full transition, estimate the length of time needed to undergo transition from the current fuel cycle, and evaluate performance of nuclear systems and facilities in place during the transition. These studies also help identify any barriers to achieve transition. Oak Ridge National Laboratory (ORNL) Fuel Cycle Options Campaign team used ORION to analyze the transition pathway from the existing US nuclear fuel cycle—the once-through use of low-enriched-uranium (LEU) fuel in thermal-spectrum light water reactors (LWRs) —to a new fuel cycle with continuous recycling of plutonium and uranium in sodium fast reactors (SFRs). This paper discusses the analysis of the transition from an LWR to an SFR fleet using ORION, highlights the role of lifetime extensions of existing LWRs to aid transition, and discusses how a slight delay in SFR deployment can actually reduce the time to achieve an equilibrium fuel cycle.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Methodology for Loading the Advanced Test Reactor Driver Core for Experiment Analysis

The Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL) is one of the premier irradiation facilities in the world. The ATR hosts experiments from a variety of laboratories, companies, and disciplines. Because of its flexibility in providing customized irradiation conditions to experiments, such as coolant chemistry, temperature, and reactor power, analysis for experiments, both from a programmatic and safety perspective, can be a challenging endeavor. Because of these experiment variables, there is always an effort to improve upon the existing analysis methodology in order to provide the sponsor of any given experiment with the most accurate predictions possible. The paper discusses the effort to improve upon the methodology for loading the ATR driver core for experiment analysis. Experiment analysis at INL is generally broken up into three separate disciplines: neutronics, thermal-hydraulics, and structural. The focus of this paper is neutronics analysis. After the experiment has a preliminary design, the neutronics analyst will create a model in the Monte Carlo N-Particle (MCNP) transport code to calculate fuel and material heating rates from MCNP tallies and provide those to the thermal-hydraulics analyst, and calculate reactivity worths, perturbation on the axial fission profile of the ATR driver core by the experiment, void worths, and experiment backup worths. Also, there are usually several programmatic parameters that the experiment sponsor requests that the neutronics analyst calculates. These can include heat generation rates, burnup and displacements per atom (DPA). In order to accurately analyze these parameters, an important input into the physics analyst's MCNP model is the loading of the ATR driver core. The ATR driver core consists of 40, 19-plate highly-enriched uranium (HEU) fuel elements, arranged in a serpentine shape, as pictured in Figure 1. The ATR driver core is responsible for the vast majority of the thermal power of the reactor and the nuclear interactions with the experiments being irradiated in ATR. A unique feature of ATR is the 'power tilt' across the reactor. A power tilt means that the Northwest, Northeast, Southwest, and Southeast Lobes of ATR frequently operate at different powers, providing different irradiation conditions for the experiments in and around the lobes of the reactor. In order to achieve lobe power splits, different fuel elements for each of the 40 positions are chosen by ATR Reactor Engineering so that lobe power splits can be maintained during an operating cycle. A typical fuel loading for an ATR cycle consists of 14 to 18 new fuel elements and 2 to 26 depleted fuel elements. These loadings are typically chosen from three different types of fuel elements. All three ATR fuel element types share a common design, spelled out in Chapter 4 of the ATR Safety Analysis Report (SAR). The fuel element meat is HEU UAlx dispersion fuel sandwiched between aluminum cladding with a length of 121.92 cm (4 ft), with 19 plates per fuel element. The three variations of this common design are designated by the first two letters in their serial numbers: XA, YA, and NB. XA elements are most commonly used. These elements have nominally 1075 g of uranium-235 and 0.66 g of boron-10. The NB elements have the same uranium-235 loading as the XA elements, but no boron in any plates. These elements are used when excess reactivity is needed. The YA elements have the same loading as the XA elements, except that the outermost plate (Plate 19) has no boron or uranium. These elements are used to mitigate aged reflector damage. In order to accurately model the ATR driver core, all three types of fuel elements must be accounted for in the MCNP model. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Theoretical Investigation of the Chemical Behaviour of Irradiated U-Mo/Mg Fuel

A significant international effort has been put forth to replace Highly Enriched Uranium (HEU) fuel used in research and test reactors with Low Enriched Uranium (LEU) fuel to reduce proliferation concerns. Furthermore, some fuel processing issues have been encountered with some LEU candidate fuel designs. In order to address both of the foregoing issues, new fuel designs must be developed. One of these designs has U-Mo particles dispersed in a Mg matrix (U-Mo/Mg) that is cladded in an Al-alloy. While characterization analyses and thermophysical measurements have been reported for fresh U-Mo/Mg fuel, the effects of irradiation are not yet well known nor are they understood. Given that earlier international campaigns that investigated U-Mo/Al as a candidate fuel design resulted in consistent failures due to the formation of an interaction layer between the U-Mo fuel particles and Al meat, it seems prudent to theorize and predict any phases that may form as a result of irradiation of U-Mo/Mg fuel. The formation of these phases and any interaction that they may have with the cladding may potentially affect the reliability of this fuel design. This short paper provides a preliminary theoretical framework for the prediction of minor phases that may appear in irradiated U-Mo/Mg research reactor fuel, which should be confirmed via postirradiation examination at a later time.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Artificial neural network based predictions of cetane number for furanic biofuel additives

The next generation of alternative fuels is being explored through advanced chemical and biological production techniques for the purpose of finding suitable replacements for diesel and gasoline while lowering production costs and increasing process yields. Chemical conversion of biomass to fuels offers a plethora of pathways with a variety of fuel molecules, both novel and traditional, which may be targeted. In the search for new fuels, an initial, intuition-driven evaluation of fuel compounds with desired properties is required. Due to the high cost and significant production time needed to synthesize these materials at a scale sufficient for exhaustive testing, a predictive model would allow chemists to preemptively screen fuel properties of potentially desirable fuel candidates. Current work has shown that predictive models, in this case artificial neural networks (ANN's) analyzing quantitative structure property relationships (QSPR's), can predict the cetane number (CN) of a proposed fuel molecule with relatively small error. A fuel's CN is a measure of its ignition quality, typically defined using prescribed ASTM standards and a cetane testing engine. Alternatively, the analogous derived cetane number (DCN), obtained using an Ignition Quality Tester (IQT), is a direct measurement alternative to the CN that uses an empirical inverse relationship to the ignition delay found in the constant volume combustion chamber apparatus. DCN data points acquired using an IQT were utilized for model validation and expansion of the experimental database used in this study. The present report improves on an existing model by optimizing the model architecture along with the key learning variables of the ANN and by making the model more generalizable to a wider variety of fuel candidate types, specifically the class of furans and furan derivatives, by including specific molecules for the model to incorporate. The new molecules considered include tetrahydrofuran, 2-methylfuran, 2-methyltetrahydrofuran, 5,5'-(furan-2-ylmethylene)bis(2-methylfuran), 5,5'-((tetrahydrofuran-2-yl)methylene)bis(2-methyltetrahydrofuran), tris(5-methylfuran-2-yl)methane, and tris(5-methyltetrahydrofuran-2-yl)methane. Model architecture adjustments improved the overall root-mean-square error (RMSE) of the base database predictions by 5.54%. Additionally, through the targeted database expansion, it is shown that the predicted cetane number of the furan-based molecules improves on average by 49.21% (3.74 CN units) and significantly for a few of the individual molecules. This indicates that a selected subset of representative molecules can be used to extend the model's predictive accuracy to new molecular classes. The approach, bolstered by the improvements presented in this paper, enables chemists to focus on promising molecules by eliminating less favorable candidates in relation to their ignition quality.

09 BIOMASS FUELS↗

Preliminary Analysis of Advanced Reactor Spent Nuclear Fuel Storage, Transportation, and Disposal

Due to increased interest in advanced reactor deployment and their associated potential new fuel cycles, the U.S. Department of Energy (DOE) Spent Fuel and Waste Science and Technology (SFWST) program has begun to evaluate the possible implications of long term management and final disposition of the spent nuclear fuel (SNF) generated. Safely managing and dispositioning this SNF, along with any other associated radioactive waste, is the primary focus of this initial preliminary assessment. This paper summarizes efforts to evaluate the characteristics and packaging options for three types of advanced reactor SNF forms: (1) tristructural isotropic (TRISO), (2) metallic, and (3) irradiated fuel salt presented in the report titled “Storage, Transportation, and Disposal of Advanced Reactor Spent Nuclear Fuel and High-Level Waste”. TRISO and metallic SNF and their associated waste streams were emphasized because of the near-term anticipated demonstrations of X-energy’s Xe-100 and TerraPower and GE Hitachi’s Natrium advanced reactors. Preliminary information on spent fuel salts discharged from molten-salt reactors (MSRs) was also examined to provide a baseline for future efforts. All calculations and assumptions were based on publicly available information. This paper identifies several different reactors that produce either TRISO or metallic SNF as well as a few of the reactor and fuel characteristics used for the assessments. Based on these characteristics, calculations were performed to determine the applicability of packaging SNF into existing canister designs. The evaluations included geometric (e.g., dimension, volume) and mass/weight considerations, known operational approaches and loading procedures, physical and chemical considerations/conditions for storage environments, and as-loaded radiation, thermal, and criticality analyses to identify constraints on storage, transportation, and disposal. Gaps in publicly available data pertaining to reactor operation and/or fuel composition provide increased uncertainty in some evaluations. Additionally, uncertainty in packaging and SNF management operations provide additional uncertainty. However, preliminary conclusions can still be assessed through this work and are presented in this paper.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Experimental results of conductive inserts to reduce nuclear fuel temperature during nuclear volumetric heating

Advanced fuel designs that incorporate thinner fuel UO2 pellets interspaced by high thermal conductivity inserts have been proposed, with the primary goals of reducing peak centerline temperatures and temperature gradients across fuel pellets and enhancing heat transfer from the fuel to the coolant. An initial series of experiments has been performed on this design, including laboratory experiments and a series of experiments using the Idaho National Laboratory (INL) Transient Reactor Test (TREAT) Facility, the latter of which compared thermal gradient driven fracture of standard pellet designs with that in the proposed advanced fuel design. Although reducing fracture is not the primary objective of the new fuel design, the lower thermal gradients are expected to reduce fracture, so it can serve as an indicator of the thermal behavior of this fuel in the reactor. The in-reactor tests were conducted at multiple linear heat generation rates and confirm the expected result that fracture in both the standard and advanced fuel pellets occurs during the first ramp to power in standard light-water reactor conditions. Post-irradiation examination of the experiment material was performed and included quantification of the extent of fracture in the fuel pellets. It was found that the advanced-design pellets reduce the extent of fracture in a statistically significant way. This confirms the expected behavior predicted by two-dimensional axisymmetric models of this experiment. Here in this study is an important first experimental confirmation of the efficacy of the proposed inserts for achieving their desired effect on the thermal behavior of the fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Investigating the Combustion Performance of Dual Fuel Combustion with Diesel and Port Injected Hydrogen in a Large Bore Locomotive Engine

The heavy-duty transportation sector has primarily relied on conventional diesel combustion engines given their reliability and high thermal efficiency relative to spark ignition engines, but increased focus on reducing greenhouse gas emissions has led to investigation into alternative fuels. Gaseous hydrogen fuel has garnered a great deal of recent interest in the engine community given it has zero carbon, but hydrogen is not available at the scale and cost that petroleum fuels are currently available, and this is a barrier to adoption for industries that are looking to decarbonize their operations. Because of the fuel flexibility provided, dual fuel technology offers a pathway for some industries to adopt hydrogen as a fuel source while maintaining sufficient flexibility in times and locations where the new fuel is not yet available. This computational study investigates dual fuel combustion in a large bore locomotive engine architecture using direct injected diesel and port injected gaseous hydrogen fuel. With an optimal port fuel injection configuration from previous work, simulations of varying substitution ratio, compression ratio, manifold air temperature, diesel injection timing, and diesel injection pressure were performed to understand their effect on combustion performance. Results indicated that both increased substitution ratio and higher intake air temperature accelerates hydrogen flame propagation and can result in high peak cylinder pressures. Additionally, diesel injection timing and injection pressure were demonstrated as effective methods for controlling dual fuel combustion heat release rates.

ODonnell, Patrick Christopher↗

Fuel Flexible Turbine System (FFTS) Program

In this fuel flexible turbine system (FFTS) program, the Parker gasification system was further optimized, fuel composition of biomass gasification process was characterized and the feasibility of running Capstone MicroTurbine(TM) systems with gasification syngas fuels was evaluated. With high hydrogen content, the gaseous fuel from a gasification process of various feed stocks such as switchgrass and corn stover has high reactivity and high flashback propensity when running in the current lean premixed injectors. The research concluded that the existing C65 microturbine combustion system, which is designed for natural gas, is not able to burn the high hydrogen content syngas due to insufficient resistance to flashback (undesired flame propagation to upstream within the fuel injector). A comprehensive literature review was conducted on high-hydrogen fuel combustion and its main issues. For Capstone's lean premixed injector, the main mechanisms of flashback were identified to be boundary layer flashback and bulk flow flashback. Since the existing microturbine combustion system is not able to operate on high-hydrogen syngas fuels, new hardware needed to be developed. The new hardware developed and tested included (1) a series of injectors with a reduced propensity for boundary layer flashback and (2) two new combustion liner designs (Combustion Liner Design A and B) that lead to desired primary zone air flow split to meet the overall bulk velocity requirement to mitigate the risk of core flashback inside the injectors. The new injector designs were evaluated in both test apparatus and C65/C200 engines. While some of the new injector designs did not provide satisfactory performance in burning target syngas fuels, particularly in improving resistance to flashback. The combustion system configuration of FFTS-4 injector and Combustion Liner Design A was found promising to enable the C65 microturbine system to run on high hydrogen biomass syngas. The FFTS-4 injector was tested in a C65 engine operating on 100% hydrogen and with the redesigned combustion liner - Combustion Liner Design A - installed. The results were promising for the FFTS program as the system was able to burn 100% hydrogen fuel without flashback while maintaining good combustion performance. While initial results have been demonstrated the feasibility of this program, further research is needed to determine whether these results will be repeated with FFTS-4 injectors installed in all injector ports and over a wide range of operating conditions and fuel variations.

42 ENGINEERING↗

Computer-Aided Construction of Chemical Kinetic Models

The combustion chemistry of even simple fuels can be extremely complex, involving hundreds or thousands of kinetically significant species. The most reasonable way to deal with this complexity is to use a computer not only to numerically solve the kinetic model, but also to construct the kinetic model in the first place. Because these large models contain so many numerical parameters (e.g. rate coefficients, thermochemistry) one never has sufficient data to uniquely determine them all experimentally. Instead one must work in “predictive” mode, using theoretical rather than experimental values for many of the numbers in the model, and as appropriate refining the most sensitive numbers through experiments. Predictive chemical kinetics is exactly what is needed for computer-aided design of combustion systems based on proposed alternative fuels, particularly for early assessment of the value and viability of proposed new fuels before those fuels are commercially available. This project was aimed at making accurate predictive chemical kinetics practical; this is a challenging goal which requires a range of science advances. The project spanned a wide range from quantum chemical calculations on individual molecules and elementary-step reactions, through the development of improved rate/thermo calculation procedures, the creation of algorithms and software for constructing and solving kinetic simulations, the invention of methods for model-reduction while maintaining error control, and finally comparisons with experiment. Many of the parameters in the models were derived from quantum chemistry calculations, and the models were compared with experimental data measured in our lab or in collaboration with others.

97 MATHEMATICS AND COMPUTING↗

Cracking in first ramp to power of standard versus high thermal conductivity UO2 pellets via internal nuclear heating

Advanced fuel designs that incorporate thinner fuel UO2 pellets interspaced by high thermal conductivity inserts have been proposed, with the primary goals of reducing peak centerline temperatures and temperature gradients across fuel pellets and enhancing heat transfer from the fuel to the coolant. An initial series of experiments has been performed on this design, including laboratory experiments and a series of experiments using the Idaho National Laboratory (INL) Transient Reactor Test (TREAT) Facility, the latter of which compared thermal gradient driven fracture of standard pellet designs with that in the proposed advanced fuel design. Although reducing fracture is not the primary objective of the new fuel design, the lower thermal gradients are expected to reduce fracture, so it can serve as an indicator of the thermal behavior of this fuel in the reactor. The in-reactor tests were conducted at multiple linear heat generation rates and confirm the expected result that fracture in both the standard and advanced fuel pellets occurs during the first ramp to power in standard light-water reactor conditions. Post-irradiation examination of the experiment material was performed and included quantification of the extent of fracture in the fuel pellets. It was found that the advanced-design pellets reduce the extent of fracture in a statistically significant way. This confirms the expected behavior predicted by two-dimensional axisymmetric models of this experiment. This study is an important first experimental confirmation of the efficacy of the proposed inserts for achieving their desired effect on the thermal behavior of the fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Molten Salt Reactor Simulation Capability Using MPACT

The recent interest in molten salt reactor technology by the nuclear industry has sparked significant interest in developing modeling and simulation tools for molten salt reactors. The MPACT whole core transport solver has been adapted to address several unique features of molten salt reactors. This paper discusses implementation of a depletion methodology which simulates the mixing of fuel throughout the core, the continuous removal of fission products, and the continuous addition of new fuel into the system. It also presents the methodology used to treat the transport of delayed neutron precursors. These new methods are demonstrated using models based on Transatomic Power Corporation’s molten salt reactor design.

Collins, Benjamin↗

Modeling Thermal and Stress Behavior of the Fuel-clad Interface in Monolithic Fuel Mini-plates

As part of the Global Threat Reduction Initiative, a fuel development and qualification program is in process with the objective of qualifying very high density low enriched uranium fuel that will enable the conversion of high performance research reactors with operational requirements beyond those supported with currently available low enriched uranium fuels. The high density of the fuel is achieved by replacing the fuel meat with a single monolithic low enriched uranium-molybdenum fuel foil. Doing so creates differences in the mechanical and structural characteristics of the fuel plate because of the planar interface created by the fuel foil and cladding. Furthermore, the monolithic fuel meat will dominate the structural properties of the fuel plate rather than the aluminum matrix, which is characteristic of dispersion fuel types. Understanding the integrity and behavior of the fuel-clad interface during irradiation is of great importance for qualification of the new fuel, but can be somewhat challenging to determine with a single technique. Efforts aimed at addressing this problem are underway within the fuel development and qualification program, comprised of modeling, as-fabricated plate characterization, and post-irradiation examination. An initial finite element analysis model has been developed to investigate worst-case scenarios for the basic monolithic fuel plate structure, using typical mini-plate irradiation conditions in the Advanced Test Reactor. Initial analysis shows that the stress normal to the fuel-clad interface dominates during irradiation, and that the presence of small, rounded delaminations at the interface is not of great concern. However, larger and/or fuel-clad delaminations with sharp corners can create areas of concern, as maximum principal cladding stress, strain, displacement, and peak fuel temperature are all significantly increased. Furthermore, stresses resulting from temperature gradients that cause the plate to bow or buckle in an unconstrained fuel plate configuration is greatly enhanced in a constrained fuel plate configuration. The sensitivities of the model and input parameters are discussed, along with some overlap of initial experimental observations using as-fabricated plate characterization and post-irradiation examination.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

ATF Benchmark Problems

The events at Fukushima Daiichi Nuclear Power Plant on March 2011 propelled the research and development of accident-tolerant fuel (ATF) for use in nuclear power plants. After these events, the United States Senate Appropriations Committee requested a report from the United States Department of Energy (DOE) regarding DOE’s plan for developing ATF. In DOE’s development plan, a 10-year effort beginning in 2012 was outlined from Phase 1 feasibility studies through Phase 3 commercialization with a lead test assembly (LTA) or a lead fuel rod (LFR) to be ready for insertion into a reactor by 2022. In fiscal year 2018, the US Nuclear Regulatory Commission (NRC) expressed an interest in using the DOE Office of Nuclear Energy (NE) advanced modeling and simulation (M&S) tools to evaluate advanced fuel concepts such as ATF. This interest evolved into a formal cooperation between DOE and NRC to ensure that an effective M&S capability is available for NRC analyses of ATF concepts. Over the last 10 years, the DOE-funded Energy Innovation Hub, also known as the Consortium for Advanced Simulation of Light Water Reactors (CASL), has developed, applied and deployed advanced M&S capabilities to enhance the operational performance, efficiency, and safety of light water reactors (LWRs). Due to the aging US nuclear fleet, CASL was initiated to improve the efficiency of nuclear power production, lower costs by enhancing the understanding of fuel performance and residence time in the nuclear reactor, enhance safety by studying new fuels that can endure severe conditions, and extend the life of existing reactors by predicting the lifetimes of key structural components

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Commercialization of a Direct Methanol Fuel Cell System

This paper describes a major breakthrough in energy technology developed at the Jet Propulsion Laboratory that can be used in a wide variety of portable, remote, and transportation applications without polluting the environment. The status, performance, and design considerations of the JPL non-polluting, direct methanol, fuel cell system for consumer equipment and transportation applications are reported herein. This new fuel cell technology utilizes the direct oxidation of a 3 percent aqueous liquid methanol solution as the fuel and air (O&sub2;) as the oxidant. The only products are CO&sub2; and water. Therefore, because recharging can be accomplished by refueling with methanol, vehicles can enjoy unlimited range and extended use compared to battery operated devices requiring recharging time and power accessibility.

fuel↗

Modeling the Transient Reactor Test Loop in TRACE for PWR Critical Heat Flux Benchmarking

Understanding transient critical heat flux (CHF) resulting from a Reactivity Insertion Accident (RIA) in nuclear systems is an extremely undeveloped field. Though many experiments have been done for CHF, remarkably few have been done for rods at PWR operating temperature and pressure (300 deg. C, 2200 psia) with a short time constant ramp in power. This leads to many concerns regarding understanding how RIA scenarios develop and evolve in commercial nuclear reactors. With a limited understanding of the phenomenology governing transient CHF, there is little hope in being able to accurately model these scenarios using today's thermal hydraulic codes. The Accident Tolerant Fuels (ATF) Program established by the Department of Energy (DOE) is seeking out new fuel and cladding systems that can be used to reduce the probability and consequences of severe accidents. To better understand this phenomenon, the DOE is restarting the Transient Reactor Test (TREAT) Facility at the Idaho National Laboratory (INL). TREAT will be able to provide representative neutronic boundary conditions for testing coupled thermal hydraulics on the Transient Water Environment Recirculating Loop (TWERL) to study transient CHF with the best representation possible. To support this task, Oregon State University (OSU) is designing and building a representative flow loop that will be able to mimic the conditions of TWERL (sans the neutronic boundary conditions) to create a benchmark study for existing lumped parameter thermal-hydraulic codes such as RELAP5 and TRACE. This flow loop, the Transient Reactor Test Facility (TRTL), will support the ATF program by providing much needed NQA-1 data for transient CHF at operating temperature and pressure.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗