Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Minnesota”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Selection of USSR foreign similarity regions

The similarity regions in the United States and Canada were selected to parallel the conditions that affect labeling and classification accuracies in the U.S.S.R. indicator regions. In addition to climate, a significant condition that affects labeling and classification accuracies in the U.S.S.R. is the proportion of barley and wheat grown in a given region (based on sown areas). The following regions in the United States and Canada were determined to be similar to the U.S.S.R. indicator regions: (1) Montana agrophysical unit (APU) 104 corresponds to the Belorussia high barley region; (2) North Dakota and Minnesota APU 20 and secondary region southern Manitoba and Saskatchewan correspond to the Ural RSFSR barley and spring wheat region; (3) Montana APU 23 corresponds to he North Caucasus barley and winter wheat region. Selection criteria included climates, crop type, crop distribution, growth cycles, field sizes, and field shapes.

Disler, J. M.↗

Monitoring land conversions from forest/wetland to agriculture

The utility of LANDSAT data in monitoring largescale land clearance and drainage activities in a forest/wetland environment in northern Minnesota was investigated. LANDSAT tapes from 1973, 1978 and 1980 were used in a multitemporal unsupervised land cover classification of the 9 x 15 mile site. Results show quite clearly and in a cost-effective manner, where the greatest activity occurred. It was also possible to integrate the LANDSAT data with other data available through the Land Management Information Center's geographic information system.

Dudding, M. L.↗

Integration of environmental and spectral data for sunflower stress determination

Stress in sunflowers was assessed in western and northwestern Minnesota. Weekly ground observations (acquired in 1980 and 1981) were analyzed in concert with large scale aerial photography and concurrent LANDSAT data. Using multidate supervised and unsupervised classification procedures, it was found that all crops grown in association with sunflowers in the study area are spectrally separable from one another. Under conditions of extreme drought, severely stressed plants were differentiable from those not severely stressed, but between-crop separation was not possible. Initial regression analyses to estimate sunflower seed yield showed a sensitivity to environmental stress during the flowering and seed development stages. One of the most important biological factors related to sunflower production in the Red River Valley area was found to be the extent and severity of insect infestations.

Lillesand, T.↗

Fundamental research data base

A fundamental research data base was created on a single 9-track 1600 BPI tape containing ground truth, image, and Badhwar profile feature data for 17 North Dakota, South Dakota, and Minnesota agricultural sites. Each site is 5x6 nm in area. Image data has been provided for a minimum of four acquisition dates for each site. All four images have been registered to one another. A list of the order of the files on tape and the dates of acquisition is provided.

Source record↗

Fundamental research data base

A fundamental research data base containing ground truth, image, and Badhwar profile feature data for 17 North Dakota, South Dakota, and Minnesota agricultural sites is described. Image data was provided for a minimum of four acquisition dates for each site and all four images were registered to one another.

Source record↗

The function and response of an improved stratospheric condensation nucleus counter

An improved condensation nucleus counter (CNC) for use in the stratosphere is described. The University of Minnesota CNC (UMCNC) has a sequential saturator and condenser and uses n-butyl alcohol as the working fluid. The use of a coaxial saturator flow, with aerosol in the center and filtered, alcohol-laden air around it, speeds the response of this instrument and improves its stability as pressure changes. The counting efficiency has been studied as a function of particle size and pressure. The UMCNC provides an accurate measure of submicron aerosol concentration as long as the number distribution is not dominated by sub-0.02 micron diameter aerosol. The response of the UMCNC is compared with that of other stratospheric condensation nucleus counters, and the results of a (near) comparison with a balloon-borne condensation nucleus counter are presented. The UMCNC has operated 14 times on a NASA U-2 aircraft at altitudes from 8 to 21.5 km.

Wilson, J. C.↗

Steady viscous flow past a circular cylinder

Viscous flow past a circular cylinder becomes unstable around Reynolds number Re = 40. With a numerical technique based on Newton's method and made possible by the use of a supercomputer, steady (but unstable) solutions have been calculated up to Re = 400. It is found that the wake continues to grow in length approximately linearly with Re. However, in conflict with available asymptotic predictions, the width starts to increase very rapidly around Re = 300. All numerical calculations have been performed on the CDC CYBER 205 at the CDC Service Center in Arden Hills, Minnesota.

Fornberg, B.↗

Data compression techniques for astronomy

The photometric and astrometric accuracy of the Minnesota automated dual-plate scanner is summarized. The relation between magnitude and isophotometric image diameter is linear on Schmidt plates over a large useful range. Results of a study of centroid measurement accuracy and image classification ability of parameters derived from both densitometric and isophotometric scanning techniques are presented. The data analyzed for this purpose are synthesized ideal star and galaxy brightness distributions with appropriate random noise added to simulate plate grain and sky background effects. A preliminary study of image classification using real plates and single isophote data finds that a parameter describing the raggedness of the isophote may be useful in distinguising stars from galaxies.

Landau, R.↗

Techniques of isophotometry

The expected performance of the Minnesota automated dual-plate scanner (APS) is discussed with regard to photometry, position measurement accuracy, and ability to classify images. In addition, a fast algorithm for calculating image parameters is described.

Ghigo, F. D.↗

Habitability of the Earth

Test methods to measure land vegetation biomass, net biological production and leaf area index by remote sensing are applied to estimate the biomass and net biological productivity of selected biomes, including the boreal forests and north temperate grasslands. Field verification is conducted in conjunction with remote sensing of pertinent variables and the development of a data base of relevant material initiated. Measurements are made in the Superior National Forest, Minnesota with the following remote sensing instruments: (1) an airborne 8 band Barnes radiometer; (2) the thematic mapper simulator flown in a NASA C-130 aircraft; (3) MSS data from LANDSAT 3; and (4) AVHRR data from the NOAA Satellite. Vegetation data collected as field verification in the Superior National Forest is summarized.

Botkin, D. B.↗

Spectral characterization of biophysical characteristics in a boreal forest: Relationship between Thematic Mapper band reflectance and leaf area index for Aspen

Results from analysis of a data set of simultaneous measurements of Thematic Mapper band reflectance and leaf area index are presented. The measurements were made over pure stands of Aspen in the Superior National Forest of northern Minnesota. The analysis indicates that the reflectance may be sensitive to the leaf area index of the Aspen early in the season. The sensitivity disappears as the season progresses. Based on the results of model calculations, an explanation for the observed relationship is developed. The model calculations indicate that the sensitivity of the reflectance to the Aspen overstory depends on the amount of understory present.

Badhwar, G.↗

Comparison of full-scale engine and subscale model performance of a mixed flow exhaust system for an energy efficient engine (E3) propulsion system

A full scale engine test of the NASA/General Electric Company (GE) Energy Efficient Engine (E3) was conducted to demonstrate the E3 engine concept and evaluate its performance. The test program, performed at the GE outdoor engine test facilities in Peebles, OH, included a detailed evaluation of the total pressure and temperature profiles at the exit of the mixed flow exhaust system to determine its mixing effectiveness. Subscale model tests of the same mixed flow exhaust system had been previously conducted at FluiDyne Engineering Corporation in Minneapolis, Minnesota as part of the GE E3 mixer aerodynamic technology development program. The scale model and full scale engine nozzle exit survey data and the calculated mixing effectiveness are compared and discussed. Results indicate the full scale engine mixing effectiveness to be five percent higher than the scale model as a result of a geometric difference and higher turbulence levels in the engne exhaust flowfield.

Kuchar, A. P.↗

Steady state stresses in ribbon parachute canopies

An experimental study of the steady state stresses in model ribbon parachute canopies is presented. The distribution of circumferential stress was measured in the horizontal ribbons of two parachutes using Omega sensors. Canopy pressure distributions and overall drag were also measured. Testing was conducted in the University of Minnesota Low-Speed Wind Tunnel at dynamic pressures ranging from 1.0 to 1.5 inches of water. The stresses in the parachute canopies were calculated using the parachute structural analysis code, CANO. It was found that the general shape of the measured and calculated stress distributions was fairly similar; however, the measured stresses were somewhat less than the calculated stresses.

Garrard, W. L.↗

Construction of the Soudan 2 detector

Progress in the construction of the Soudan 2 nucleon decay detector which is being built at the Soudan iron mine in Minnesota is discussed. The expected event rate and characteristics of low energy neutrino events, muon events, multiple muon events, and other cosmic ray phenomena are discussed.

Ayres, D. S.↗

Implications of complete watershed soil moisture measurements to hydrologic modeling

A series of six microwave data collection flights for measuring soil moisture were made over a small 7.8 square kilometer watershed in southwestern Minnesota. These flights were made to provide 100 percent coverage of the basin at a 400 m resolution. In addition, three flight lines were flown at preselected areas to provide a sample of data at a higher resolution of 60 m. The low level flights provide considerably more information on soil moisture variability. The results are discussed in terms of reproducibility, spatial variability and temporal variability, and their implications for hydrologic modeling.

Engman, E. T.↗

Analysis of 12-700 micron reflectance spectra of three optical black samples

Normal incidence, specular reflectance spectra of three samples of optical black coatings have been measured in 10 filter passbands at effective wavelengths between 12 and 700 microns. Strong absorption, due to amorphous silicate material in the coatings, is found in the 15-50 micron region of each spectrum. Reflecting-layer model calculations are fitted by a nonlinear least-squares routine to the spectra at wavelengths beyond the absorption band to determine far-infrared optical parameters. It is found that, with a similar wavelength dependence, the absorption coefficient of a new black coating (ECP 2200) made by the Minnesota Mining and Manufacturing Company (3M) is less than 1/10 that of the discontinued coating, 3M Black Velvet Nextel. It is also shown that the extinction effect of a very rough substrate is negligible compared with the effects of increased upper surface roughness and coating thickness attendant upon fully covering a very rough substrate.

Smith, S. M.↗

Analysis of atomic thermospheric nitrogen density

A NASA grant provided support for a research project at Augsbury College, Minneapolis, Minnesota for the analysis of atomic nitrogen density data obtained by the Neutral Atmospheric Composition Spectrometer (NACS) on board the Dynamics Explorer-2 satellite. Initial funding was for an exploratory study of the feasibility of obtaining ambient densities of N from source densities of NO. Funding was continued under the Dynamics Explorer Guest Investigator Program when initial studies indicated probable success in obtaining such ambient densities. The major scientific focus of the later work was to be to characterize the behavior of N densities at high latitudes.

Engebretson, M. J.↗

Peat landforms along the Albany River, northern Ontario. An ecological study of peat landforms in Canada and Alaska

During the summer of 1985 a field investigation was started in the Hudson Bay lowland region of northern Ontario, which represents the largest expanse of peatland in North America and is an important sink in the global carbon cycle. A key area in the lowlands is situated along the Albany River near the confluence of the Chepay River. Here the striking vegetation-landforms are transitional between those found on the bed of Glacial Lake Agassiz in northern Minnesota and southern Manitoba and the more northern peatlands in the Hudson Bay lowland region. In peatland studies elsewhere the landform patterns have been used not only to classify different peatland types but also as an indicator of potential developmetnal trends. The study area is generally defined by that covered by the TM scene E-40062-15532 taken on Sept. 16, 1982. The purpose of the field work is to acquire sufficent information to interpret the TM imagery and test various hypotheses on peatland development on the gasis of the pattern transitions.

Glaser, P. H.↗