Insignificance of lattice misfit for epitaxy
Au, Ag and Al films evaporation in ultrahigh vacuum on LiF and MgO surfaces, showing insignificant role of lattice misfit for epitaxy
Bauer, E.↗
SEARCH · Engineering Papers
Results for “MgO”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Investigation of integrating sphere measurement parameters
Directional and bidirectional reflectance of MgO sphere wall coatings, and directional characteristics of photomultiplier tube
Brown, G. L.↗
Specimen geometry effects and deformation characteristics in ionic crystals
LiF and MgO high purity single crystals plastic deformation geometric characteristics, discussing nucleation probability on different slip planes
Fotedar, H. L.↗
Study of sulfospinels
Several new compounds with the formula AB2S4 were synthesized. Pressure-induced polymorphism of the sulfospinels was investigated. Sulfospinels which produced new high-pressure phases were NiRh2S4, FeYb2S4, In2S3, CrIn2S4, NiIn2S4, CoIn2S4 and MnIn2S4. The only sulfospinels which transformed to the NiAs derivatives were those in which A and B atoms had unfilled d-orbitals. P-T phase relations were investigated for a series of sulfochromites. Thin films of several ACr2S4 sulfospinels were prepared by a flash evaporization technique on the (111) and (100) planes of NaCl and on the (100) plane of Mgo.
Tressler, R. E.↗
Thermodynamic models in cosmochemical systems.
Generalized computer methods are developed for inferring details of the formation of cosmochemical systems. Compositions of ideal gas mixtures existing in equilibrium with multicomponent solid and liquid phases are calculated. A comparison of computed results with experimental data is made for the ternary system MgO-FeO-SiO2. While the ideal-solution approximation is shown to be inaccurate in dealing with the silicate melts, the stable phases and compositions can be accurately calculated in a system where there are only solids and gas. A model system containing the elements H, O, Si, Mg, S, C, Cl, and F is investigated over a range of compositions involving the gas and ten solid phases, to show the power of the technique in dealing with complex gas-solid equilibria. Systems close to cosmic composition are next considered, both with and without iron.
Griffiths, P. R.↗
Deformation, recrystallization, strength, and fracture of press-forged ceramic crystals.
Sapphire and ruby were very difficult to press-forge because they deformed without cracking only in a limited temperature range before they melted. Spinel crystals were somewhat easier and MgO, CaO, and TiC crystals much easier to forge. The degree of recrystallization that occurred during forging (which was related to the ease and type of slip intersections) varied from essentially zero in Al2O3 to complete (i.e., random polycrystalline bodies were produced) in CaO. Forging of bi- and polycrystalline bodies produced incoherent bodies as a result of grain-boundary sliding. Strengths of the forged crystals were comparable to those of dense polycrystalline bodies of similar grain size. However, forged and recrystallized CaO crystals were ductile at lower temperatures than dense hot-pressed CaO. This behavior is attributed to reduced grain-boundary impurities and porosity. Fracture origins could be located, indicating that fracture in the CaO occurs internally as a result of surface work hardening caused by machining.-
Rice, R. W.↗
An experimental facility for the visual study of turbulent flows.
An experimental technique which allows visual observations of the wall area in turbulent pipe flow is described in detail. It requires neither the introduction of any injection or measuring device into the flow nor the presence of a two-phase flow or of a non-Newtonian fluid. The technique involves suspending solid MgO particles of colloidal size in trichloroethylene and photographing their motions near the wall with a high speed movie camera moving with the flow. Trichloroethylene was chosen in order to eliminate the index of refraction problem in a curved wall. Evaluation of the technique including a discussion of limitations is included. Also the technique is compared with previous methods of visual observations of turbulent flow.
Brodkey, R. S.↗
Mineralogy, petrology and chemistry of lunar rock 12039.
Rock 12039 belongs to the olivine-depleted group of magmatic rocks characterized by normative and modal SiO2, absence or very low abundance of olivine, and high FeO/(FeO + MgO), Ti/Cr, and CaO/MgO ratios. Clinopyroxenes in this rock show a complex, essentially continuous, compositional zonation from augite cores through ferroaugite to ferrohedenbergite with an abrupt discontinuity at the pyroxferroite contact and, thus, are different from pyroxene in most other Apollo 12 rocks. Two grains contain thin subcalcic pigeonite zones. Texture, presence of very fine (less than 1 micron) exsolution lamallae, and pyroxene zoning indicate a relatively rapid cooling history and pronounced in situ chemical fractionation.
Bunch, T. E.↗
Effects of additives on volume change on melting, surface tension, and viscosity of liquid aluminum oxide
The effects of various oxide additives on the volume change on melting, the surface tension, and the viscosity of liquid Al2O3 were studied. Additives of Sm2O3, MgO, and Y2O3 which form solid solutions, compounds, and multiphase solids with Al2O3 were studied. A review of the property data for Al2O3 and Al2O3 containing oxide additives is presented. Oxide additives to Al2O3 reduce the volume change on melting and with the exception of SiO2 lower the viscosity; surface tensions change with oxide additives, but changes vary with different container material. Viscosity and volume change on melting appeared to be significantly more important for studying the properties of liquid oxides than surface tension. Supercooling of 270 K of yttrium aluminum garnet was observed.
Bates, J. L.↗
Deformation processes in forging ceramics
The deformation processes involved in the forging of refractory ceramic oxides were investigated. A combination of mechanical testing and forging was utilized to investigate both the flow and fracture processes involved. Deformation studies of very fine grain Al203 revealed an apparent transition in behavior, characterized by a shift in the strain rate sensitivity from 0.5 at low stresses to near unity at higher stresses. The behavior is indicative of a shift in control between two dependent mechanisms, one of which is indicated to be cation limited diffusional creep with significant boundary enhancement. The possible contributions of slip, indicated by crystallographic texture, interface control of the diffusional creep and inhomogeneous boundary sliding are also discussed. Additional experiments indicated an independence of deformation behavior on MgO doping and retained hot pressing impurities, at least for ultrafine grained material, and also an independence of test atmosphere.
Cannon, R. M.↗
Study of CO2 sorbents for extravehicular activity
Portable life support equipment was studied for meeting the requirements of extravehicular activities. Previous studies indicate that the most promising method for performing the CO2 removal function removal function were metallic oxides and/or metallic hydroxides. Mgo, Ag2, and Zno metallic oxides and Mg(OH)2 and Zn(OH)2 metallic hydroxides were studied, by measuring sorption and regeneration properties of each material. The hydroxides of Mg and Zn were not regenerable and the zinc oxide compounds showed no stable form. A silver oxide formulation was developed which rapidly absorbs approximately 95% of its 0.19 Kg CO2 Kg oxide and has shown no sorption or structural degeneration through 22 regenerations. It is recommended that the basic formula be further developed and tested in large-scale beds under simulated conditions.
Colombo, G. V.↗
Compositional data for twenty-one Fra Mauro lunar materials.
Major, minor, and trace element analyses are presented for two igneous rocks, six breccias, four microbreccias, two breccia clasts, and six soils, as well as a sample of sawdust from rock 14066. Evaluation of the data suggests that the samples from the Fra Mauro highlands have the same nonterrestrial characteristics shown previously by the samples returned from the mare regions by Apollo 11 and 12 - namely, a high refractory element content, a lower volatile element content, and an excess reducing capacity above that due to FeO. The Fra Mauro soils have higher concentrations of Al2O3, Na2O, and K2O and lower amounts of FeO and TiO2 than do the mare soils. They also show a bimodal distribution of Ni, B, and Nb. The highland breccias are richer in SiO2, Al2O3, MgO, Na2O, and K2O than those returned from the mare lowlands. FeO, TiO2, and MnO are lower in concentration at Fra Mauro, and the highland breccias are more complex mineralogically than those collected previously.
Rose, H. J., Jr.↗
Niobian rutile in an Apollo 14 KREEP fragment.
Niobian rutile was found in a KREEP lithic fragment of basaltic texture. The niobian rutile contains 85.3% TiO2, 7.1% Nb2O5, 2.65% Cr2O3, 0.70% ZrO2, 0.61% SiO2, 0.82% Al2O3 0.61% FeO, 0.52% CaO, 0.22% V2O3 in addition to minor amounts of MnO, MgO, and CeO2. Rare-earth elements were not detected, in contrast with lunar niobian rutile of Marvin (1971). Coexisting minerals in the KREEP fragment are major amounts of plagioclase and orthopyroxene, and minor amounts of olivine, ilmenite, augite, barian K-feldspar, whitlockite, troilite, Ni-Fe, zirkelite, and chromite.
Hlava, P. F.↗
The Oro Grande, New Mexico, chondrite and its lithic inclusion.
The Oro Grande, New Mexico, U.S.A., chondrite was found in 1971. Electron microprobe analyses and microscopic examination show the following mineralogy: olivine (Fa 19.3 mole %), orthopyroxene (Fs 16.2 mole %), diopside, feldspar (An 13.6 mole %), chlorapatite, whitlockite, kamacite, taenite, troilite, chromite, and an iron-bearing terrestrial weathering product. A bulk chemical analysis of the meteorite shows the following results (weight %): Fe 0.84, Ni 1.46, Co 0.07, FeS 3.62, SiO2 34.18, TiO2 0.14, Al2O3 1.83, Cr2O3 0.55, Fe2O3 21.25, FeO 9.13, MnO 0.31, MgO 21.52, CaO 1.72, Na2O 0.70, K2O 0.08, P2O5 0.25, H2O(+) 2.14, H2O(-) 0.40, C 0.22, sum 100.41. On the basis of composition and texture the Oro Grande meteorite is classified as an H5 chondrite.
Fodor, R. V.↗
Major and trace elements in igneous rocks from Apollo 15.
The concentrations of major and trace elements have been determined in igneous rocks from Apollo 15. All materials analyzed have typical depletions of Eu except for minerals separated from sample 15085. Four samples have concentrations of trace elements that are similar to those of KREEP. The samples of mare basalt from Apollo 15 have higher concentrations of FeO, MgO, Mn, and Cr and lower concentrations of CaO, Na2O, K2O, and rare-earth elements (REE) as compared to the samples of mare basalt from Apollos 11, 12, and 14. The samples can be divided into two groups on the basis of their normative compositions. One group is quartz normative and has low concentrations of FeO while the other is olivine normative and has high concentrations of FeO. The trace element data indicate that the samples of olivine normative basalt could be from different portions of a single lava flow.
Helmke, P. A.↗
High temperature compounds for turbine vanes
Fabrication and microstructure control studies were conducted on SiC, Si3N and composites based on Si3N. Charpy mode impact testing to 2400 F established that Si3N4/Mo composites have excellent potential. Attempts to fabricate composites of Si3N4 with superalloys, both by hot pressing and infiltration were largely unsuccessful in comparison to using Mo, Re, and Ta which are less reactive. Modest improvements in impact strength were realized for monolithic Si3N4; however, SiC strengths increased by a factor of six and now equal values achieved for Si3N4. Correlations of impact strength with material properties are discussed. Reduced MgO densification aid additions to Si3N4 were found to decrease densification kinetics, increase final porosity, decrease room temperature bend strength, increase high temperature bend strength, and decrease bend stress rupture properties. The decrease in bend strength at high temperature for fine grain size SiC suggested that a slightly larger grain size material with a nearly constant strength-temperature relation may prove desirable in the creep and stress rupture mode.
Rhodes, W. H.↗
Glass-to-metal seals comprising relatively high expansion metals
A glass suitable for glass-to-metal seals that has a resistance to attack by moisture and a high coefficient of linear thermal expansion is introduced. Linear expansion covers the range from 12 to 14 x 10 to the minus 6 C between room temperature and 500 C. The glass is essentially composed of, by molar percent, about 9% of K2O, about 10% of Na2O, about 70% of SiO2, about 6% Al2O3, and about 5% of MgO.
Hirayama, C.↗
LOX/GOX sensitivity of fluoroelastomers
The effect of formulation components and the addition of fire retardants on the impact sensitivity of Viton B fluoroelastomer in liquid oxygen was studied with the objective of developing a procedure for reliably reducing this sensitivity. Component evaluation, carried out on more than 40 combinations of components and cure cycles, showed that almost all the standard formulation agents, including carbon, MgO, Diak-3, and PbO2, will sensitize the Viton stock either singly or in combinations, some combinations being much more sensitive than others. Cure and postcure treatments usually reduced the sensitivity of a given formulation, often dramatically, but no formulated Viton was as insensitive as the pure Viton B stock. Coating formulated Viton with a thin layer of pure Viton gave some indication of reduced sensitivity, but additional tests are needed. It is concluded that sensitivity in formulated Viton arises from a variety of sources, some physical and some chemical in origin. Elemental analyses for all the formulated Vitons are reported as are the results of a literature search on the subject of LOX impact sensitivity.
Kirshen, N.↗