Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetization switching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Effect of atom substitutions on the magnetic properties in Ce 2 Fe 17 : Toward permanent magnet applications

Due to the rapidly developing technologies and huge market demand, there has been increasing interest internationally in exploring permanent magnet formulations in addition to the well-known Nd 2 Fe 14 B and SmCo 5 /Sm 2 Co 17 . Given Fe's low materials cost and generally high magnetization, Fe-rich rare earth binaries such as Ce 2 Fe 17 comprise a rich “hunting ground” for such new materials. While this compound suffers from a low ordering point and is a heli magnet, these difficulties are easily remedied by the substitution of appropriate amounts of cobalt for Fe, with room-temperature saturation magnetization as high as 1.5 T. In this work, we try to switch the all-important magnetic anisotropy from planar to uniaxial behavior in Ce 2 Fe 17 via 18 h - and 6 c -type atom substitutions with Si, Ir, and numerous other atoms. The uniaxial magnetocrystalline anisotropy is successfully achieved in the 6 c -site-substituted Ce 2 Fe 15 Ir 2 systems, along with large magnetization. We find that iridium substitution, in particular, induces a substantial uniaxial anisotropy of 11.25 MJ/m 3 , which is comparable to most of the current rare earth permanent magnets. Although the iridium substitution is costly, the finding of Ir-triggered uniaxial magnetic anisotropy indicates the potential of Ce–Fe-based alloys for permanent magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Out-of-plane polarization and topological magnetic vortices in multiferroic CrPSe 3

Two-dimensional multiferroic materials are ideal systems for exploring new coupling mechanisms between different ferroic orders and producing novel quantum phenomena with potential applications. Here we employ first-principles density functional theory calculations to discover intrinsic ferroelectric and antiferroelectric phases of Cr⁢P⁢Se 3 , which show ferromagnetic order and compete with the centrosymmetric phase with an antiferromagnetic order. Our analysis shows that the electrical dipoles of such type-I multiferroic phases come from the out-of-plane displacements of phosphorus ions due to the stereochemically active lone pairs. The coupling between polar and magnetic orders creates the opportunity for tuning the magnetic ground state by switching from the centrosymmetric to the ferroelectric phase using an out-of-plane electric field. In ferroelectric and antiferroelectric phases, the combination of easy-plane anisotropy and Dzyaloshinskii-Moriya interactions indicates that they can host topological magnetic vortices such as meron pairs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tunable Anomalous Hall Effect in a Kagomé Ferromagnetic Weyl Semimetal

Emerging from the intricate interplay of topology and magnetism, the giant anomalous Hall effect (AHE) is the most known topological property of the recently discovered kagomé ferromagnetic Weyl semimetal Co 3 Sn 2 S 2 with the magnetic Co atoms arranged on a kagomé lattice. Here it is reported that the AHE in Co 3 Sn 2 S 2 can be fine-tuned by an applied magnetic field orientated within ≈2° of the kagomé plane, while beyond this regime, it stays unchanged. Particularly, it can vanish in magnetic fields parallel to the kagomé plane and even decrease in magnetic fields collinear with the spin direction. This tunable AHE can be attributed to local spin switching enabled by the geometrical frustration of the magnetic kagomé lattice, revealing that spins in a kagomé ferromagnet change their switching behavior as the magnetic field approaches the kagomé plane. Furthermore, these results also suggest a versatile way to tune the properties of a kagomé magnet.

anomalous Hall effect↗
DOE OSTI2020

Antiferromagnetic domain switching modulated by an ultrathin Co interlayer in the Fe/Co/CoO/MgO(001) system

Using a combination of hysteresis loop, Kerr microscope, and x-ray magnetic circular dichroism measurements, in this study we investigated the antiferromagnetic (AFM) domain switching process modulated by the sub-nm thick Co inserting layer in a single crystalline Fe/Co/CoO/MgO(001). The CoO AFM domain switching occurs at lower temperature for the thicker Co interlayer, and the activation energy barrier of CoO AFM domain switching decreases as the Co interlayer thickness increases. The exchange coupling strength between the AFM spins in CoO layer and the ferromagnetic spins in the Fe/Co bilayer is found to be independent of the Co layer thickness. Our results suggest an approach to modulate the dynamic properties of AFM domains with an interfacial modification.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Unconventional magnon-mediated spin torque enabled by ferroelectric domain engineering in multiferroic BiFeO 3

Spin current provides an energy-efficient approach for manipulating magnetization, when its spin polarization aligns with the magnetization direction. However, conventional spin-source materials possess high crystalline symmetry, restricting spin polarization to be orthogonal to both spin and charge current directions. Here, we overcome this limitation by utilizing the concept of magnon-mediated spin-orbit torque through integration of the insulating multiferroic BiFeO 3 with a conventional spin-source material. We observe that spin polarization generated by conventional spin-source material can excite unconventional magnon polarization due to the interplay between cycloidal antiferromagnetic order and the ferroelectric domain structure in BiFeO 3 . This produces an unconventional magnon torque that allows deterministic, field‑free switching of in‑plane magnetization collinear with the current direction, unattainable with conventional spin-source materials. Our results establish multiferroic-based heterostructure as a symmetry‑engineered magnon spin source, paving the way for low-power spintronic devices.

Liang, Yuhan [Tsinghua Univ., Beijing (China); Cor↗
DOE OSTI2025

Probing topological phases in a perturbed Kane-Mele model via RKKY interaction: Application to monolayer jacutingaite Pt 2 ⁢HgSe 3

Quantum spin Hall insulators (QSHIs) leverage strong spin-orbit coupling (SOC) for efficient spin manipulation, making them promising for spintronics. Here, in this study, we investigate the noncollinear Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction between two magnetic impurities in a perturbed Kane-Mele model with strong SOC, relevant to monolayer jacutingaite Pt 2 ⁢HgSe 3 as a prominent QSHI. Following the previous studies that mainly focused on the model and its general applications, we provide a systematic examination of the effects of various perturbations and strong spin-orbit hybridizations, which drive phase transitions that have not been extensively explored before. By incorporating these perturbations into the model and accurately accounting for spin-orbit hybridizations through spin-space Green's functions and the RKKY interactions, we uncover distinct, relative (rather than absolute) signatures of different phase transitions. These phase transitions are induced by both static and dynamic perturbations on the magnetic impurities. Notably, we identify additional phases emerging from the interplay with the magnetic substrate. All these influence the switching between ferromagnetic and antiferromagnetic, as well as clockwise and counterclockwise magnetic interactions. Our results provide a practical way to track topological phases through magnetic properties, offering new insights into phase control and spin manipulation in QSHIs.

Kane-Mele model↗
DOE OSTI2022

Non-linear MHD modelling of edge localized modes suppression by resonant magnetic perturbations in ITER

Edge localized modes (ELMs) suppression by resonant magnetic perturbations (RMPs) was studied with the non-linear magneto-hydro-dynamic (MHD) code JOREK for the ITER H-mode scenarios at 15 MA, 12.5 MA, 10 MA/5.3 T. In this study, the main aim was to demonstrate that ELMs can be suppressed by RMPs while the divertor 3D footprints of heat and particle fluxes remain within divertor material limits. The unstable peeling–ballooning modes responsible for ELMs without RMPs were modelled first for each scenario using numerically accessible parameters for ITER. Then the stabilization of ELMs by RMPs was modelled with the same parameters. RMP spectra, optimized by the linear MHD MARS-F code, with main toroidal harmonics N = 2, N = 3, N = 4 have been used as boundary conditions of the computational domain of JOREK, including realistic RMP coils, main plasma, scrape off layer (SOL) divertor and realistic first wall. The model includes all relevant plasma flows: toroidal rotation, two fluid diamagnetic effects and neoclassical poloidal friction. With RMPs, the main toroidal harmonic and the non-linearly coupled harmonics remain dominant at the plasma edge, producing saturated modes and a continuous MHD turbulent transport thereby avoiding ELM crashes in all scenarios considered here. The threshold for ELM suppression was found at a maximum RMP coils current of 45 kAt–60 kAt compared to the coils maximum capability of 90 kAt. In the high beta poloidal steady-state 10 MA/5.3 T scenario, a rotating QH-mode without ELMs was observed even without RMPs. In this scenario with RMPs N = 3, N = 4 at 20 kAt maximum current in RMP coils, similar QH-mode behaviour was observed however with dominant edge harmonic corresponding to the main toroidal number of RMPs. The present MHD modelling was limited in time by few tens of ms after RMPs were switched on until the magnetic energy of the modes saturates. As a consequence the thermal energy was still evolving on this time scale, far from the ITER confinement time scale and hence only the form of 3D footprints on the divertor targets can be indicated within this set-up. Also note, that the divertor physics was missing in this model, so realistic values of fluxes are out of reach in this modelling. However the stationary 3D divertor and particle fluxes could be simply extrapolated from these results to the stationary situation considering that a large power fraction should be radiated in the core and SOL and only about 50 MW power is going to the divertor, which is an arbitrary, but reasonable number used here. The 3D footprints with RMPs show the characteristic splitting with the main RMP toroidal symmetry. The maximum radial extension of the footprints typically was ~20 cm in inner divertor and ~40 cm in outer divertor with stationary heat fluxes decreasing further out from the initial strike point from ~5 MW m ₋2 to ~1 MW m ₋2 assuming a total power in the divertor and walls is 50 MW. The heat fluxes remain within the divertor target and baffle areas, however with rather small margin in the outer divertor which could be an issue for the first wall especially in transient regimes when part of the plasma thermal energy is released due to switching on the RMP coils. This fact should be considered when RMPs are applied with a more favorable application before or soon after the L–H transition, although optimization is required to avoid increasing the L–H power threshold with RMPs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Magnetic triggering — time-resolved characterisation of silicon strip modules in the presence of switching DC-DC converters

Modules for the ATLAS Inner Tracker (ITk) strip tracker include a DC-DC converter circuit glued directly to the silicon sensor which converts the 11 V supplied to the module to the 1.5 V required for the operation of the readout chips. The DC-DC converter unit, consisting of a copper solenoid and custom ASIC, is located directly above the silicon strip sensor and therefore needs to be shielded to protect the sensor from EMI noise created during the operation of the circuit. Despite dedicated shielding, consisting of an aluminium shield box with continuous solder seams encompassing the surface components and a copper layer in the PCB beneath it, module channels connected to sensor strips located beneath the converter circuit were found to show a noise increase. While the DC-DC converter unit causing the underlying EMI noise operates at a frequency of 2 MHz, module characterisation measurements for ITk strip tracker modules are typically performed asynchronously to the DC-DC switching and are therefore averaged over the full range of time bins with respect to the converter frequency. In order to investigate the time dependence of the noise injection relative to the DC-DC switching frequency, a dedicated setup to understand the time-resolved performance change in modules was developed. By using a magnetic field probe to measure the field leaking through the shield box and triggering on its rising edge, data taking could be synchronised with the DC-DC switching. This paper illustrates the concept and setup of such time-resolved performance measurements using magnetic triggering and presents results for the observed effects on signal and noise for ATLAS ITk strip modules from both laboratory and beam tests.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Configurable antiferromagnetic domains and lateral exchange bias in atomically thin CrPS 4

Interfacial exchange coupling between antiferromagnets (AFMs) and ferromagnets (FMs) crucially makes it possible to shift the FM hysteresis, known as exchange bias, and to switch AFM states. Two-dimensional magnets unlock opportunities to combine AFM and FM materials; however, the buried AFM–FM interfaces obtained by stacking remains challenging to understand. Here, in this work, we demonstrate interfacial control via intralayer exchange coupling in the layered AFM CrPS 4 , where connected even and odd layers realize pristine lateral interfaces between AFM-like and FM-like regions. We distinguish antiphase even-layer states by scanning nitrogen-vacancy centre magnetometry due to a weak surface magnetization. This surface magnetization enables control over the even-layer state, with different regions switching at distinct fields due to their own lateral couplings. We toggle three AFM domains adjacent to a FM-like region and demonstrate a tunable multilevel exchange bias. Our nanoscale visualization unveils the microscopic origins of exchange bias and advances single two-dimensional crystals for hybrid AFM–FM technologies.

magnetic devices↗
DOE OSTI2021

RKKY Exchange Bias Mediated Ultrafast All-Optical Switching of a Ferromagnet

The discovery of ultrafast helicity-independent all-optical switching (HI-AOS), as well as picosecond all-electrical switching of a ferrimagnet, has inspired the ultrafast spintronics community to explore ultrafast switching of a ferromagnet to achieve practical ultrafast storage and memory devices. Two explored mechanisms of HI-AOS of a ferromagnet in ferromagnet-ferrimagnet heterostructure are: a) exploiting the indirect exchange coupling with and b) injection of non-local spin current originated from a switching ferrimagnet. Here, in this manuscript, exchange mediated HI-AOS of a Ruderman–Kittel–Kasuya–Yosida (RKKY) exchange coupled “[Co/Pt]-multilayers/Pt spacer/CoGd” heterostructure is demonstrated. The authors have measured layer-resolved static magnetic properties, single-shot HI-AOS, and magnetization dynamics of the ferromagnetic Co/Pt multilayers (MLs), that are ferromagnetically or antiferromagnetically coupled with ferrimagnetic CoGd layers. Time-resolved magnetization dynamics reveal a 3.5 ps switching time of the Co/Pt MLs, which is the fastest switching of a ferromagnet reported to date. Employing an extended microscopic three-temperature model, the temporal dynamics of the exchange coupled ferromagnet–ferrimagnet heterostructure are simulated, qualitatively and quantitatively explaining the experimental switching phenomena. This work experimentally as well as theoretically establishes the mechanism of exchange mediated all-optical switching of ferromagnet-ferrimagnet heterostructures, which can be integrated with a magnetic tunnel junction for efficient reading after ultrafast energy-efficient switching.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tension-free Dirac strings and steered magnetic charges in 3D artificial spin ice

3D nano-architectures presents a new paradigm in modern condensed matter physics with numerous applications in photonics, biomedicine, and spintronics. They are promising for the realization of 3D magnetic nano-networks for ultra-fast and low-energy data storage. Frustration in these systems can lead to magnetic charges or magnetic monopoles, which can function as mobile, binary information carriers. However, Dirac strings in 2D artificial spin ices bind magnetic charges, while 3D dipolar counterparts require cryogenic temperatures for their stability. Here, we present a micromagnetic study of a highly frustrated 3D artificial spin ice harboring tension-free Dirac strings with unbound magnetic charges at room temperature. We use micromagnetic simulations to demonstrate that the mobility threshold for magnetic charges is by 2 eV lower than their unbinding energy. By applying global magnetic fields, we steer magnetic charges in a given direction omitting unintended switchings. The introduced system paves the way toward 3D magnetic networks for data transport and storage.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Spin switchable optical phenomena in Rashba band structures through intersystem crossing in momentum space in solution-processing 2D-superlattice perovskite film

Spin-switchable phenomena are a critical element for the development of spintronic and chiroptic devices. Herein we combine a 2D-superlattice perovskite (4,4-DFPD2PbI4) film with a ferromagnetic cobalt (Co) layer to form a multiferroic perovskite/Co interface, and demonstrate spin-switchable circularly polarized luminescence (CPL) between right-handed σ+ and left-handed σ− polarizations. When the ferromagnetic spins of Co at the Co/perovskite interface are altered between positive and negative magnetic field directions, the CPL from the 2D-superlattice perovskite switches from σ+ to σ− polarization. The magnetic field effects present a unique method to confirm that CPL is generated by the circular-orbital momentum of light-emitting excitons within Rashba band structures, eliminating artifacts involving structural birefringence. Our polarized neutron reflectometry measurements confirm a super long-range spin-orbit interaction occurring in the 2D-superlattice perovskite films. The temperature dependence of spin-switchable phenomenon indicates an extraordinarily long orbital polarization lifetime, reaching microseconds at room temperature and milliseconds at 5 K.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Domain wall-magnetic tunnel junction spin–orbit torque devices and circuits for in-memory computing

There are pressing problems with traditional computing, especially for accomplishing data-intensive and real-time tasks, that motivate the development of in-memory computing devices to both store information and perform computation. Magnetic tunnel junction memory elements can be used for computation by manipulating a domain wall, a transition region between magnetic domains, but the experimental study of such devices has been limited by high current densities and low tunnel magnetoresistance. Here, we study prototypes of three-terminal domain wall-magnetic tunnel junction in-memory computing devices that can address data processing bottlenecks and resolve these challenges by using perpendicular magnetic anisotropy, spin–orbit torque switching, and an optimized lithography process to produce average device tunnel magnetoresistance TMR = 171% and average resistance-area product RA = 29 Ω μm2, close to the RA of the unpatterned film. Device initialization variation in switching voltage is shown to be curtailed to 7%–10% by controlling the domain wall initial position, which we show corresponds to 90%–96% accuracy in a domain wall-magnetic tunnel junction full adder simulation. Repeatability of writing and resetting the device is shown. A circuit shows an inverter operation between two devices, showing that a voltage window is large enough, compared to the variation noise, to repeatably operate a domain wall-magnetic tunnel junction circuit. These results make strides in using magnetic tunnel junctions and domain walls for in-memory and neuromorphic computing applications.

Alamdar, Mahshid (ORCID:0000000221732935)↗
DOE OSTI2025

Observation of Topological Chirality Switching Induced Freezing of a Skyrmion Crystal

Magnetic skyrmions are topologically protected quasi-particles with a well-defined chirality. Control over their chirality is proposed as an additional feature for encoding data bits or as qubits in quantum computing due to their high efficiency and stability against achiral magnetic textures. Here it is shown that an in-plane magnetic field can be utilized to reshape the energy barriers between different skyrmionic bubbles (e.g., Bloch type, type-II) enabling spontaneous chirality fluctuations with a frequency that increases with the strength of the in-plane field. The insulating van der Waals ferromagnet CrBr3 is used as an archetypal system for low damping, reduced energy dissipation and a high number of magnetic phases to capture the chirality dynamics in real time through cryo-Lorentz transmission electron microscopy. It is observed that the interplay between the intrinsic Dzyaloshinskii–Moriya interaction and out-of-plane field biased the chirality dynamics, favoring one handedness over the other. A remarkable consequence of the spontaneous chirality switching mechanism is that it induces a freezing (or crystallization) process in the skyrmion lattice. As the bubbles fluctuate between Bloch and type-II they elongate and shrink parallel to the in-plane field. Subsequently, the overall lattice crystallizes along the in-plane field direction, inducing a phase transition from a disordered liquid state to a hexatic phase where skyrmions are highly ordered resembling that of a solid. The results indicate chirality as an active element in the creation of topologically protected skyrmion crystals unveiling pathways toward chiral spintronic device platforms with tunable embedded configuration.

2D Phase Transition↗
DOE OSTI2020

Crystal orientation dependence of interfacial magnetic anisotropy at heavy-metal/magnetic-garnet interfaces

Ferrimagnetic insulators capped with a heavy metal are becoming an increasingly interesting materials system in spintronics due to their unique ability for electrical manipulation and detection of magnetic states and spin textures via spin-orbit torques. The ability to engineer magnetic anisotropy is a powerful tool for tuning the recently discovered phenomena in these bilayers such as electrical switching or the stabilization of topological magnetic textures. Here, we observe large shifts in the magnetic anisotropy in Tm 3 Fe 5 O 13 and Y 3 Fe 5 O 12 thin films due to heavy-metal capping layers, which strongly depends on the orientation of the substrate and therefore the orientation of the epitaxial films. This work suggests large Rashba spin-orbit coupling at the metal/ferrimagneticinsulator interface, which can be engineered in spintronic devices that utilize spin-orbit torques for electrical control of the magnetization in magnetic insulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Intricate Magnetic Landscape in Antiferromagnetic Kagome Metal TbTi 3 Bi 4 and Interplay with Ln 2– x Ti 6+ x Bi 9 (Ln: Tb···Lu) Shurikagome Metals

Here we present the discovery and characterization of the kagome metal TbTi 3 Bi 4 in tandem with a new series of compounds, the Ln 2–x Ti 6+x Bi 9 (Ln: Tb–Lu) shurikagome metals. We previously reported on the growth of the LnTi 3 Bi 4 (Ln: La–Gd 3+ , Eu 2+ , Yb 2+ ) family, a chemically diverse and exfoliable series of kagome metals with complex and highly anisotropic magnetism. However, unlike the La–Gd analogs, TbTi 3 Bi 4 cannot be synthesized by our previous methodology due to phase competition with crystals of Ln 2–x Ti 6+x Bi 9 (x ~ 1.7–1.2). Here we discuss the phase competition between the LnTi 3 Bi 4 and Ln 2–x Ti 6+x Bi 9 families, helping to frame the difficulty in synthesizing LnTi 3 Bi 4 compounds with small Ln species and providing a strategy to circumvent the formation of Ln 2–x Ti 6+x Bi 9 . Detailed characterization of the magnetic and electronic transport properties on single crystals of TbTi 3 Bi 4 reveals a highly complex landscape of magnetic phases arising from an antiferromagnetic ground state. A series of metamagnetic transitions creates at least 5 unique magnetic phase pockets, including a 1/3 and 2/3 magnetization plateau. Further, the system exhibits an intimate connection between the magnetism and magnetotransport, exhibiting sharp switching from positive (+40%) to negative magnetoresistance (–50%). Like the LnTi 3 Bi 4 kagome metals, the Ln 2–x Ti 6+x Bi 9 family exhibits quasi-2D networks of titanium and chains of rare earth. Finally, we present the structures and some basic magnetic properties of the Ln 2–x Ti 6+x Bi 9 family alongside our characterization of the newly discovered TbTi 3 Bi 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗