Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “METAMORPHISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Reduction of Crosshatch Roughness and Threading Dislocation Density in Metamorphic GaInP Buffers and GaInAs Solar Cells

Surface crosshatch roughness typically develops during the growth of lattice-mismatched compositionally graded buffers and can limit misfit dislocation glide. In this study, the crosshatch roughness during growth of a compressive GaInP/GaAs graded buffer is reduced by increasing the phosphine partial pressure throughout the metamorphic growth. Changes in the average misfit dislocation length are qualitatively determined by characterizing the threading defect density and residual strain. The decrease of crosshatch roughness leads to an increase in the average misfit dislocation glide length, indicating that the surface roughness is limiting dislocation glide. Growth rate is also analyzed as a method to reduce surface crosshatch roughness and increase glide length, but has a more complicated relationship with glide kinetics. Using knowledge gained from these experiments, high quality inverted GaInAs 1 eV solar cells are grown on a GaInP compositionally graded buffer with reduced roughness and threading dislocation density. The open circuit voltage is only 0.38 V lower than the bandgap potential at a short circuit current density of 15 mA/cm{sup 2}, suggesting that there is very little loss due to the lattice mismatch.

14 SOLAR ENERGY↗

2 {mu}m laterally coupled distributed-feedback GaSb-based metamorphic laser grown on a GaAs substrate

We report a type-I GaSb-based laterally coupled distributed-feedback (DFB) laser grown on a GaAs substrate operating continuous wave at room temperature. The laser structure was designed to operate near a wavelength of 2 {mu}m and was grown metamorphically with solid-source molecular beam epitaxy. The device was fabricated using a 6th-order deep etch grating structure as part of the sidewalls of the narrow ridge waveguide. The DFB laser emits total output power of up to 40 mW in a single longitudinal mode operation at a heat-sink temperature of 20 Degree-Sign C.

36 MATERIALS SCIENCE↗

A self-reconfiguring metamorphic nanoinjector for injection into mouse zygotes

This paper presents a surface-micromachined microelectromechanical system nanoinjector designed to inject DNA into mouse zygotes which are ≈90 μm in diameter. The proposed injection method requires that an electrically charged, DNA coated lance be inserted into the mouse zygote. The nanoinjector's principal design requirements are (1) it must penetrate the lance into the mouse zygote without tearing the cell membranes and (2) maintain electrical connectivity between the lance and a stationary bond pad. These requirements are satisfied through a two-phase, self-reconfiguring metamorphic mechanism. In the first motion subphase a change-point six-bar mechanism elevates the lance to ≈45 μm above the substrate. In the second motion subphase, a compliant folded-beam suspension allows the lance to translate in-plane at a constant height as it penetrates the cell membranes. The viability of embryos following nanoinjection is presented as a metric for quantifying how well the nanoinjector mechanism fulfills its design requirements of penetrating the zygote without causing membrane damage. Viability studies of nearly 3000 nanoinjections resulted in 71.9% of nanoinjected zygotes progressing to the two-cell stage compared to 79.6% of untreated embryos.

60 APPLIED LIFE SCIENCES↗

Temperature dependence of ballistic mobility in a metamorphic InGaAs/InAlAs high electron mobility transistor

We have investigated the temperature dependence of ballistic mobility in a 100 nm-long InGaAs/InAlAs metamorphic high-electron-mobility transistor designed for millimeter-wavelength RF applications. To extract the temperature dependence of quasi-ballistic mobility, our experiment involves measurements of the effective mobility in the low-bias linear region of the transistor and of the collision-dominated Hall mobility using a gated Hall bar of the same epitaxial structure. The data measured from the experiment are consistent with that of modeled ballistic mobility based on ballistic transport theory. These results advance the understanding of ballistic transport in various transistors with a nano-scale channel length that is comparable to the carrier's mean free path in the channel.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth, strain relaxation properties and high-κ dielectric integration of mixed-anion GaAs{sub 1-y}Sb{sub y} metamorphic materials

Mixed-anion, GaAs{sub 1-y}Sb{sub y} metamorphic materials with a wide range of antimony (Sb) compositions extending from 15% to 62%, were grown by solid source molecular beam epitaxy (MBE) on GaAs substrates. The impact of different growth parameters on the Sb composition in GaAs{sub 1-y}Sb{sub y} materials was systemically investigated. The Sb composition was well-controlled by carefully optimizing the As/Ga ratio, the Sb/Ga ratio, and the substrate temperature during the MBE growth process. High-resolution x-ray diffraction demonstrated a quasi-complete strain relaxation within each composition of GaAs{sub 1-y}Sb{sub y}. Atomic force microscopy exhibited smooth surface morphologies across the wide range of Sb compositions in the GaAs{sub 1-y}Sb{sub y} structures. Selected high-κ dielectric materials, Al{sub 2}O{sub 3}, HfO{sub 2}, and Ta{sub 2}O{sub 5} were deposited using atomic layer deposition on the GaAs{sub 0.38}Sb{sub 0.62} material, and their respective band alignment properties were investigated by x-ray photoelectron spectroscopy (XPS). Detailed XPS analysis revealed a valence band offset of >2 eV for all three dielectric materials on GaAs{sub 0.38}Sb{sub 0.62}, indicating the potential of utilizing these dielectrics on GaAs{sub 0.38}Sb{sub 0.62} for p-type metal-oxide-semiconductor (MOS) applications. Moreover, both Al{sub 2}O{sub 3} and HfO{sub 2} showed a conduction band offset of >2 eV on GaAs{sub 0.38}Sb{sub 0.62}, suggesting these two dielectrics can also be used for n-type MOS applications. The well-controlled Sb composition in several GaAs{sub 1-y}Sb{sub y} material systems and the detailed band alignment analysis of multiple high-κ dielectric materials on a fixed Sb composition, GaAs{sub 0.38}Sb{sub 0.62}, provides a pathway to utilize GaAs{sub 1-y}Sb{sub y} materials in future microelectronic and optoelectronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gating of high-mobility InAs metamorphic heterostructures

We investigate the performance of gate-defined devices fabricated on high mobility InAs metamorphic heterostructures. We find that heterostructures capped with In{sub 0.75}Ga{sub 0.25}As often show signs of parallel conduction due to proximity of their surface Fermi level to the conduction band minimum. Here, we introduce a technique that can be used to estimate the density of this surface charge that involves cool-downs from room temperature under gate bias. We have been able to remove the parallel conduction under high positive bias, but achieving full depletion has proven difficult. We find that by using In{sub 0.75}Al{sub 0.25}As as the barrier without an In{sub 0.75}Ga{sub 0.25}As capping, a drastic reduction in parallel conduction can be achieved. Our studies show that this does not change the transport properties of the quantum well significantly. We achieved full depletion in InAlAs capped heterostructures with non-hysteretic gating response suitable for fabrication of gate-defined mesoscopic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

InP-based type-I quantum well lasers up to 2.9 μm at 230 K in pulsed mode on a metamorphic buffer

This work reports on up to 2.9 μm lasing at 230 K of InP-based type-I quantum well lasers. This record long wavelength lasing is achieved by applying InP-based Sb-free structures with eight periods of strain-compensated InAs quantum wells grown on metamorphic In{sub 0.8}Al{sub 0.2}As template layers. The continuous-wave threshold current density is 797 A/cm{sup 2} and the idealized extrapolated threshold current density for infinite cavity length is as low as 58 A/cm{sup 2} per quantum well at 120 K. This scheme is a promising pathway for extending the wavelength range of type-I quantum well lasers on InP substrates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Growth and characterization of (110) InAs quantum well metamorphic heterostructures

An understanding of the growth of (110) quantum wells (QWs) is of great importance to spin systems due to the observed long spin relaxation times. In this article, we report on the metamorphic growth and characterization of high mobility undoped InAs (110) QWs on GaAs (110) substrates. A low-temperature nucleation layer reduces dislocation density, results in tilting of the subsequent buffer layer and increases the electron mobility of the QW structure. The mobility varies widely and systematically (4000–16 000 cm{sup 2}/Vs at room temperature) with deposition temperature and layer thicknesses. Low-temperature transport measurements exhibit Shubnikov de-Haas oscillations and quantized plateaus in the quantum Hall regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mid-infrared electroluminescence from InAs type-I quantum wells grown on InAsP/InP metamorphic buffers

We report room-temperature (RT) electroluminescence (EL) from InAs/InAs{sub x}P{sub 1−x} quantum well (QW) light-emitting diodes (LEDs) over a wide wavelength range of 2.50–2.94 μm. We demonstrate the ability to accurately design strained InAs QW emission wavelengths while maintaining low threading dislocation density, coherent QW interfaces, and high EL intensity. Investigation of the optical properties of the LEDs grown on different InAs{sub x}P{sub 1−x} metamorphic buffers showed higher EL intensity and lower thermal quenching for QWs with higher barriers and stronger carrier confinement. Strong RT EL intensity from LEDs with narrow full-width at half-maximum shows future potential for InAs QW mid-infrared laser diodes on InAsP/InP.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Metamorphic narrow-gap InSb/InAsSb superlattices with ultra-thin layers

Metamorphic strain compensated InSb/InAsSb 0.52 superlattices (SLs) with ultrathin layers and different periods grown on GaSb substrate were designed, fabricated, and characterized. It was shown that a period increase from 3 to 6.2 nm reduced the effective bandgap energy from 70 to 0 meV. A further increase in the period leads to inversion of the valence and conduction bands. Magneto-optical experiments demonstrated that Dirac-like carrier dispersion is characteristic of almost gapless InSb/InAsSb 0.52 SLs. Indication of hole transport enhancement over that found in InAsSb/InAsSb SL structures is presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dirac energy spectrum and inverted bandgap in metamorphic InAsSb/InSb superlattices

A Dirac-type energy spectrum was shown in gapless ultra-short-period metamorphic InAsSb/InSb superlattices by angle-resolved photoemission spectroscopy (ARPES) measurements. The Fermi velocity value 7.4x10 5 m/s in a gapless superlattice with a period of 6.2nm is in a good agreement with the results of magneto-absorption experiments. An “inverted” bandgap opens in the center of the Brillouin zone at higher temperatures and in the superlattice with a larger period. The ARPES data suggest the presence of a surface electron accumulation layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication artifacts and parallel loss channels in metamorphic epitaxial aluminum superconducting resonators

Fabrication of coplanar waveguide resonators with internal quality factors near 10 6 remains challenging. In this work, high-purity single crystal superconductors are implemented through metamorphic epitaxial aluminum that is grown via molecular beam epitaxy on silicon and sapphire substrates. X- ray diffraction and scanning transmission electron microscopy indicate an abrupt highly ordered interface that results in crystal relaxation within a few monolayers of the substrate interface and no measurable interfacial contamination. Quarter- wave coplanar waveguide resonators are fabricated using optical lithography and measured at temperatures below 100 mK. Post measurement characterization with charge contrast imaging in a scanning electron microscope identifies processing artifacts at the waveguide sidewalls, on the exposed substrate area and on the exposed aluminum surface. Of primary importance are processing induced corrosion defects on aluminum sidewalls, nanoparticle contamination, and photoresist residue that are difficult to remove without affecting the superconductor material. Likely correlations between these artifacts and the measured quality factor are discussed in context of device to device variations in resonator performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly Transparent Compositionally Graded Buffers for New Metamorphic Multijunction Solar Cell Designs

The development of compositionally graded buffer layers (CGBs) with enhanced transparency would enable novel five and six junction solar cells, with efficiencies approaching 50% under high concentration. Here, we demonstrate highly transparent grades between the GaAs and InP lattice constants on both A- and B-miscut GaAs substrates, employing Al x GayIn 1-x-y As and highly Se-doped Burstein-Moss (BM) shifted Ga x In 1-x P. Transparency to >810 and >890 nm wavelengths is demonstrated with BM-shifted Ga x In 1-x P on B-miscut substrates and Al x GayIn 1-x-y As/Ga x In 1-x P(Se) combined grades on A-miscut substrates, respectively. 0.74 eV GaInAs solar cells grown on these transparent CGBs exhibit Woc = 0.41 V at mA/ cm 2 , performance comparable with the state-of-the-art Ga x In 1-x P grade employed in the four-junction-inverted metamorphic multijunction (IMM) cell. A GaAs/0.74cV GaInAs tandem cell was grown with a transparent BM-shifted Ga x In 1-x P CGB to verify the CGB performance in a multijunction device structure. Quantum efficiency measurements indicate that the CGB is completely transparent to photons below the GaAs bandedge, validating its use in 4-6 junction IMM devices with a single-graded buffer. Furthermore, this tandem represents a highly efficient two-junction band gap combination, achieving 29.6% ± 1.2% efficiency under the AM1.5 global spectrum, demonstrating how the additional transparency enables new device structures.

14 SOLAR ENERGY↗

Internal Resistive Barriers Related to Zinc Diffusion During the Growth of Inverted Metamorphic Multijunction Solar Cells

Majority carrier barriers at heterointerfaces are a common source of non-linear resistance that hinders concentrator solar cell performance. The source of a particular barrier is often unclear in a multijunction device with numerous heterointerfaces. In this work, we demonstrate Zn-dopant diffusion during inverted metamorphic multijunction (IMM) device growth to be one key cause of internal barrier formation. Using an inverted GaAs/GaAs tandem solar cell with a high temperature annealing layer grown in between each subcell, we simulate the annealing conditions of a multijunction growth in a simplified structure. Through analysis of the device by secondary ion mass spectrometry (SIMS) and electrochemical capacitance-voltage profiling, we show that annealing causes Zn to diffuse out of the top cell Ga 0.5 In 0.5 P back surface field (BSF) and accumulate in the GaAs base. Through equilibrium band modeling, we show that the resultant doping profile forms an energetic barrier to hole flow in the valence band, which correlates with fill factor losses in the current-voltage curves measured under concentration. When we, instead, employ a C-doped Al 0.2 Ga 0.8 As BSF layer in the top cell, we do not observe evidence of a heterojunction barrier. We attribute this difference to the reduced diffusivity of carbon, confirmed by SIMS, as well as more favorable valence band offsets between GaAs and Al 0.2 Ga 0.8 As. Finally, we compare 5-junction IMM cells with Al 0.2 Ga 0.8 As:C and Ga 0.5 In 0.5 P:Zn BSF layers in the GaAs third junction, respectively, and show a significantly improved concentrator device performance when Al 0.2 Ga 0.8 As:C is employed. Lastly, we demonstrate the importance of designing annealing tolerance into multijunction structures that are subjected to extended annealing during growth.

14 SOLAR ENERGY↗

Photo-Electrochemical Hydrogen Generation from Inverted Metamorphic Multijunction III-Vs

Our goal is to improve solar-to-hydrogen (STH) efficiency from just over 10% to over 20% via novel tandem semiconductor materials and configurations. Our primary focus is to develop inverted metamorphic multijunction (IMM) III-V semiconductors that have bandgaps optimized for water splitting. We will also discuss measurement challenges in appraising STH efficiency, some of which are specific to tandem absorbers. Using more stringent measurement standards, we have confirmed 16.2% STH on our most advanced IMM devices.

14 SOLAR ENERGY↗

Effect of Doping Density on the Performance of Metamorphic GaInAs Solar Cells Grown by Dynamic Hydride Vapor Phase Epitaxy

We study the effect of doping density on the performance of inverted metamorphic ~1 eV GaInAs solar cells grown by dynamic hydride vapor phase epitaxy. We find that the doping efficiency of Se in this material is extremely high, with 5x10 17 cm -3 being the lowest controlled value we could achieve with our present Se source. We compared rear heterojunction devices grown with intentional n-doping of 5x10 17 cm -3 and unintentional n-doping of 5x10 15 cm -3 . The intentionally doped sample exhibited an open circuit voltage ~80 mV higher than the unintentionally doped sample due to reduced dark current, and a bandgap voltage offset, or W OC , of 0.407 V. We believe that future doping optimization will improve carrier collection and W OC in these devices.

GaAs↗

Characterization of Metamorphic GaAsP/Si Materials and Devices for Photovoltaic Applications

GaAsyP{sub 1-y} anion-sublattice compositionally graded buffers and device structures were grown directly on Si(100) substrates by way of a high-quality GaP integration layer, yielding GaAsP target layers having band gaps of photovoltaic interest (1.65-1.8 eV), free of antiphase domains/borders, stacking faults, and microtwins. GaAsyP{sub 1-y} growths on both Si and GaP substrates were compared via high-resolution X-ray diffractometry of the metamorphic buffers and deep-level transient spectroscopy (DLTS) of p{sup +}-n diodes that are lattice matched to the final buffer layer. Structural analysis indicates highly efficient epitaxial relaxation throughout the entire growth structure for both types of samples and suggests no significant difference in physical behavior between the two types of samples. DLTS measurements performed on GaAsP diodes fabricated on both Si and GaP substrates reveal the existence of identical sets of traps residing in the n-type GaAsP layers in both types of samples: a single majority carrier (electron) trap, which is located at EC - 0.18 eV, and a single minority carrier (hole) trap, which is located at EV + 0.71 eV. Prototype 1.75-eV GaAsP solar cell test devices grown on GaAsyP{sub 1-y}/Si buffers show good preliminary performance characteristics and offer great promise for future high-efficiency III-V photovoltaics integrated with Si substrates and devices.

14 SOLAR ENERGY↗

Influence of buffer-layer construction and substrate orientation on the electron mobilities in metamorphic In{sup 0.70}Al{sup 0.30}As/In{sup 0.76}Ga{sup 0.24}As/In{sup 0.70}Al{sup 0.30}As structures on GaAs substrates

The influence of construction of the buffer layer and misorientation of the substrate on the electrical properties of In{sup 0.70}Al{sup 0.30}As/In{sup 0.76}Ga{sup 0.24}As/In{sup 0.70}Al{sup 0.30}As quantum wells on a GaAs substrate is studied. The temperature dependences (in the temperature range of 4.2 K < T < 300 K) and field dependences (in magnetic fields as high as 6 T) of the sample resistances are measured. Anisotropy of the resistances in different crystallographic directions is detected; this anisotropy depends on the substrate orientation and construction of the metamorphic buffer layer. In addition, the Hall effect and the Shubnikov–de Haas effect are studied. The Shubnikov–de Haas effect is used to determine the mobilities of electrons separately in several occupied dimensionally quantized subbands in different crystallographic directions. The calculated anisotropy of mobilities is in agreement with experimental data on the anisotropy of the resistances.

36 MATERIALS SCIENCE↗