Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Magnetic properties and transformation of crystal structure in the ErFe{sub 2}-ErAl{sub 2} system

The modification of structural properties and magnetic behaviour of the ErFe{sub 2−x}Al{sub x} Laves phase intermetallic compounds have been studied while changing the Al content in the range 0.36 ≤ x ≤ 1.5. Powder X-ray diffraction study at room temperature showed the formation of the cubic C15 structure, in the samples with Al content of 0.36 ≤ x < 0.75 and 1.4 ≤ x ≤ 2.0. For the intermediate compositions with 0.75 ≤ x ≤ 1.4, the hexagonal C14 structure is observed. Magnetic and magnetocaloric properties of polycrystalline ErFe{sub 2−x}Al{sub x} intermetallic compounds were investigated experimentally using magnetic and heat capacity measurements. The Curie temperature T{sub C} decreases from 275 to 28 K as the Al content increases from x = 0.36 to x = 1.5, respectively. Magnetization measurements in strong magnetic fields showed the complex mechanism of magnetic saturation in the studied compounds. Under an external field change from 0 to 2 T, the maximum entropy change is 6 J/kg K at T = 28 K for the composition with x = 1.5. The minimum in the concentration dependence of the magnetic entropy change is observed in the vicinity of x equal to 1.25. Regularities of variations of magnetocaloric properties of ErFe{sub 2−x}Al{sub x} intermetallic compounds with increasing Al content are discussed from the point of view of their both structural and magnetic states.

36 MATERIALS SCIENCE↗

Preliminary Stress-Annealing Process and its Effect on Magnetic Properties of Fe-based Soft Magnetic Alloys

Stress-annealing (SA) is a novel secondary processing technique capable of significantly increasing magnetic anisotropy and controlling magnetic permeability in planar-cast amorphous precursor ribbons. In this technical memorandum, measures taken to improve the mechanical handling of brittle Fe-based ribbons are described for a custom SA system. This system was then used to process a series of Fe-based alloys (Fe-2Nb-2Mo-1Cu-15.5Si-7B at.%, Fe-5Co-3Ta-1Cu-16Si-6.5B at.%, and Fe-5Co-3Ta-1Cu-16.5Si-6B at.%) and the resulting magnetic properties were determined. The Fe-5Co-3Ta-1Cu-16.5Si-6B at.% alloy was found to be the most promising composition of the three in terms of surviving an optimized spool-to-spool continuous SA process under 90 MPa of tensile stress at 650 °C using a feed rate of 75.5 in/min, which equated to approximately 10 second anneal time. These optimally annealed ribbons exhibited flat hysteresis loops with a saturation magnetization of nearly 1.2 T, low magnetic coercivity (≈ 2 A m-1), and relative permeability of approximately 500.

soft magnetic alloy↗

Structural Electronic and Magnetic Properties of Quasi-1D Quantum Magnets [Ni(HF2)(pyz)2]X (pyz = pyrazine; X = PF6- SbF6-) Exhibiting Ni-FHF-Ni and Ni-pyz-Ni Spin Interactions

[Ni(HF{sub 2})(pyz){sub 2}]X {l_brace}pyz = pyrazine; X = PF{sub 6}{sup -} (1), SbF{sub 6}{sup -} (2){r_brace} were structurally characterized by synchrotron X-ray powder diffraction and found to possess axially compressed NiN{sub 4}F{sub 2} octahedra. At 298 K, 1 is monoclinic (C2/c) with unit cell parameters, a = 9.9481(3), b = 9.9421(3), c = 12.5953(4) {angstrom}, and {beta} = 81.610(3){sup o} while 2 is tetragonal (P4/nmm) with a = b = 9.9359(3) and c = 6.4471(2) {angstrom} and is isomorphic with the Cu-analogue. Infinite one-dimensional (1D) Ni-FHF-Ni chains propagate along the c-axis which are linked via {mu}-pyz bridges in the ab-plane to afford three-dimensional polymeric frameworks with PF{sub 6}{sup -} and SbF{sub 6}{sup -} counterions occupying the interior sites. A major difference between 1 and 2 is that the Ni-F-H bonds are bent (157{sup o}) in 1 but are linear in 2. Ligand field calculations (LFT) based on an angular overlap model (AOM), with comparison to the electronic absorption spectra, indicate greater {pi}-donation of the HF{sub 2}{sup -} ligand in 1 owing to the bent Ni-F-H bonds. Magnetic susceptibility data for 1 and 2 exhibit broad maxima at 7.4 and 15 K, respectively, and {lambda}-like peaks in dxT/dT at 6.2 and 12.2 K that are ascribed to transitions to long-range antiferromagnetic order (TN). Muon-spin relaxation and specific heat studies confirm these TN's. A comparative analysis of x vs T to various 1D Heisenberg/Ising models suggests moderate antiferromagnetic interactions, with the primary interaction strength determined to be 3.05/3.42 K (1) and 5.65/6.37 K (2). However, high critical fields of 19 and 37.4 T obtained from low temperature pulsed-field magnetization data indicate that a single exchange constant (J1D) alone is insufficient to explain the data and that residual terms in the spin Hamiltonian, which could include interchain magnetic couplings (J), as mediated by Ni-pyz-Ni, and single-ion anisotropy (D), must be considered. While it is difficult to draw absolute conclusions regarding the magnitude (and sign) of J and D based solely on powder data, further support offered by related Ni(II)-pyz compounds and our LFT and density-functional theory (DFT) results lead us to a consistent quasi-1D magnetic description for 1 and 2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic properties of Co-Zr-B magnets produced by spark plasma sintering method

Magnets of Co-Zr-B, one of the permanent magnetic compounds without rare-earth elements, were successfully produced by the spark plasma sintering method. The resultant Co-Zr-B magnets had high densities of 92%–96% and consisted mainly of the Co{sub x}Zr (x ≈ 5) phase. The coercivity of the Co-Zr-B magnets was highly dependent on the consolidation temperature and the boron content. The highest maximum energy product of 6.0 MGOe, with a remanence of 6.4 kG and the coercivity of 4.0 kOe, was achieved by the Co{sub 80}Zr{sub 18}B{sub 2} magnets consolidated at 873 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of pulsed laser deposition-fabricated isotropic Fe-Pt film magnets

A high-speed pulsed laser deposition method with the deposition rate of several tens of microns per 1 h enabled us to obtain isotropic Fe-Pt thick film magnets. Increase in the laser power enabled us to obtain as-deposited films with L1{sub 0} ordered phase due to the heat radiation from a target, which means that a substrate heating system and a post-annealing process are not required to achieve hard magnetic properties in the process. Use of an Fe-rich target enhanced the magnetic properties, and as a result (BH){sub max} value exceeded 100 kJ/m{sup 3} in an isotropic Fe-Pt film fabricated at the power of 3 W, which was comparable to those of isotropic Fe-Pt thick film magnets prepared by a sputtering method.

36 MATERIALS SCIENCE↗

Fe and Co nanostructures embedded into the Cu(100) surface: Self-Organization and magnetic properties

The self-organization and magnetic properties of small iron and cobalt nanostructures embedded into the first layer of a Cu(100) surface are investigated using the self-learning kinetic Monte Carlo method and density functional theory. The similarities and differences between the Fe/Cu(100) and the Co/Cu(100) are underlined. The time evolution of magnetic properties of a copper monolayer with embedded magnetic atoms at 380 K is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High temperature structural and magnetic properties of cobalt nanorods

We present in this paper the structural and magnetic properties of high aspect ratio Co nanoparticles ({approx}10) at high temperatures (up to 623 K) using in-situ X ray diffraction (XRD) and SQUID characterizations. We show that the anisotropic shapes, the structural and texture properties are preserved up to 500 K. The coercivity can be modelled by {mu}{sub 0}H{sub C}=2(K{sub MC}+K{sub shape})/M{sub S} with K{sub MC} the magnetocrystalline anisotropy constant, K{sub shape} the shape anisotropy constant and M{sub S} the saturation magnetization. H{sub C} decreases linearly when the temperature is increased due to the loss of the Co magnetocrystalline anisotropy contribution. At 500 K, 50% of the room temperature coercivity is preserved corresponding to the shape anisotropy contribution only. We show that the coercivity drop is reversible in the range 300-500 K in good agreement with the absence of particle alteration. Above 525 K, the magnetic properties are irreversibly altered either by sintering or by oxidation. - Graphical abstract: We present in this paper the structural and magnetic properties of high aspect ratio Co nanorods ({approx}10) at high temperatures (up to 623 K) using in-situ X-ray diffraction and SQUID characterizations. We show that the anisotropic shapes, the structural and texture properties are preserved up to 500 K. Above 525 K, the magnetic properties are irreversibly altered either by sintering or by oxidation. Highlights: Black-Right-Pointing-Pointer Ferromagnetic Co nanorods are prepared using the polyol process. Black-Right-Pointing-Pointer The structural and texture properties of the Co nanorods are preserved up to 500 K. Black-Right-Pointing-Pointer The magnetic properties of the Co nanorods are irreversibly altered above 525 K.

36 MATERIALS SCIENCE↗

Effects of La Doping and Zn or O Vacancy on the Magnetic Property of ZnO

Research on the magnetic origin and mechanism of La-doped ZnO system has been controversial. To solve this problem, we studied the effects of La doping and Zn or O vacancy on the magnetic property of ZnO using geometry optimization and energy calculation on the basis of first-principle generalized gradient approximation method of density functional theory. The electronic structures and magnetic properties of undoped ZnO, La-doped ZnO system, and systems with coexisting La doping and Zn or O vacancies were calculated. Results showed that the systems of La-doped ZnO and the coexistence of La doping and O vacancy are nonmagnetic. In addition, the system of La replacing Zn and one Zn vacancy exhibits long-range orderly ferromagnetism, and the Curie temperature of the doping system can achieve room temperature. The magnetism source of the systems with La doping and Zn vacancy coexisting in ZnO demonstrates strong hybrid coupling electron exchange effects existing among Zn-4s, Zn-3p, O-2p, and La-5s orbits that are nearest to the Zn vacancy. The next nearest distance between doping and Zn vacancy leads to the lowest formation energy and highest stability under the same doping condition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of wear on structure-sensitive magnetic properties of ceramic ferrite in contact with magnetic tape

Wear experiments and electron microscopy and diffraction studies were conducted to examine the wear and deformed layers in single-crystal Mn-Zn (ceramic) ferrite magnetic head material in contact with magnetic tape and the effects of that contact on magnetic properties. The crystalline state of the single-crystal magnetic head was changed drastically during the sliding process. A nearly amorphous structure was produced on its wear surface. Deformation in the surficial layer of the magnetic head was a critical factor in readback signal loss above 2.5 dB. The signal output level was reduced as applied normal load was increased. Considerable plastic flow occurred on the magnetic tape surface with sliding, and the signal loss due to the tape wear was approximately 1 dB.

Miyoshi, K.↗

Effect of the number of interfaces on the magnetic properties of [SnO{sub 2}/Cu-Zn ferrite] multilayer

The [SnO{sub 2}/Cu-Zn ferrite (CZF)]{sub n} (n = 5, 10, 15, and 20) multilayer (ML) were deposited by rf-magnetron sputtering to study their magnetic properties. The magnetization and ferromagnetic resonance (FMR) measurements were undertaken to understand the effect of interfaces on the magnetic properties of these ML. FMR signal line shape changes from asymmetric to symmetric as n increases. The FMR signal peak to peak intensity, FMR linewidth, effective and saturation magnetization and coercivity exhibit oscillations as a function of n. In the parallel configuration the resonance field increases with increase in n, presumably due to the decrease in the active layer to dead layer thickness ratio. The interlayer coupling is strong in the ML with n = 5 leading to the formation of spin waves. The ML interlayer coupling and anisotropy decreases with increasing n. The oscillatory behavior of the magnetic properties can be ascribed to the nonmonotonic variations in the structure and the geometry of the interfaces.

36 MATERIALS SCIENCE↗

Magnetic properties and structural transitions of orthorhombic fluorite-related compounds Ln{sub 3}MO{sub 7} (Ln=rare earths, M=transition metals)

Magnetic properties and structural transitions of ternary rare-earth transition-metal oxides Ln{sub 3}MO{sub 7} (Ln=rare earths, M=transition metals) were investigated. In this study, we prepared a series of molybdates Ln{sub 3}MoO{sub 7} (Ln=La-Gd). They crystallize in an orthorhombic superstructure of cubic fluorite with space group P2{sub 1}2{sub 1}2{sub 1}, in which Ln{sup 3+} ions occupy two different crystallographic sites (the 8-coordinated and 7-coordinated sites). All of these compounds show a phase transition from the space group P2{sub 1}2{sub 1}2{sub 1} to Pnma in the temperature range between 370 and 710 K. Their magnetic properties were characterized by magnetic susceptibility measurements from 1.8 to 400 K and specific heat measurements from 0.4 to 400 K. Gd{sub 3}MoO{sub 7} shows an antiferromagnetic transition at 1.9 K. Measurements of the specific heat for Sm{sub 3}MoO{sub 7} and the analysis of the magnetic specific heat indicate a 'two-step' antiferromagnetic transition due to the ordering of Sm magnetic moments in different crystallographic sites, i.e., with decreasing temperature, the antiferromagnetic ordering of the 7-coordinated Sm ions occur at 2.5 K, and then the 8-coordinated Sm ions order at 0.8 K. The results of Ln{sub 3}MoO{sub 7} were compared with the magnetic properties and structural transitions of Ln{sub 3}MO{sub 7} (M=Nb, Ru, Sb, Ta, Re, Os, or Ir). -- Graphical Abstract: Magnetic properties and structural transitions of ternary rare-earth transition-metal oxides Ln{sub 3}MO{sub 7} (Ln=rare earths, M=transition metals) were investigated. In this study, we prepared a series of molybdates Ln{sub 3}MoO{sub 7} (Ln=La{approx}Gd). These compounds show a phase transition from the space group P2{sub 1}2{sub 1}2{sub 1} to Pnma in the temperature range between 370 and 710 K. Their magnetic properties were characterized by magnetic susceptibility and specific heat measurements from 0.4 to 400 K. The results of Ln{sub 3}MoO{sub 7} were compared with the magnetic properties and structural transitions of Ln{sub 3}MO{sub 7} (M=Nb, Ru, Sb, Ta, Re, Os, or Ir).

36 MATERIALS SCIENCE↗

Heptacopper(II) and dicopper(II)-adenine complexes: synthesis, structural characterization, and magnetic properties

The syntheses, crystal structures, and magnetic properties of two new copper(II) complexes with molecular formulas [Cu 7 (μ 2 -OH 2 ) 6 (μ 3 -O) 6 (adenine) 6 (NO 3 ) 2 6H 2 O (1) and [Cu 2 (μ 2 -H 2 O) 2 (adenine) 2 (H 2 O) 4 ](NO 3 ) 4 2H 2 O (2) are reported. We composed the heptanuclear compound of a central octahedral CuO 6 core sharing edges with six adjacent copper octahedra. In 2, the copper octahedra shares one equatorial edge. In both compounds, these basic copper cluster units are further linked by water bridges and bridging adenine ligands through N3 and N9 donors. All copper(II) centers exhibit Jahn-Teller distorted octahedral coordination characteristic of a d 9 center. Our study of the magnetic properties of the heptacopper complex revealed a dominant ferromagnetic intra-cluster interaction, while the dicopper complex exhibits antiferromagnetic intra-dimer interactions with weakly ferromagnetic inter-dimer interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of milling time on magnetic properties and structures of bulk Sm-Co/{alpha}-(Fe, Co) nanocomposite magnets

Bulk Sm-Co/{alpha}-(Fe,Co) nanocomposite magnets were fabricated by hot pressing composite powders prepared by high-energy ball milling of magnetically hard SmCo{sub 5} powder and magnetically soft Fe powder. The bulk magnets had a nanocomposite structure consisting of Sm-Co matrix (1:5 H and 1:7 H phases) and {alpha}-(Fe,Co) phases. The Fe-Co particles were distributed uniformly in the Sm-Co matrix. The milling time strongly affects the structures and the magnetic properties of the bulk magnets. Increasing milling time led to a decrease of the amount of 1:5 H phase, an increase in the phase fraction of the 1:7 H phase, and a decrease in the amount of soft phase, which resulted in an increase in magnetization and a decrease in coercivity. Scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS) analyses revealed that inter-diffusion took place between the Sm-Co matrix and Fe particles during the processing.

36 MATERIALS SCIENCE↗

Co thickness dependence of structural and magnetic properties in spin quantum cross devices utilizing stray magnetic fields

We investigate the Co thickness dependence of the structural and magnetic properties of Co thin-film electrodes sandwiched between borate glasses in spin quantum cross (SQC) devices that utilize stray magnetic fields. We also calculate the Co thickness dependence of the stray field between the two edges of Co thin-film electrodes in SQC devices using micromagnetic simulation. The surface roughness of Co thin films with a thickness of less than 20 nm on borate glasses is shown to be as small as 0.18 nm, at the same scanning scale as the Co film thickness, and the squareness of the hysteresis loop is shown to be as large as 0.96–1.0. As a result of the establishment of polishing techniques for Co thin-film electrodes sandwiched between borate glasses, we successfully demonstrate the formation of smooth Co edges and the generation of stray magnetic fields from Co edges. Theoretical calculation reveals that a strong stray field beyond 6 kOe is generated when the Co thickness is greater than 10 nm at a junction gap distance of 5 nm. From these experimental and calculation results, it can be concluded that SQC devices with a Co thickness of 10–20 nm can be expected to function as spin-filter devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A facile route to synthesize core/shell structured carbon/magnetic nanoparticles hybrid and their magnetic properties

Graphical abstract: Controllable synthesis of core/shell structured carbon/magnetic nanoparticles hybrid and their tunable magnetic properties. - Highlights: • The paper reports a simple route for core/shell structured carbon/magnetic nanoparticles hybrid. • By controlling the temperature, Fe{sub 3}O{sub 4}@CNCs, Fe@HCNTs and Fe@LCNTs were produced selectively. • The magnetic properties of the obtained core/shell structured hybrid could be tuned effectively. - Abstract: By controlling the pyrolysis temperature, core/shell structured Fe{sub 3}O{sub 4}/carbon nanocages, Fe/helical carbon nanotubes and Fe/low helicity of carbon nanotubes could be synthesized selectively over Fe{sub 2}O{sub 3} nanotubes generated by a hydrothermal method. The transmission electron microscopic and scanning electron microscopic investigations revealed that the efficiency of generating core/shell structured hybrid was high, exceeding 90%. Because of the magnetic nanoparticles tightly wrapped in graphitic layers, the obtained core/shell structured hybrids showed high stability and good magnetic properties. And the magnetic properties of the obtained core/shell structured hybrid could be tuned by the decomposition temperature and time. Therefore, a simple, inexpensive and environment-benign route was proposed to produce magnetism-tunable core/shell structured hybrid in large quantities.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic properties of bio-synthesized zinc ferrite nanoparticles

The magnetic properties of zinc ferrite (Zn-substituted magnetite, Zn{sub y}Fe{sub 1-y}Fe{sub 2}O{sub 4}) formed by a microbial process compared favorably with chemically synthesized materials. A metal reducing bacterium, Thermoanaerobacter, strain TOR-39 was incubated with Zn{sub x}Fe{sub 1-x}OOH (x=0.01, 0.1, and 0.15) precursors and produced nanoparticulate zinc ferrites. Composition and crystalline structure of the resulting zinc ferrites were verified using X-ray fluorescence, X-ray diffraction, transmission electron microscopy, and neutron diffraction. The average composition from triplicates gave a value for y of 0.02, 0.23, and 0.30 with the greatest standard deviation of 0.02. Average crystallite sizes were determined to be 67, 49, and 25 nm, respectively. While crystallite size decreased with more Zn substitution, the lattice parameter and the unit cell volume showed a gradual increase in agreement with previous literature values. The magnetic properties were characterized using a superconducting quantum interference device magnetometer and were compared with values for the saturation magnetization (M{sub s}) reported in the literature. The averaged M{sub s} values for the triplicates with the largest amount of zinc (y=0.30) gave values of 100.1, 96.5, and 69.7 emu/g at temperatures of 5, 80, and 300 K, respectively indicating increased magnetic properties of the bacterially synthesized zinc ferrites.

42 ENGINEERING↗

Design guidance for ferrites: Insights from density functional theory on magnetic properties

A grand challenge in materials research is identifying the relationship between composition and performance. Herein, we explore this relationship for magnetic properties, specifically magnetic saturation (M s ) and magnetocrystalline anisotropy energy (K) of ferrites. Ferrites are materials derived from magnetite (chemical formula = Fe 3 O 4 ) that comprise metallic elements such as Fe, Mn, Ni, Co, Cu and Zn. Experimentally, synthesizing and characterizing ferrites is time consuming. Further, selection of compositions to achieve particular magnetic properties currently relies on intuition. To address this, in this work, density functional theory (DFT) is used to predict M s and K for 571 ferrite structures. These structures are primarily double-substituted non-stoichiometric ferrites with formulae M1 x M2 y Fe 3–x–y O 4 , where M1 and M2 can be Mn, Ni, Co, Cu and/or Zn and 0 ≤ x ≤ 1 and y = 1–x. Calculated magnetic properties for the structures in this study vary from 0.04 × 10 5 to 9.6 × 10 5 A m −1 for M s and from 0.02 × 10 5 to 14.08 × 10 5 J m −3 for K. All structures are made publicly available in a FAIR database.

36 MATERIALS SCIENCE↗