Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Li”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Laser ablation for structuring Li-ion electrodes for fast charging and its impact on material properties, rate capability, Li plating, and wetting

Laser ablation is a scalable technique for decreasing the effective tortuosity of electrodes by selectively removing material with high precision. Applied to ≈ 110 um thick electrode coatings, this work focuses on understanding the impact of laser ablation on electrode material properties at the beginning of life and synergistic impacts of ablated channels on cell performance throughout their cycle life. Post laser ablation, local changes in chemistry, crystallography, and morphology of the laser-impacted electrode regions are investigated. It is shown that femtosecond pulsed laser ablation can achieve high-rate material removal with minor material damage locally at the interface of the impacted zones. The capacity achieved during a 6C (10 min) constant-current constant-voltage charge to 4.2 V improved from 1 mAh cm -2 for the non-ablated electrodes to almost 2 mAh cm -2 for the ablated electrodes. This benefit is attributed to a synergistic effect of enhanced wetting and decreased electrode tortuosity. The benefit was maintained for over 120 cycles, and upon disassembly decreased Li-plating on the graphite anode was observed. Finally, multi-physics modeling in conjunction with wetting analyses showed that laser ablating either one of the electrodes led to substantial improvements in wetting and rate capability, indicating that substantial performance benefits can be achieved by ablating only the graphite anode as apposed to both electrodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Ab initio Molecular Dynamics Assessment of Thermodynamic and Transport Properties in (K,Li)Cl and (K, Na)Cl Molten Salt Mixtures

Molten salt mixtures are integral part of highly important technological applications such as nuclear reactors. However, due to inherent difficulties associated with experiment at high temperatures and the intrinsic complexity of liquid-phase multi-component systems, understanding their properties at a molecular level remains a challenge. Here, we report on an ab initio molecular dynamics investigation on structural, electronic, transport, and thermal properties of two common molten salt mixtures, (K, Li)Cl and (K,Na)Cl, at five different compositions and three temperatures. Most of the properties were found to depend on both composition and temperature. While properties, like atomic charges, show additive behaviors, other properties, such as electrical conductivity, show considerable deviations from additivity. We shall show that the mixing of the molten salt mixtures is mainly driven by entropy, and that the KCl and LiCl mix better than KCl and NaCl. Our computational results are in general consistent with available experimental data. Comparison with available theoretical data is also provided.

Nguyen, Manh Thuong↗
DOE OSTI2025

High Li + Transference Number Electrolyte Enabled by Fluoride Acceptor for Low-Temperature Li-Ion Batteries

To enable wide-temperature operation of lithium-ion batteries (LIBs), new electrolyte formulations have been developed to enhance the performance, particularly at low temperatures. A key challenge lies in achieving both high ionic conductivity and a high lithium-ion transference number due to their inherent trade-off. In this study, we designed an electrolyte system comprising tris(pentafluorophenyl)borane (TPFPB), a fluoride acceptor, and LiF salt in ethylene carbonate (EC)-free solvents. TPFPB, with its electron-deficient boron center, facilitates fluoride transfer reactions that promote the dissociation of otherwise insoluble LiF. When methyl acetate (MA) was used as the solvent, the electrolyte exhibited a high transference number (t Li + = 0.85) and ionic conductivity (σ = 5.0 × 10 –3 S cm –1 ). The optimized electrolyte demonstrated excellent performance at −20 °C, with no evidence of lithium plating. This work presents a new strategy for electrolyte design by leveraging cation desolvation to achieve high-performance LIBs for low-temperature and high-power applications.

anions↗
DOE OSTI2021

Unlocking anionic redox activity in O3-type sodium 3 d layered oxides via Li substitution

Sodium ion batteries, because of their sustainability attributes, could be an attractive alternative to Li-ion technology for specific applications. However, it remains challenging to design high energy density and moisture stable Na-based positive electrodes. Here, we report an O3-type NaLi 1/3 Mn 2/3 O 2 phase showing anionic redox activity, obtained through a ceramic process by carefully adjusting synthesis conditions and stoichiometry. This phase shows a sustained reversible capacity of 190 mAh g -1 that is rooted in cumulative oxygen and manganese redox processes as deduced by combined spectroscopy techniques. Unlike many other anionic redox layered oxides so far reported, O3-NaLi 1/3 Mn 2/3 O 2 electrodes do not show discernible voltage fade on cycling. This finding, rationalized by density functional theory, sheds light on the role of inter- versus intralayer 3d cationic migration in ruling voltage fade in anionic redox electrodes. Another practical asset of this material stems from its moisture stability, hence facilitating its handling and electrode processing. Altogether, this work offers future directions towards designing highly performing sodium electrodes for advanced Na-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Impact of surface coating on electrochemical and thermal behaviors of a Li-rich Li 1.2 Ni 0.16 Mn 0.56 Co 0.08 O 2 cathode

Lithium-rich layered oxide materials are considered as potential cathode materials for future high-performance lithium-ion batteries (LIBs) owing to their high operating voltage and relatively high specific capacity. However, perceptible issues such as poor rate performance, poor capacity retention, and voltage degradation during cycling need to be improved before the successful commercialization of the material. In this report, zirconia coated Li 1.2 Ni 0.16 Mn 0.56 Co 0.08 O 2 2 = 1.0, 1.5 and 2.0 wt%) materials are synthesized using a sol–gel assisted ball milling approach. A comparison of structural, morphological and electrochemical properties is examined to elucidate the promising role of ZrO 2 coating on the performance of the NMC cathode. A uniform and homogeneous ZrO 2 coating is observed on the surface of NMC particles as evident by TEM elemental mapping images. The ZrO 2 coated NMCs exhibit significantly improved electrochemical performance at a higher C-rate as compared to pristine material. 1.5% ZrO 2 coated NMC demonstrates better cycling stability (95% capacity retention) than pristine NMC (77% capacity retention) after 50 cycles. All ZrO 2 coated NMC materials demonstrated improved thermal stability compared to pristine material. The difference in onset temperature of 2 wt% ZrO 2 coated and pristine NMC is 20 °C. The improved electrochemical performance of ZrO 2 coated NMC can be attributed to the stabilization of its surface structure due to the presence of ZrO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Determining the Length Scale of Transport Impedances in Li-Ion Electrodes: Li(Ni 0.33 Mn 0.33 Co 0.33 )O 2

Battery cathodes are complex multiscale, multifunctional materials. The length scale at which the dominant impedance arises may be difficult to determine even with the most advanced experimental characterization efforts, and thus modeling can play an important role in analysis. Discharge and voltage relaxation curves, interrogated with theory, are used to distinguish between transport impedance that arise on the scale of the active crystal and on the scale of agglomerates (secondary particles) comprised of nanoscale crystals. Model-selection algorithms are applied to determine that the agglomerate scale is dominant in the Li Ni 0.33 Mn 0.33 Co 0.33 O 2 electrode studied here. Furthermore, conditions where the agglomerate and crystal-scale models yield distinct simulation results are demonstrated, providing approaches that can be applied to other systems.

25 ENERGY STORAGE↗
DOE OSTI2020

Beneficial Effect of Li 5 FeO 4 Lithium Source for Li-Ion Batteries with a Layered NMC Cathode and Si Anode

The energy density of lithium-ion batteries can be increased by replacing the traditional graphite anode with a high capacity silicon anode. However, volume changes and interfacial instabilities cause a large irreversible capacity and a continual loss of lithium during cycling, which lead to rapid capacity loss. In this work, we add Li 5 FeO 4 (LFO) to a LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC) cathode as a pre-lithiation additive, which increases the lithium inventory and extends the cycle life of Si-graphite/NMC full cells, and decreases the NMC particle degradation. LFO delivers a large 764 mAh g –1 LFO capacity below 4.7 V vs Li/Li + . By tuning the LFO content in Si-graphite/LFO-NMC full cells, we show higher capacity, improved retention, lower impedance, and superior rate performance compared to full cells without LFO. Post-test characterizations demonstrate that LFO inclusion in the cathode matrix leads to less NMC secondary particle segregation/cracking and a thinner surface reduced layer on the NMC particles. The beneficial effects of LFO endure after the lithium reserve has been exhausted, highlighting a lasting synergy between the lithium source and electrode active materials. This study introduces a new approach to simultaneously increase lithium inventory and reduce cathode degradation, and makes critical advances toward enabling Si anodes for lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Review–From LiMn 2 O 4 to Partially-Disordered Li 2 MnNiO 4 : The Evolution of Lithiated-Spinel Cathodes for Li-Ion Batteries

This personal narrative relates to the discovery in 1981 of stoichiometric LiM 2 O 4 spinel electrodes (where M = metal cation) for lithium-ion batteries by the Goodenough group at Oxford University, UK, and the subsequent identification and evolution of stable lithiated-spinel Li 2 M 2 O 4 (or LiMO 2 ) cathodes at the Council for Scientific and Industrial Research in South Africa and Argonne National Laboratory (USA). In this work, the competition that occurs between the formation of lithiated-spinel and layered (LiMO 2 ) structures at 400 °C, and recent efforts to design high-capacity, Mn-rich composite cathodes with partial disorder, are discussed. The paper is written in honor of John Goodenough's 100th birthday.

25 ENERGY STORAGE↗