Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Large Eddy Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Large-Eddy Simulation of Axisymmetric Compression Corner Flow

The Wall-Modeled Large Eddy Simulation (WMLES) approach is used to study the interaction of a shock wave with a high Reynolds number turbulent boundary layer. Since the near wall region is modeled, high Reynolds number turbulent flows can be simulated at a moderate computational cost. The case considered is that of an axisymmetric Mach 2.85 turbulent boundary layer over a 30 compression corner. The Reynolds number of the boundary layer upstream of the interaction based on momentum thickness (Re theta = u sub infinity theta/v sub infinity) is ~12,000. The geometry and flow conditions match the experiments of Dunagan et al. (NASA TM 88227, 1986). The simulations were performed using equilibrium and non-equilibrium wall models. The agreement with experiment is encouraging for the finest grid with respect to the separation bubble length, unsteady shock structure and wall pressure distribution. Sensitivity ofWMLES results to grid, wall model, and blockage effects in the tunnel are reported.

Iyer, Prahladh S.↗

High-Resolution Large-Eddy Simulations of Historical U.S. Gulf Coast Hurricanes

This dataset provides coupled mesoscale and microscale (large-eddy simulation; LES) atmospheric simulations of five historical U.S. Gulf Coast hurricanes. Meso-microscale coupled simulations of Hurricanes Harvey (2017), Nate (2017), Michael (2018), Laura (2020), and Delta (2020) were performed with the Weather Research and Forecasting (WRF) model v4.1.5. The mesoscale component captures the multi-day evolution of each storm's track, intensity, and large-scale structure across the Gulf of Mexico, while the LES component explicitly resolves the dominant turbulent eddies in the hurricane boundary layer at a horizontal grid spacing of 33.33 m. Together, these simulations characterize tropical cyclone wind fields across atmospheric scales ranging from ~100 km down to ~100 m, spanning storm intensities from Category 2 through Category 4 on the Saffir–Simpson scale. This dataset contains the Large-Eddy simulations. The data will be divided according to the storm intensity level at the simulation time. Category 2: Harvey, Nate Category 3: Michael, Delta Category 4: Michael, Laura

17 WIND ENERGY↗

Large-Eddy Simulation of Laser-Ignited Direct Injection Gasoline Spray for Emission Control

Large-Eddy Simulations (LES) of a gasoline spray, where the mixture was ignited rapidly during or after injection, were performed in comparison to a previous experimental study with quantitative flame motion and soot formation data [SAE 2020-01-0291] and an accompanying Reynolds-Averaged Navier–Stokes (RANS) simulation at the same conditions. The present study reveals major shortcomings in common RANS combustion modeling practices that are significantly improved using LES at the conditions of the study, specifically for the phenomenon of rapid ignition in the highly turbulent, stratified mixture. At different ignition timings, benchmarks for the study include spray mixing and evaporation, flame propagation after ignition, and soot formation in rich mixtures. A comparison of the simulations and the experiments showed that the LES with Dynamic Structure turbulence were able to capture correctly the liquid penetration length, and to some extent, spray collapse demonstrated in the experiments. For early and intermediate ignition timings, the LES showed excellent agreement to the measurements in terms of flame structure, extent of flame penetration, and heat-release rate. However, RANS simulations (employing the common G-equation or well-stirred reactor) showed much too rapid flame spread and heat release, with connections to the predicted turbulent kinetic energy. With confidence in the LES for predicted mixture and flame motion, the predicted soot formation/oxidation was also compared to the experiments. The soot location was well captured in the LES, but the soot mass was largely underestimated using the empirical Hiroyasu model. An analysis of the predicted fuel–air mixture was used to explain different flame propagation speeds and soot production tendencies when varying ignition timing.

42 ENGINEERING↗

Large-eddy simulation of compressible turbulence

The increase in the range of length scales with increasing Reynolds number limits the direct simulation of turbulent flows to relatively simple geometries and low Reynolds numbers. However, since most flows of engineering interest occur at much higher Reynolds number than is currently within the capabilities of full simulation, prediction of these flow fields can only be obtained by solving some suitably-averaged set of governing equations. In the traditional Reynolds-averaged approach, the Navier-Stokes equations are averaged over time. This in turn yields correlations between various turbulence fluctuations. It is these terms, e.g. the Reynolds stresses, for which a turbulence model must be derived. Turbulence modeling of incompressible flows has received a great amount of attention in the literature. An area of research that has received comparatively less attention is the modeling of compressible turbulent flows. An approach to simulating compressible turbulence at high Reynolds numbers is through the use of Large-Eddy Simulation (LES). In LES the dependent variables are decomposed into a large-scale (resolved) component and a sub-grid scale component. It is the small-scale components of the velocity field which are presumably more homogeneous than the large scales and, therefore, more easily modeled. Thus, it seems plausible that simpler models, which should be more universal in character than those employed in second-order closure schemes, may be developed for LES of compressible turbulence. The objective of the present research, therefore, is to explore models for the Large-Eddy Simulation of compressible turbulent flows. Given the recent successes of Zeman in second order closure modeling of compressible turbulence, model development was guided by principals employed in second-order closures.

Squires, Kyle D.↗

Discussion of the potential and limitations of direct and large-eddy simulations

The full text of the discussion paper presented at the Whither Turbulence Workshop on the potential and limitations of direct and large-eddy simulations is provided. Particular emphasis is placed on discussing the role of numerics and mathematical theory in direct simulations of both compressible and incompressible flows. A variety of unresolved issues with large-eddy simulations such as their implementation in high-order finite difference codes, problems with defiltering, and modifications to accommodate integrations to solid boundaries are elaborated on. These as well as other points are discussed in detail along with the authors' views concerning the prospects for future research.

Hussaini, M. Y.↗

A hybrid stochastic-deconvolution model for large-eddy simulation of particle-laden flow

We develop a hybrid model for large-eddy simulation of particle-laden turbulent flow, which is a combination of the approximate deconvolution model for the resolved scales and a stochastic model for the sub-grid scales. The stochastic model incorporates a priori results of direct numerical simulation of turbulent channel flow, which showed that the parameters in the stochastic model are quite independent of Reynolds and Stokes number. In order to correctly predict the flux of particles towards the walls an extra term should be included in the stochastic model, which corresponds to the term related to the well-mixed condition in Langevin models for particle dispersion in inhomogeneous turbulent flow. The model predictions are compared with results of direct numerical simulation of channel flow at a frictional Reynolds number of 950. The inclusion of the stochastic forcing is shown to yield a significant improvement over the approximate deconvolution model for the particles alone when combined with a Stokes dependent weight-factor for the well-mixed term.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large eddy simulation of hydrogen piloted CH 4 /air premixed combustion with CO 2 dilution

Large eddy simulation (LES) of constant adiabatic temperature, hydrogen-piloted, turbulent lean premixed methane/air jet flames with varying amounts of CO 2 addition are reported. Constant adiabatic temperature is achieved by increasing the fuel flow rate slightly to account for the higher specific heat of CO 2 compared to N 2 . Such flames are relevant to low NOx gas turbines with high hydrogen content fuels and Exhaust Gas Recirculation (EGR). A newly designed burner called Piloted Axisymmetric Reactor Assisted Turbulent (PARAT) flame burner was utilized. The operating conditions in the experiment were selected to highlight the kinetic effects of CO 2 addition by matching the Reynolds numbers, Lewis numbers and adiabatic flame temperatures. The LES simulations utilize a finite rate chemistry solver with DRM19 combustion mechanism with adaptive zoning and a dynamic structure turbulence model. A five-level adaptive mesh refinement (AMR) improves the velocity and temperature gradient resolution. The LES predicts the experimentally observed increase in flame length with CO 2 levels caused by a decrease in the turbulent flame speed. The computational results also capture the experimentally observed departure from the thin flame limit and a collapse of the root mean square (RMS) versus mean temperature profiles for the three levels of CO 2 . The flame structure analysis illustrated super-equilibrium CO concentrations because of non-equilibrium chemistry effects caused by the external addition of CO 2 .

08 HYDROGEN↗

Large eddy simulation of turbulent channel flow: ILLIAC 5 calculation

The capabilities of large eddy simulation in the prediction and analyses of wall-bounded turbulent shear flows are demonstrated. The dynamical equations for large scale field motions are derived. The computational grid network is described and its relation to the observed physical length scales in the flow are discussed. Some aspects of the mechanics and structure of the flow are examined both in the vicinity of the wall and in regions away from the wall. An attempt is made to correlate numerical results with laboratory observations. Other significant observations and conclusions are presented.

Kim, J.↗

Large-eddy simulations of turbulent wake flows behind helical- and straight-bladed vertical axis wind turbines rotating at low tip speed ratios

Turbulent wake flows behind helical- and straight-bladed vertical axis wind turbines (VAWTs) rotating at low tip speed ratios (TSRs) are studied numerically. The turbulent flows are simulated using the large-eddy simulation (LES) model, and the rotating turbine blades are modeled using the actuator line method. The helical VAWT has identical key parameters as the straight VAWT except for the 135° helical twist of the blades over the 0.3m vertical span. A set of LES runs are performed for two TSRs, 0.6 and 0.4, and the results are reported and analyzed. At these low TSRs, the wake behind the straight-bladed VAWT exhibits two-dimensional dominant flow motions (in the horizontal plane perpendicular to the straight blades) in the near-wake region that cause considerable spanwise expansion of the wake as it extends downstream. In contrast, the helical-bladed VAWT generates highly three-dimensional (3D) wake flow structures and upward/downward mean flow motions within the wake that cause the wake to expand mainly in the vertical direction. Turbulence statistical analyses also show that the 3D wake flow features induced by the helical blades accelerate the wake transition to turbulence and enhance the small-scale turbulent dissipation (as shown by the subgrid-scale turbulent dissipation in the LES), which leads to a more rapid decay of the wake turbulence intensity than that in the straight-bladed VAWT case at the same TSR. Finally, compared with the straight-bladed VAWT, the helical-bladed VAWT also exhibits much smaller temporal variations for the torque and power coefficients during the rotation cycle, which can be beneficial for wind power generation.

17 WIND ENERGY↗

Intercomparison of Large-eddy Simulations of Arctic Mixed-phase Clouds: Importance of Ice Size Distribution Assumptions

Large-eddy simulations of mixed-phase Arctic clouds by 11 different models are analyzed with the goal of improving understanding and model representation of processes controlling the evolution of these clouds. In a case based on observations from the Indirect and Semi-Direct Aerosol Campaign (ISDAC), it is found that ice number concentration, Ni, exerts significant influence on the cloud structure. Increasing Ni leads to a substantial reduction in liquid water path (LWP) and potential cloud dissipation, in agreement with earlier studies. By comparing simulations with the same microphysics coupled to different dynamical cores as well as the same dynamics coupled to different microphysics schemes, it is found that the ice water path (IWP) is mainly controlled by ice microphysics, while the inter-model differences in LWP are largely driven by physics and numerics of the dynamical cores. In contrast to previous intercomparisons, all models here use the same ice particle properties (i.e., mass-size, mass-fall speed, and mass-capacitance relationships) and a common radiation parameterization. The constrained setup exposes the importance of ice particle size distributions (PSD) in influencing cloud evolution. A clear separation in LWP and IWP predicted by models with bin and bulk microphysical treatments is documented and attributed primarily to the assumed shape of ice PSD used in bulk schemes. Compared to the bin schemes that explicitly predict the PSD, schemes assuming exponential ice PSD underestimate ice growth by vapor deposition and overestimate mass-weighted fall speed leading to an underprediction of IWP by a factor of two in the considered case.

Arctic↗

Approximate solutions of the filtered radiative transfer equation in large eddy simulations of turbulent reactive flows

An analysis of the relevance of turbulence-radiation interaction in the numerical simulation of turbulent reactive flows is presented. A semi-causal stochastic model was used to generate a time-series of turbulent scalar fluctuations along optical paths of Sandia flame D, a widely studied piloted turbulent jet nonpremixed flame. The radiative transfer equation was integrated along these paths for every realization using a grid resolution typical of a direct numerical simulation. The correlated k-distribution method was employed to compute the radiative properties of the medium. The results were used to determine the ensemble average, as well as the extreme values, of quantities that indicate the importance of the turbulence-radiation interaction. Several approximate methods are then proposed to solve the filtered radiative transfer equation in the framework of large eddy simulations. The proposed methods are applicable along with combustion models that either assume the filtered probability density function of a conserved scalar or solve a transport equation for a joint scalar or joint scalar/velocity filtered density function. It is concluded that the errors resulting from neglecting the turbulence-radiation interaction in large eddy simulations are much lower than those found in Reynolds-averaged Navier-Stokes calculations. The optically thin fluctuation approximation may be extended to large eddy simulations yielding predictions in excellent agreement with the reference solution. If the turbulence-radiation interaction is accounted for using this approximation, the average relative error of the filtered total radiation intensity is generally below 0.3% for the studied flame. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigations of correlation and coherence in turbulence from a large-eddy simulation

Abstract. Microscale flow descriptions are often given in terms of mean quantities, turbulent kinetic energy, and/or stresses. Those metrics, while valuable, give limited information about turbulent eddies and coherent turbulent structures. This work investigates the structure of an atmospheric boundary layer using coherence and correlation in space and time with a range of separation distances. We calculate spatial correlations over entire planes of velocity fluctuations, from which we can evaluate the correlation along different directions at different spacings. Similarly, coherence of the three velocity components over separations in the three directions is also investigated. We apply these analyses to a mesoscale–microscale coupled scenario with time-varying conditions and examine nuances in spatial correlations that are often overlooked. Through these analyses and results, this work highlights important differences observed in terms of coherence when comparing large-eddy simulation data to simpler models and suggests ways to improve these simpler models. We note that such differences are important for disciplines like wind energy structural dynamic analysis, in which blade loading and fatigue depend strongly on the structure of the turbulence. We emphasize the additional wealth of data that can be provided by typical atmospheric boundary layer large-eddy simulation when correlation and coherence analysis is included, and we also state the limitations of large-eddy simulation data, which inherently truncate the smaller scales of turbulence.

17 WIND ENERGY↗

An assessment of atypical mesh topologies for low-Mach large-eddy simulation

An implicit, low-dissipation, low-Mach, variable density control volume finite element formulation is used to explore foundational understanding of numerical accuracy for large-eddy simulation applications on hybrid meshes. Detailed simulation comparisons are made between low-order hexahedral, tetrahedral, pyramid, and wedge/prism topologies against a third-order, unstructured hexahedral topology. Using smooth analytical and manufactured low-Mach solutions, design-order convergence is established for the hexahedral, tetrahedral, pyramid, and wedge element topologies using a new open boundary condition based on energy-stable methodologies previously deployed within a finite-difference context. A wide range of simulations demonstrate that low-order hexahedral- and wedge-based element topologies behave nearly identically in both computed numerical errors and overall simulation timings. Moreover, low-order tetrahedral and pyramid element topologies also display nearly the same numerical characteristics. Although the superiority of the hexahedral-based topology is clearly demonstrated for trivial laminar, principally-aligned flows, e.g., a 1x2x10 channel flow with specified pressure drop, this advantage is reduced for non-aligned, turbulent flows including the Taylor–Green Vortex, turbulent plane channel flow ( Re τ 395), and buoyant flow past a heated cylinder. With the order of accuracy demonstrated for both homogenous and hybrid meshes, it is shown that solution verification for the selected complex flows can be established for all topology types. Although the number of elements in a mesh of like spacing comprised of tetrahedral, wedge, or pyramid elements increases as compared to the hexahedral counterpart, for wall-resolved large-eddy simulation, the increased assembly and residual evaluation computational time for non-hexahedral is offset by more efficient linear solver times. Lastly, most simulation results indicate that modest polynomial promotion provides a significant increase in solution accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Turbulent shear-layer mixing: initial conditions, and direct-numerical and large-eddy simulations

Aspects of turbulent shear-layer mixing are investigated over a range of shear-layer Reynolds numbers, $Re_{\unicode[STIX]{x1D6FF}}=\unicode[STIX]{x0394}U\unicode[STIX]{x1D6FF}/\unicode[STIX]{x1D708}$ , based on the shear-layer free-stream velocity difference, $\unicode[STIX]{x0394}U$ , and mixing-zone thickness, $\unicode[STIX]{x1D6FF}$ , to probe the role of initial conditions in mixing stages and the evolution of the scalar-field probability density function (p.d.f.) and variance. Scalar transport is calculated for unity Schmidt numbers, approximating gas-phase diffusion. The study is based on direct-numerical simulation (DNS) and large-eddy simulation (LES), comparing different subgrid-scale (SGS) models for incompressible, uniform-density, temporally evolving forced shear-layer flows. Moderate-Reynolds-number DNS results help assess and validate LES SGS models in terms of scalar-spectrum and mixing estimates, as well as other metrics, to $Re_{\unicode[STIX]{x1D6FF}}\lesssim 3.3\times 10^{4}$ . High-Reynolds-number LES investigations to $Re_{\unicode[STIX]{x1D6FF}}\lesssim 5\times 10^{5}$ help identify flow parameters and conditions that influence the evolution of scalar variance and p.d.f., e.g. marching versus non-marching. Initial conditions that generate shear flows with different mixing behaviour elucidate flow characteristics in each flow regime and identify elements that induce p.d.f. transition and scalar-variance behaviour. P.d.f. transition is found to be largely insensitive to local flow parameters, such as $Re_{\unicode[STIX]{x1D6FF}}$ , or a previously proposed vortex-pairing parameter based on downstream distance, or other equivalent criteria. The present study also allows a quantitative comparison of LES SGS models in moderate- and high- $Re_{\unicode[STIX]{x1D6FF}}$ forced shear-layer flows.

Mechanics↗

Wall-Modeled Large Eddy Simulation Method for Unstructured-Grid Navier-Stokes Solvers

This paper reports on the implementation and assessment of a Wall-Modeled Large-Eddy Simulation (WMLES) methodology in an unstructured-grid, node-centered flow solver, FUN3D that is developed and supported at the NASA Langley Research Center. Finite-volume (FV) and finite-element (FE) discretization schemes considered in the study provide formal second-order spatial accuracy. Large-Eddy Simulations (LES) resolve large-scale turbulent-flow features and filter out small-scale effects using the Vreman subgrid-scale model. At solid-wall boundaries, a shear-stress model is employed to provide a proper boundary-flux closure. The nonlinear equations are integrated in time using either an optimized backward difference formula or an implicit multistage Runge-Kutta temporal scheme. The implicit equations at each time step are solved by strong nonlinear iteration schemes. WMLES demonstrations are shown for two high-lift configurations, namely, the McDonnell Douglas 30P30N multielement airfoil and a NASA High-Lift Common Research Model. Results show that the WMLES approaches implemented in the FV and FE discretization methods produce consistent solutions and are capable of capturing key aerodynamic characteristics and flow structures for high-lift configurations at a wide range of angles of attack including maximum-lift conditions. In the 30P30N example, correct trends in the variations of integrated aerodynamic forces and moments, surface pressure distributions, and boundary-layer profiles are captured as the Reynolds number is increased.

CFD; turbulence modeling; High-Lift flow simulatio↗

Large eddy simulation of a turbulent non-reacting spray jet

We performed Large Eddy Simulation (LES) of a turbulent non-reacting n-Heptane spray jet, referred to as Spray H in the Engine Combustion Network (ECN), and executed a data analysis focused on key LES metrics such as fraction of resolved turbulent kinetic energy and similarity index. In the simulation, we used the dynamic structure model for the sub-grid stress, and the Lagrangian-based spray-parcel models coupled with the blob-injection model. The finest mesh-cell size used was characterized by an Adaptive Mesh Refinement (AMR) cell size of 0.0625 mm. To obtain ensemble statistics, we performed 28 numerical realizations of the simulation. Demonstrated by the comparison with experimental data in a previous study [7], this LES has accurately predicted global quantities, such as liquid and vapor penetrations. The analysis in this work shows that 14 realizations of LES are sufficient to provide a reasonable representation of the average flow behavior that is benchmarked against the 28-realization ensemble. With the current mesh, numerical schemes, and sub-grid scale turbulence model, more than 95% of the turbulent kinetic energy is directly resolved in the flow regions of interest. The large-scale flow structures inferred from a statistical analysis reveal a region of disorganized flow around the peripheral region of the spray jet, which appears to be linked to the entrainment process.

Hu, Bing↗

Large-eddy simulation, fuel rod vibration and grid-to-rod fretting in pressurized water reactors

Grid-to-rod fretting (GTRF) in pressurized water reactors is a flow-induced vibration phenomenon that results in wear and fretting of the cladding material on fuel rods. GTRF is responsible for over 70% of the fuel failures in pressurized water reactors in the United States. Predicting the GTRF wear and concomitant interval between failures is important because of the large costs associated with reactor shutdown and replacement of fuel rod assemblies. The GTRF-induced wear process involves turbulent flow, mechanical vibration, tribology, and time-varying irradiated material properties in complex fuel assembly geometries. This paper presents a new approach for predicting GTRF induced fuel rod wear that uses high-resolution implicit large-eddy simulation to drive nonlinear transient dynamics computations. The GTRF fluid–structure problem is separated into the simulation of the turbulent flow field in the complex-geometry fuel-rod bundles using implicit large-eddy simulation, the calculation of statistics of the resulting fluctuating structural forces, and the nonlinear transient dynamics analysis of the fuel rod. Ultimately, the methods developed here, can be used, in conjunction with operational management, to improve reactor core designs in which fuel rod failures are minimized or potentially eliminated. Furthermore, robustness of the behavior of both the structural forces computed from the turbulent flow simulations and the results from the transient dynamics analyses highlight the progress made towards achieving a predictive simulation capability for the GTRF problem.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗