Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LUNAR OBSERVATORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

System concepts for a series of lunar optical telescopes

The Lunar Telescope Working Group of the Marshall Space Flight Center, NASA, has conducted conceptual studies of an evolutionary family of UV/ optical/IR telescopes to be based on the lunar surface. Included are: (1) the 16-m aperture Large Lunar Telescope; (2) the 4-m aperture precursor Lunar Cluster Telescope Experiment; and (3) the 2-m Lunar Transit Telescope proposed by John McGraw of the Steward Observatory. Development and emplacement of these advanced astronomical facilities would parallel the buildup of an initial lunar exploration site, an early lunar outpost, and a permanent lunar base. The Working Group has examined the feasibility of constructing such telescopes and assessed technology, subsystem, system, transportation, and operations requirements for their development and emplacement. Influences of the lunar environment and site selection on telescope design and operation were also evaluated.

Nein, Max E.↗
NASA NTRS1990

Observations of potassium in the tenuous lunar atmosphere

Observations of neutral potassium (K) in the tenuous lunar atmosphere are described. An echelle spectrograph, CCD, and data acquisition system are used to obtain emission spectra of neutral K atoms in the lunar atmosphere as observed by the 1.54 telescope at the Catalina Observatory at first quarter the night of April 29, 1989. A table of relevant lunar atmosphere parameters summarizes the results of the investigation. It is found that the number density at the surface is 9.5 + or - 1 atoms per cu cm and that there is a large nonthermal component and a deficiency of atoms equilibrated to the surface temperature. The calculated thermalization rate of the nonthermal component through encounters with the lunar surface gives a source of strength for the thermal component factor of 7 greater than loss by photoionization. Possible explanations for the low thermalized population observed are considered.

Kozlowski, Richard W. H.↗
NASA NTRS1979

Lunar laser ranging data identification and management

Activity under the subject grant during the first half of fiscal year 1979 at the University of Texas at Austin is reported. Raw lunar laser ranging data submitted by McDonald Observatory, Fort Davis, Texas and by the Australian Division of National Mapping at Orroral Valley, Australia were processed. This processing includes the filtering of signal events from noise photons, normal point formation, data archive management, and data distribution. System-wide program maintenance and up-grade carried out wherever and whenever necessary. Lunar laser ranging data is being transmitted from Austin to Paris for the extraction of earth rotation information during the EROLD campaign.

Source record↗
NASA NTRS1989

A lunar far-side very low frequency array

Papers were presented to consider very low frequency (VLF) radio astronomical observations from the moon. In part 1, the environment in which a lunar VLF radio array would function is described. Part 2 is a review of previous and proposed low-frequency observatories. The science that could be conducted with a lunar VLF array is described in part 3. The design of a lunar VLF array and site selection criteria are considered, respectively, in parts 4 and 5. Part 6 is a proposal for precursor lunar VLF observations. Finally, part 7 is a summary and statement of conclusions, with suggestions for future science and engineering studies. The workshop concluded with a general consensus on the scientific goals and preliminary design for a lunar VLF array.

Burns, Jack O.↗
NASA NTRS2020

Telescopic Observations of Lunar Hydration: Variations and Abundance

Prior to 2009, the Moon was believed to be anhydrous. However, observations by three spacecraft revealed a hydrated surface by reporting a 3 μm absorption band attributed to hydroxyl and possibly molecular water. The Moon Mineralogy Mapper (M3) spectrometer, onboard the Chandrayaan-1 spacecraft is mainly used to study the lunar 3 μm band but its spectral range ends at 3 μm. The limited wavelength range of M3 has allowed observed variations in the 3 μm band to be called into question due to uncertainties in thermal corrections. To investigate the validity of variations in the lunar 3 μm band, we used the SpeX infrared spectrograph at the NASA InfraRed Telescope Facility at Maunakea Observatory in Hawaiʻi. With SpeX, we are able to obtain lunar data over a wavelength range of 1.67 to 4.2 μm at 1 – 2 km spatial resolution. The long wavelengths provide strong constraints on thermal emission corrections. We confirm that the 3 μm band varies with lunar time of day as well as with latitude and composition. Each observation reveals strong variations in abundances of hydroxyl and possibly molecular water. The data reveal a decrease in abundance with increasing lunar local time, an asymmetric trend about the equator that favors the southern latitudes, and higher concentrations in highland regions. The longer wavelengths provided by SpeX have allowed us to examine variations in the 3 μm band and provide definitive evidence that the variations are due to changes in hydration.

C. I. Honniball↗
NASA NTRS1988

21st century astronomical observatories on the moon

The advantages and disadvantages of building astronomical observatories on the moon are described. Several modest facilities that could be placed near an early lunar base are described, such as a 1-m optical telescope and a gamma-ray burst detector. Several more elaborate observatories are discussed, such as a lunar far-side very low frequency array, an optical interferometer, and a moon-earth ultralong baseline radio interferometer.

Burns, Jack O.↗
NASA NTRS1989

Lunar shuttle

Current plans for the extension of human presence into the solar system include the establishment of a permanently occupied base on the Moon for use as a source of raw materials, a transportation node, a facility for the fabrication and launch of elements of the space exploration infrastructure, and a base for scientific investigation and astronomical observatories. All of the aforementioned uses of a lunar base foresee the requirement for a lunar shuttle to operate from the lunar surface to one or more orbiting space stations located in low lunar orbits (LLO). The Utah State University lunar shuttle design is baslined for implementation after a mature lunar base has been established. The shuttle is designed to operate between the lunar base and a space station located in a 400-km-altitude orbit. This orbit was chosen with reference to Apollo experience, which has indicated that very low orbits, on the order of 100-km, may be unstable over periods of many months. After a thorough investigation of the anticipated needs and production capabilities of a lunar base, several design requirements were placed upon the shuttle. These requirements are (1) maximum use of lunar-derived propellant; (2) modularity and payload versatility; (3) two-way transport of 25-metric-ton cargo; (4) human transport capability; (5) satellite servicing; and (6) 3000-kg mass budget.

Voyer, P.↗
NASA NTRS2008

Lunar Science from Laser Ranging - Present and Future

The interior properties of the Moon influence lunar tides and rotation. Three-axis rotation (physical librations) and tides are sensed by tracking lunar landers. The Lunar Laser Ranging (LLR) experiment has acquired 38 yr of increasingly accurate ranges from observatories on the Earth to four corner cube retroreflector arrays on the Moon. Lunar Laser Ranging is reviewed in [1]. Recent lunar science results are in [4,5]. In this abstract present LLR capabilities are described followed by future possibilities.

Lunar Laser Ranging (LLR)↗
NASA NTRS2018

Calibration of the DSCOVR EPIC Visible and NIR Channels using MODIS Terra and Aqua Data and EPIC Lunar Observations

The unique position of the Deep Space Climate Observatory (DSCOVR) Earth Polychromatic Imaging Camera (EPIC) at the Lagrange 1 point makes an important addition to the data from currently operating low Earth orbit observing instruments. EPIC instrument does not have an onboard calibration facility. One approach to its calibration is to compare EPIC observations to the measurements from polar-orbiting radiometers. Moderate Resolution Imaging Spectroradiometer (MODIS) is a natural choice for such comparison due to its well-established calibration record and wide use in remote sensing. We use MODIS Aqua and Terra L1B 1km reflectances to infer calibration coefficients for four EPIC visible and NIR channels: 443, 551, 680 and 780 nm. MODIS and EPIC measurements made between June 2015 and 2016 are employed for comparison. We first identify favorable MODIS pixels with scattering angle matching temporarily collocated EPIC observations. Each EPIC pixel is then spatially collocated to a subset of the favorable MODIS pixels within 25 km radius. Standard deviation of the selected MODIS pixels as well as of the adjacent EPIC pixels is used to find the most homogeneous scenes. These scenes are then used to determine calibration coefficients using a linear regression between EPIC counts/sec and reflectances in the close MODIS spectral channels. We present thus inferred EPIC calibration coefficients and discuss sources of uncertainties. The lunar EPIC observations are used to calibrate EPIC O2 absorbing channels (688 and 764 nm), assuming that there is a small difference between moon reflectances separated by approx.10 nm in wavelength provided the calibration factors of the red (680 nm) and near-IR (780 nm) are known from comparison between EPIC and MODIS.

Geogdzhayev, Igor V.↗
NASA NTRS1995

Lunar-based optical telescopes: Planning astronomical tools of the twenty-first century

A succession of optical telescopes, ranging in aperture from 1 to 16 m or more, can be deployed and operated on the lunar surface over the next half-century. These candidates to succeed NASA's Great Observatories would capitalize on the unique observational advantages offered by the Moon. The Lunar Telescope Working Group and the LUTE Task Team of the George C. Marshall Space Flight Center (MSFC) have assessed the feasibility of developing and deploying these facilities. Studies include the 16-m Large Lunar Telescope (LLT); the Lunar Cluster Telescope Experiment (LCTE), a 4-m precursor to the LLT; the 2-m Lunar Transit Telescope (LTT); and its precursor, the 1-m Lunar Ultraviolet Telescope Experiment (LUTE). The feasibility of developing and deploying each telescope was assessed and system requirements and options for supporting technologies, subsystems, transportation, and operations were detailed. Influences of lunar environment factors and site selection on telescope design and operation were evaluated, and design approaches and key tradeoffs were established. This paper provides an overview of the study results. Design concepts and brief system descriptions are provided, including subsystem and mission options selected for the concepts.

Hilchey, J. D.↗
NASA NTRS1982

Intercomparison of lunar laser and traditional determinations of earth rotation

Since August, 1969, ranges to one or more retroreflector arrays on the lunar surface have been measured by means of a laser procedure. Analysis of these measurements improves determination, not only of the orbit and librations of the moon, but also of the rotational parameters of the earth, including the X and Y coordinates of the terrestrial pole, and the true rotational angle of the earth with respect to atomic or to broadcast time. The considered approach for deriving the Universal Time 1 (UT1) involves two steps. During the first step the parameters of the lunar orbit and librations are solved along with the coordinates of the retroreflectors on the moon and of the observatory. Improved values of the Universal Time 0 (UT0) and range corrections at the observatory are obtained in the second step. Attention is given to lunar laser ranging (LLR), raw data in UT1, an harmonic analysis of the LLR UT1 data, and data obtained in 1980. The results provide UT1 with an accuracy of a factor of 2 or more better than was previously available from conventional astrometric data.

Fliegel, H. F.↗
NASA NTRS1972

Laser system of extended range

A pulsed laser system was developed for range measurements from the earth to retroreflecting satellites at distances up to that of the moon. The system has a transportable transmitter unit that can be moved from one location to another. This unit consists of a 0.2 m coude refractor and a high radiance, neodymium-glass, frequency doubled laser that operates in a single transverse mode. It can be used for lunar or distant satellite ranging at any observatory that has a telescope with an aperture diameter of about 1.5 m for the detection of the laser return pulses. This telescope is utilized in the same manner customarily employed for the observation of celestial objects. A special photometric package and the associated electronics are provided for laser ranging.

Lehr, C. G.↗
NASA NTRS1973

Potentialities of lunar laser ranging for measuring tectonic motions.

The lunar laser-ranging system at McDonald Observatory, Texas, is currently attaining accuracies of plus or minus 15 cm, and plus or minus 3 cm appears feasible. Numerical error analyses containing 97 parameters (35 of them for error sources) indicate that the plus or minus 3 cm system would measure station motions to plus or minus 1 cm/year accuracy within a year for east-west motions and within about 3 years for north-south. Furthermore, the correlations of station motions with other parameters are low, so that it is unlikely that the estimate is too optimistic because of modeling inadequacies of the error analysis.

Kaula, W. M.↗
NASA NTRS1975

Space science

A fact sheet on the NASA space science program is presented. Some of the subjects considered include the following: (1) the Orbiting Astronomical Observatory, (2) the Orbiting Solar Observatory, (3) the Small Astronomy Satellite, (4) lunar programs, (5) planetary programs using the Mariner, Pioneer 10, and Viking space probes, and (6) the Scout, Thor-Delta, and Atlas-Centaur launch vehicles. For each program there is a description of the effort, the schedule, management, program officials, and funding aspects in outline form.

Source record↗
NASA NTRS1981

Short period tidal variations of earth rotation

It is explained that the tidal deformation of the earth's polar moment of inertia by the moon and sun cause periodic variations in rotation. The short period oscillations give rise to a meter-sized, diurnal signature in the lunar laser ranging data obtained at McDonald Observatory. A solution is given for the scale parameter k/C at fortnightly and monthly tidal frequencies. The results are compared with those obtained by other investigators and with a theoretical estimate which includes the effect of oceans and a decoupled fluid core.

Yoder, C. F.↗
NASA NTRS1967

1967 Aeronautics and Space Report

This document includes Surveyor, Lunar Orbiter, Apollo 4, Biosatellite, Orbiting Geophysical Observatory, Orbiting Solar Observatory, Explorers, Applications Technology satellites, operational satellites, Mariner to Venus, San Marco, sounding rockets, and aeronautical research.

Source record↗
NASA NTRS2017

Systems Engineering Challenges for GSFC Space Science Mission Operations

The NASA Goddard Space Flight Center Space Science Mission Operations (SSMO) project currently manages19 missions for the NASA Science Mission Directorate, within the Planetary, Astrophysics, and Heliophysics Divisions. The mission lifespans range from just a few months to more than20 years. The WIND spacecraft, the oldest SSMO mission, was launched in 1994. SSMO spacecraft reside in low earth, geosynchronous,highly elliptical, libration point, lunar, heliocentric,and Martian orbits. SSMO spacecraft range in size from 125kg (Aeronomy of Ice in the Mesosphere (AIM)) to over 4000kg (Fermi Gamma-Ray Space Telescope (Fermi)). The attitude modes include both spin and three-axis stabilized, with varying requirements on pointing accuracy. The spacecraft are operated from control centers at Goddard and off-site control centers;the Lunar Reconnaissance Orbiter (LRO), the Solar Dynamics Observatory (SDO) and Magnetospheric MultiScale (MMS)mission were built at Goddard. The Advanced Composition Explorer (ACE) and Wind are operated out of a multi-mission operations center, which will also host several SSMO-managed cubesats in 2017. This paper focuses on the systems engineeringchallenges for such a large and varied fleet of spacecraft.

Spacecraft↗