Response of Apollo 12 lunar dust to reagents simulative of those in the weathering environment of earth
Apollo 12 lunar dust sample 12070,128, determining response to effective agents of earth-type chemical weathering
Huang, W. H.↗
SEARCH · Engineering Papers
Results for “LUNAR DUST”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Lunar Dust and Its Impact on Human Exploration: A NASA Engineering and Safety Center (NESC) Workshop
The NASA Engineering and Safety Center (NESC) former Chief Scientist provided support to produce an NESC final report on the " Lunar Dust and Its Impact on Human Exploration" workshop held February 11 - 13, 2020, in Houston, Texas. This report follows the standard NESC report format to describe the findings, observations, and NESC recommendations developed by the workshop participants.
Lunar Dust; Human Exploration; NASA Engineering an↗
Inhalation Toxicity of Ground Lunar Dust Prepared from Apollo-14 Soil
Within the decade one or more space-faring nations intend to return humans to the moon for more in depth exploration of the lunar surface and subsurface than was conducted during the Apollo days. The lunar surface is blanketed with fine dust, much of it in the respirable size range (<10 micron). Eventually, there is likely to be a habitable base and rovers available to reach distant targets for sample acquisition. Despite designs that could minimize the entry of dust into habitats and rovers, it is reasonable to expect lunar dust to pollute both as operations progress. Apollo astronauts were exposed briefly to dust at nuisance levels, but stays of up to 6 months on the lunar surface are envisioned. Will repeated episodic exposures to lunar dust present a health hazard to those engaged in lunar exploration? Using rats exposed to lunar dust by nose-only inhalation, we set out to investigate that question.
James, John T.↗
Simulant Materials of Lunar Dust: Requirements and feasibility
As NASA turns its exploration ambitions towards the Moon once again, the research and development of new technologies for lunar operations face the challenge of meeting the milestones of a fast-pace schedule, reminiscent of the 1960 s Apollo program. While the lunar samples returned by the Apollo and Luna missions have revealed much about the Moon, these priceless materials exist in too scarce quantities to be used for technology development and testing. The need for mineral materials chosen to simulate the characteristics of lunar regoliths is a pressing issue that must be addressed today through the collaboration of scientists, engineers and program managers. While the larger size fraction of the lunar regolith has been reproduced in several simulants in the past, little attention has been paid to the fines fraction, commonly refered to as lunar dust. As reported by McKay, this fraction of the lunar regolith below 20 microns can represent upto 30% by mass of the total regolith mass. The issue of reproducing the properties of these fines for research and technology development purposes was addressed by the recently held Workshop on Lunar Regolith Simulant Materials at Marshall Space Flight Center. Preliminary conclusions from the workshop and con- side-rations concerning the feasibility of producing such materials will be presented here.
Sibille, L.↗
Lunar Dust Degradation Effects and Removal/prevention Concepts. Volume 1 - Summary Final Report
Degradation of radiator surfaces due to lunar dust contamination and removal/prevention concepts
Adams, J. G.↗
Strength of the lunar dust.
Strength of overlay of granular material on Moon estimated from Ranger VII photographs, showing fairly steep slopes covered with dust
LUNAR DUST↗
The Effects of Lunar Dust on EVA Systems During the Apollo Missions
Mission documents from the six Apollo missions that landed on the lunar surface have been studied in order to catalog the effects of lunar dust on Extra-Vehicular Activity (EVA) systems, primarily the Apollo surface space suit. It was found that the effects could be sorted into nine categories: vision obscuration, false instrument readings, dust coating and contamination, loss of traction, clogging of mechanisms, abrasion, thermal control problems, seal failures, and inhalation and irritation. Although simple dust mitigation measures were sufficient to mitigate some of the problems (i.e., loss of traction) it was found that these measures were ineffective to mitigate many of the more serious problems (i.e., clogging, abrasion, diminished heat rejection). The severity of the dust problems were consistently underestimated by ground tests, indicating a need to develop better simulation facilities and procedures.
Gaier, James R.↗
The Effects of Lunar Dust on EVA Systems During the Apollo Missions
Mission documents from the six Apollo missions that landed on the lunar surface have been studied in order to catalog the effects of lunar dust on Extra-Vehicular Activity (EVA) systems, primarily the Apollo surface space suit. It was found that the effects could be sorted into nine categories: vision obscuration, false instrument readings, dust coating and contamination, loss of traction, clogging of mechanisms, abrasion, thermal control problems, seal failures, and inhalation and irritation. Although simple dust mitigation measures were sufficient to mitigate some of the problems (i.e., loss of traction) it was found that these measures were ineffective to mitigate many of the more serious problems (i.e., clogging, abrasion, diminished heat rejection). The severity of the dust problems were consistently underestimated by ground tests, indicating a need to develop better simulation facilities and procedures.
Gaier, James R.↗
Toxicity of Lunar Dust in Lungs Assessed by Examining Biomarkers in Exposed Mice
NASA is contemplating to build an outpost on the Moon for prolonged human habitation and research. The lunar surface is covered by a layer of soil, of which the finest portion is highly reactive dust. Dust samples of respirable sizes were aerodynamically isolated from two lunar soil samples of different maturities (cosmic exposure ages) collected during the Apollo 16 mission. The lunar dust samples, TiO2, or quartz, suspended in normal saline were given to groups of 5 C57 male mice by intrapharyngeal aspiration at 0. 1, 0.3, or 1.0 mg/mouse. Because lunar dust aggregates rapidly in aqueous media, some tests were conducted with dusts suspended in Survanta/saline (1:1). The mice were euthanized 7 or 30 days later, and their lungs were lavaged to assess the presence of toxicity biomarkers in bronchioalveolar lavage fluids. The overall results showed that the two lunar dust samples were similar in toxicity, they were more toxic than T102 , but less toxic than quartz. This preliminary study is a part of the large study to obtain data for setting exposure limits for astronauts living on the Moon
Lam, C.-W.↗
Lunar Dust 101
Largely due to rock and soil samples returned during the Apollo program, much has been learned about the composition and properties of lunar regolith. Although, for the most part, the mineral composition resembles terrestrial minerals, the characteristics of the lunar environment have led to very different weathering processes. These result in substantial differences in the particle shapes, particle size distributions, and surface chemistry. These differences lead to non-intuitive adhesion, abrasion, and possible health properties that will pose challenges to future lunar missions. An overview of lunar dust composition and properties will be given with a particular emphasis on possible health effects.
Gaier, James R.↗
Lunar Dust level sensor & Effects on Surfaces (LDES): Percent Area Coverage of Lunar Simulant on a Surface and Fairy Castle Structures
With NASA’s goal of returning humans to the Moon, it has become increasingly important to understand the impact of lunar regolith on spacecraft systems. The ability to measure the level of dust coverage on a surface is essential. Developing an accurate technique to determine percent area coverage is challenging due to the unique and complex layering of the dust particles on the surface, creating fairy castle structures that form complex towers, bridges, and buttresses using the smallest of dust particles as building blocks. For this study, these structures have been simulated using a unique dust distributor device and imaged with a scanning electron microscope. The results show the dusted surface’s complex topology, thus demonstrating the difficulty with determining the percent area of dust coverage. Implications for dust buildup on spacecraft, even at the microscopic level, can include degraded heat transfer and altered optical properties, making continuation of this research critical to support future human exploration of the Moon.
percent area coverage↗
NASA Marshall Impact Testing Facility Capabilities Applicable to Lunar Dust Work
The Impact Testing Facility at Marshall Space Flight Center has several guns that would be of use in studying impact phenomena with respect to lunar dust. These include both ballistic guns, using compressed gas and powder charges, and hypervelocity guns, either light gas guns or an exploding wire gun. In addition, a plasma drag accelerator expected to reach 20 km/s for small particles is under development. Velocity determination and impact event recording are done using ultra-high-speed cameras. Simulation analysis is also available using the SPHC hydrocode.
Evans, Steven W.↗
Evidence for a high altitude distribution of lunar dust
The crew of Apollo 17 saw streamers accompanying spacecraft sunrise. The time variations of the brightness of these streamers indicate that they were produced by light scattering in the lunar vicinity rather than brightness variations of material streamers emanating from the sun. The angular extent of the streamers indicate that the light scattering particulates extended from the lunar surface to above the orbital altitude of the spacecraft. Although observed as typical sunrise phenomena by Apollos 10 and 17, and possibly by 8 and 15 as well, streamers were not observed during the flight of Apollo 16. The scattering particles seem to be present sporadically, most likely lunar dust of tenth micron scale, and not a result of spacecraft contamination.
Mccoy, J. E.↗
Lunar Dust Effects on Space Mechanism Ball Bearings for Sustained Human Lunar Operations
NASA has plans to send humans back to the moon under the Artemis Mission. In 2024, the first humans will set foot on the lunar surface since Apollo 17 in 1972. Additionally, extended plans include a sustained human presence on the moon for long duration habitation. These lofty goals will require many different kinds of space mechanisms including: life support, mobility, excavation, scientific instrumentation, etc. Many of these types of systems utilize rotating machinery which require rolling element bearings. As such, dust tolerance of bearings is a major concern for long life in these critical systems. A research activity has been undertaken to characterize and reduce the damage lunar soil (called regolith) dust causes to bearings. The present work details some preliminary results of ball bearings running with grease intentionally contaminated with known quantities and sizes of lunar simulant particles to assess damage. Various bearing material combinations were tested to determine how certain typical bearing materials respond.
BEARINGS↗
Nonlinear Electrostatic Properties of Lunar Dust
A laboratory experiment was designed to study the induction charging and charge decay characteristics of small dielectric particles, or glass beads. Initially, the goal of the experiment was further understanding of induction charging of lunar dust particles. However, the mechanism of charging became a point of greater interest as the project continued. Within an environmentally-controlled acrylic glove box was placed a large parallel plate capacitor at high-voltage (HV) power supply with reversible polarity. Spherical 1-mm and 0.5-mm glass beads, singly, were placed between the plates, and their behaviors recorded on video and quantified. Nearly a hundred trials at various humidities were performed. The analysis of the results indicated a non-linear relationship between humidity and particle charge exchange time (CET), for both sizes of beads. Further, a difference in CET for top-resting beads and bottom-resting beads hinted at a different charging mechanism than that of simple induction. Results from the I-mm bead trials were presented at several space science and physics conferences in 2008 and 2009, and were published as a Master's thesis in August 2009. Tangential work stemming from this project resulted in presentations at other international conferences in 2010, and selection to attend workshop on granular matter flow 2011.
Irwin, Stacy A.↗
Generation and Evaluation of Lunar Dust Adhesion Mitigating Materials
Particulate contamination is of concern in a variety of environments. This issue is especially important in confined spaces with highly controlled atmospheres such as space exploration vehicles involved in extraterrestrial surface missions. Lunar dust was a significant challenge for the Apollo astronauts and will be of greater concern for longer duration, future missions. Passive mitigation strategies, those not requiring external energy, may decrease some of these concerns, and have been investigated in this work. A myriad of approaches to modify the surface chemistry and topography of a variety of substrates was investigated. These involved generation of novel materials, photolithographic techniques, and other template approaches. Additionally, single particle and multiple particle methods to quantitatively evaluate the particle-substrate adhesion interactions were developed.
Wohl, Christopher J.↗
Evaluation of Surface Modification as a Lunar Dust Mitigation Strategy for Thermal Control Surfaces
Three surface treatments were evaluated for their ability to lower the adhesion between lunar simulant dust and AZ93, AlFEP, and AgFEP thermal control surfaces under simulated lunar conditions. Samples were dusted in situ and exposed to a standardized puff of nitrogen gas. Thermal performance before dusting, after dusting, and after part of the dust was removed by the puff of gas, were compared to perform the assessment. None of the surface treatments was found to significantly affect the adhesion of lunar simulants to AZ93 thermal control paint. Oxygen ion beam texturing also did not lower the adhesion of lunar simulant dust to AlFEP or AgFEP. But a workfunction matching coating and a proprietary Ball Aerospace surface treatment were both found to significantly lower the adhesion of lunar simulants to AlFEP and AgFEP. Based on these results, it is recommended that all these two techniques be further explored as dust mitigation coatings for AlFEP and AgFEP thermal control surfaces.
Gaier, James R.↗
Evaluation of Surface Modification as a Lunar Dust Mitigation Strategy for Thermal Control Surfaces
Three surface treatments were evaluated for their ability to lower the adhesion between lunar simulant dust and AZ93, AlFEP, and AgFEP thermal control surfaces under simulated lunar conditions. Samples were dusted in situ and exposed to a standardized puff of nitrogen gas. Thermal performance before dusting, after dusting, and after part of the dust was removed by the puff of gas, were compared to perform the assessment. None of the surface treatments was found to significantly affect the adhesion of lunar simulants to AZ93 thermal control paint. Oxygen ion beam texturing also did not lower the adhesion of lunar simulant dust to AlFEP or AgFEP. But a workfunction matching coating and a proprietary Ball Aerospace surface treatment were both found to significantly lower the adhesion of lunar simulants to AlFEP and AgFEP. Based on these results, it is recommended that all these two techniques be further explored as dust mitigation coatings for AlFEP and AgFEP thermal control surfaces.
Gaier, James R.↗