Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEVEL WIDTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Materials and Designs for High-Efficacy LED Light Engines

Cree, Inc. conducted a narrow-band downconverter (NBD) materials development and implementation program which will lead to warm-white LED light engines with enhanced efficacy via improved spectral efficiency with respect to the human eye response. New red (600-630nm) NBD materials could result in as much as a 20% improvement in warm-white efficacy at high color quality relative to conventional phosphor-based light sources. Key program innovations included: high quantum yield; narrow peak width; minimized component-level losses due to “cross-talk” and light scattering among red and yellow-green downconverters; and improved reliability to reach parity with conventional phosphors. NBD-enabled downconversion efficiency gains relative to conventional phosphors yielded an end-of-project LED light engine efficacy of >160 lm/W at room temperature and 35 A/cm2, with a correlated color temperature (CCT) of ~3500K and >90 CRI (Color Rending Index). NBD-LED light engines exhibited equivalent luminous flux and color point maintenance at >1,000 hrs. of highly accelerated reliability testing as conventional phosphor LEDs. A demonstration luminaire utilizing an NBD-based LED light engine had a steady-state system efficacy of >150 lm/W at ~3500K and >90 CRI, which exceeded the 2014 DOE R&D Plan luminaire milestone for FY17 of >150 lm/W at just 80 CRI.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Machine learning applied to classifying neutron resonances

The performance of nuclear reactors and other nuclear systems depends on a precise understanding of the neutron interaction cross sections for materials used in these systems. These cross sections exhibit resonance structure whose shape is determined in part by the angular momentum quantum numbers of the resonances. The correct assignment of the quantum numbers of neutron resonances is therefore of paramount importance. In this project, we apply a machine learning technique, namely decision trees, to automate the quantum number assignments. The tree is trained from simulated data generated to mimic the errors found in real data. We explore the use of several physics-motivated features for training our trees, including the nearest neighbor spacing distribution, cumulative level distribution, and channel width distributions. Initial results using random matrix theory motivated fits which demonstrated that we can determine resonance spin groups somewhat reliably. If we use these fits as features in our trees, we can train them to spot outliers corresponding to misassigned resonances. We found that with the large number of features used in this project that the decision tree tended to over t training data resulting in poor performance with respect to the test data. By reducing the number of features, we can achieve nearly perfect assignment of quantum numbers with our training data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Machine Learning for Neutron Resonance Evaluations [Slides]

The performance of nuclear reactors and other nuclear systems depends on a precise understanding of the neutron interaction cross sections for materials used in these systems. These cross sections exhibit a resonance structure whose shape is determined in part by the angular momentum quantum numbers of the resonances. The correct assignment of the quantum numbers of neutron resonances is therefore of paramount importance. In this presentation, we describe the application of machine learning to automate the quantum number assignments. Scikit-learn classifiers were trained on simulated resonance data whose statistical properties were chosen to mimic real data. We explored the use of several physics (and random matrix theory)-motivated features for training the classifiers, including the nearest neighbor spacing distribution, cumulative level distribution, and channel width distributions. Initial results demonstrated that we can determine resonance spin groups somewhat reliably. We are now investigating the application of our approach to 52 Cr resonance data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1979

A comparison of linear acoustic theory with experimental noise data for a small-scale hovering rotor

Linear acoustic calculations based on full aerodynamic data as input are presented and compared with measured cases reported by Boxwell et al. (1978). The full aerodynamic data are obtained using three programs giving radial loading, chordwise loading, and chordwise position of transition. It is shown that in the theoretical results the most significant noise source mechanism is due to blade thickness. Thus the conclusions of Boxwell et al. as to the importance of nonlinearities around the blades are upheld. These conclusions concern the width, shape and the level of the acoustic pressure calculated from linear acoustic theory. Some of the approximations involved in the application of acoustic analogy using quadrupole sources are discussed. It is necessary that the near- and far-field problems of rotating blades be treated together as shown for the case of an oscillating sphere.

Farassat, F.↗
NASA NTRS1980

Synthetic aperture radar range - Azimuth ambiguity design and constraints

Problems concerning the design of a system for mapping a planetary surface with a synthetic aperture radar (SAR) are considered. Given an ambiguity level, resolution, and swath width, the problems are related to the determination of optimum antenna apertures and the most suitable pulse repetition frequency (PRF). From the set of normalized azimuth ambiguity ratio curves, the designer can arrive at the azimuth antenna length, and from the sets of normalized range ambiguity ratio curves, he can arrive at the range aperture length or pulse repetition frequency. A procedure based on this design method is shown in an example. The normalized curves provide results for a SAR using a uniformly or cosine weighted rectangular antenna aperture.

Mehlis, J. G.↗
NASA NTRS1985

Intraband Radiometric Performance of the LANDSAT 4 Thematic Mapper

Those radiometric characteristics of the LANDSAT 4 thematic mapper (TM) that could be established without absolute calibration of spectral data were examined. Radiometrically raw (B type) data of three daytime and two nighttime scenes were used, including TM scenes from Washington, DC; northeast Arkansas; Cape Cod, MA; Roanoke, VA; Richmond, VA; and Silver Bell, AZ. The effective resolution in radiance is degraded by a factor of about 2 by the irregular width of the digital levels. Underpopulated levels are consistent over all bands and detectors, and are spaced an average of 4 digital numbers (DN) apart. In band 6, level 127 is avoided by a factor 30. Several detectors exhibit a change of gain with a period of several scans; the largest effect is about 4%. At high contrast boundaries, some of the detectors in band 5 commonly overshoot by several DN and require about 30 samples to recover. The high frequency noise level of each detector was characterized by the standard deviation of the first derivative in the sample direction across a flat field. A coherent-sinusoidal-noise pattern is evident in detector 1 of band 3. The correlation between the six reflective bands was determined and used to select three groups of bands whose aggregate first principal components contain the greatest total information. A composite of the first components of bands 1, 2, 3, bands 5 and 7, and band 4, together containing 89% of the information in the reflectance bands, has reduced the effect of noise.

Kieffer, H. H.↗
NASA NTRS1989

Adaptive clutter rejection filters for airborne Doppler weather radar applied to the detection of low altitude windshear

An optimum adaptive clutter rejection filter for use with airborne Doppler weather radar is presented. The radar system is being designed to operate at low-altitudes for the detection of windshear in an airport terminal area where ground clutter returns may mask the weather return. The coefficients of the adaptive clutter rejection filter are obtained using a complex form of a square root normalized recursive least squares lattice estimation algorithm which models the clutter return data as an autoregressive process. The normalized lattice structure implementation of the adaptive modeling process for determining the filter coefficients assures that the resulting coefficients will yield a stable filter and offers possible fixed point implementation. A 10th order FIR clutter rejection filter indexed by geographical location is designed through autoregressive modeling of simulated clutter data. Filtered data, containing simulated dry microburst and clutter return, are analyzed using pulse-pair estimation techniques. To measure the ability of the clutter rejection filters to remove the clutter, results are compared to pulse-pair estimates of windspeed within a simulated dry microburst without clutter. In the filter evaluation process, post-filtered pulse-pair width estimates and power levels are also used to measure the effectiveness of the filters. The results support the use of an adaptive clutter rejection filter for reducing the clutter induced bias in pulse-pair estimates of windspeed.

Keel, Byron M.↗
NASA NTRS1991

Observations of intermediate- and high-degree p-mode oscillations during sunspot cycles 21 and 22

Extensive time series of resolved solar images have been available for helioseismological investigations since the late 1970's. The paper presents examples of the frequencies, power levels, modal energies, and widths of solar intermediate-degree and high-degreee p-modes obtained at the Mt. Wilson Observatory's 60-Foot Solar Tower Telescope during the rising phase of the current sunspot cycle. It is shown that the inclusion of frequency splittings from the high-degree p-modes has made it possible to demonstrate that the sun's internal equatorial angular velocity is not constant with radius but varies systematically with radius throughout the solar convection zone and below.

Rhodes, E. J.↗
NASA NTRS1991

Radiative widths and splitting of cyclotron lines in superstrong magnetic fields

The radiative line widths of the Landau levels in a superstrong magnetic field are calculated and simple analytic expressions and fits are given for these which are valid over a wide range of the principal quantum number and the magnetic field strength. If QED corrections are not taken into account, all levels but the first are doubly degenerate, corresponding to the two possible spin projections. However, the interaction with the QED vacuum removes this degeneracy, leading to an energy splitting of each level which exceeds the radiative linewidth for low Landau levels if the magnetic field is not too large (B is less than approximately 10 exp 13 G). Estimations are presented of the splitting in various limits as a function of field strength and Landau number. The possibility of observing this splitting in accreting X-ray pulsars and in gamma-ray bursters is discussed.

Pavlov, G. G.↗
NASA NTRS2019

Indoor Ground Testing of a Small UAS Sense and Avoid Airborne Doppler Radar

The National Aeronautics and Space Administration’s Unmanned Aircraft System (UAS) Traffic Management (UTM) project is researching prototype technologies needed to ensure safe integration of UAS operations into the National Airspace System (NAS). Within the UTM Concept of Operations, UAS would be equipped with on-board Sense and Avoid (SAA) technology to continually monitor for manned and unmanned aircraft in its vicinity while operating beyond visual line of sight in uncontrolled airspace. To support this effort, a candidate commercially available 24.5 GHz Doppler radar was selected and evaluated to determine if the technology could reliably support minimum requirements for SAA applications of small UAS (sUAS). Indoor ground tests were conducted inside the NASA Langley Research Center’s Experimental Test Range (ETR) from a stationary platform to evaluate the Doppler radar performance characteristics and gain operational proficiency before the radar was authorized to transmit outdoors. A high speed linear rail system was developed for the radar evaluation and was shown to be an effective method to generate Doppler radar targets of known radar cross section. The accuracy of the range and velocity reported by the radar was shown to be dependent on the Kalman filter state variance parameter settings. Antenna measurements were collected with the radar installed both on and off a sUAS to quantify the relative antenna gain, beam width and side lobe levels of the radar’s Metamaterial Electronically Scanning Array (MESA) antennas at boresight and extreme field of view pointing vectors. The relative antenna gain measured 2.6 dB lower at extreme field view angles compared to the boresight radiation pattern.

Szatkowski, George N.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-33626-DND

NASA is conducting a series of computational experiments to quantify atmospheric effects on low noise sonic booms. In the current study, simulated cruise nearfield pressure data from NASA?s X-59 Quiet Supersonic Technology aircraft was propagated from the aircraft to the ground at four cardinal headings through five years of realistic atmospheric profiles at 30 locations across the eastern USA. Statistical design of experiments was used to select the locations where primary sonic thump carpet widths (CW) and metric levels at the ground were computed. Atmospheric profiles were taken from the Climate Forecast System Reanalysis database, which contains reanalyzed atmospheric profiles four times daily. Decision tree analyses were performed to determine relative importance of predictors for CW and metric levels. Predictors included were latitude, longitude, date, time of day, season, climate, aircraft heading, and ground elevation. Results of this study indicate the propagation resolution needed to adequately characterize the distributions of CW and ground metric data, i.e., necessary separation distance between propagation locations and total number of atmospheres through which to propagate. This resolution will be used for a follow-on study of simulated X-59 carpets across the entire US mainland.

Will Doebler↗
DOE OSTI2015

Probing electronic lifetimes and phonon anharmonicities in high-quality chemical vapor deposited graphene by magneto-Raman spectroscopy

We present a magneto-Raman study on high-quality single-layer graphene grown by chemical vapor deposition (CVD) that is fully encapsulated in hexagonal boron nitride by a dry transfer technique. By analyzing the Raman D, G, and 2D peaks, we find that the structural quality of the samples is comparable with state-of-the-art exfoliated graphene flakes. From B-field dependent Raman measurements, we extract the broadening and associated lifetime of the G peak due to anharmonic effects. Furthermore, we determine the decay width and lifetime of Landau level (LL) transitions from magneto-phonon resonances as a function of laser power. At low laser power, we find a minimal decay width of 140 cm{sup −1} highlighting the high electronic quality of the CVD-grown graphene. At higher laser power, we observe an increase of the LL decay width leading to a saturation, with the corresponding lifetime saturating at a minimal value of 18 fs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Discovery of the new isotope 251 Lr and the α-decay fine structure in 253 L

The products of the 203, 205 Tl ( 50 Ti, 2n) fusion-evaporation reactions were studied using the recently commissioned Argonne Gas-Filled Analyzer at Argonne National Laboratory. Two α-decay activities with energies of 9210(19) and 9246(19) keV and half-lives of $42^{+42}_{-14}$ and $24.4^{+7.0}_{-4.5}$ ms were observed which were followed by the known α decays of 247 Md and 243 Es . They are interpreted as originating from the 1/2 ⁻ [521] and 7/2 ⁻ [514] single-proton Nilsson states in the hitherto unknown isotope 251 Lr . From the measured Q α values the 1/2 ⁻ level was placed 117(27) keV above the 7/2 - level in 251 Lr in contrast to 255 Lr where the 1/2 ⁻ level is the lowest. Also, the α decay of 253 Lr was studied in more detail and a new α line at 8660(20) keV was found and a new half-life value of 2.46(32) s for an isomeric state in 253 Lr was measured. The 251, 253, 255 Lr Q α values were compared with predictions of various mass models. The relative energies of the 1/2 ⁻ [521] and 7/2 ⁻ [514] single-proton Nilsson states in 251, 253, 255 Lr isotopes were compared with results of the cranking shell model with pairing treated using the particle-number-conserving method. The level separation and, in particular, the level order change between 251 Lr and 255 Lr was reproduced only when the hexacontetrapole deformation ϵ 6 was included in the calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2011

Experimental studies of adiabatic flow boiling in fractal-like branching microchannels

Experimental results of adiabatic boiling of water flowing through a fractal-like branching microchannel network are presented and compared to numerical model simulations. The goal is to assess the ability of current pressure loss models applied to a bifurcating flow geometry. The fractal-like branching channel network is based on channel length and width ratios between adjacent branching levels of 2{sup -1/2}. There are four branching sections for a total flow length of 18 mm, a channel height of 150 {mu}m and a terminal channel width of 100 {mu}m. The channels were Deep Reactive Ion Etched (DRIE) into a silicon disk. A Pyrex disk was anodically bonded to the silicon to form the channel top to allow visualization of the flow within the channels. The flow rates ranged from 100 to 225 g/min and the inlet subcooling levels varied from 0.5 to 6 C. Pressure drop along the flow network and time averaged void fraction in each branching level were measured for each of the test conditions. The measured pressure drop ranged from 20 to 90 kPa, and the measured void fraction ranged from 0.3 to 0.9. The measured pressure drop results agree well with separated flow model predictions accounting for the varying flow geometry. The measured void fraction results followed the same trends as the model; however, the scatter in the experimental results is rather large. (author)

42 ENGINEERING↗
DOE OSTI2015

Feasibility of RACT for 3D dose measurement and range verification in a water phantom

Purpose: The objective of this study is to establish the feasibility of using radiation-induced acoustics to measure the range and Bragg peak dose from a pulsed proton beam. Simulation studies implementing a prototype scanner design based on computed tomographic methods were performed to investigate the sensitivity to proton range and integral dose. Methods: Derived from thermodynamic wave equation, the pressure signals generated from the dose deposited from a pulsed proton beam with a 1 cm lateral beam width and a range of 16, 20, and 27 cm in water using Monte Carlo methods were simulated. The resulting dosimetric images were reconstructed implementing a 3D filtered backprojection algorithm and the pressure signals acquired from a 71-transducer array with a cylindrical geometry (30 × 40 cm) rotated over 2π about its central axis. Dependencies on the detector bandwidth and proton beam pulse width were performed, after which, different noise levels were added to the detector signals (using 1 μs pulse width and a 0.5 MHz cutoff frequency/hydrophone) to investigate the statistical and systematic errors in the proton range (at 20 cm) and Bragg peak dose (of 1 cGy). Results: The reconstructed radioacoustic computed tomographic image intensity was shown to be linearly correlated to the dose within the Bragg peak. And, based on noise dependent studies, a detector sensitivity of 38 mPa was necessary to determine the proton range to within 1.0 mm (full-width at half-maximum) (systematic error < 150 μm) for a 1 cGy Bragg peak dose, where the integral dose within the Bragg peak was measured to within 2%. For existing hydrophone detector sensitivities, a Bragg peak dose of 1.6 cGy is possible. Conclusions: This study demonstrates that computed tomographic scanner based on ionizing radiation-induced acoustics can be used to verify dose distribution and proton range with centi-Gray sensitivity. Realizing this technology into the clinic has the potential to significantly impact beam commissioning, treatment verification during particle beam therapy and image guided techniques.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Origin of the $ν$ = 1/2 fractional quantum Hall effect in wide quantum wells

The nature of the fractional quantum Hall effect at ν = 1/2, observed in wide quantum wells al- most three decades ago, is still under debate. Previous studies have investigated it by the variational Monte Carlo method, which assumes that the transverse wave function and the gap between the symmetric and antisymmetric subbands obtained in a local density approximation at zero magnetic field remain valid even at high perpendicular magnetic fields; this method also ignores the effect of Landau level mixing. We develop in this work a three-dimensional fixed phase diffusion Monte Carlo method, which gives, in a single framework, the total energies of various candidate states in a finite width quantum well, including Landau level mixing, directly in a large magnetic field. This method can be applied to one-component states, and also to two-component states in the limit where the symmetric and antisymmetric bands are nearly degenerate. Our three-dimensional fixed-phase diffusion Monte Carlo calculations find that the one-component composite-fermion Fermi sea and the one-component Pfaffian states are very close in energy for a range of quantum well widths and densities, suggesting that the observed 1/2 fractional quantum Hall state in wide quantum wells is likely to be the one-component Pfaffian state. Furthermore, we hope that this will motivate further experimental studies of this state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1965

5KW pulse width modulated static inverter

Design verification tests for logic and low level circuits, and preliminary single-phase breadboard of pulse width modulated static inverter

PULSE WIDTH MODULATION /PWM/↗
DOE OSTI2014

Non-adiabatic processes in the charge transfer reaction of O{sub 2} molecules with potassium surfaces without dissociation

Thin potassium films grown on Si(001) substrates are used to measure internal chemicurrents and the external emission of exoelectrons simultaneously during adsorption of molecular oxygen on K surfaces at 120 K. The experiments clarify the dynamics of electronic excitations at a simple metal with a narrow valence band. X-ray photoemission reveals that for exposures below 5 L almost exclusively peroxide K{sub 2}O{sub 2} is formed, i.e., no dissociation of the molecule occurs during interaction. Still a significant chemicurrent and a delayed exoelectron emission are detected due to a rapid injection of unoccupied molecular levels below the Fermi level. Since the valence band width of potassium is approximately equal to the potassium work function (2.4 eV) the underlying mechanism of exoemission is an Auger relaxation whereas chemicurrents are detected after resonant charge transfer from the metal valence band into the injected level. The change of the chemicurrent and exoemission efficiencies with oxygen coverage can be deduced from the kinetics of the reaction and the recorded internal and external emission currents traces. It is shown that the non-adiabaticity of the reaction increases with coverage due to a reduction of the electronic density of states at the surface while the work function does not vary significantly. Therefore, the peroxide formation is one of the first reaction systems which exhibits varying non-adiabaticity and efficiencies during the reaction. Non-adiabatic calculations based on model Hamiltonians and density functional theory support the picture of chemicurrent generation and explain the rapid injection of hot hole states by an intramolecular motion, i.e., the expansion of the oxygen molecule on the timescale of a quarter of a vibrational period.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗