Correlating Interfacial Charge Transfer Rates with Interfacial Molecular Structure in the Tetraphenyldibenzoperiflanthene/C 70 Organic Photovoltaic System
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Engineering Papers
Results for “Kinetic phase transition”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Coupling solidification kinetics with phase-behavior computations in hydrodynamic simulations of high-pressure, dynamic-compression processes
In this study, we report a numerical scheme to integrate models for the kinetics of solidification processes together with phase-behavior computations in the context of continuum-scale hydrodynamic simulations. The objective of the phase-behavior computations is to determine the pressure and temperature, given the following three sets of inputs: (1) an appropriate equation of state to describe our system, (2) the phase fraction(s) produced by the kinetic models, (3) and the volume and internal energy obtained by solving the conservation equations that govern the hydrodynamic behavior. The kinetics are assumed to be governed by the Kolmogorov–Johnson–Mehl–Avrami equation, and the nucleation and growth rates that enter into that equation are functions of the pressure and temperature produced by the phase-behavior computations. Our formulation allows for the fluid and solid phases to be at different temperatures (thermal nonequilibrium) and pressures (arising from surface-tension-induced Laplace contributions). The formulation is presented in a fairly general setting that is independent of any particular material, although we demonstrate it in some examples related to high-energy-density science applications where materials are rapidly compressed to pressures exceeding several gigapascals in less than a microsecond. We conclude with a critical evaluation of our approach and provide suggestions for future work to improve the predictive capabilities and generality of the models.
42 ENGINEERING↗
Phase diagram of the three-dimensional subsystem toric code
Subsystem quantum error-correcting codes typically involve measuring a sequence of noncommuting parity check operators. They can sometimes exhibit greater fault tolerance than conventional codes, which use commuting checks. However, unlike subspace codes, it is unclear if subsystem codes—in particular their advantages—can be understood in terms of ground-state properties of a physical Hamiltonian. In this paper, we address this question for the three-dimensional subsystem toric code (3D STC), as recently constructed by Kubica and Vasmer [], which exhibits single-shot error correction. Motivated by a conjectured relation between single-shot properties and thermal stability, we study the zero- and finite-temperature phases of an associated noncommuting Hamiltonian. By mapping the Hamiltonian model to a pair of 3D Z 2 gauge theories coupled by a kinetic constraint, we find various phases at zero temperature, all separated by first-order transitions: There are 3D toric code-like phases with deconfined point-like excitations in the bulk, and there are phases with a confined bulk supporting a 2D toric code on the surface when appropriate boundary conditions are chosen. The latter is similar to the surface topological order present in 3D STC. However, the similarities between the single-shot correction in 3D STC and the confined phases are only partial: they share the same sets of degrees of freedom, but they are governed by different dynamical rules. Instead, we argue that the process of single-shot error correction can more suitably be associated with a path (rather than a point) in the zero-temperature phase diagram, a perspective, which inspires alternative measurement sequences enabling single-shot error correction. Moreover, since none of the above-mentioned phases survives at nonzero temperature, the single-shot error-correction property of the code does not imply thermal stability of the associated Hamiltonian phase. Published by the American Physical Society 2024
Li, Yaodong (ORCID:0000000337421944)↗
Model ion abundances for Comet Halley
A computer model for comet comae was applied to predict ion abundances for comet Halley, assuming that the volatile component of the nucleus is 85% water and that the remaining volatile molecules are composed of carbon, nitrogen, oxygen, and sulfur. Model parameters such as heliocentric distance, size, and albedo are chosen to be consistent with the 13 to 14 March 1986 encounter of Giotto with the comet. Photoprocesses, gas-phase chemical kinetics, coma energy balance including a separate electron temperature, multifluid hydrodynamics with a transition to free molecular flow, fast streaming atomic and molecular hydrogen, and counter and cross streaming of species in the coma-solar wind interaction are taken into consideration. A comparison of the model results with data from the ion mass spectrometer at 6000 and 1500 km from the nucleus shows good agreement. Implications of the coma physics and chemistry are discussed.
Huebner, W. F.↗
Overview of NASA's Microgravity Materials Research Program
The NASA microgravity materials program is dedicated to conducting microgravity experiments and related modeling efforts that will help us understand the processes associated with the formation of materials. This knowledge will help improve ground based industrial production of such materials. The currently funded investigations include research on the distribution of dopants and formation of defects in semiconductors, transitions between columnar and dendritic grain morphology, coarsening of phase boundaries, competition between thermally and kinetically favored phases, and the formation of glassy vs. crystalline material. NASA microgravity materials science investigators are selected for funding either through a proposal in response to a NASA Research Announcement or by participation in a team proposing to a foreign agency research announcement. In the latter case, a US investigator participating in a successful proposal to a foreign agency can then apply to NASA for funding of an unsolicited proposal. The program relies on cooperation with other aerospace partners from around the world. The ISS facilities used for these investigations are provided primarily by partnering with foreign agencies and in most cases the US investigators are working as a part of a larger team studying a specific area of materials science. The following facilities are to be utilized for the initial investigations. The ESA provided Low Gradient Facility and the Solidification and Quench Inserts to the Materials Research Rack/Materials Science Laboratory are to be used primarily for creating bulk samples that are directionally solidified or quenched from a high temperature melt. The CNES provided DECLIC facility is used to observe morphological development in transparent materials. The ESA provided Electro-Magnetic Levitator (EML) is designed to levitate, melt and then cool samples in order to study nucleation behavior. The facility provides conditions in which nucleation of the solid is not triggered from the wall and in which fluid flows in the sample can be controlled and manipulated. These conditions allow scientists ideal conditions for understanding the relative amounts and distribution of different phases that form in the solid. Finally, the Coarsening of Solid Liquid Melts hardware allows quenching of low temperature samples in the Microgravity Science Glovebox.
Downey, James Patton↗
Multiple freezing–melting pathways of high-density ice through ice XXI phase at room temperature
Various metastable ice phases and their complicated transition pathways have been found by pressurization at low temperatures at which slow kinetics and high metastability are easily achieved. By contrast, such diversity is less expected at room or elevated temperatures. Here, using a combination of a dynamic diamond anvil cell and X-ray free electron laser techniques, we demonstrate that supercompressed water transforms into ice VI through multiple freezing–melting pathways at room temperature, hidden within the pressure region of ice VI. These multiple transition pathways occur via a metastable ice (more specifically, ice XXI with body-centred tetragonal structure ($I\bar{4}2d$)) discovered in this study and a metastable ice VII that exists within the pressure range of ice VI. We find that supercompressed water structurally evolves from high-density water to very-high-density water, causing multiple transition pathways. These findings provide an insight to find more metastable ice phases and their transition pathways at elevated temperatures.
Lee, Yun-Hee [Korea Research Institute of Standard↗
Studies of clusters in the gas phase and application to an understanding of transitions from gaseous to the surface and condensed state
Studies of the structure, stability, electronic properties, and formation kinetics of small clusters were reviewed which provide information useful in furthering understanding of nucleation processes, liquid state properties, and the nature of surfaces. Using mass spectrometric coupled with various high pressure ion clustering and Stark effect-molecular beam techniques, the details of the primary clustering steps leading to the nucleation of bulk liquid from the vapor were and obtained by direct observation results are presented.
Castleman, A. W., Jr.↗
Two-dimensional ring polymer molecular dynamics determination of the MnO + + H 2 /D 2 reaction rates on a Δ-machine learned potential energy surface
In this work, we investigate the impact of nuclear quantum effects in the kinetics of the MnO + + H 2 reaction, a prototypical system for gas-phase H 2 activation by transition metal oxide ions. The DFT based potential energy surfaces (PESs) for the lowest-lying quintet and septet spin states reported in our previous work are improved by 2953 newly calculated CCSD(T)/AVDZ points using a delta-machine learning (Δ-ML) method. To examine nuclear quantum effects, the rate coefficients are computed using ring-polymer molecular dynamics (RPMD). Due to the mechanistic complexity of the reaction, two reaction coordinates are necessary to map out the free-energy surface and an extended RPMD rate theory is developed. The calculated RPMD rate coefficients on the new PES are in better agreement with experimental data. The calculated kinetic isotope effects (KIEs) range from 1.6 to 1.8, also in good agreement with the experimental values. Additionally, the converged RPMD rate coefficients are 2.3 to 3.1 times higher than their classical counterparts across the studied temperature range, suggesting the presence of moderate nuclear quantum effects in this reaction.
Liu, Yang [University of New Mexico, Albuquerque, ↗
Aspects of reheating in first-order inflation
Studied here is reheating in theories where inflation is completed by a first-order phase transition. In the scenarios, the Universe decays from its false vacuum state by bubble nucleation. In the first stage of reheating, vacuum energy is converted into kinetic energy for the bubble walls. To help understand this phase, researchers derive a simple expression for the equation of state of a universe filled with expanding bubbles. Eventually, the bubble walls collide. Researchers present numerical simulations of two-bubble collisions clarifying and extending previous work by Hawking, Moss, and Stewart. The researchers' results indicate that wall energy is efficiently converted into coherent scalar waves. Also discussed is particle production due to quantum effects. These effects lead to the decay of the coherent scalar waves. They also lead to direct particle production during bubble-wall collisions. Researchers calculate particle production for colliding walls in both sine-Gordon and theta (4) theories and show that it is far more efficient in the theta (4) case. The relevance of this work for recently proposed models of first order inflation is discussed.
Watkins, Richard↗
Insights into Ti doping for stabilizing the Na 2/3 Fe 1/3 Mn 2/3 O 2 cathode in sodium ion battery
Iron- and manganese-based layered metal oxides, as cathodes for sodium ion batteries, have received widespread attention because of the low cost and high specific capacity. However, the Jahn-teller effect of Mn 3+ ions and the resulted unstable structure usually lead to continuously capacity decay. Herein, Titanium (Ti) has been successfully doped into Na 2/3 Fe 1/3 Mn 2/3 O 2 to suppress the Jahn-Teller distortion and improve both cycling and rate performance of sodium ion batteries. In situ high-energy synchrotron X-ray diffraction study shows that Ti-doped compound (Na 2/3 Fe 1/3 Mn 0.57 Ti 0.1 O 2 ) can maintain the single P2 phase without any phase transition during the whole charging/discharging process. Further, various electrochemical characterizations are also applied to explore the better kinetics of sodium ions transfer in the Na 2/3 Fe 1/3 Mn 0.57 Ti 0.1 O 2 . This work provides a comprehensive insight into the Ti-doping effects on the performance from both structural and electrokinetic perspectives.
25 ENERGY STORAGE↗
A predictive mirror twin Higgs with small Z2 breaking
The twin Higgs mechanism is a solution to the little hierarchy problem in which the top partner is neutral under the Standard Model (SM) gauge group. The simplest mirror twin Higgs (MTH) model — where a Z 2 symmetry copies each SM particle — has too many relativistic degrees of freedom to be consistent with cosmological observations. We demonstrate that MTH models can have an observationally viable cosmology if the twin mass spectrum leads to twin neutrino decoupling before the SM and twin QCD phase transitions. Our solution requires the twin photon to have a mass of ~20 MeV and kinetically mix with the SM photon to mediate entropy transfer from the twin sector to the SM. This twin photon can be robustly discovered or excluded by future experiments. Additionally, the residual twin degrees of freedom present in the early Universe in this scenario would be detectable by future observations of the cosmic microwave background.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Analysis of Transition-Sensitized Turbulent Transport Equations
The dynamics of an ensemble of linear disturbances in boundary-layer flows at various Reynolds numbers is studied through an analysis of the transport equations for the mean disturbance kinetic energy and energy dissipation rate. Effects of adverse and favorable pressure-gradients on the disturbance dynamics are also included in the analysis Unlike the fully turbulent regime where nonlinear phase scrambling of the fluctuations affects the flow field even in proximity to the wall, the early stage transition regime fluctuations studied here are influenced cross the boundary layer by the solid boundary. The dominating dynamics in the disturbance kinetic energy and dissipation rate equations are described. These results are then used to formulate transition-sensitized turbulent transport equations, which are solved in a two-step process and applied to zero-pressure-gradient flow over a flat plate. Computed results are in good agreement with experimental data.
Rumsey, Christopher L.↗
Predictive Chemical Kinetic Modeling: Where We Succeed, Where We Struggle, and What Comes Next
Chemical kinetic modeling plays a foundational role in fields ranging from energy to environmental science, pharmaceuticals, and advanced materials. The past two decades have seen remarkable progress, particularly in modeling gas-phase reactions for thermochemical processes, leading to impactful industrial applications such as steam cracking and air quality management. However, new challenges are emerging. The successful development of systematic methodologies for the description of gas-phase kinetics opens the possibility to apply the same approach to the study of more challenging systems. Here, we review recent advances, including ab initio transition state theory-based master equation estimation of elementary rates, automated mechanism generation, machine-learning-assisted kinetics, and uncertainty quantification, and discuss the advances needed to apply the same methodological approach in areas such as heterogeneous catalysis, electrochemistry, liquid-phase and solid-state reactivity, and multiscale model integration. We advocate for the development of targeted tools, especially methods that go beyond empirical tuning toward first-principles-based predictions. We highlight the need for accessible software and AIaugmented workflows to democratize modeling for industry and academia alike. In this perspective, we call attention to not only what has worked but also what remains unsolved, advocating to avoid overemphasizing successes in scientific works at the expense of realism. The next decade should focus on predictive capability, physical accuracy, and community infrastructure (e.g., databases and services) to enable innovation across diverse fields. We argue that kinetic modeling, properly equipped, can accelerate discovery far beyond its traditional domains.
ab initio calculations↗
Observations of grain-boundary phase transformations in an elemental metal
The theory of grain boundary (the interface between crystallites, GB) structure has a long history 1 and the concept of GBs undergoing phase transformations was proposed 50 years ago 2,3 . The underlying assumption was that multiple stable and metastable states exist for different GB orientations 4,5,6 . The terminology ‘complexion’ was recently proposed to distinguish between interfacial states that differ in any equilibrium thermodynamic property 7 . Different types of complexion and transitions between complexions have been characterized, mostly in binary or multicomponent systems 8,9,10,11,12,13,14,15,16,17,18,19 . Simulations have provided insight into the phase behaviour of interfaces and shown that GB transitions can occur in many material systems 20,21,22,23,24 . However, the direct experimental observation and transformation kinetics of GBs in an elemental metal have remained elusive. In this work we demonstrate atomic-scale GB phase coexistence and transformations at symmetric and asymmetric $[11\bar{1}]$ tilt GBs in elemental copper. Atomic-resolution imaging reveals the coexistence of two different structures at Σ19b GBs (where Σ19 is the density of coincident sites and b is a GB variant), in agreement with evolutionary GB structure search and clustering analysis 21,25,26 . We also use finite-temperature molecular dynamics simulations to explore the coexistence and transformation kinetics of these GB phases. Our results demonstrate how GB phases can be kinetically trapped, enabling atomic-scale room-temperature observations. Our work paves the way for atomic-scale in situ studies of metallic GB phase transformations, which were previously detected only indirectly 9,15,27,28,29 , through their influence on abnormal grain growth, non-Arrhenius-type diffusion or liquid metal embrittlement.
36 MATERIALS SCIENCE↗
Defect‐Induced, Ferroelectric‐Like Switching and Adjustable Dielectric Tunability in Antiferroelectrics
Abstract Antiferroelectrics, which undergo a field‐induced phase transition to ferroelectric order that manifests as double‐hysteresis polarization switching, exhibit great potential for dielectric, electromechanical, and electrothermal applications. Compared to their ferroelectric cousins, however, considerably fewer efforts have been made to understand and control antiferroelectrics. Here, it is demonstrated that the polarization switching behavior of an antiferroelectric can be strongly influenced and effectively regulated by point defects. In films of the canonical antiferroelectric PbZrO 3 , decreasing oxygen pressure during deposition (and thus increasing adatom kinetic energy) causes unexpected “ferroelectric‐like” polarization switching although the films remain in the expected antiferroelectric orthorhombic phase. This “ferroelectric‐like” switching is correlated with the creation of bombardment‐induced point‐defect complexes which pin the antiferroelectric–ferroelectric phase boundaries, and thus effectively delay the phase transition under changing field. The effective pinning energy is extracted via temperature‐dependent switching‐kinetics studies. In turn, by controlling the concentration of defect complexes, the dielectric tunability of the PbZrO 3 can be adjusted, including being able to convert between “positive” and “negative” tunability near zero field. This work reveals the important role and strong capability of defects to engineer antiferroelectrics for new performance and functionalities.
Pan, Hao↗
Modeling Disturbance Dynamics in Transitional and Turbulent Boundary Layers
The dynamics of an ensemble of linear disturbances in boundary-layer flows at various Reynolds numbers is studied through an analysis of the transport equations for the mean disturbance kinetic energy and energy dissipation rate. Effects of adverse and favorable pressure-gradients on the disturbance dynamics are also included in the analysis. Unlike the fully turbulent regime where nonlinear phase scrambling of the fluctuations affects the flow field even in proximity to the wall, the early stage transition regime fluctuations studied here are influenced across the boundary layer by the solid boundary. In addition, the dominating dynamics in the disturbance kinetic energy equation is governed by the energy production, pressure-transport and viscous diffusion - also in contrast to the fully turbulent regime. For the disturbance dissipation rate, a dynamic balance exists between the destruction and diffusion of dissipation.
Grosch, C. E.↗
Reduced-order condensed-phase kinetic models for polyethylene, polypropylene and polystyrene thermochemical recycling
Thermochemical recycling of plastic waste (PW) into chemicals and energy vectors requires coupling particle and reactor-scale simulations to accurate condensed phase pyrolysis mechanisms for each constituent. This work proposes a methodology to derive reduced-order condensed-phase kinetic models from validated semi-detailed kinetic mechanisms. Two types of kinetic models are obtained for polyethylene (PE), polypropylene (PP) and polystyrene (PS): reduced semi-detailed models and multi-step fully lumped ones. These families offer different compromises between accuracy and computational cost. The former employ 50–100 gas + liquid species and describe both the radical degradation and the detailed carbon distribution of the products. Conversely, the latter involves 5–10 species per polymer tracking only the main petroleum cuts. The kinetic mechanisms are complemented by the definition of thermochemical properties of gas, liquid, and solid-phase species, accounting for phase-transitions through pseudo-chemical reactions. Model validations are performed by comparison with experimental data and the original semi-detailed mechanisms in terms of mass loss, heat fluxes and product distribution profiles. The resulting CHEMKIN-like condensed-phase models are attached as Supplementary Material and as a GitHub repository. Extending the proposed approach to other polymers and coupling it with existing subsets in the CRECK kinetic framework (e.g., biomass, PVC, PET) offers a powerful tool to model thermochemical recycling of PW and biomass/PW mixtures.
kinetics↗
Synthesis, Processing, and Use of Isotopically Enriched Epitaxial Oxide Thin Films
Isotopic engineering has emerged as a key approach to study the nucleation, diffusion, phase transitions, and reactions of materials at an atomic level. It aims to uncover mass transport pathways, kinetics, and operational and failure mechanisms of functional materials and devices. Understanding these phenomena leads to deeper insights into important physical processes, such as the transport of ions in energy conversion and storage devices and the role of active sites and supports during heterogeneous catalytic reactions. Likewise, isotopic engineering is being pursued as a means of modifying functionality to enable future technological applications. In this Account, we summarize our recent work employing isotope labeling (e.g., 18 O 2 and 57 Fe) during thin film synthesis and postgrowth processing to reveal growth mechanisms, defect chemistry, and elemental diffusion under working and extreme conditions. Isotope-resolved analysis techniques with nanometer-scale spatial resolution, such as time-of-flight secondary ion mass spectrometry and atom probe tomography, facilitate the accurate quantification of isotopic placement and concentration in our well-defined heterostructures with precisely positioned, isotope-enriched layers. By measuring the nanometer-scale redistribution between natural abundance and isotopically enriched oxygen layers during the deposition of Fe 2 O 3 and Cr 2 O 3 by molecular beam epitaxy, we identified intermixing processes driven by surface adatoms occurring both at the film growth surface and within the first few layers below the surface. Further insights into synthesis mechanisms were gained by studying the tungsten oxide thin films grown by evaporating WO 3 powder in the presence of background 18 O 2 , revealing minimal incorporation of background oxygen during the film formation process. Thermal and radiation-enhanced diffusion in epitaxial Fe and Cr oxides were precisely tracked using 18 O and 57 Fe tracer layers incorporated into model epitaxial oxide thin films. This approach has allowed us to access thermal diffusion behavior at lower temperatures than previously measured, revealing a potential changeover in diffusion mechanism. Understanding radiation-enhanced diffusion in model oxides that represent the surface layers on the structural components of nuclear reactors informs our understanding of their corrosion behavior under irradiation. Isotopic labeling can also provide unique insights into the surface exchange reactions and defect chemistry of electrocatalysts. For instance, tracking the change in 18 O concentration at the surface of an epitaxial LaNiO 3 thin film after the electrocatalytic oxygen evolution reaction revealed the participation of lattice oxygen, confirming a hypothesis that had been proposed previously. Lastly, we highlight a new direction wherein we perform in situ processing studies utilizing isotopic tracers in conjunction with model epitaxial thin films within the atom probe tomography instrument. Additionally, this Account illustrates the great potential of isotopic engineering to enable fundamental mechanistic insights into physical processes and engineer functional properties in epitaxial films, heterostructures, and superlattices.
36 MATERIALS SCIENCE↗