Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “K”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Energy Band Gap, Intrinsic Carrier Concentration and Fermi Level of CdTe Bulk Crystal between 304 K and 1067 K

Optical transmission measurements were performed on CdTe bulk single crystal. It was found that when a sliced and polished CdTe wafer was used, a white film started to develop when the sample was heated above 530 K and the sample became opaque. Therefore, a bulk crystal of CdTe was first grown in the window area by physical vapor transport; the optical transmission was then measured and from which the energy band gap was derived between 304 and 1067 K. The band gaps of CdTe can be fit well as a function of temperature using the Varshini expression: Eg (e V) = 1.5860 - 5.9117xl0(exp -4) T(sup 2)/(T + 160). Using the band gap data, the high temperature electron-hole equilibrium was calculated numerically by assuming the Kane's conduction band structure and a heavy-hole parabolic valance band. The calculated intrinsic carrier concentrations agree well with the experimental data reported previously. The calculated intrinsic Fermi levels between 270 and 1200 K were also presented.

Su, Ching-Hua↗
DOE OSTI2023

Measurement of lepton universality parameters in B + → K + ℓ + ℓ – and B 0 → K* 0 ℓ + ℓ – decays

A simultaneous analysis of the B + → K + ℓ + ℓ – and B 0 → K* 0 ℓ + ℓ – decays is performed to test muon-electron universality in two ranges of the square of the dilepton invariant mass, q 2 . The measurement uses a sample of beauty meson decays produced in proton-proton collisions collected with the LHCb detector between 2011 and 2018, corresponding to an integrated luminosity of 9 fb –1 . A sequence of multivariate selections and strict particle identification requirements produce a higher signal purity and a better statistical sensitivity per unit luminosity than previous LHCb lepton universality tests using the same decay modes. Residual backgrounds due to misidentified hadronic decays are studied using data and included in the fit model. Each of the four lepton universality measurements reported is either the first in the given q 2 interval or supersedes previous LHCb measurements. The results are compatible with the predictions of the Standard Model.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2017

DPW-VI Results Using FUN3D with Focus on k-kL-MEAH2015 (k-kL) Turbulence Model

The Common Research Model wing-body configuration is investigated with the k-kL-MEAH2015 turbulence model implemented in FUN3D. This includes results presented at the Sixth Drag Prediction Workshop and additional results generated after the workshop with a nonlinear Quadratic Constitutive Relation (QCR) variant of the same turbulence model. The workshop provided grids are used, and a uniform grid refinement study is performed at the design condition. A large variation between results with and without a reconstruction limiter is exhibited on "medium" grid sizes, indicating that the medium grid size is too coarse for drawing conclusions in comparison with experiment. This variation is reduced with grid refinement. At a fixed angle of attack near design conditions, the QCR variant yielded decreased lift and drag compared with the linear eddy-viscosity model by an amount that was approximately constant with grid refinement. The k-kL-MEAH2015 turbulence model produced wing root junction flow behavior consistent with wind tunnel observations.

Abdol-Hamid, K. S.↗
DOE OSTI2024

A Nanosized {Ni II 18 } Cluster with a ‘Flying Saucer’ Topology Exhibiting Slow Relaxation of Magnetisation Phenomena at Both 15 K and 1.3 K

A high-nuclearity {Ni 18 } complex (1) with a unique ‘flying saucer’ motif has been prepared from the organic chelate, α-methyl-2-pyridine-methanol (mpmH), in conjunction with bridging azido (N 3 - ) and peroxido (O 2 2- ) ligands. Magnetic susceptibility measurements revealed the presence of both ferro- and antiferromagnetic exchange interactions between the metal centres in 1, and the stabilization of spin states with appreciable S values at two different temperature regimes. The end-on bridging azido and alkoxido groups are in all likelihood the ferromagnetic mediators, while the η 3 :η 3 :μ 6 -bridging peroxides most likely promote the antiparallel alignment of the metals’ spin vectors, yielding an overall non-zero spin ground state for the centrosymmetric compound 1. Furthermore, the {Ni 18 } nanosized cluster behaves as a single-molecule magnet, exhibiting magnetic hysteresis at low temperatures and two relaxation processes at 15 K and 1.3 K, a very rare phenomenon in polynuclear magnetic 3d-metal clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nonadiabatically Driven Quantum Interference Effects in the Ultracold K + KRb → Rb + K 2 Chemical Reaction

The K + KRb → Rb + K 2 chemical reaction is the first ultracold atom–diatom chemical reaction for which experimental results have been reported for temperatures below 1 μK more than a decade ago. The reaction occurs through coupling with an excited electronic state that is accessible even in the ultracold limit. A previous quantum dynamics study, excluding nonadiabatic effects, has reported a rate coefficient that is about 35% below the experimental value. Here, we report the first nonadiabatic quantum dynamics study of this reaction and obtain rate coefficients in better agreement with experiments. Our results show that short-range dynamics mediated by coupling with the excited electronic state introduces quantum interference effects that influence both the state-to-state rate coefficients and the overall reaction rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Exploring the impact of ions on oxygen K-edge X-ray absorption spectroscopy in NaCl solution using the GW-Bethe-Salpeter-equation approach

X-ray absorption spectroscopy (XAS) is a powerful experimental tool to probe the local structure in materials with the core hole excitations. Here, the oxygen K-edge XAS spectra of the NaCl solution and pure water are computed by using a recently developed GW-Bethe-Salpeter equation approach, based on configurations modeled by path-integral molecular dynamics with the deep-learning technique. The neural network is trained on ab initio data obtained with strongly constrained and appropriately normed density functional theory. The observed changes in the XAS features of the NaCl solution, compared to those of pure water, are in good agreement between experimental and theoretical results. We provided detailed explanations for these spectral changes that occur when NaCl is solvated in pure water. Specifically, the presence of solvating ion pairs leads to localization of electron-hole excitons. As a result, our theoretical XAS results support the theory that the effects of the solvating ions on the H-bond network are mainly confined within the first hydration shell of ions, however beyond the shell the arrangement of water molecules remains to be comparable to that observed in pure water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Magnetic shape memory alloy Ni45Co5Mn36.6In13.4 measured on ARCS at 300 K and 450 K

These sqw files were generated by combining all of the individual crystal angles scans using the HORACE software package (https://pace-neutrons.github.io/Horace/unstable/user_guide/Getting_started.html). The neutron incident energy for both temperatures was 50 meV. The file labeled 50meV_450K_All.sqw is the 450 K data and the file labeled 50meV_RT_All.sqw is for the 300 K data. The crystal was oriented such that HHL is in the scattering plane.

excitations↗
DOE OSTI2025

Measurement of the structural damping ratio of some common materials at 293 K and 77 K in air

The structural damping ratio of various materials has been measured at 293 K and 77 K through a rod bending excitation setup. The aim was to extract the material-dependent structural damping ratio as a first approach to in-vacuum damping. However, for simplicity, testing has been conducted in air with measures to minimize the effect of viscous damping from viscous drag. The setup and methodology are described in this paper, as well as the setup limitations and proposed ways to overcome these limitations for an improved setup. The results are presented in a summary table and discussed.

43 PARTICLE ACCELERATORS↗
NASA NTRS1973

Crack growth behavior of 2219-T87 aluminum alloy from 20 K (-423 F) to 422 K (300 F)

The aluminum alloy 2219-T87 has great potential for use as a cryogenic material for various manned and unmanned aerospace vehicles. Although its properties are generally known, toughness characteristics in various grain directions when the material is machined from thick plates and subjected to various environments have not been documented. This program, sponsored by the NASA Johnson Space Center, was designed to determine these properties between 20 K (-423 F) and 423 K (300 F).

Witzell, W. E.↗
NASA NTRS1976

Tables and charts of equilibrium thermodynamic properties of carbon dioxide for temperatures from 100 K to 25,000 K

Equilibrium thermodynamic properties for pure carbon dioxide are presented in tabulated and graphical form for temperatures from 100 K to 25,000 K and pressures from 40 mN/sq m to 1 GN/sq m. Properties include pressure, temperature, density, enthalpy, speed of sound, entropy, molecular weight ratio, specific heat at constant pressure, specific heat at constant volume, isentropic exponent, and species mole fractions.

Miller, C. G., III↗
NASA NTRS1982

Thermal expansion of graphite-epoxy between 116 K and 366 K

A Priest laser interferometer was developed to measure the thermal strain of composite laminates. The salient features of this interferometer are that: (1) it operates between 116 K and 366 K; (2) it is easy to operate; (3) minimum specimen preparation is required; (4) coefficients of thermal expansion in the range of 0-5 micro epsilon/K can be measured; and (5) the resolution of thermal strain is on the order of micro epsilon. The thermal response of quasi-isotropic, T300/5208, grahite-epoxy composite material was studied with this interferometer. The study showed that: (1) for the material tested, thermal cycling effects are negligible; (2) variability of thermal response from specimen to specimen may become significant at cryogenic temperatures; and (3) the thermal response of 0.6 cm and 2.5 cm wide specimens are the same above room temperature.

Short, J. S.↗
NASA NTRS1984

Bolometers operated at 0.1 K and 0.2 K cooled by adiabatic demagnetization

The construction of bolometers operating at temperatures of 0.1 K and 0.2 K and cooled by adiabatic demagnetization is reported. The electrical noise-equivalent power (NEP) of the bolometers was found to be 1.8 and 6.6 x 10 to the -16th W/sq rt Hz, respectively. These values are within a factor of two of the expected performance based upon bolometer theory. The thermistor material used was gallium-doped single-crystal germanium, for which a resistivity temperature dependence is found.

Lesyna, L.↗
NASA NTRS2005

Operation of Terahertz Quantum-cascade Lasers at 164 K in Pulsed Mode and at 117 K in Continuous-wave Mode

We report the demonstration of a terahertz quantum-cascade laser that operates up to 164 K in pulsed mode and 117 K in continuous-wave mod e at approximately 3.0 THz. The active region was based on a resonant -phonon depopulation scheme and a metal-metal waveguide was used for modal confinement. Copper to copper thermocompression wafer bonding w as used to fabricate the waveguide, which displayed improved thermal properties compared to a previous indium-gold bonding method.

Williams, Benjamin S.↗
DOE OSTI2022

Cross-correlation of Dark Energy Survey Year 3 lensing data with ACT and P l a n c k thermal Sunyaev-Zel’dovich effect observations. II. Modeling and constraints on halo pressure profiles

Hot, ionized gas leaves an imprint on the cosmic microwave background via the thermal Sunyaev-Zel’dovich (tSZ) effect. The cross-correlation of gravitational lensing (which traces the projected mass) with the tSZ effect (which traces the projected gas pressure) is a powerful probe of the thermal state of ionized baryons throughout the Universe and is sensitive to effects such as baryonic feedback. In a companion paper (Gatti et al. Phys. Rev. D 105, 123525 (2022)), we present tomographic measurements and validation tests of the cross-correlation between Galaxy shear measurements from the first three years of observations of the Dark Energy Survey and tSZ measurements from a combination of Atacama Cosmology Telescope and Planck observations. In this work, we use the same measurements to constrain models for the pressure profiles of halos across a wide range of halo mass and redshift. We find evidence for reduced pressure in low-mass halos, consistent with predictions for the effects of feedback from active Galactic nuclei. We infer the hydrostatic mass bias (B ≡ M 500c /M SZ from our measurements, finding B = 1.8 ± 0.1 when adopting the Planck-preferred cosmological parameters. We additionally find that our measurements are consistent with a nonzero redshift evolution of B, with the correct sign and sufficient magnitude to explain the mass bias necessary to reconcile cluster count measurements with the Planck-preferred cosmology. Our analysis introduces a model for the impact of intrinsic alignments (IAs) of galaxy shapes on the shear-tSZ correlation. We show that IA can have a significant impact on these correlations at current noise levels.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

BICEP/ K e c k XIV: Improved constraints on axionlike polarization oscillations in the cosmic microwave background

We present an improved search for axionlike polarization oscillations in the cosmic microwave background (CMB) with observations from the Keck Array . An all-sky, temporally sinusoidal rotation of CMB polarization, equivalent to a time-variable cosmic birefringence, is an observable manifestation of a local axion field and potentially allows a CMB polarimeter to detect axionlike dark matter directly. We describe improvements to the method presented in previous work, and we demonstrate the updated method with an expanded dataset consisting of the 2012–2015 observing seasons. We set limits on the axion-photon coupling constant for mass m in the range 10 - 23 – 10 - 18 eV , which corresponds to oscillation periods on the order of hours to years. Our results are consistent with the background model. For periods between 1 and 30 d ( 1.6 × 10 - 21 ≤ m ≤ 4.8 × 10 - 20 eV ), the 95%-confidence upper limits on rotation amplitude are approximately constant with a median of 0.27°, which constrains the axion-photon coupling constant to g φ γ < ( 4.5 × 10 - 12 GeV - 1 ) m / ( 10 - 21 eV ) , if axionlike particles constitute all of the dark matter. More than half of the collected BICEP dataset has yet to be analyzed, and several current and future CMB polarimetry experiments can apply the methods presented here to achieve comparable or superior constraints. In the coming years, oscillation measurements can achieve the sensitivity to rule out unexplored regions of the axion parameter space.

79 ASTRONOMY AND ASTROPHYSICS↗