Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Information modeling.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

From BERTopic to SysML: Informing Model-Based Failure Analysis With Natural Language Processing for Complex Aerospace Systems

The development of emerging complex aerospace systems will require new approaches for capturing safety incident scenarios as early as possible in the design phase. However, for novel systems, relevant data available is limited. In this work, we propose a framework informing model-based mission assurance activities with historical incident reports, lessons learned, or other relevant engineering documents using natural language processing. In doing so, we investigate whether there is useful information in data sets that are relevant, if not identical, to the system under design and whether, through rigorous systems engineering practice, this information can be effectively leveraged through model-based failure analysis. In a worked case study, we apply state-of-the-art topic modeling techniques to two data sets, a mission relevant data set and a system relevant data set. The sets of topics are merged and interpreted to form a preliminary list of failure topics that can be used to inform the identification of off-nominal modes in the model-based failure modes and effects analysis development. Once data from the system in operation is available, it can be used to update the topics identified. By extracting information about likely failures from relevant historical data sets and utilizing model-based mission assurance to ensure relevance and rigor, unanticipated failures can be reduced, and projects can more effectively learn from past missions.

Failure Analysis↗

Pulsar observations and neutron star models

Information about the physical parameters of neutron stars is obtained from pulsar observations. The energy balance of the Crab nebula and the Vela X remnant allows derivation of limits for the masses of the Crab and Vela pulsars. Glitch observations provide further clues on the masses of these two pulsars. The degree of confidence in the derived numbers is pointed out. The possibility of observing neutron stars in binary systems as pulsating X-ray sources is discussed. The importance of observing redshifted gamma ray lines from the surface of neutron stars, and thus directly measuring either individual or statistical properties of these objects is pointed out.

Boerner, G.↗

Pulsar observations and neutron star models

Information about the physical parameters of neutron stars is obtained from pulsar observations. The energy balance of the Crab Nebula and the Vela X remnant allows one to derive limits for the masses of the Crab and Vela pulsars. Glitch observations provide further clues on the masses of these two pulsars. The degree of confidence with which one should believe the derived numbers is pointed out. The possibility of observing neutron stars in binary systems as pulsating X-ray sources is discussed. Finally, the importance of observing redshifted gamma ray lines from the surface of neutron stars, and thus directly measuring either individual or statistical properties of these objects, is pointed out.

Boerner, G.↗

Are windshear training aid recommendations appropriate for other than large jet transports? Pilot procedures: Shear models

Information is given in vugraph form on pilot procedures in windshear, typical winds in a downburst, a downburst encounter at takeoff by a large jet transport and a light turboprop twin, and a comparison of pitch algorithms in an approach encounter with downburst shear. It is observed that the light turboprop appears no less tolerant of a downburst encounter than the large jet.

Bray, R. S.↗

Hierarchically Informed Engineering Models for Predictive Modeling of Turbulent Premixed Flame Propagation in Pre- chamber Turbulent Jet Ignition

The goal of the project is to improve the predictive accuracy and efficiency of turbulent combustion sub-models for pre-chamber turbulent jet ignition (TJI). This goal is achieved through the development of a hierarchically informed engineering model for turbulent combustion in TJI. The model development starts with the highest level of model description of turbulent combustion with direct numerical simulation (DNS) from which fundamental characteristics and scaling properties of turbulent premixed flame propagation under TJI relevant conditions are obtained.

42 ENGINEERING↗

Idaho Wildfires II: Assessing the Relationship Between Drought Indicators and Wildfire Risk to Enhance Hazard Modeling and Inform Mitigation Planning

The western United States has experienced twenty years of increased and prolonged drought which have exacerbated wildfire hazards. These jeopardize population centers through increased risks to ecosystem services, local economies, and livelihoods. The Idaho Office of Emergency Management, Water Resources, and Department of Lands are seeking methods to dynamically monitor these conditions and update models that inform hazard mitigation planning and resource allocation. Towards this, these agencies partnered with NASA DEVELOP to produce drought-enhanced wildfire hazard models. Part of a two-term project, the two teams revised the state’s static wildfire hazard model with refined data layers and remotely-sensed data to reflect dynamic ecosystem responses to drought conditions and wildfire potential. Our team distinguished between rangeland and forestland ecosystems, and investigated relationships between drought metrics and vegetation condition using TerrSet Earth Trends Modeler. This analysis determined that total precipitation at a 5-month lag interval (r 2 = 0.72) along with the Evaporative Stress Index (r 2 = 0.69); and precipitation at a 5-month interval (r 2 = 0.42) were important drivers in rangeland and forestland, respectively. These driver variables were incorporated into a temporally dynamic wildfire hazard map. Our team used linear regression to correlate hazard ratings with wildfire frequency. For the year 2020, neither the enhanced hazard model (p < 0.10, r 2 = 0.01) nor the state’s static model (p < 0.05, r 2 = 0.03) were strongly correlated with actual wildfire frequency as they expressed an inverse relationship between wildfire hazard and frequency. This suggests wildfire occurrence is complex and not necessarily driven by the variables used.

Wildfire↗

BERT-Based Topic Modeling and Information Retrieval to Support Fishbone Diagramming for Safe Integration of Unmanned Aircraft Systems in Wildfire Response

Recent concepts for emerging wildfire response operations have included unmanned aircraft systems (UAS) due to their increasing accessibility and capabilities. To integrate UAS into wildfire response safely, researchers have studied the use of large repositories of historic incident reports to improve the scope of root cause analysis. Recent work has emphasized applying state-of-the-art natural language processing techniques to extract useful information from these repositories. However, it has not yet been studied how these results can be interpreted and integrated into the systems engineering process. In this work, we propose a process in which Bidirectional Encoder Representations from Transformers (BERT)-based topic modeling and information retrieval are applied to a relevant set of documents in order to support the development of a fishbone diagram in a semiautomated process. High-level themes in the document set are identified using topic modeling, which are then refined and interpreted by a human analyst. Then, the themes are used to guide a finer search using information retrieval, which returns specific incident reports of relevance. This provides traceability to specific incidents as well as broader categorizations that comprise the fishbone branches. We apply the proposed process to relevant documents from NASA’s Aviation Safety Reporting System (ASRS). The proposed process is widely applicable when relevant documents are available, and the results from this study will be useful to identifying potential causes of wildfire response UAS incidents.

Hazard analysis↗

BERT-based Topic Modeling and Information Retrieval to Support Fishbone Diagramming for Safe Integration of Unmanned Aircraft Systems in Wildfire Response

Recent concepts for emerging wildfire response operations have included unmanned aircraft systems (UAS) due to their increasing accessibility and capabilities. To integrate UAS into wildfire response safely, researchers have studied the use of large repositories of historic incident reports to improve the scope of root cause analysis. Recent work has emphasized applying state-of-the-art natural language processing techniques to extract useful information from these repositories. However, it has not yet been studied how these results can be interpreted and integrated into the systems engineering process. In this work, we propose a process in which Bidirectional Encoder Representations from Transformers (BERT)-based topic modeling and information retrieval are applied to a relevant set of documents in order to support the development of a fishbone diagram in a semiautomated process. High-level themes in the document set are identified using topic modeling, which are then refined and interpreted by a human analyst. Then, the themes are used to guide a finer search using information retrieval, which returns specific incident reports of relevance. This provides traceability to specific incidents as well as broader categorizations that comprise the fishbone branches. We apply the proposed process to relevant documents from NASA’s Aviation Safety Reporting System (ASRS). The proposed process is widely applicable when relevant documents are available, and the results from this study will be useful to identifying potential causes of wildfire response UAS incidents.

hazard analysis↗

BERT-based Topic Modeling and Information Retrieval to Support Fishbone Diagramming for Safe Integration of Unmanned Aircraft Systems in Wildfire Response

Recent concepts for emerging wildfire response operations have included unmanned aircraft systems (UAS) due to their increasing accessibility and capabilities. To integrate UAS into wildfire response safely, researchers have studied the use of large repositories of historic incident reports to improve the scope of root cause analysis. Recent work has emphasized applying state-of-the-art natural language processing techniques to extract useful information from these repositories. However, it has not yet been studied how these results can be interpreted and integrated into the systems engineering process. In this work, we propose a process in which Bidirectional Encoder Representations from Transformers (BERT)-based topic modeling and information retrieval are applied to a relevant set of documents in order to support the development of a fishbone diagram in a semiautomated process. High-level themes in the document set are identified using topic modeling, which are then refined and interpreted by a human analyst. Then, the themes are used to guide a finer search using information retrieval, which returns specific incident reports of relevance. This provides traceability to specific incidents as well as broader categorizations that comprise the fishbone branches. We apply the proposed process to relevant documents from NASA’s Aviation Safety Reporting System (ASRS). The proposed process is widely applicable when relevant documents are available, and the results from this study will be useful to identifying potential causes of wildfire response UAS incidents.

hazard analysis↗

A biophysical approach to the performance diagnosis of human–building energy interaction: Information (bits) modeling, algorithm, and indicators of energy flow complexity

Highlights: • Energy-related human-building interaction is analyzed at the biophysical system scale. • Energy flow-networking model of environmental building performance is suggested. • Information is suggested as a holistic building performance metric. - Abstract: This article addresses the utmost upstream impacts of human–building energy interaction by proposing a network-based model, algorithms, and indicators. Hypothesizing that human behavior is a key factor for the symbiotic development of building and the geobiosphere system, the author seeks emergy (spelled with an “m”)-information integrated measures to indicate dynamic system-level performance of the interaction with building energy flow topology. To validate the hypothesis and methods, four representative building cases were tested on the building form (envelope) of (i) a building with no occupant intervention (baseline), (ii) a building controlled by responsive human behavior (bioclimatic adaptation), (iii) a building with reinforced insulation and behavior-dominated control (passive design), and (iv) a net-zero energy building (NZEB). The results demonstrate that adaptive human behavior in building operation increases the information content and complexity of energy-flow networking, improving performance and sustainability. Findings also reveal that increasing information, complexity, and power (energy availability over time) parallel the general energetic features of developing biophysical systems (greater feedback, internalization, and recycling of materials and energies). It becames clear that active behavioral response is a dominant agent of sustainable environments even on a far broader system scale.

54 ENVIRONMENTAL SCIENCES↗

Partitioning in trees and soil (PiTS) - a experimental approach to improve knowledge of forest carbon dynamics

Summary The dynamics of rapid changes in carbon (C) partitioning within forest ecosystems are not well understood, which limits improvement of mechanistic models of C cycling. Our objective was to inform model processes by describing relationships between C partitioning and accessible environmental or physiological measurements, with a special emphasis on belowground C flux. We exposed eight 7-year-old loblolly pine trees to air enriched with 13CO2 and then implemented adjacent light shade (LS) and heavy shade (HS) treatments in order to manipulate C uptake and flux. A soil pit was dug adjacent to the trees to provide greater access belowground. The impacts of shading on photosynthesis, plant water potential, sap flow, basal area growth, root growth, and soil C exchange rate (CER) were assessed for each tree over a three-week period. The progression of the 13C label was concurrently tracked from the atmosphere through foliage, phloem, roots, and soil CO2 efflux. The HS treatment significantly reduced C uptake, sap flow, stem growth and root standing crop, and resulted in greater residual soil water content to 1 m depth. Sap flow was strongly correlated with CER on the previous day, but not the current day, with no apparent treatment effect on the relationship. The 13C label was immediately detected in foliage on label day (half-life = 0.5 d), progressed through phloem by day 2 (half-life = 4.7 d), roots by day 2-4, and subsequently was evident as respiratory release from soil which peaked between days 3-6. The 13C of soil CO2 efflux was strongly correlated with phloem 13C on the previous day, or two days earlier. These data detail the timing and relative magnitude of C flux through a young pine stand in relation to environmental conditions. Refinement of belowground sampling will be necessary to adequately separate and quantify the flux of recently fixed C into roots, and fate of that new C as respiratory, mycorrhizal or exudative release, storage or partitioning into new root biomass.

09 BIOMASS FUELS↗

Integration of Information Management System, Workflow and Computational Tools Enabling Multiscale Modeling Within an ICME Paradigm

With the increased emphasis on reducing the cost and time to market of new materials, the need for analytical tools that enable the virtual design and optimization of materials throughout their processing - internal structure - property - performance envelope, along with the capturing and storing of the associated material and model information across its lifecycle, has become critical. This need is also fueled by the demands for higher efficiency in material testing; consistency, quality and traceability of data; product design; engineering analysis; as well as control of access to proprietary or sensitive information. Fortunately, material information management systems and physics-based multiscale modeling methods have kept pace with the growing user demands. Herein, recent efforts to develop a set of Python functions that exchange information between NASA GRC's Integrated multiscale Micromechanics Analysis Code (ImMAC) software toolset and its Integrated Computational Materials Engineering (ICME), Granta MI® database schema is presented. The goal is to enable seamless coupling between both test data and simulation data, which is captured and tracked automatically within Granta MI®, with full model pedigree information. These tools, and this type of linkage, are foundational to realizing the full potential of ICME, in which materials processing, microstructure, properties, and performance are coupled to enable application-driven design and optimization of materials and structures.

multiscale modeling; Micromechanics; Computational↗

Understanding Model Inadequacy in TRISO Nuclear Fuel Fission Products Release Models: Empirical and Mechanistic Approaches

The increasing use of tristructural isotropic (TRISO) particle fuel in both advanced and existing reactors necessitates a thorough evaluation of uncertainties and shortcomings in TRISO fission product release models. These inadequacies arise from the simplifications made in computational models compared to experimental data. Utilizing the BISON fuel performance code and experimental data from the Advanced Gas Reactor (AGR) program provides a unique chance to rigorously assess these inadequacies within a Bayesian uncertainty quantification (UQ) framework. This study contrasts the standard Bayesian framework with the Kennedy-O'Hagan (KOH) framework, which explicitly accounts for modeling inadequacies, in the context of UQ for TRISO silver release models. It examines both the traditional Arrhenius equation and a more advanced lower-length-scale (LLS)-informed model that incorporates microstructure information. The inverse UQ process applied to AGR-2 and AGR-3/4 datasets identified modeling inadequacy as the primary source of uncertainty, with experimental noise also being significant, while model parameter uncertainty was minimal. Both the Arrhenius and LLS-informed models showed similar levels of modeling inadequacy. For forward predictive UQ using the AGR-1 dataset, the KOH framework enhanced the accuracy and quality of quantified uncertainties by approximately 30% and 40%, respectively, compared to the standard Bayesian framework. This improvement was observed for both the Arrhenius and LLS-informed models. At the engineering scale, both models performed similarly, but the LLS-informed model outperformed the Arrhenius equation at the mesoscale. These findings underscore the importance of explicitly considering modeling inadequacy in the UQ process and highlight the need for ongoing refinement of physics-based models to address these shortcomings.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Unpacking model inadequacy: The quantification of silver release from TRISO fuel by considering empirical and mechanistic approaches

Increasing adoption of the proposed tristructural isotropic (TRISO) particle fuel for both advanced and existing reactors makes it critical to assess and address any uncertainties and inadequacies of TRISO fission product release models. Model inadequacy stems from simplifications made to the computational model when compared to the experiments. The modeling and simulation efforts conducted using the BISON fuel performance code, along with the experimental campaigns carried out under the Advanced Gas Reactor Fuel Development and Qualification Program, afford a unique opportunity to conduct a rigorous modeling inadequacy assessment within the Bayesian uncertainty quantification (UQ) framework. Here, this study compares the standard Bayesian framework against the Kennedy-O'Hagan (KOH) framework, which explicitly represents modeling inadequacy, in regard to UQ for TRISO silver release models. For this purpose, both the traditional Arrhenius equation fitted to experimental data and the more advanced lower-length-scale (LLS)-informed model, which considers microstructure information, are independently considered. Applying the inverse UQ process on the AGR-2 and -3/4 datasets revealed modeling inadequacy to be the most dominant source of uncertainty. Experimental noise uncertainty is also significant; however, model parameter uncertainty can be considered negligible. Interestingly, both the Arrhenius equation and the LLS-informed model demonstrated similar levels of modeling inadequacy. For the forward predictive UQ, the KOH framework improved both the accuracy and quality of quantified uncertainties in comparison to the standard Bayesian framework. This is true for both the Arrhenius equation and the LLS-informed model. In comparing these modeling approaches, both demonstrated similar performance at the engineering scale, while the LLS-informed model expectedly outperformed the Arrhenius equation at the mesoscale. These conclusions highlight the importance of explicitly accounting for modeling inadequacy in the UQ process, and reinforce the need for continuous refinement of physics-based models in order to address the modeling inadequacy.

Advanced reactors↗

Presenting Model-Based Systems Engineering Information to Non-Modelers

NASA’s Human Research Program’s (HRP) Exploration Medical Capability (ExMC) Element adopted Systems Engineering (SE) principles and Model Based Systems Engineering (MBSE) tools to capture the system functions, system architecture, requirements, interfaces, and clinical capabilities for a future exploration medical system. There are many different stakeholders who may use the information in the model: systems engineers, clinicians (physicians, nurses, and pharmacists), scientists, and program managers. Many of these individuals do not have access to MBSE modeling tools or have never used these tools. Many of these individuals (clinicians, scientists, even program managers) may have no experience with SE in general let alone interpreting a systems model. The challenge faced by ExMC was how to present the content in the model to non-modelers in a way they could understand with limited to no training in MBSE or the Systems Modeling Language (SysML) without using the modeling tool. Therefore, from the model, ExMC created an HTML report that is accessible to anyone with a browser. When creating the HTML report, the ExMC SE team talked to stakeholders and received their feedback on what content they wanted and how to display this content. Factoring in feedback, the report arranges the content in a way that not only directs readers through the SE process taken to derive the requirements, but also helps them to understand the fundamental steps in an SE approach. The report includes links to source information (i.e., NASA documentation that describes levels of care) and other SE deliverables (e.g., Concept of Operations). These links were provided to aid in the understanding of how the team created this content through methodical SE approach. This paper outlines the process used to develop the model, the data chosen to share with stakeholders, many of the model elements used in the report, the review process stakeholders followed, the comments received from the stakeholders, and the lessons ExMC learned through producing this HTML report.

Jeffrey R. Cohen↗

Presenting Model-Based Systems Engineering Information to Non-Modelers

NASA’s Human Research Program’s (HRP) Exploration Medical Capability (ExMC) Element adopted Systems Engineering (SE) principles and Model Based Systems Engineering (MBSE) tools to capture the system functions, system architecture, requirements, interfaces, and clinical capabilities for a future exploration medical system. There are many different stakeholders who may use the information in the model: systems engineers, requirement engineers, clinicians (doctors, nurses, and pharmacists), scientists, and program managers. Many of these individuals do not have access to MBSE modeling toolsor have never used these tools. Many of these individuals (clinicians, scientists, even program managers)may have no experience with SE in general let alone interpreting a systems model. The challenge faced by ExMC was how to present the content in the model to non-modelers in a way they could understand with limited to no training in MBSE or the Systems Modeling Language (SysML) without using the modeling tool. Therefore, from the model, ExMC created an HTML report that is accessible to anyone with a browser. When creating the HTML report, the ExMC SE team talked to stakeholders and received their feedback on what content they wanted and how to display this content. Factoring in feedback, the report arranges the content in a way that not only directs readers through the SE process taken to derive the requirements, but also helps them to understand the fundamental steps in an SE approach. The report includes links to source information (i.e., NASA documentation that describes levels of care) and other SE deliverables (e.g., Concept of Operations). These links were provided to aid in the understanding of how the team created this content through a methodical SE approach. This paper outlines the process used to develop the model, the data chosen to share with stakeholders, many of the model elements used in the report, the review process stakeholders followed, the comments received from the stakeholders, and the lessons ExMC learned through producing this HTML report.

Jeff Cohen↗