Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ION DENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Ionization instability of ion-acoustic waves

Stability of ion-acoustic waves in weakly ionized unmagnetized plasmas is investigated using fluid equations, assuming an arbitrary dependence of ion production and loss rates on electron and ion densities. The linear dispersion relation is derived and the condition for the positive growth rate is identified. Some examples corresponding to different plasma regimes are given to illustrate the application of the obtained results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of optimum voltages of ion focusing devices using computer techniques

Electric potentials for two dimensional cross sections of ion focusing devices used in a mass spectrometer are calculated via a series of computer programs designed to compute potentials between areas of fixed voltages. Ion trajectories within these devices may be determined by computer and a histogram obtained which plots ion density against ion position along a plate of the focusing device. For each lens system, a plate voltage may be changed, the electric potentials recalculated, and a new histogram calculated in order to determine if the new voltage configuration has increased the device's efficiency. This process may be repeated until the optimum voltage values have been found for maximum particle transmission in each focusing device.

Eckstein, B. A.↗

Studies on the dynamics of Venus ionosphere - Effects of varying the ionopause height and the onset of turbulence

The conservation equations of plasma dynamics in the upper ionosphere of Venus have been solved by using a spectral method in the horizontal and finite differencing in the vertical direction. The effect of varying the ionopause height on the computed nightside ion densities is investigated. These ion densities show a sharp decrease as the ionopause altitude is reduced to 300 km. The effect of viscous forces on the horizontal plasma flow is investigated for a wide range of values of the coefficient of viscosity. The Reynolds numbers characteristics of the flow are calculated and the conditions for the onset of turbulence discussed. It is found that the Reynolds number can be large (greater than 1000) in the subsolar region for a coefficient of viscosity of up to 1.6 x 10 to the -10th g/cm s. The influence of magnetic fields on viscosity is also discussed.

Singhal, R. P.↗

Sensitivity of the 6300 A twilight airglow to neutral composition

The field line interhemispheric plasma (FLIP) model is used to study the 6300 A line intensity measured during three morning twilights from the McDonald Observatory in Texas. The Imaging Spectrometric Observatory (ISO) measured the 6300 A intensity during the winter of 1987 and the spring and summer of 1988. The FLIP model reproduces the measured intensity and its variation through the twilight well on each day using neutral densities from the MSIS-86 empirical model. This is in spite of the fact that different component sources dominate the integrated volume emission rate on each of the days analyzed. The sensitivity of the intensity to neutral composition is computed by varying the N2, O2, and O densities in the FLIP model and comparing to the intensity computed with the unmodified MSIS-86 densities. The ion densities change self-consistently. Thus the change in neutral composition also changes the electron density. The F2 peak height is unchanged in the model runs for a given day. The intensity changes near 100 deg SZA are comparable to within 10% when either (O2), (N2), or (O) is changed, regardless of which component source is dominant. There is strong sensitivity to changes in (N2) when dissociative recombination is dominant, virtually no change in the nighttime (SZA greater than or equal to 108 deg) intensity with (O2) doubled, and sensitivity of over 50% to doubling or halving (O) at night. When excitation by conjugate photoelectrons is the dominant nighttime component source, the relative intensity change with (O) doubled or halved is very small. This study shows the strong need for simultaneous measurements of electron density and of emissions proportional to photoelectron fluxes if the 6300 A twilight airglow is to be used to retrieve neutral densities.

Melendez-Alvira, D. J.↗

Chemical sputtering of graphite by low temperature nitrogen plasmas at various substrate temperatures and ion flux densities

We report measurements of chemical sputtering yields of graphite exposed to low temperature nitrogen plasmas. The influence of surface temperature and incoming ion energy on the sputtering yields has been investigated in two distinct ion flux density regimes. Sputtering yields grow consistently with increasing temperatures in experiments with low flux density (Γ{sub i}≈10{sup 20} m{sup −2}s{sup −1}−10{sup 21} m{sup −2}s{sup −1}) and high flux density (Γ{sub i}≈10{sup 23} m{sup −2}s{sup −1}). Moreover, empirical fitting of the data suggests that the temperature of 670 °C is optimal for chemical sputtering at high flux density. Negative biasing of the samples was used to vary the ion energy in the low flux density regime. The sputtering yield in this case increases from 0.07 atoms/ion for E{sub i} = 1.5 eV to 0.19 atoms/ion for E{sub i} = 35 eV. After taking into account the dependence of the yields on temperature and ion energy, we evidenced a flux dependence of sputtering, similar to that found for chemical sputtering of carbon by hydrogen.

36 MATERIALS SCIENCE↗

Self-excited dust-acoustic waves in an electron-depleted nanodusty plasma

A dust density wave field is observed in a cloud of nanodust particles confined in a radio frequency plasma. Simultaneous measurements of the dust properties, grain size and density, as well as the wave parameters, frequency and wave number, allow for an estimate of the ion density, ion drift velocity, and the dust charge using a hybrid model for the wave dispersion. It appears that the charge on the dust grains in the cloud is drastically reduced to tens of elementary charges compared with isolated dust particles in a plasma. The charge is much higher at the cloud's periphery, i.e., towards the void in the plasma center and also towards the outer edge of the cloud.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The O+ Density Trough at 5000 km Altitude in the Polar Cap

At altitudes near 5000 km over the Southern polar cap region of the terrestrial magnetospherehonosphere, the Thermal Ion Dynamics Experiment (TIDE) onboard the Polar satellite has observed O+ ion density trough regions, in which the O+ densities were at least one order of magnitude lower than the surrounding O+ densities. In the O+ demify trough regions, the estimated O+ densities were generally lower than 0.01 per cc. The boundaries between normal density level regions and the trough density regions were usually abrupt transitions. From December 1, 1997 to November 30, 1998, polar cap O+ troughs in Polar/TIDE observations occurred at a frequency of about 48%. Statistical examination of the Polar perigee observations from December 1 , 1997 to November 30, 1998 shows that the Polar perigee passes evenly covered the southern polar cap region, while the O+ density trough was always located on the nightside portion of the polar cap magnetospherehonosphere, and that invariant latitude spans of such troughs could be as large as 230 in extent. The trough occurrence displayed strong seasonal dependence; in the winter season (e.g. for July in the southern hemisphere) the O+ ion density trough occurrence frequency ranged up to 92%, while in the summer season (e.g. for January in the southern hemisphere) it decreased to as infrequent as 15%. The O+ ion density trough occurrence appeared relatively independent of the geomagnetic Kp index, and IMF Bz, By conditions. However, as suggested by the seasonal dependence, the O+ ion density trough occurrence was strongly related to the solar zenith angle (SZA). In the SZA range 500 to 1250, the trough occurrence increased monotonically with SZA. Also, case-by-case examinations of near-simultaneous O+ densities and vertical velocities observed by the DMSP satellite group orbiting at 840 km altitude indicate that the O+ density troughs observed at 5000 km altitude exhibit moderate correlation or anti-correlation with topside ionosphere density or velocity features at 840 km altitude for approximately half of the near-conjunction cases examined.

Zeng, W.↗

On the ion front of a plasma expanding into a vacuum

Calculations are reported on the expansion of a plasma into a vacuum, using a model of cold ions and Boltzmann electrons. The initial distribution of the ions at the edge of the plasma greatly affects the subsequent expansion. An initial abrupt drop of ion density leads to an expansion in which the abrupt drop is maintained. A finite slope, however, leads to the formation of a peak of ion density at the ion front. The subsequent behaviour may lead to wave breaking and the formation of multi-valued ion velocity distributions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Composition of the nighttime ionospheric F 1 region near the magnetic equator

The effects of vertical E x B transport on NO(+), O2(+) and O(+) densities in the nighttime equatorial ionospheric F 1 region are investigated. Ion densities are calculated as functions of altitude, latitude and local time by the numerical solution of coupled, time-dependent ion continuity equations, taking into account production, loss by charge exchange and dissociative recombination and transport by diffusion and E x B drift. The results of the calculations are compared with measurements of NO(+), O2(+) and O(+) ion densities obtained at low altitudes by a mass spectrometer on board the Atmospheric Explorer C satellite, and are found to be consistent with the observations, suggesting that in the equatorial region, vertical transport by E x B drift is primarily responsible for producing the observed NO(+), O2(+) and O(+) density profiles. In addition, the reaction of O2(+) with N(4S) is found to be an important sink for O2(+) and a source of NO(+) ions. Implications of the observed and calculated near constancy of electron and ion densities with altitude when NO(+) is the dominant ion on the growth of large-scale irregularities are also considered

Anderson, D. N.↗

Investigations on caesium-free alternatives for H{sup −} formation at ion source relevant parameters

Negative hydrogen ions are efficiently produced in ion sources by the application of caesium. Due to a thereby induced lowering of the work function of a converter surface a direct conversion of impinging hydrogen atoms and positive ions into negative ions is maintained. However, due to the complex caesium chemistry and dynamics a long-term behaviour is inherent for the application of caesium that affects the stability and reliability of negative ion sources. To overcome these drawbacks caesium-free alternatives for efficient negative ion formation are investigated at the flexible laboratory setup HOMER (HOMogenous Electron cyclotron Resonance plasma). By the usage of a meshed grid the tandem principle is applied allowing for investigations on material induced negative ion formation under plasma parameters relevant for ion source operation. The effect of different sample materials on the ratio of the negative ion density to the electron density n{sub H{sup −}} /n{sub e} is compared to the effect of a stainless steel reference sample and investigated by means of laser photodetachment in a pressure range from 0.3 to 3 Pa. For the stainless steel sample no surface induced effect on the negative ion density is present and the measured negative ion densities are resulting from pure volume formation and destruction processes. In a first step the dependency of n{sub H{sup −}} /n{sub e} on the sample distance has been investigated for a caesiated stainless steel sample. At a distance of 0.5 cm at 0.3 Pa the density ratio is 3 times enhanced compared to the reference sample confirming the surface production of negative ions. In contrast for the caesium-free material samples, tantalum and tungsten, the same dependency on pressure and distance n{sub H{sup −}} /n{sub e} like for the stainless steel reference sample were obtained within the error margins: A density ratio of around 14.5% is measured at 4.5 cm sample distance and 0.3 Pa, linearly decreasing with decreasing distance to 7% at 1.5 cm. Thus, tantalum and tungsten do not significantly affect the negative ion density. First measurements conducted with LaB{sub 6} as well as with two types of diamond like carbon (DLC) n{sub H{sup −}} /n{sub e} of about 15% at 1 Pa were measured, which is comparable to the density ratio obtained for the stainless steel reference sample. At HOMER a surface induced enhancement of n{sub H{sup −}} is only observed when it exceeds the volume formation of H{sup −} which is also realistic for negative hydrogen ion sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling carbon nanotube growth on the catalyst-substrate surface subjected to reactive plasma [ ]

The paper presents a theoretical model to study the growth of the carbon nanotube (CNT) on the catalyst substrate surface subjected to reactive plasma. The charging rate of the CNT, kinetics of electron, ions and neutral atoms, the growth rate of the CNT because of diffusion and accretion of ions on the catalyst nanoparticle inclusion of the issue of the plasma sheath is undertaken in the present model. Numerical calculations on the effect of ion density and temperature and the substrate bias on the growth of the CNT have been carried out for typical glow discharge plasma parameters. It is found that the height of CNT increases with the ion density of carbon ions and radius of CNT decreases with hydrogen ion density. The substrate bias also affects the growth rate of the CNT. The field emission characteristics from the CNTs can be analyzed from the results obtained.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Non-invasive probe diagnostic method for electron temperature and ion current density in atmospheric pressure plasma jet source

The electrical probe diagnostics are very hard to be applied to atmospheric plasmas due to severe perturbation by the electrical probes. To overcome this, the probe for measuring electron temperature and ion current density is indirectly contacted with an atmospheric jet source. The plasma parameters are obtained by using floating harmonic analysis. The probe is mounted on the quartz tube that surrounds plasma. When a sinusoidal voltage is applied to a probe contacting on a quartz tube, the electrons near the sheath at dielectric tube are collected and the probe current has harmonic components due to probe sheath nonlinearity. From the relation of the harmonic currents and amplitude of the sheath voltage, the electron temperature near the wall can be obtained with collisional sheath model. The electron temperatures and ion current densities measured at the discharge region are in the ranges of 2.7–3.4 eV and 1.7–5.2 mA/cm{sup 2} at various flow rates and input powers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PREDICTIONS OF ION PRODUCTION RATES AND ION NUMBER DENSITIES WITHIN THE DIAMAGNETIC CAVITY OF COMET 67P/CHURYUMOV-GERASIMENKO AT PERIHELION

We present a one-dimensional ion chemistry model of the diamagnetic cavity of comet 67P/Churyumov-Gerasimenko, the target comet for the ESA Rosetta mission. We solve the continuity equations for ionospheric species and predict number densities of electrons and selected ions considering only gas-phase reactions. We apply the model to the subsolar direction and consider conditions expected to be encountered by Rosetta at perihelion (1.29 AU) in 2015 August. Our default simulation predicts a maximum electron number density of {approx}8 Multiplication-Sign 10{sup 4} cm{sup -3} near the surface of the comet, while the electron number densities for cometocentric distances r > 10 km are approximately proportional to 1/r {sup 1.23} assuming that the electron temperature is equal to the neutral temperature. We show that even a small mixing ratio ({approx}0.3%-1%) of molecules having higher proton affinity than water is sufficient for the proton transfer from H{sub 3}O{sup +} to occur so readily that other ions than H{sub 3}O{sup +}, such as NH{sub 4} {sup +} or CH{sub 3}OH{sub 2} {sup +}, become dominant in terms of volume mixing ratio in part of, if not throughout, the diamagnetic cavity. Finally, we test how the predicted electron and ion densities are influenced by changes of model input parameters, including the neutral background, the impinging EUV solar spectrum, the solar zenith angle, the cross sections for photo- and electron-impact processes, the electron temperature profile, and the temperature dependence of ion-neutral reactions.

79 ASTRONOMY AND ASTROPHYSICS↗

Ion loss processes in the stratosphere

Small ions consisting of aggregates of a few molecules determine th stratospheric electrical parameters such as conductivity, mobility, etc. The small ion density is controlled by the ionizing mechanisms for the production of ions and electrons and the loss processes for these charged particles. Ion production in stratosphere is chiefly due to galactic cosmic rays, and the loss processes due to recombination and attachment. Free electrons do not exist at stratospheric heights. The primary positive ion O2+ and the electrons are converted into complex clusters of positive and negative ions. The equilibrium ion density is governed by the equation of continuity for the production and loss of these ions. In the generalized equation of continuity, the gain or loss of ions due to transport is neglected. When aerosols or particulates are not present in the atmosphere, ions are loss due to ion-ion recombination. In the presence of aerosols, small ions can also be lost by attachment to the aerosols, and thus aerosols are likely to cause perturbations in the stratosphere electrification. A simplified model approach is adopted to study the effect of aerosols on the equilibrium ion density. The results of the analysis for the equatorial station Thumba (8.5 deg N) are presented.

Prasad, B. S. N.↗

Simulating the density of organic species in the atmosphere of Titan with a coupled ion-neutral photochemical model

We introduce a one-dimensional coupled ion-neutral photochemical kinetics and diffusion model to study the atmospheric composition of Titan in light of new theoretical kinetics calculations and scientific findings from the Cassini–Huygens mission. The model extends from the surface to the exobase. The atmospheric background, boundary conditions, vertical transport and aerosol opacity are all constrained by the Cassini–Huygens observations. The chemical network includes reactions between hydrocarbons, nitrogen and oxygen bearing species. It takes into account neutrals and both positive and negative ions with masses extending up to 116 and 74 u, respectively. We incorporate high-resolution isotopic photoabsorption and photodissociation cross sections for N 2 as well as new photodissociation branching ratios for CH 4 and C 2 H 2 . Ab initio transition state theory calculations are performed in order to estimate the rate coefficients and products for critical reactions. Critical reactions of production and loss for neutrals and ions are quantitatively assessed and thoroughly discussed. The vertical distributions of neutrals and ions predicted by the model generally reproduce observational data, suggesting that for the small species most chemical processes in Titan’s atmosphere and ionosphere are adequately described and understood; some differences are highlighted. Notable remaining issues include (i) the total positive ion density (essentially HCNH + ) in the upper ionosphere, (ii) the low mass negative ion densities (CN - , C 3 N - /C4H - ) in the upper atmosphere, and (iii) the minor oxygen-bearing species (CO 2 , H 2 O) density in the stratosphere. Pathways towards complex molecules and the impact of aerosols (UV shielding, atomic and molecular hydrogen budget, nitriles heterogeneous chemistry and condensation) are evaluated in the model, along with lifetimes and solar cycle variations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fundamental properties of field emission-driven direct current microdischarges

For half a century, it has been known that the onset of field emission in direct current microdischarges with gap sizes less than 10 {mu}m can lead to breakdown at applied voltages far less than predicted by Paschen's law. It is still unclear how field emission affects other fundamental plasma properties at this scale. In this work, a one-dimensional fluid model is used to predict basic scaling laws for fundamental properties including ion density, electric field due to space charge, and current-voltage relations in the pre-breakdown regime. Computational results are compared with approximate analytic solutions. It is shown that field emission provides an abundance of cathode electrons, which in turn create large ion concentrations through ionizing collisions well before Paschen's criterion for breakdown is met. Breakdown due to ion-enhanced field emission occurs when the electric field due to space charge becomes comparable to the applied electric field. Simple scaling analysis of the 1D Poisson equation demonstrates that an ion density of n{sub +} Almost-Equal-To 0.1V{sub A}{epsilon}{sub 0}/qd{sup 2} is necessary to significantly distort the electric field. Defining breakdown in terms of this critical ion density leads analytically to a simple, effective secondary emission coefficient {gamma}{sup Prime} of the same mathematical form initially suggested by Boyle and Kisliuk [Phys. Rev. 97, 255 (1955)].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗