SEARCH · Engineering Papers

Results for “INDUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Design of Low Inductance Busbar for 500 kVA Three-Level ANPC Converter

The adoption of SiC devices in high power applications enables higher switching speed, which requires lower circuit parasitic inductance to reduce the voltage overshoot. This paper presents the design of a busbar for a 500 kVA three-level active neutral point clamped (ANPC) converter. The layout of the busbar is discussed in detail based on the analysis of the multiple commutation loops, magnetic canceling effect, and DC-link capacitor placement. The loop inductance of the busbar is verified with simulation, impedance measurements, and converter experiments. The results match with each other, and the inductances of small and large loop are 6.5 nH and 17.5 nH respectively, which is significantly lower than the busbars of NPC type converters in other references.

Gui, Handong↗

DOE OSTI2025

Three and Two Phase Rotating Field Inductive Couplers for Wireless Power Transfer with One Phase per Layer Windings

Multiphase inductive wireless charging coils have been proposed recently to improve coupler surface power density, reduce component stress and size, and provide near-constant power delivery to charge mobile electric systems. Several aspects for the fundamental characterization of multiphase coils are explored up to six phases including approximate mutual inductance with size and turn variation, induced voltage, and output power estimation. The relative component stress and size of passive components for resonant operation are compared between the multiphase variants. A combination of an experimentally validated 3D electromagnetic finite element analysis (FEA) and power electronic co-simulations are used to validate the estimated quantities approximated with a mixture of analytical equations and an artificial neural network model for mutual inductance. A novel three-phase transmitter, two-phase receiver coil pair is also proposed for electric vehicle charging to reduce the number of connections and compensation complexity on the vehicle-side with improved power output compared to a two-phase configuration.

Lewis, Donovin D. [University of Kentucky]↗

DOE OSTI2026

A Unified Off-Board Charger for Three-Phase Inductive and Single-Phase Conductive EV Charging

This paper presents a unified off-board charger integrating a three-phase inductive power transfer (IPT) system and a single-phase conductive (plug-in) charger for electric vehicles (EVs). The proposed charger shares a high-frequency inverter and an integrated magnetic structure that enables three operating modes: conductive charging, inductive charging, and simultaneous charging. The transmitter coils for the three-phase IPT and the high-frequency transformer windings for the conductive charger are arranged on a common ferrite pad while maintaining magnetic decoupling between the two power transfer paths. The proposed unified architecture effectively increases charger utilization and power density without a proportional increase in cost, weight, or volume. Finite-element analysis using Ansys Maxwell confirms negligible coupling between the inductive and conductive coils, and the extracted parameters are employed in PLECS simulations to verify the independent operation of each charging mode.

Jo, Cheolhui [ORNL] (ORCID:0000000322692434)↗

DOE OSTI2022

Temperature modulation of CAMTA3 gene induction activity is mediated through the DNA binding domain

The calmodulin-binding transcription activator (CAMTA) proteins of Arabidopsis thaliana play a major role in cold acclimation, contributing to the rapid induction of the C-REPEAT BINDING FACTOR (CBF) genes and other genes that impart freezing tolerance in plants exposed to cold temperature (4°C). The goal of this study was to better understand how the gene induction activity of CAMTA3 is modulated by temperature. Our results indicate that a severely truncated version of CAMTA3, CAMTA3 334 , which includes the N-terminal CG-1 DNA binding domain and a newly identified transcriptional activation domain (TAD), was able to rapidly induce the expression of CBF2 and two newly identified target genes, EXPANSIN-LIKE A1 (EXPL1) and NINE-CIS-EPOXYCAROTENOID DIOXYGENASE 3 (NCED3), in response to cold temperature. Additionally, CAMTA3 334 was able to restore freezing tolerance when expressed in a camta23 double mutant. The ability of CAMTA3 and CAMTA3 334 to induce target genes at cold temperature did not involve increased levels of these proteins or increased binding of these proteins to target gene promoters in cold-treated plants. Rather, domain-swapping experiments indicated that the CAMTA3 CG-1 domain conferred temperature dependence to the ability of the CAMTA3 TAD to induce gene expression. The CG-1 domain also enabled the TAD to induce the expression of target genes at a moderate temperature (22°C) in response to cycloheximide treatment, consistent with the TAD activity not being intrinsically temperature dependent. We propose a working model in which the temperature modulation of CAMTA3 gene induction activity occurs independently from the C-terminal calmodulin-binding domains that previously have been proposed to activate CAMTA3 transcriptional activity in response to cold temperature.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2016

Design and physical features of inductive coaxial copper vapor lasers

A physical model of a copper vapor laser pumped by a pulse-periodic inductive (electrodeless) discharge is considered. The feasibility of efficient laser pumping by an inductive discharge and reaching high output parameters comparable to those of conventional copper vapor lasers pumped by a longitudinal electrode discharge is demonstrated. The design and physical features of an inductive copper vapor laser with an annular working volume are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2015

Characterization of Ceramic Material Produced From a Cold Crucible Induction Melter Test

This report summarizes the results from characterization of samples from a melt processed surrogate ceramic waste form. Completed in October of 2014, the first scaled proof of principle cold crucible induction melter (CCIM) test was conducted to process a Fe-hollandite-rich titanate ceramic for treatment of high level nuclear waste. X-ray diffraction, electron microscopy, inductively coupled plasma-atomic emission spectroscopy (and inductively coupled plasma-mass spectroscopy for Cs), and product consistency tests were used to characterize the CCIM material produced. Core samples at various radial locations from the center of the CCIM were taken. These samples were also sectioned and analyzed vertically. Together, the various samples were intended to provide an indication of the homogeneity throughout the CCIM with respect to phase assemblage, chemical composition, and chemical durability. Characterization analyses confirmed that a crystalline ceramic with desirable phase assemblage was produced from a melt using a CCIM. Hollandite and zirconolite were identified in addition to possible highly-substituted pyrochlore and perovskite. Minor phases rich in Fe, Al, or Cs were also identified. Remarkably only minor differences were observed vertically or radially in the CCIM material with respect to chemical composition, phase assemblage, and durability. This recent CCIM test and the resulting characterization in conjunction with demonstrated compositional improvements support continuation of CCIM testing with an improved feed composition and improved melter system.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Induction Heating for Tritium Storage Beds

Metal hydride beds used for storing hydrogen isotopes accumulate helium due to beta-decay of tritium. Helium alters the hydrogen capacity and plateau pressures of these storage beds and ultimately results in the beds being disqualified for use in tritium facilities. Removal of helium and hydrogen isotopes for disposal or storage bed regeneration can be achieved with sufficient heating; however, existing Gen 1 and Gen 2 storage beds are not designed to reach helium removal temperatures and face disposal challenges. In this report, we describe experiments and Multiphysics models that were used to develop a method to achieve induction heating of existing tritium storage beds using induction coils placed on the outside of the beds. The heating method involves low-frequency (< 100 Hz) induction heating through flexible solenoid coils that wrap tightly around the outer jacket of a tritium storage bed. This method of heating offers a pragmatic path to heat existing storage beds for metal hydride regeneration, helium removal for disposal, and possibly routine gas cycling operations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Report of METL Mutual Inductance Level Sensor Development for Use in Liquid Metals – FY2023

A robust mutual inductance level sensor (MILS) for use in high temperature liquid metals has been developed at Argonne National Laboratory (ANL). The current design utilizes mineral insulated cables with a 300-series stainless steel sheath, magnesium oxide insulation, and a single copper conductor. Two coils are wrapped on a common core made of a 300-series stainless steel tube. One coil is energized with an alternating current (AC) source, and this electromagnetically couples with the second coil to generate an induced voltage. The voltage is measured to determine the mutual induction between the coils, and the mutual inductance measurement can be used to determine the level of a nearby liquid metal volume. The MILS can be located in an isolating thimble that is fully sealed to a vessel containing liquid metal for ease of maintenance and replacement. When the primary coil is energized with the AC source, the coil not only electromagnetic (EM) couples with the second coil, but also the surrounding liquid metal. The EM coupling with the surrounding liquid metal reduces the EM coupling with the second coil, producing an inverse-linear relationship between liquid metal level and secondary coil voltage. This has all been demonstrated at the Mechanisms Engineering Test Loop (METL) liquid sodium facility at ANL. The most current iteration of the MILS system is the MILS-MK-II. This sensor system has been commissioned in a non-sodium test stand where calibrations were performed using a sodium analog. The calibrations proved to be highly linear and repeatable. The MILS-MK-II has been installed in the METL expansion tank where high temperature sodium tests have been performed. The MILS-MK-II has been calibrated against a known standard at temperature of 300°C, and the calibrations have proved to be highly linear and repeatable. The calibrated MILS-MK-II has been in operation in the METL facility for several thousands of hours at temperatures around 300°C. The experimental data has been used to develop and validate electromagnetic finite element models in COMSOL Multiphysics, and now these models can be used to advance the development of the sensor system. Next steps will include temperature compensation to allow for operation at various temperatures. Additionally, efforts to incorporate a self-calibration methodology are underway.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2023

System study of the use of ferrite inductive inserts to improve beam in PSR

The effect of space charge has long been compensated in the PSR by offsetting the capacitive impedance of the ring with an inductive component. The effect of space charge will be discussed in detail as it pertains to rings in general, and the history of the use of the inductive insert in the PSR is also presented. An overview of ferrite properties is then provided, as well as methods for measuring ferrite properties, and several candidate ferrites are discussed. Finally, the considerations for designing an inductive insert will be fully presented.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Low Temperature CO2 Capture from an NGCC Flue Gas Using a Magnetically Stabilized, Inductively Heated Fluidized Bed Reactor

The lab sorbent testing finalized the sorbent composition and operating conditions for the integrated unit. The bench unit design included COMSOL simulation to finalize the coil design and select initial operating conditions of the power supply system. Fluidized bed testing with the induction heating verified that a heating efficiency of up to 90% can be achieved. The integrated bench unit operations provided valuable data confirming the feasibility of using induction heating for the desorption of CO2. Major challenge observed was the limited working capacity of the sorbent, requiring additional development in future projects. In addition, a large-scale reactor demonstration is required to mitigate the risk of uniform temperature distribution and heating efficiency over a large cross-sectional area when using induction heating.

Tong, Andrew↗

DOE OSTI2020

Induction heating cells with controllable thermal expansion of bladders and methods of using thereof

Disclosed herein are induction heating cells and methods of using these cells for processing. An induction heating cell may be used for processing (e.g., consolidating and/or curing a composite layup having a non-planar portion. The induction heating cell comprises a caul, configured to position over and conform to this non-planar portion. Furthermore, the cell comprises a mandrel, configured to position over the caul and force the caul again the surface of the feature. The CTE of the caul may be closer to the CTE of the composite layup than to the CTE of the mandrel. As such, the caul isolates the composite layup from the dimensional changes of the mandrel, driven by temperature fluctuations. At the same time, the caul may conform to the surface of the mandrel, which can be used to define the shape and transfer pressure to the non-planar portion.

42 ENGINEERING↗

DOE OSTI2021

Induction heating cells with cauls over mandrels methods of using thereof

Matsen, Marc R.↗

DOE OSTI2015

Inductance studies for the Quench Protection system of the Mu2e TS solenoids

This is a preliminary study on the solenoids for the Mu2e experiment. An overview of the Mu2e solenoids is first provided. Then the two solenoid prototypes were tested in the Fermilab Central Helium Liquefying facility. My analysis is focused on measuring and modeling the inductance (self and mutual) of the magnets. This aspect is crucial for Quench Detection Systems and for the control parameters of the power supply driving the magnets. During the first part of my experience at Fermilab, I worked on mathematical mod- els for the magnets to understand their expected behavior. A geometric model based on the Neumann formula was developed and implemented for inductance calculations. This model estimates the inductance (self and mu- tual) of all the Mu2e solenoids. A finite element magnetic model for the two prototype magnets was developed to compare to the results of the geometric model. In the second part of my study I collected measurements on the real Transport Solenoid prototypes. T he solenoids were powered in different configurations in order to identify the circuit model and its parameters. These experiments were first carried on the warm magnets and then on the magnets at a cryo- genic temperature. This allows for a comparison between room temperature and superconducting state.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2012

Design and performance of a new induction furnace for heat treatment of superconducting radiofrequency niobium cavities

Superconducting radio frequency (SRF) cavities made of high purity niobium (Nb) are the building blocks of many modern particle accelerators. The fabrication process includes several cycles of chemical and heat treatment at low ({approx}120 Degree-Sign C) and high ({approx}800 Degree-Sign C) temperatures. In this contribution, we describe the design and performance of an ultra-high-vacuum furnace which uses an induction heating system to heat treat SRF cavities. Cavities are heated by radiation from the Nb susceptor. By using an all-niobium hot zone, contamination of the Nb cavity by foreign elements during heat treatment is minimized and allows avoiding subsequent chemical etching. The furnace was operated up to 1400 Degree-Sign C with a maximum pressure of {approx}1 Multiplication-Sign 10{sup -5} Torr and the maximum achievable temperature is estimated to be higher than 2000 Degree-Sign C. Initial results on the performance of a single cell 1.5 GHz cavity made of ingot Nb heat treated at 1200 Degree-Sign C using this new induction furnace and without subsequent chemical etching showed a reduction of the RF losses by a factor of {approx}2 compared to cavities made of fine-grain Nb which underwent standard chemical and heat treatments.

43 PARTICLE ACCELERATORS↗

DOE OSTI2018

Design and Performance of the Antenna-Coupled Lumped-Element Kinetic Inductance Detector

Focal plane arrays consisting of low-noise, polarisation-sensitive detectors have made possible the pioneering advances in the study of the cosmic microwave background (CMB). To make further progress, the next generation of CMB experiments (e.g. CMB-S4) will require a substantial increase in the number of detectors compared to current instruments. Arrays of kinetic inductance detectors (KIDs) provide a possible path to realising such large-format arrays owing to their intrinsic multiplexing advantage and relative cryogenic simplicity. In this paper, we report on the design of a variant of the traditional KID design: the antenna-coupled lumped-element KID. A polarisation-sensitive twin-slot antenna placed behind an optimised hemispherical lens couples power onto a thin-film superconducting microstrip line. The power is then guided into the inductive section of an aluminium KID, where it is absorbed and modifies both the resonant frequency and quality factor of the KID. We present the various aspects of the design and preliminary results from the first set of seven-element prototype arrays and compare to the expected modelled performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2018

Thermal Kinetic Inductance Detectors for Ground-Based Millimeter-Wave Cosmology

We show measurements of thermal kinetic inductance detectors (TKIDs) intended for millimeter-wave cosmology in the 200–300 GHz atmospheric window. The TKID is a type of bolometer which uses the kinetic inductance of a superconducting resonator to measure the temperature of the thermally isolated bolometer island. We measure bolometer thermal conductance, time constant, and noise equivalent power. We also measure the quality factor of our resonators as the bath temperature varies to show they are limited by effects consistent with coupling to two-level systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2018

Development of a Data Acquisition System for Kinetic Inductance Detectors: Wide Dynamic Range and High Sampling Rate for Astronomical Observation

Microwave kinetic inductance detectors have a variety of potential applications in astronomical observations. We built a data acquisition system for kinetic inductance detectors combining a dedicated analog board and a commercially available digital board to meet the requirements of astronomical measurements, such as observation of the cosmic microwave background. This paper reports the status of the development of the data acquisition system. We have already achieved simultaneous readout through 120 channels using a direct down-conversion method to decode the signal. A variety of software has been developed and tested using the functionalities of the system and actual detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2018

Inductive System for Reliable Magnesium Level Detection in a Titanium Reduction Reactor

The determination of the Magnesium level in a Titanium reduction retort by inductive methods is often hampered by the formation of Titanium sponge rings which disturb the propagation of electromagnetic signals between excitation and receiver coils. We present a new method for the reliable identification of the Magnesium level which explicitly takes into account the presence of sponge rings with unknown geometry and conductivity. The inverse problem is solved by a look-up-table method, based on the solution of the inductive forward problems for several tens of thousands parameter combinations.

36 MATERIALS SCIENCE↗