Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Structure of the InAlAs/InP interface by atomically resolved energy dispersive spectroscopy

The structure of epitaxially grown InAlAs/InP interfaces was studied using atomically resolved x-ray energy dispersive spectroscopy in scanning transmission electron microscopy. As and P sublattices show sharp termination on the interface. The In sublattice is continuous across the interface. The study has shown the depletion of the Al concentration at the interface; at the last atomic columns of the InAlAs, In occupancy is close to 100%, while Al occupancy is almost zero. A monolayer of InAs at the interface is consistent with substitution of As for P at the surface preceding growth.

36 MATERIALS SCIENCE↗

Temperature-dependent energy band gap variation in self-organized InAs quantum dots

We investigated the temperature-dependent variation of the photoluminescence emission energy of self-organized InAs/GaAs quantum dots (QDs) grown by conventional Stranski-Krastanov (SK) molecular beam epitaxy and migration-enhanced molecular beam epitaxy (MEMBE) and that of MEMBE InAs QDs in a symmetric and an asymmetric In{sub 0.2}Ga{sub 0.8}As/GaAs well. The temperature-dependent energy variation of each QD is analyzed in low and high temperature regions, including a sigmoidal behavior of conventional SK quantum dots with the well-known Varshni and semi-empirical Fan models.

36 MATERIALS SCIENCE↗

X-ray reciprocal space mapping of dislocation-mediated strain relaxation during InGaAs/GaAs(001) epitaxial growth

Dislocation-mediated strain relaxation during lattice-mismatched InGaAs/GaAs(001) heteroepitaxy was studied through in situ x-ray reciprocal space mapping (in situ RSM). At the synchrotron radiation facility SPring-8, a hybrid system of molecular beam epitaxy and x-ray diffractometry with a two-dimensional detector enabled us to perform in situ RSM at high-speed and high-resolution. Using this experimental setup, four results in terms of film properties were simultaneously extracted as functions of film thickness. These were the lattice constants, the diffraction broadenings along in-plane and out-of-plane directions, and the diffuse scattering. Based on correlations among these results, the strain relaxation processes were classified into four thickness ranges with different dislocation behavior. In addition, the existence of transition regimes between the thickness ranges was identified. Finally, the dominant dislocation behavior corresponding to each of the four thickness ranges and transition regimes was noted.

36 MATERIALS SCIENCE↗

Coexistence of type-I and type-II band alignments in antimony-incorporated InAsSb quantum dot nanostructures

Antimony-incorporated InAsSb quantum dots (QDs) are grown by molecular beam epitaxy on GaAs(001) substrates. The QD density increases {approx}7 times while the QD height decreases {approx}50% due to the increase of QD nucleation sites after Sb incorporation into the GaAs buffer layer and into the InAs QDs. These Sb-incorporated InAsSb QDs show red-shift in the photoluminescence (PL) spectrum and large energy separation between confined energy levels. More interestingly, besides the typical type-I QD transition, an additional peak from the recombination at wetting layer interface develops as the excitation laser intensity increases. This peak clearly exhibits type-II characteristics from the measurement of a large blue-shift of the PL peak and a long PL decay time. Finally, the mechanism of the coexistence of type-I and type-II band alignments is discussed.

36 MATERIALS SCIENCE↗

High density InAlAs/GaAlAs quantum dots for non-linear optics in microcavities

Structural and optical properties of InAlAs/GaAlAs quantum dots grown by molecular beam epitaxy are studied using transmission electron microscopy and temperature- and time-resolved photoluminescence. The control of the recombination lifetime (50 ps-1.25 ns) and of the dot density (5.10{sup -8}-2.10{sup 11} cm{sup -3}) strongly suggest that these material systems can find wide applications in opto-electronic devices as focusing non-linear dispersive materials as well as fast saturable absorbers.

36 MATERIALS SCIENCE↗

Faster radial strain relaxation in InAs-GaAs core-shell heterowires

The structure of wurtzite and zinc blende InAs-GaAs (001) core-shell nanowires grown by molecular beam epitaxy on GaAs (001) substrates has been investigated by transmission electron microscopy. Heterowires with InAs core radii exceeding 11 nm, strain relax through the generation of misfit dislocations, given a GaAs shell thickness greater than 2.5 nm. Strain relaxation is larger in radial directions than axial, particularly for shell thicknesses greater than 5.0 nm, consistent with molecular statics calculations that predict a large shear stress concentration at each interface corner.

36 MATERIALS SCIENCE↗

Effect of spacer layer thickness on multi-stacked InGaAs quantum dots grown on GaAs (311)B substrate for application to intermediate band solar cells

We have investigated the properties of multi-stacked layers of self-organized In{sub 0.4}Ga{sub 0.6}As quantum dots (QDs) on GaAs (311)B grown by molecular beam epitaxy. We found that a high degree of in-plane ordering of QDs structure with a six-fold symmetry was maintained though the growth has been performed at a higher growth rate than the conventional conditions. The dependence of photoluminescence characteristics on spacer layer thickness showed an increasing degree of electronic coupling between the stacked QDs for thinner spacer layers. The external quantum efficiency for an InGaAs/GaAs quantum dot solar cell (QDSC) with a thin spacer layer thickness increased in the longer wavelength range due to additive contribution from QD layers inserted in the intrinsic region. Furthermore, a photocurrent production by 2-step photon absorption has been observed at room temperature for the InGaAs/GaAs QDSC with a spacer layer thickness of 15 nm.

36 MATERIALS SCIENCE↗

Probing into hybrid organic-molecule and InAs quantum-dots nanosystem with multistacked dots-in-a-well units

Hybridizing air-stable organic-molecules with advanced III-V semiconductor quantum-dots (QDs) structures can be utilized to create a new generation of biochemical sensing devices. In order to enhance their optical performances, the active regions in these QDs structures commonly consist of multistacked dots-in-a-well (DWELL) units. The effects of grafted molecules on the performances of the QDs structures with multistacked DWELLs, however, still remain unclear. Here, we show the significant improvements in the optical properties of InAs QDs in a hybrid nanosystem obtained by grafting biocompatible diazonium salt compound (amine donor) atop InAs QDs structure. Since its interface between the QDs structure and molecular monolayer retains an uncontaminated and non-oxidized condition, the nanosystem is an ideal platform to study the intrinsic properties of charge-carrier transport inside the system. Because of the complexity of the energy-levels in the QDs structure due to the existing surface QDs and DWELLs, selective excitation wavelengths (400, 633, and 885 nm, respectively) with different photo-energies are used to exactly analyze the complete charging mechanism in these QDs. A clear view of charge-carrier transfer inside the nanosystem is revealed by employing photoluminescence technique under selective-wavelength excitations. The present work provides new quantitative evidences for exploiting inorganic QDs applications in complex biological systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reduction in interface state density of Al{sub 2}O{sub 3}/InGaAs metal-oxide-semiconductor interfaces by InGaAs surface nitridation

We report the decrease in interface trap density (D{sub it}) in Al{sub 2}O{sub 3}/InGaAs metal-oxide-semiconductor (MOS) capacitors by using electron cyclotron resonance plasma nitridation of the InGaAs surfaces. The impact of the nitridation process on the MOS interface properties is quantitatively examined. The plasma nitridation process is observed to form a nitrided layer at the InGaAs surface. The nitridation using microwave power (P{sub microwave}) of 250 W and nitridation time (t{sub nitridation}) of 420 s can form Al{sub 2}O{sub 3}/InGaAs MOS interfaces with a minimum D{sub it} value of 2.0 Multiplication-Sign 10{sup 11} cm{sup -2} eV{sup -1}. On the other hand, the nitridation process parameters such as P{sub microwave} and t{sub nitridation} are found to strongly alter D{sub it} (both decrease and increase are observed) and capacitance equivalent thickness (CET). It is found that the nitridation with higher P{sub microwave} and shorter t{sub nitridation} can reduce D{sub it} with less CET increase. Also, it is observed that as t{sub nitridation} increases, D{sub it} decreases first and increases later. It is revealed from XPS analyses that minimum D{sub it} can be determined by the balance between the saturation of nitridation and the progress of oxidation. As a result, it is found that the superior MOS interface formed by the nitridation is attributable to the existence of oxide-less InGaN/InGaAs interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A portable molecular beam epitaxy system for in situ x-ray investigations at synchrotron beamlines

A portable synchrotron molecular beam epitaxy (MBE) system is designed and applied for in situ investigations. The growth chamber is equipped with all the standard MBE components such as effusion cells with shutters, main shutter, cooling shroud, manipulator, reflection high energy electron diffraction setup, and pressure gauges. The characteristic feature of the system is the beryllium windows which are used for in situ x-ray measurements. An UHV sample transfer case allows in vacuo transfer of samples prepared elsewhere. We describe the system design and demonstrate its performance by investigating the annealing process of buried InGaAs self-organized quantum dots.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Site-controlled Ag nanocrystals grown by molecular beam epitaxy-Towards plasmonic integration technology

We demonstrate site-controlled growth of epitaxial Ag nanocrystals on patterned GaAs substrates by molecular beam epitaxy with high degree of long-range uniformity. The alignment is based on lithographically defined holes in which position controlled InAs quantum dots are grown. The Ag nanocrystals self-align preferentially on top of the InAs quantum dots. No such ordering is observed in the absence of InAs quantum dots, proving that the ordering is strain-driven. The presented technique facilitates the placement of active plasmonic nanostructures at arbitrarily defined positions enabling their integration into complex devices and plasmonic circuits.

36 MATERIALS SCIENCE↗

Light emission from InGaAs:Bi/GaAs quantum wells at 1.3 {mu}m

Highly strained InGaAs:Bi quantum wells (QWs) were grown on (001)-oriented GaAs substrates by molecular beam epitaxy (MBE). Photoluminescence (PL) reveals strong improvements in the optical properties evidenced by 10 times enhancement in PL intensity and extended emission wavelength up to 1.29 {mu}m when Bi is introduced to InGaAs/GaAs QWs. The improved optical quality results from the Bi surfactant effect as well as the Bi incorporation. Post growth thermal annealing shows that Bi atoms in InGaAs/GaAs QWs do not show good thermal stability at 650 Degree-Sign C and tend to diffuse out of the QWs resulting in large wavelength blue-shifts.

36 MATERIALS SCIENCE↗

Critical shell thickness for InAs-Al{sub x}In{sub 1-x}As(P) core-shell nanowires

InAs nanowires with Al{sub x}In{sub 1-x}P or Al{sub x}In{sub 1-x}As shells were grown on GaAs substrates by the Au-assisted vapour-liquid-solid method in a gas source molecular beam epitaxy system. Core diameters and shell thicknesses were measured by transmission electron microscopy (TEM). These measurements were then related to selected area diffraction patterns to verify either interface coherency or relaxation through misfit dislocations. A theoretical strain model is presented to determine the critical shell thickness for given core diameters. Zincblende stiffness parameters are transformed to their wurtzite counterparts via a well known tensor transformation. An energy criterion is then given to determine the shell thickness, at which coherency is lost and dislocations become favourable. Our model only considers axial strain relieved by edge dislocations since they were the only type of dislocation observed directly by TEM.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Intense terahertz emission from molecular beam epitaxy-grown GaAs/GaSb(001)

Intense terahertz (THz) electromagnetic wave emission was observed in undoped GaAs thin films deposited on (100) n-GaSb substrates via molecular beam epitaxy. GaAs/n-GaSb heterostructures were found to be viable THz sources having signal amplitude 75% that of bulk p-InAs. The GaAs films were grown by interruption method during the growth initiation and using various metamorphic buffer layers. Reciprocal space maps revealed that the GaAs epilayers are tensile relaxed. Defects at the i-GaAs/n-GaSb interface were confirmed by scanning electron microscope images. Band calculations were performed to infer the depletion region and electric field at the i-GaAs/n-GaSb and the air-GaAs interfaces. However, the resulting band calculations were found to be insufficient to explain the THz emission. The enhanced THz emission is currently attributed to a piezoelectric field induced by incoherent strain and defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

2.8 {mu}m emission from type-I quantum wells grown on InAs{sub x}P{sub 1-x}/InP metamorphic graded buffers

We report 2.8 {mu}m emission from compressively strained type-I quantum wells (QWs) grown on InP-based metamorphic InAs{sub x}P{sub 1-x} step-graded buffers. High quality metamorphic graded buffers showed smooth surface morphology and low threading dislocation densities of approximately 2.5 Multiplication-Sign 10{sup 6} cm{sup -2}. High-resolution x-ray diffraction scans showed strong satellites from multiple quantum wells grown on metamorphic buffers, and cross-sectional transmission electron microscopy revealed smooth and coherent quantum well interfaces. Room-temperature photoluminescence emission at 2.8 {mu}m with a narrow linewidth ({approx}50 meV) shows the promise of metamorphic growth for mid-infrared laser diodes on InP.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Long wavelength (>1.55 {mu}m) room temperature emission and anomalous structural properties of InAs/GaAs quantum dots obtained by conversion of In nanocrystals

We demonstrate that molecular beam epitaxy-grown InAs quantum dots (QDs) on (100) GaAs obtained by conversion of In nanocrystals enable long wavelength emission in the InAs/GaAs material system. At room temperature they exhibit a broad photoluminescence band that extends well beyond 1.55 {mu}m. We correlate this finding with cross-sectional scanning tunneling microscopy measurements. They reveal that the QDs are composed of pure InAs which is in agreement with their long-wavelength emission. Additionally, the measurements reveal that the QDs have an anomalously undulated top surface which is very different to that observed for Stranski-Krastanow grown QDs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Observation of photo darkening in self assembled InGaAs/GaAs quantum dots

Photo darkening was observed in epitaxial InGaAs/GaAs quantum dots (QDs). The photoluminescence (PL) intensity of the QDs showed a non-reversible decrease under continuous laser irradiation. The time constants varied from tens of minutes to several hours, depending on the applied laser power. Based on the spectral evolution, it was concluded that the observed phenomenon should originate from laser induced structural damage and a sustained increase of non-radiative recombination rate in the wetting layer. Additionally, according to the PL decay dynamics at different laser powers, it is argued that there should exist other processes that hinder PL degradation at a high laser power.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single InAs quantum dot coupled to different 'environments' in one wafer for quantum photonics

Self assembled small InAs quantum dots (SQDs) were formed in various densities and environments using gradient InAs deposition on a non-rotating GaAs substrate. Two SQD environments (SQD I and SQD II) were characterized. SQD I featured SQDs surrounded by large QDs, and SQD II featured individual SQDs in the wetting layer (WL). Micro-photoluminescence of single QDs embedded in a cavity under various excitation powers and electric fields gave insight into carrier transport processes. Potential fluctuations of the WL in SQD II, induced by charge redistribution, show promise for charge-tunable QD devices; SQD I shows higher luminescence intensity as a single-photon source.

77 NANOSCIENCE AND NANOTECHNOLOGY↗