Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INCLUSIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Dual origin of ferropericlase inclusions within super-deep diamonds

Ferropericlase [(Mg,Fe)O] is one of the major constituents of Earth's lower mantle and the most abundant mineral inclusion in sub-lithospheric diamonds. Although a lower mantle origin for ferropericlase inclusions has often been suggested, some studies have proposed that many of these inclusions may instead form at much shallower depths, in the deep upper mantle or transition zone. No straightforward method exists to discriminate ferropericlase of lower-mantle origin without characteristic mineral associations, such as co-existing former bridgmanite. To explore ferropericlase-diamond growth relationships, we have investigated the crystallographic orientation relationships (CORs), determined by single-crystal X-ray diffraction, between 57 ferropericlase inclusions and 37 diamonds from Juina (Brazil) and Kankan (Guinea). We show that ferropericlase inclusions can develop specific (16 inclusions in 12 diamonds), rotational statistical (9 inclusions in 7 diamonds) and random (32 inclusions in 25 diamond) CORs with respect to their diamond hosts. All measured inclusions showing a specific COR were found to be Fe-rich (X FeO > 0.30). Coexistence of non-randomly and randomly oriented ferropericlase inclusions within the same diamond indicates that their CORs may be variably affected by local growth conditions. However, the occurrence of specific CORs only for Fe-rich inclusions indicates that Fe-rich ferropericlases have a distinct genesis and are syngenetic with their host diamonds. In conclusion, this result provides strong support for a dual origin for ferropericlase in Earth's mantle, with Fe-rich compositions likely indicating redox growth in the upper mantle, while more Mg-rich compositions with random COR mostly representing ambient lower mantle trapped as protogenetic inclusions.

58 GEOSCIENCES↗

Hydrogen accumulation in and at the perimeter of U–C–N–O inclusions in uranium – A SIMS analysis

We use imaging secondary ion mass spectrometry (SIMS) with a Cameca NanoSIMS 50 to determine the distribution and relative concentration of H in two uranium metal samples: sample1(LANL), as cast with less than 1 wppm H, sample2(Y12), outgassed 6 h in vacuum at 630 °C to remove hydrogen. H ion counts appear almost exclusively associated with ‘carbide’ inclusions, based on H – , C – and O – ion images for uranium surfaces sputter-cleaned in situ with a 16 keV Cs + ion beam. Here, two classes of inclusions are identified: small, micrometer to sub-micrometer inclusions and larger, clearly angular inclusion (≥3 μm). In sample1(LANL) the large inclusions (≥250/mm 2 ) show a low H – /C – ratio inside, and have H – /C – ratios at their perimeters comparable in magnitude to that seen in μm-size inclusions. Small inclusions (~2500/mm 2 ) contain H more uniformly throughout and, averaged over the inclusion, the small inclusions have approximately 50 times higher relative H concentration than the large inclusions. Sample2(Y12) was found to have comparable H – /C – ratios in the large carbides, but no small inclusions were observed. Because of the matrix-sensitivity of SIMS, H/C ratios representing the actual composition of the inclusions cannot be derived from the H – /C – ratios without calibration UC samples with known H content, which are not currently available.

36 MATERIALS SCIENCE↗

A unique, (almost) unaltered spinel-rich fine-grained inclusion in Kainsaz

A unique, spinel-rich, extremely porous fine-grained inclusion in the Kainsaz (CO3) meteorite is reported. This inclusion is the least altered fine-grained inclusion yet discovered, having escaped almost entirely the secondary alterations experienced by Allende fine-grained inclusions. The inclusion is comprised of loosely packed 5-30 microns spinel grains mantled by thin layers of melilite, anorthite, and diopsidic pyroxene. The inclusion, which has over 30 vol pct void space, is one of the most spinel-rich, most porous fine-grained inclusions seen to date. The mineralogy of the inclusion matches that which has been predicted for a precursor of the altered mineral assemblages of Allende fine-grained inclusions, though a lack of interstitial material in the Kainsaz inclusion reduces the likelihood of a direct genetic relationship between the two (Allende fine-grained inclusions contain abundant interstitial material). Its mineralogical composition confirms that the precursors of other, more altered, fine-grained inclusions were assemblages of refractory minerals exclusively.

Holmberg, B. B.↗

Initial Assessment of the Effects of Nonmetallic Inclusions on Fatigue Life of Powder-Metallurgy-Processed Udimet(TM) 720

The fatigue lives of modern powder metallurgy (PM) disk alloys are influenced by variabilities in alloy microstructure and mechanical properties. These properties can vary due to the different steps of materials/component processing and machining. One of these variables, the presence of nonmetallic inclusions, has been shown to significantly degrade low-cycle fatigue (LCF) life. Nonmetallic inclusions are inherent defects in powder alloys that are a by-product of powder-processing techniques. Contamination of the powder can occur in the melt, during powder atomization, or during any of the various handling processes through consolidation. In modern nickel disk powder processing facilities, the levels of inclusion contamination have been reduced to less than 1 part per million by weight. Despite the efforts of manufacturers to ensure the cleanliness of their powder production processes, the presence of inclusions remains a source of great concern for the designer. the objective of this study was to investigate the effects on fatigue life of these inclusions. Since natural inclusions occur so infrequently, elevated levels of inclusions were carefully introduced in a nickel-based disk superalloy, Udimet 720 (registered trademark of Special Metals Corporation), produced using PM processing. Multiple strain-controlled fatigue tests were then performed on this material at 650 C. Analyses were performed to compare the LCF lives and failure initiation sites as functions of inclusion content and fatigue conditions. A large majority of the failures in specimens with introduced inclusions occurred at cracks initiating from inclusions at the specimen surface. The inclusions could reduce fatigue life by up to 100 times. These effects were found to be dependent on strain range and strain ratio. Tests at lower strain ranges and higher strain ratios produced larger effects of inclusions on life.

Gabb, T. P.↗

Ceramic Inclusions in Powder Metallurgy Disk Alloys: Characterization and Modeling

Powder metallurgy alloys are increasingly used in gas turbine engines, especially in turbine disk applications. Although powder metallurgy materials have many advantages over conventionally cast and wrought alloys (higher strength, higher temperature capability, etc.), they suffer from the rare occurrence of ceramic defects (inclusions) that are inherent to the powder atomization process. These inclusions can have a potentially large detrimental effect on the durability of individual components. An inclusion in a high stress location can act as a site for premature crack initiation and thereby considerably reduce the fatigue life. Because these inclusions are exceedingly rare, they typically do not reveal themselves in the process of characterizing the material for a particular application (the cumulative volume of the test bars in a fatigue life characterization is typically on the order of a single actual component). Ceramic inclusions have, however, been found to be the root cause of a number of catastrophic engine failures. To investigate the effect of these inclusions in detail, we have undertaken a study where known populations of ceramic particles, whose composition and morphology are designed to mimic the "natural" inclusions, are added to the precursor powder. Surface-connected inclusions have been found to have a particularly large detrimental effect on fatigue life; therefore, the quantity of ceramic "seeds" added is calculated to ensure that a minimum number will intersect the surface of the fatigue test bars. Because the ceramic inclusions are irregularly shaped and have a tendency to break up in the process of extrusion and forging, a method of calculating the probability of occurrence and expected intercepted surface area was needed. We have developed a Monte Carlo simulation to determine the distributions of these parameters and have verified the simulated results with observations of ceramic inclusions found in macroscopic slices from extrusions and forgings. Fatigue specimens have been machined from Udimet 720 (a powder metallurgy superalloy) forgings, to determine the effects of the inclusions on fatigue life. The ultimate goal of this study will be to use probabilistic methods to determine the reliability detriment that can be attributed to these ceramic inclusions. This work has been supported by the Ultra Safe and Ultra- Efficient Engine Technologies programs.

Bonacuse, Peter J.↗

It Starts with a Plan: How to Embed Inclusive Diversity into the Fabric of your Organization

Organizations want to be more diverse, but that doesn’t happen with a snap of the fingers. It’s a strategic process. It takes time to lay the foundation and gradually build momentum. For several years at Idaho National Laboratory (INL), a Department of Energy national laboratory headquartered in Idaho Falls, Idaho, numbers of underrepresented employees had remained stagnate despite efforts to increase inclusive diversity. But things began to change in October 2015 when Dr. Mark Peters became INL’s director. Culture changes like increasing diversity and inclusion in an organization take time, but Dr. Peters didn’t want to wait. He wanted to do it faster and better than ever before. Dr. Peters recognized the value an inclusive workforce brings to organizations, and particularly in scientific research and development, it’s not something just to aspire to, it’s a necessity. Research shows that workplaces with high inclusion and diversity elements perform better. A 2013 Deloitte University study of 10 industries with over 3,000 respondents of different ages, genders, races/ethnicities and orientations found inclusion not only drives business performance and market share, but also increases individual performance. People do their best work when they’re able to be their best selves; when they are celebrated, not simply tolerated. In the past, the laboratory had valued diversity, but only in recent years has the organization moved from having an affinity with diversity to incorporating strategic inclusive diversity into fundamental laboratory goals. Why the change? When Toni L. Coleman Carter became INL’s Inclusion and Diversity strategy director in October 2016, her first task was to review INL’s demographic data and to create an Inclusion and Diversity (I/D) strategy. From this process, she created a comprehensive I/D strategy aligned to our Laboratory Plan and Agenda (business strategy) and embedded it into our People Strategy. The I/D primary focus is to widen our talent circle and develop employees by fostering an inclusive environment where everyone can develop, grow and maximize their potential. Our enhanced I/D strategy is embedded in everything we do, including requisitions and job postings. Here for instance we’ve added language to our job postings to include “Women and People of Color are strongly encouraged to apply.” In working through the strategy elements, four keys for success emerged: 1) Get executives on board. Convert executives from lukewarm supporters to visible advocates. 2) Reinforce inclusion with targeted internal and external branding. 3) Change the way you think about recruiting. Everyone at your company can be a brand ambassador and recruiter. 4) Communicate, communicate, communicate. Use communications to educate employees about inclusion and get everyone on the same page. 5) Measure everything. Use transparent demographics and intentional action.

99 GENERAL AND MISCELLANEOUS↗

Evolution Mechanism of Oxide Inclusions in Titanium-Stabilized AISI 443 Stainless Steel

The evolution mechanism of oxide inclusions in Ti-bearing AISI 443 stainless steel was investigated by industrial experiment and thermodynamic calculation. The chemical compositions of steel and the characteristics of inclusions in steel were analyzed. After the addition of Al, the main type of inclusions in molten steel was irregular MgO·Al{sub 2}O{sub 3} spinel. The MgO·Al{sub 2}O{sub 3} inclusions were modified to be spherical CaO-Al{sub 2}O{sub 3}-MgO inclusions after calcium treatment. Thermodynamic calculation results indicated that several ppm Ca could significantly expand the liquid oxide phase field and decrease the stability of spinel. After titanium addition, two types of inclusions were formed: spherical Al{sub 2}O{sub 3}-TiO{sub x} inclusions and complex CaO-TiO{sub x}-Al{sub 2}O{sub 3}-MgO inclusions. The compositions of steel after Ti addition were mostly located in Al{sub 2}O{sub 3}-TiO{sub x} stability phase field. Based on the characteristics of inclusions in steel and thermodynamic calculation, inclusions consisting of liquid and CaTiO{sub 3} were formed in molten steel with more than 10 ppm Ca during the Ti addition process. The evolution mechanism of oxide inclusions was discussed with the consideration of the initial calcium content before Ti addition.

36 MATERIALS SCIENCE↗

Inclusion Characterization in Aluminum-Deoxidized Special Steel with Certain Sulfur Content Under Combined Influences of Slag Refining, Calcium Treatment, and Reoxidation

Inclusions in Al-killed steel with [S] of about 0.0060 to 0.0070 mass pct were characterized and discussed, evaluating the combined effects of basic slag refining and Ca treatment in ladle, together with reoxidation of liquid steel in casting tundish. Inclusions were changed from Al{sub 2}O{sub 3} to MgO-Al{sub 2}O{sub 3} spinel and then to MgO-Al{sub 2}O{sub 3}-CaO during basic slag refining. After Ca treatment, many (MgO-Al{sub 2}O{sub 3}) + CaS inclusions were formed, featuring the coexistence of MgO-Al{sub 2}O{sub 3} and CaS to form a dual-phased structure. In the following Ar blowing, the number density of (MgO-Al{sub 2}O{sub 3}) + CaS inclusions and pure CaS increased obviously, which implied that [Ca] preferentially reacted with [S] rather than [O] in steel. Reoxidation in casting tundish caused the pickup of oxygen in steel, and the rise of total oxygen (T.O) was 0.0002 mass pct; even 55t steel has been poured. As a result, the content of CaO in inclusions increased and MgO-Al{sub 2}O{sub 3}-CaO inclusions were formed again. Thermodynamic calculations revealed that the driving force was strong for the formation of CaS-based inclusions. Higher carbon content in steel would help to reduce oxygen content while enhancing the activity of [S] in steel, which further stabilized the existence of CaS-based inclusions. Therefore, inclusions were mostly the solid (MgO-Al{sub 2}O{sub 3}) + CaS dual-phase ones, without the formation of liquid calcium aluminates. Contents of CaS and CaO in inclusions were affected by the [mass pct S]/[mass pct O] ratio, which was calculated as about 4.58 K and 5.34 K at 1873 K and 1823 K, respectively. This finding implied that lower oxygen was not favorable to prevent the solid inclusions in the calcium treatment of high carbon special steel.

36 MATERIALS SCIENCE↗

Entrapment of Inclusions by Solidified Hooks at the Subsurface of Ultra-Low-Carbon Steel Slab

To understand the mechanism for the entrapment of non-metallic inclusions by curved hooks beneath the surface of continuous casting slabs, the etching of the slab, the observation of hooks and the detection of inclusions on sections vertical and parallel to the slab surface were performed. The location of inclusions and hooks was revealed, and forces acting on the inclusion below a hook were analyzed. Inclusions gathered more below the curved hook than in the overflow zone above the hook. From the observation of hooks and inclusions on sections vertical to the slab surface, the number density of 3 to 5 μm inclusions in the hook zone and no-hook zone was very close, while the number density of > 10 μm inclusions in the hook zone was larger than that in the no-hook zone. From the observation on sections parallel to the slab surface, > 20 μm inclusions were located near the hook line more than in other regions, and the number density of inclusions in the hook zone was more than that in the no-hook zone. The apparent friction coefficient dominated the critical capturing size of inclusions from the solidification front, and the deflection angle, flow velocity, sulfur content and solidification velocity had influences on the size range.

36 MATERIALS SCIENCE↗

Formation of distinct inclusion bodies by inhibition of ubiquitin-proteasome and autophagy-lysosome pathways

Research highlights: {yields} Distinct inclusion bodies are developed by inhibition of UPP and ALP. {yields} The inclusion bodies differ in morphology, localization and formation process. {yields} The inclusion bodies are distinguishable by the localization of TSC2. {yields} Inhibition of both UPP and ALP simultaneously induces those inclusion bodies. -- Abstract: Accumulation of misfolded proteins is caused by the impairment of protein quality control systems, such as ubiquitin-proteasome pathway (UPP) and autophagy-lysosome pathway (ALP). In this study, the formation of inclusion bodies was examined after the blockade of UPP and/or ALP in A549 cells. UPP inhibition induced a single and large inclusion body localized in microtubule-organizing center. Interestingly, however, ALP inhibition generated dispersed small inclusion bodies in the cytoplasm. Tuberous sclerosis complex 2 was selectively accumulated in the inclusion bodies of UPP-inhibited cells, but not those of ALP-inhibited cells. Blockade of transcription and translation entirely inhibited the formation of inclusion body induced by UPP inhibition, but partially by ALP inhibition. Moreover, the simultaneous inhibition of two protein catabolic pathways independently developed two distinct inclusion bodies within a single cell. These findings clearly demonstrated that dysfunction of each catabolic pathway induced formation and accumulation of unique inclusion bodies on the basis of morphology, localization and formation process in A549 cells.

60 APPLIED LIFE SCIENCES↗

Fluid Inclusions in Extraterrestrial Samples Fact or Fiction?

Over the years there have been numerous reports of liquid inclusions in meteorites. Roedder reviews the reported occurrences of liquid inclusions in meteorites and states that "silicate-melt inclusions are expectable and apparently ubiquitous, but the presence of actual liquid inclusions (i.e., with moving bubbles at room temperature) would seem almost impossible." The reason for this conclusion is that meteorites (presumably) form in space at high temperatures and very low pressures where liquid water (or carbon dioxide) is not stable. Perhaps the most infamous report of fluid inclusions in meteorites was that of Warner et al. In that study, the authors reported the presence of two-phase, liquid-vapor inclusions in a diogenite from Antarctica. This report of fluid inclusions generated considerable interest in the meteorite community, and caused many to question existing models for the origin of the diogenites. This interest was short-lived however, as later investigations of the same samples showed that the inclusions were most likely artifacts. Rudnick et al. showed that many of the inclusions in meteorites prepared at the Johnson Space Center contained a fluid that fluoresced strongly under the laser beam on the Raman microprobe. They interpreted this to indicate that the inclusions contained Almag oil used in the preparation of thin sections. Presumably, the Almag oil entered empty vesicles along fractures that were opened intermittently during cutting. Here, the occurrence of unambiguous fluid inclusions that could not have been introduced during sample preparation are described in samples from two different extraterrestrial environments. One environment is represented by the SNC (martian) meteorites ALH 84001 and Nakhla. The second environment is represented by the Monahans 1998 meteorite that fell recently in the USA.

Bodnar, R. J.↗

Ceramic Inclusions In Powder Metallurgy Disk Alloys: Characterization and Modeling

Powder metallurgy alloys are increasingly used in gas turbine engines, especially as the material chosen for turbine disks. Although powder metallurgy materials have many advantages over conventionally cast and wrought alloys (higher strength, higher temperature capability, etc.), they suffer from the rare occurrence of ceramic defects (inclusions) that arise from the powder atomization process. These inclusions can have potentially large detrimental effect on the durability of individual components. An inclusion in a high stress location can act as a site for premature crack initiation and thereby considerably reduce the fatigue life. Because these inclusions are exceedingly rare, they usually don't reveal themselves in the process of characterizing the material for a particular application (the cumulative volume of the test bars in a fatigue life characterization is typically on the order of a single actual component). Ceramic inclusions have, however, been found to be the root cause of a number of catastrophic engine failures. To investigate the effect of these inclusions in detail, we have undertaken a study where a known population of ceramic particles, whose composition and morphology are designed to mimic the 'natural' inclusions, are added to the precursor powder. Surface connected inclusions have been found to have a particularly large detrimental effect on fatigue life, therefore the volume of ceramic 'seeds' added is calculated to ensure that a minimum number will occur on the surface of the fatigue test bars. Because the ceramic inclusions are irregularly shaped and have a tendency to break up in the process of extrusion and forging, a method of calculating the probability of occurrence and expected intercepted surface and embedded cross-sectional areas were needed. We have developed a Monte Carlo simulation to determine the distributions of these parameters and have verified the simulated results with observations of ceramic inclusions found in macro slices from extrusions and forgings. The ultimate goal of this study will be to use probabilistic methods to determine the reliability detriment that can be attributed to these ceramic inclusions.

Bonacuse, Pete↗

Experimental Simulation of Shock Reequilibration of Fluid Inclusions During Meteorite Impact

Fluid inclusions are microscopic volumes of fluid trapped within minerals as they precipitate. Fluid inclusions are common in terrestrial minerals formed under a wide array of geological settings from surface evaporite deposits to kimberlite pipes. While fluid inclusions in terrestrial rocks are the rule rather than the exception, only few fluid inclusion-bearing meteorites have been documented. The rarity of fluid inclusions in meteoritic material may be explained in two ways. First, it may reflect the absence of fluids (water?) on meteorite parent bodies. Alternatively, fluids may have been present when the rock formed, but any fluid inclusions originally trapped on the parent body were destroyed by the extreme P-T conditions meteorites often experience during impact events. Distinguishing between these two possibilities can provide significant constraints on the likelihood of life on the parent body. Just as textures, structures, and compositions of mineral phases can be significantly altered by shock metamorphism upon hypervelocity impact, fluid inclusions contained within component minerals may be altered or destroyed due to the high pressures, temperatures, and strain rates associated with impact events. Reequilibration may occur when external pressure-temperature conditions differ significantly from internal fluid isochoric conditions, and result in changes in fluid inclusion properties and/or textures. Shock metamorphism and fluid inclusion reequilibration can affect both the impacted target material and the meteoritic projectile. By examining the effects of shock deformation on fluid inclusion properties and textures we may be able to better constrain the pressure-temperature path experienced by shocked materials and also gain a clearer understanding of why fluid inclusions are rarely found in meteoritic samples.

Madden, M. E. Elwood↗

Simultaneous Modification of Alumina and MgO·Al{sub 2}O{sub 3} Inclusions by Calcium Treatment During Electroslag Remelting of Stainless Tool Steel

Calcium modification of both alumina and MgO·Al{sub 2}O{sub 3} inclusions during protective gas electroslag remelting (P-ESR) of 8Cr17MoV stainless steel and its effect on nitrides and primary carbides were studied by analyzing the transient evolution of oxide and sulfide inclusions in the P-ESR process. The oxide inclusions that were not removed during P-ESR without calcium treatment were found to retain their original state until in as-cast ingot. Calcium treatment modified all MgO·Al{sub 2}O{sub 3} and alumina inclusions that had not been removed in the P-ESR process to liquid/partially liquid CaO-Al{sub 2}O{sub 3}-(MgO) with uniformly distributed elements, in addition to a small proportion of partially modified inclusions of a CaO-MgO-Al{sub 2}O{sub 3} core surrounded by a liquid CaO-Al{sub 2}O{sub 3}. The modification of low-MgO-containing MgO·Al{sub 2}O{sub 3} inclusions involves the preferential reduction of MgO from the MgO·Al{sub 2}O{sub 3} inclusion by calcium and the reaction of calcium with Al{sub 2}O{sub 3} in the inclusion. It is the incomplete/complete reduction of MgO from the spinel by calcium that contributes to the modification of spinels. Alumina inclusions were liquefied by direct reaction with calcium. Calcium treatment during P-ESR refining also provided an effective approach to prevent the formation of nitrides and primary carbides in stainless steel through modifying their preferred nucleation sites (alumina and MgO·Al{sub 2}O{sub 3} inclusions) to calcium aluminates, which made no contribution to improving the steel cleanliness.

36 MATERIALS SCIENCE↗

Investigation of RE-O-S-As Inclusions in High Carbon Steels

The formation of RE-O-S-As inclusions is an inevitable issue when rare earth (RE) elements are used to modify the existing state of residual element arsenic. The evolution process of La-O-S-As inclusions in high carbon steels was investigated under conditions of different La contents. An in-situ sample preparation method was used to prepare film samples. The results show that it is practical to add RE elements to stabilize arsenic by generating As-bearing RE inclusions. A new type of As-bearing RE inclusion was discovered and identified as LaAsO{sub 4}. As La content increased from 0.003 to 0.089 wt pct, the dominant inclusions of the La-O-S-As system changed from La{sub 2}O{sub 3} to La{sub 2}O{sub 2}S, then to La{sub 2}O{sub 2}S-LaAsO{sub 4}, and finally to LaAsO{sub 4}. A full model of the inclusion formation of the RE-O-S-As system was also established to describe what kind of inclusion to form in conditions of different atomic ratios of RE/O and RE/S. The first As-bearing RE inclusion is RE-O-As or RE-S-As, and RE-O-S-As inclusions can be controlled to form certain inclusions that make O and S useful to modify the existing state of arsenic.

36 MATERIALS SCIENCE↗

Automated Classification and Analysis of Non-metallic Inclusion Data Sets

The aim of this study is to utilize principal component analysis (PCA), clustering methods, and correlation analysis to condense and examine large, multivariate data sets produced from automated analysis of non-metallic inclusions. Non-metallic inclusions play a major role in defining the properties of steel and their examination has been greatly aided by automated analysis in scanning electron microscopes equipped with energy dispersive X-ray spectroscopy. The methods were applied to analyze inclusions on two sets of samples: two laboratory-scale samples and four industrial samples from a near-finished 4140 alloy steel components with varying machinability. The laboratory samples had well-defined inclusions chemistries, composed of MgO-Al{sub 2}O{sub 3}-CaO, spinel (MgO-Al{sub 2}O{sub 3}), and calcium aluminate inclusions. The industrial samples contained MnS inclusions as well as (Ca,Mn)S + calcium aluminate oxide inclusions. PCA could be used to reduce inclusion chemistry variables to a 2D plot, which revealed inclusion chemistry groupings in the samples. Clustering methods were used to automatically classify inclusion chemistry measurements into groups, i.e., no user-defined rules were required.

36 MATERIALS SCIENCE↗

Study on Formation Mechanism of CaO-SiO{sub 2}-Based Inclusions in Saw Wire Steel

Attempts were made to elucidate the formation mechanism of CaO-SiO{sub 2}-based inclusions in saw wires by both laboratory experiments and industrial trials. The key point was to make clear the origin of CaO in such oxide inclusions. Probable origins of [Ca] in steel were first discussed, which can be taken into steel from the steel-slag reaction or ferrous alloy. As a result, slag-steel chemical reaction equilibrium was carefully evaluated at 1873 K (1600 °C) to classify the changes of dissolved aluminum ([Al]), total magnesium (Mg), and total calcium (Ca) in steel and the caused composition variations of inclusions. With the rise of slag basicity from 0.5 to 1.8, [Al] was remarkably increased from 0.00045 to 0.00139 mass pct, whereas Mg varied in the range of 0.00038 to 0.00048 mass pct. By contrast, Ca was constantly kept below 0.00003 mass pct. Accordingly, Al{sub 2}O{sub 3} and MgO in inclusions witnessed obvious rises from 5 to 23 mass pct and from 2 to 8 mass pct, respectively. By contrast, inclusions were free of CaO when slag basicity was below 1.5. With slag basicity further increased to 1.8, CaO witnessed a negligible rise to only 1.0 mass pct on average. This phenomenon agreed well with thermodynamic calculations, which revealed that chemical reaction between steel and CaO in slag (for example, between [Si] and CaO) was weak to hardly supplying sufficient [Ca] to steel to increase CaO in inclusions. Ca contained in ferrous alloys as contaminations was not the cause of CaO-SiO{sub 2}-based inclusions, either. The industrial trial results indicated that CaO-SiO{sub 2}-based inclusions have been readily produced in short time just after BOF tapping. Also, a percentage of them changed slightly with the proceeding of refining. Based on the good agreement of laboratory, industrial, and thermodynamics calculations results, it can be reasonably concluded that CaO-SiO{sub 2}-based inclusions in saw wire were exogenous particles from entrapped/emulsified top slag, but not products of slag-steel-inclusion chemical reactions.

36 MATERIALS SCIENCE↗

Effects of Reoxidation of Liquid Steel and Slag Composition on the Chemistry Evolution of Inclusions During Electroslag Remelting

Electroslag remelting (ESR) is increasingly used to produce some varieties of special steels and alloys, mainly because of its ability to provide extreme cleanliness and an excellent solidification structure simultaneously. In the present study, the combined effects of varying SiO{sub 2} contents in slag and reoxidation of liquid steel on the chemistry evolution of inclusions and the alloying element content in steel during ESR were investigated. The inclusions in the steel before ESR refining were found to be oxysulfides of patch-type (Ca,Mn)S adhering to a CaO-Al{sub 2}O{sub 3}-SiO{sub 2}-MgO inclusion. The oxide inclusions in both the liquid metal pool and remelted ingots are CaO-Al{sub 2}O{sub 3}-MgO and MgAl{sub 2}O{sub 4} together with CaO-Al{sub 2}O{sub 3}-SiO{sub 2}-MgO inclusions (slightly less than 30 pct of the total inclusions), which were confirmed to originate from the reduction of SiO{sub 2} from the original oxide inclusions by dissolved Al in liquid steel during ESR. CaO-Al{sub 2}O{sub 3}-MgO and MgAl{sub 2}O{sub 4} are newly formed inclusions resulting from the reactions taking place inside liquid steel in the liquid metal pool caused by reoxidation of liquid steel during ESR. Increasing the SiO{sub 2} content in slag not only considerably reduced aluminum pickup in parallel with silicon loss during ESR, but also suppressed the decrease in SiO{sub 2} content in oxide inclusions. (Ca,Mn)S inclusions were fully removed before liquid metal droplets collected in the liquid metal pool.

36 MATERIALS SCIENCE↗