Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPINGEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

On the impingement of supersonic jet on a normal flat surface

An improved method, based on one strip approximation of the method of integral relations which was reported originally by Belov, Ginzburg and Shub (1973), is presented for the calculation of flow parameters in the impingement region of a supersonic, underexpanded jet striking a normal surface located within the first cell. The results are presented for two impingement conditions and found to be in good agreement with the experimental data.

Pamadi, B. N.↗
NASA NTRS1982

Jet array impingement flow distributions and heat transfer characteristics. Effects of initial crossflow and nonuniform array geometry

Two-dimensional arrays of circular air jets impinging on a heat transfer surface parallel to the jet orifice plate are considered. The jet flow, after impingement, is constrained to exit in a single direction along the channel formed by the jet orifice plate and the heat transfer surface. The configurations considered are intended to model those of interest in current and contemplated gas turbine airfoil midchord cooling applications. The effects of an initial crossflow which approaches the array through an upstream extension of the channel are considered. Flow distributions as well as heat transfer coefficients and adiabatic wall temperatures resolved to one streamwise hole spacing were measured as a function of the initial crossflow rate and temperature relative to the jet flow rate and temperature. Both Nusselt number profiles and dimensionless adiabatic wall temperature (effectiveness) profiles are presented and discussed. Special test results which show a significant reduction of jet orifice discharge coefficients owing to the effect of a confined crossflow are also presented, along with a flow distribution model which incorporates those effects. A nonuniform array flow distribution model is developed and validated.

Florschuetz, L. W.↗
NASA NTRS1982

Solid impingement erosion mechanisms and characterization of erosion resistance of ductile metals

Experimental results pertaining to spherical glass bead and angular crushed glass particle impingement are presented. A concept of energy adsorption to explain the failure of material is proposed. The erosion characteristics of several pure metals were correlated with the proposed energy parameters and with other properties. Correlations of erosion and material properties were also carried out with these materials to study the effect of the angle of impingement. Analyses of extensive erosion data indicate that surface energy, strain energy, melting point, bulk modulus, hardness, ultimate resilience, atomic volume and product of linear coefficient of thermal expansion, bulk modulus, and temperature rise required for melting, and ultimate resilience, and hardness exhibit the best correlations. It appears that both energy and thermal properties contribute to the total erosion.

Rao, V. P.↗
NASA NTRS1984

Beam impingement angle effects on secondary electron emission characteristics of textured pyrolytic graphite

Experimentally determined values of true secondary electron emission and relative values of reflected primary electron yield for untreated and ion-textured pyrolytic graphite over a range of primary electron energy levels and electron beam impingement angles are presented. Information required to develop high efficiency multistage depressed collectors (MDC's) for microwave amplifier traveling-wave tubes for space communication and aircraft applications is provided. To attain the highest possible MDC efficiencies, the electrode surfaces must have low secondary electron emission characteristics. Pyrolytic graphite, a chemically vapor-deposited material, is a particularly promising candidate for this application. The pyrolytic graphite surfaces studied were tested over a range of primary electron beam energies and beam impingement angles from 200 to 2000 eV and direct (0 deg) to near-grazing angles (85 deg), respectively. Surfaces both parallel to and normal to the planes of material deposition were examined. The true secondary electron emission and reflected primary electron yield characteristics of the pyrolytic graphite surfaces are compared to those of sooted control surfaces.

Curren, A. N.↗
NASA NTRS1983

An experimental investigation of the impingement of a planar shock wave on an axisymmetric body at Mach 3

An experimental study of the flow caused by a planar shock wave impinging obliquely on a cylinder is presented. The complex three dimensional shock wave and boundary layer interaction occurring in practical problems, such as the shock wave impingement from the shuttle nose on an external fuel tank, and store carriage interference on a supersonic tactical aircraft were investigated. A data base for numerical computations of complex flows was also investigated. The experimental techniques included pressure measurements and oil flow patterns on the surface of the cylinder, and shadowgraphs and total and static pressure surveys on the leeward and windward planes of symmetry. The complete data is presented in tabular form. The results reveal a highly complex flow field with two separation zones, regions of high crossflow, and multiple reflected shocks and expansion fans.

Brosh, A.↗
NASA NTRS1982

Jet array impingement flow distributions and heat transfer characteristics: Effects of initial crossflow and nonuniform array geometry

Flow distributions and heat transfer characteristics for two-dimensional arrays of circular air jets impinging on a surface parallel to the jet orifice plate were determined. The configurations considered were intended to model those of interest in current and contemplated gas turbine airfoil midchord cooling applications. The geometry of the airfoil applications considered dictates that all of the jet flow, after impingement, exit in the chordwise (i.e., streamwise) direction toward the trailing edge. Experimental results for the effect of an initial crossflow on both flow distributions and heat transfer characteristics for a number of the prior uniform array geometries. The effects of nonuniform array geometries on flow distributions and heat transfer characteristics for noninitial crossflow configurations are discussed.

Florschuetz, L. W.↗
NASA NTRS1985

Results of the SPAS-01 RCS plume impingement test

The Orbiter RCS flowfield is modeled in the free molecular region and an impingement analysis is performed to characterize on-orbit plume interactions with nearby bodies, such as the SPAS-01 satellite. The flow in the far field is treated with a source flow model at any point 40 ft from the nozzle. Impingement is calculated according to Newtonian impact theory. The flow density in the far field is expressed in terms of a conservation of energy equation, with account taken of the expansion of the gas, cooling, and the angular distribution. The SPAS-01 platform gathered data at eight different positions around the Orbiter to test the model predictions. Excellent agreement was obtained in predictions of the torque and rotation rate induced on the SPAS by firing the thrusters.

Lazaron, M. P.↗
NASA NTRS1985

Effect of surface configuration during solid particle impingement erosion

A study of the progression of erosion and its detrimental effects due to solid particle impingement requires a detailed understanding of the erosion process and morphology of real surfaces of ductile metals. A series of experiments was conducted to investigate the erosion characteristics of aluminum alloy surfaces during spherical glass bead and angular crushed glass particle impingement. The effects of particle shape on cylindrical surfaces and surfaces with pre-existing holes and slits were determined. An attempt was made to understand the relationship between erosion rate and pit morphology. Based on the experimental observations, an empirical relationship between erosion rate and volume loss is presented. This technique provides an improved prediction method for a wide spectrum of ductile materials.

Rao, P. V.↗
NASA NTRS1986

A stochastic model for particle impingements on orbiting spacecraft

A general methodology for simulating particle impingements on orbiting spacecraft is developed. Major steps in the modeling process are presented as (1) modeling objective, (2) construction of the spacecraft geometrical model, (3) simulation of the particles in the space environment, (4) particle impact and subsequent events of interest, and (5) results of the simulation. A simulation of the expected meteoroid impingements on the Hubble Space Telescope and the resulting angular momentum transfers which can cause telescope pointing disturbances is given to illustrate these methods.

Howell, L. W., Jr.↗
NASA NTRS1987

Laser Doppler Velocimeter measurements in a 3-D impinging twin-jet fountain flow

Mean velocity and turbulence measurements were conducted on the three dimensional fountain flow field generated by the impingement of two axisymmetric jets on a ground plane with application to vertical takeoff and landing (VTOL) aircraft. The basic instantaneous velocity data were obtained using a two component laser Doppler velocimeter in a plane connecting the nozzle centerlines at different heights above the ground emphasizing the jet impingement region and the fountain upwash region formed by the collision of the wall jets. The distribution of mean velocity components and turbulence quantities, including the turbulence intensity and the Reynolds shear stress, were derived from the basic velocity data. Detailed studies of the characteristics of the fountain revealed self-similarity in the mean velocity and turbulence profiles across the fountain. The spread and mean velocity decay characteristics of the fountain were established. Turbulence intensities of the order of 50% were observed in the fountain.

Saripalli, K. R.↗
NASA NTRS1986

A stochastic model for particle impingements on orbiting spacecraft

A general methodology for simulating particle impingements on orbiting spacecraft is developed. Major steps in the modeling process are presented as (1) modeling objective, (2) construction of the spacecraft geometrical model, (3) simulation of the particles in the space environment, (4) particle impact and subsequent events of interest, and (5) results of the simulation. A simulation of the expected meteoroid impingements on the Hubble Space Telescope and the resulting angular momentum transfers which can cause telescope pointing disturbances is given to illustrate these methods.

Howell, Leonard W., Jr.↗
NASA NTRS1987

Experimental data correlations for the effects of rotation on impingement cooling of turbine blades

The effects of rotation on impingement cooling have been experimentally studied under simulated gas turbine operating conditions. A large scale model of a blade is spun in vacuum. External heating is simulated by resistve dissipation in the thin wall of the model, which is impingement cooled. The local internal Nu is measured by an IR radiometric technique with high spatial resolution. At low rotational speeds the data agree well with published measurements taken under stationary conditions. At higher speeds, a decrease in the average Nu by up to 20-30 percent is observed. Severe gradients are generated near the hub region. Empirical correlations, which fit the data well and render it more useful for design purposes, are presented. Measurements and correlations suggest that rotational effects are very important and can cause premature blade failure.

Kreatsoulas, J. C.↗
NASA NTRS1987

Rotational effects on impingement cooling

The present consideration of rotation effects on heat transfer in a radially exhausted, impingement-cooled turbine blade model gives attention to experimental results for Reynolds and Rossby numbers and blade/coolant temperature ratio values that are representative of small gas turbine engines. On the basis of a model that encompasses the effects of Coriolis force and buoyancy on heat transfer, bouyancy is identified as the cause of an average Nusselt number that is 20-30 percent lower than expected from previous nonrotating data. A heuristic model is proposed which predicts that the impingement jets nearest the blade roots should deflect inward, due to a centripetal force generated by their tangential velocity counter to the blade motion. Potentially serious thermal stresses must be anticipated from rotation effects in the course of blade design.

Epstein, A. H.↗
NASA NTRS1988

Impingement Of Rocket Exhaust

Computer program calculates forces, heating, and contamination. Source Flow Impingement Program (SFPLIMP), a computer program that analyzes impingement of exhaust from several rocket engines on nearby surfaces in vacuum. Designed to calculate quickly undesired forces, heating, and contamination caused by firing attitude-control jets toward other surfaces of controlled spacecraft.

Drake, Bret G.↗
NASA NTRS1988

Numerical study of unsteady viscous hypersonic blunt body flows with an impinging shock

A complex two-dimensional, unsteady, viscous hypersonic shock wave interaction is numerically simulated by a high-resolution, second-order fully implicit shock-capturing scheme. The physical model consists of a nonstationary oblique shock impinging on the bow shock of a blunt body. Studies indicated that the unsteady flow patterns are slightly different from their steady counterparts. However, for the sample cases investigated the peak surface pressures for the unsteady flows seem to occur at very different impingement locations than for the steady flow cases.

Klopfer, G. H.↗
NASA NTRS1989

Numerical study of unsteady viscous hypersonic blunt body flows with an impinging shock

A complex two-dimensional, unsteady, viscous hypersonic shock wave interaction is numerically simulated by a high-resolution, second-order fully implicit shock-capturing scheme. The physical model consists of a nonstationary oblique shock impinging on the bow shock of a blunt body. Studies indicate that the unsteady flow patterns are slightly different from their steady counterparts. However, for the sample cases investigated the peak surface pressures for the unsteady flows seem to occur at very different impingement locations than for the steady flow cases.

Klopfer, G. H.↗
NASA NTRS1990

Computing Impingements Of Rocket Exhausts

SFPLIMP, Source Flow Plume Impingement Program, computes forces, moments, contamination, and heating rates caused by impingement of plumes on orbiting spacecraft from jets firing at high altitudes. User chooses among variety of configurations, data, and theories. Written in FORTRAN 77 and VAX DCL.

Cerimele, M.↗
NASA NTRS1989

Assessment of impingement effects in the isentropic core of a small satellite control thruster plume

Two computational techniques commonly employed in the calculation of rocket and thruster expansion plumes are assessed. These are the method of characteristics (MOC), which is derived from the continuum Euler equations, and the direct simulation Monte Carlo (DSMC) method, which adopts a discrete particle approach. These techniques vary both in the computational expense and in the accuracy and detail of the solutions that they provide, depending upon the regime of application. The assessment is made with reference to the plume expanding from a small monopropellant hydrazine thruster and concentrates on the isentropic core of the jet for the flow regime lying between the continuum and free molecular limits. It is found that the more numerically intensive DSMC method offers the better correspondence to the available experimental data. In addition, large differences in typical impingement effects such as drag force and heat transfer are found at the free molecular limit of the plume expansion for the two predictive techniques. It is concluded that accurate estimation of impingement potential may only be achieved through application of the discrete particle method.

Boyd, I. D.↗