Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “I:C”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

A measurement of the (C-12)O/(C-13)O) ratio in the mesosphere of Venus

Measurements of the absorptions in the Venus atmosphere by (C-12)O and (C-13)O in the J = 1-2 microwave, rotational transitions are reported. Radiative transfer models were fitted to the spectra in order to estimate the isotopic ratio (C-12)O/(C-13)O = 185. Based on an extensive error analysis it is suggested that the standard deviation of this value is + or - 69. This result applies to the mesosphere of Venus, i.e., from about 80 to 110 km. Values of the (C-12)O/(C-13)O ratio measured deeper in the Venus atmosphere are closer to the terrestrial value of 89. Several possible, qualitative mechanisms to explain the higher value of (C-12)O/(C-13)O found for the nightside mesosphere of Venus are offered.

Clancy, R. T.↗
DOE OSTI2023

Projections of wildfire risk and activities under 1.5 °C and 2.0 °C global warming scenarios

Wildfires are important ecosystem processes that have a significant impact on terrestrial vegetation, environment, and climate. This study investigates how future wildfire risk and activities could change under 1.5 °C and 2.0 °C warming scenarios relative to pre-industrial levels using a modified McArthur Forest Fire Danger Index (FFDIn) and the CLM4.5-BGC land surface model. Sixteen Earth System Models (ESMs) from CMIP5 and CMIP6 were employed to supply the variables of climate change under low, middle, and high greenhouse emission scenarios in the 1.5 °C and 2.0 °C scenarios. The ensemble means from the FFDIn and results from the CLM4.5-BGC with multiple forcings show that the dry areas in the southwestern US, Brazilian Highlands, and Arabian islands are projected to face higher wildfire risk with larger burned areas and more carbon emissions under a warmer climate. The Congo Basin and part of the Amazon could have a lower wildfire risk with smaller burned areas and less carbon emissions. The absolute changes in the projected FFDIn are small, although large increases are observed in boreal areas, particularly in the winter and spring. Burned area and carbon emissions are projected to increase in general in the boreal area but decrease in northeastern Asia. Compared to the 1.5 °C scenario, the wildfire risk and burned area levels are projected to increase under the 2.0 °C scenario except in the western Amazon. However, fire carbon emissions are projected to decrease more in tropical areas under the 2.0 °C scenario. The different change directions in eastern North America and eastern China produced by the FFDIn and CLM4.5-BGC suggest the potential effect of non-meteorological elements on fire activities.

1.5 °C and 2.0 °C warming↗
DOE OSTI2021

High-resolution crystal structure of the Borreliella burgdorferi PlzA protein in complex with c-di-GMP: new insights into the interaction of c-di-GMP with the novel xPilZ domain

ABSTRACT In the tick-borne pathogens, Borreliella burgdorferi and Borrelia hermsii, c-di-GMP is produced by a single diguanylate cyclase (Rrp1). In these pathogens, the Plz proteins (PlzA, B and C) are the only c-di-GMP receptors identified to date and PlzA is the sole c-di-GMP receptor found in all Borreliella isolates. Bioinformatic analyses suggest that PlzA has a unique PilZN3-PilZ architecture with the relatively uncommon xPilZ domain. Here, we present the crystal structure of PlzA in complex with c-di-GMP (1.6 Å resolution). This is the first structure of a xPilz domain in complex with c-di-GMP to be determined. PlzA has a two-domain structure, where each domain comprises topologically equivalent PilZ domains with minimal sequence identity but remarkable structural similarity. The c-di-GMP binding site is formed by the linker connecting the two domains. While the structure of apo PlzA could not be determined, previous fluorescence resonance energy transfer data suggest that apo and holo forms of the protein are structurally distinct. The information obtained from this study will facilitate ongoing efforts to identify the molecular mechanisms of PlzA-mediated regulation in ticks and mammals.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1988

Detection of C-13O radio emission from C-13-rich carbon stars

A high ratio of C-13O radio emission in the J = 1-0 rotational line has been detected from three mass-losing carbon stars which optical data indicate have high C-13/C12 ratios. Since chemical fractionation, isotope-dependent photodissociation and opacity in the rotational and vibrational lines may not raise significantly the C-13O ratio above the actual C-13/C-12 ratio in these circumstellar envelopes, the relative abundance of C-13 in these stars might be even greater by perhaps a factor of two than previously believed. About 15 percent of all luminous carbon stars are C-13-rich, and these stars may play a significant role in the enhancement in the C-13/C12 ratio that has occurred during the past 4.6 billion years since the formation of the sun.

Jura, M.↗
DOE OSTI2023

Amplitude analysis of the Λ c + → p K - π + decay and Λ c + baryon polarization measurement in semileptonic beauty hadron decays

An amplitude analysis of Λ c + → p K - π + decays together with a measurement of the Λ c + polarization vector in semiōleptonic beauty hadron decays is presented. A sample of 400 000 candidates is selected from proton-proton collisions recorded by the LHCb detector at a center-of-mass energy of 13 TeV. An amplitude model is developed and the resonance fractions as well as two- and three-body decay parameters are reported. The mass and width of the $Λ$(2000) state are also determined. A significant Λ c + polarization is found. A large sensitivity of the Λ c + → p K - π + decay to the polarization is seen, making the amplitude model suitable for Λ c + polarization measurements in other systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Search for h c → π + π − J / ψ via ψ ( 3686 ) → π 0 h c

Using ( 2712.4 ± 14.3 ) × 10 6 ψ ( 3686 ) events collected with the BESIII detector operating at the BEPCII collider, we search for the hadronic transition h c → π + π − J / ψ via ψ ( 3686 ) → π 0 h c . No significant signal is observed. We set the most stringent upper limits to date on the branching fractions B ( ψ ( 3686 ) → π 0 h c ) × B ( h c → π + π − J / ψ ) and B ( h c → π + π − J / ψ ) at the 90% confidence level, which are determined to be 6.7 × 10 − 7 and 9.4 × 10 − 4 , respectively. Published by the American Physical Society 2024

Ablikim, M.↗
DOE OSTI2023

Gapless spinons and a field-induced soliton gap in the hyperhoneycomb Cu oxalate framework compound [(C 2 H 5 ) 3 NH] 2 Cu 2 (C 2 O 4 ) 3

Here, we report a detailed study of the specific heat and magnetic susceptibility of single crystals of a spin-liquid candidate: the hyperhoneycomb Cu oxalate framework compound [(C 2 H 5 ) 3 NH] 2 Cu 2 (C 2 O 4 ) 3 . The specific heat shows no anomaly associated with a magnetic transition at low temperatures down to T ~ 180 mK in zero magnetic field. We observe a large linear-in-T contribution to the specific heat γT, γ = 98 (1) mJ / mol K 2 , at low temperatures, indicative of the presence of fermionic excitations despite the Mott insulating state. The low-T specific heat is strongly suppressed by applied magnetic fields H, which induce an energy gap, Δ(H), in the spin-excitation spectrum. We use the four-component relativistic density-functional theory (DFT) to calculate the magnetic interactions, including the Dzyaloshinskii-Moriya antisymmetric exchange, which causes an effective staggered field acting on one copper sublattice. The magnitude and field dependence of the field-induced gap, Δ (H) ∝ H 2/3 , are accurately predicted by the soliton mass calculated from the sine-Gordon model of weakly coupled antiferromagnetic Heisenberg chains with all parameters determined by our DFT calculations. Thus our experiment and calculations are entirely consistent with a model of [(C 2 H 5 ) 3 NH] 2 Cu 2 (C 2 O 4 ) 3 in which anisotropic magnetic exchange interactions due to Jahn-Teller distortion cause one copper sublattice to dimerize, leaving a second sublattice of weakly coupled antiferromagnetic chains. We also show that this model quantitatively accounts for the measured temperature-dependent magnetic susceptibility. Thus [(C 2 H 5 ) 3 NH] 2 Cu 2 (C 2 O 4 ) 3 is a canonical example of a one-dimensional spin-1/2 Heisenberg antiferromagnet and not a resonating-valence-bond quantum spin liquid, as previously proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Measurement of the absolute branching fraction of the three-body decay Λ c + → Ξ 0 K + π 0 and search for Λ c + → n K + π 0 , Σ 0 K + π 0 , and Λ K + π 0

The Cabbibo-favored decay Λ c + → Ξ 0 K + π 0 is studied for the first time using 6.1 fb − 1 of e + e − collision data at center-of-mass energies between 4.600 and 4.840 GeV, collected with the BESIII detector at the BEPCII collider. With a double-tag method, the branching fraction of the three-body decay Λ c + → Ξ 0 K + π 0 is measured to be ( 7.79 ± 1.46 ± 0.95 ) × 10 − 3 , where the first and second uncertainties are statistical and systematic, respectively. The branching fraction of the two-body decay Λ c + → Ξ ( 1530 ) 0 K + is ( 5.99 ± 1.04 ± 0.32 ) × 10 − 3 , which is consistent with the previous result of ( 5.02 ± 0.99 ± 0.31 ) × 10 − 3 . In addition, the upper limit on the branching fraction of the doubly Cabbibo-suppressed decay Λ c + → n K + π 0 is 7.1 × 10 − 4 at the 90% confidence level. The upper limits on the branching fractions of Λ c + → Σ 0 K + π 0 and Λ K + π 0 are also determined to be 1.8 × 10 − 3 and 2.0 × 10 − 3 , respectively. Published by the American Physical Society 2024

Ablikim, M.↗
DOE OSTI2023

Long‐Range Confinement‐Driven Enrichment of Surface Oxygen‐Relevant Species Promotes C−C Electrocoupling in CO 2 Reduction

Abstract CO 2 reduction is a highly attractive route to transform CO 2 into useful feedstocks, of which C 2 products are more desired than C 1 , yet face high kinetic barriers of C−C electrocoupling. Here, the engineering of pore‐enabled local confinement reaction environments is reported for tuning the enrichment of surface‐adsorbed oxygen‐relevant species and the establishment of their pronounced benefits in promoting C−C coupling over oxide‐derived Cu‐based catalysts. A new approach of utilizing the microphase separation of a block copolymer is developed to fabricate bicontinuous mesoporous CuO nanofibers (CuO‐BPNF). The enhanced confinement from long‐range mesochannels enables the adsorption of OH ad /O ad on the Cu surface at a wide negative potential range of −0.7 – −1.3 V in CO 2 reduction, which cannot be achieved over conventional deficient and short‐range pores. Constant‐potential DFT calculations reveal that the surface‐bound oxygen species weakens *CO affinity with the Cu (111) surface and lowers the kinetic barriers for both *CO−CO dimerization and *CO hydrogenation to enable *CO−CHO coupling. Accordingly, a CO 2 ‐to‐C 2 Faradaic efficiency of 74.7% over CuO‐BPNF is shown, significantly larger than counterparts with conventional pores. This work offers a general design principle of confinement engineering to manage the adsorption of reactive species for steering reaction pathways in interfacial catalysis.

Chemistry↗
DOE OSTI2026

Insights into Nonelectroactive C–C Bond Formation on Cu(100) during Electrochemical CO 2 Reduction from Multiconfigurational Wavefunction Theory

Carbon–carbon (C–C) bond formation is necessary for hydrocarbon (and oxygenate) synthesis beyond methane (and formate/formic acid) during electrochemical CO and CO 2 reduction (ECOR and ECO 2 R). Cu has notable ability to form hydrocarbons compared to other pure metals. In particular, the (100) facet of face-centered cubic Cu forms ethylene competitively with H 2 and methane during both ECOR and ECO 2 R. Past simulations based on density functional theory (DFT) with standard exchange-correlation functional approximations predict fast nonelectroactive C–C bond formation channels involving adsorbed (*) CO together with another *CO, formyl (*CHO), or hydroxymethylidyne (*COH), forming OC*–*CO, OC*–CHO*, and OC*–*COH, respectively. Such simulations support the prevailing hypothesis that emergence of C 2 products is kinetically determined at the early stages of the reduction chemistry. Here we show, via simulations with more accurate many-body, i.e., “correlated”, wavefunction theory (enabled by an embedding scheme), that the coupling of *CO with a *CO or a *COH (previously predicted at the same level of theory to kinetically dominate over *CHO as the one-electron reduction product of *CO) is highly activated (kinetically impeded), with free energy barriers >1 eV, in contradiction to previous DFT-based simulations. Intriguingly, we find that the coupling of two adjacent *COHs incurs only a small barrier (<0.3 eV) and is exoergic (< –1 eV); however, given the predicted low surface mobility of *COH, the emergence of HOC*–*COH is also improbable, at least at low *COH coverages. We therefore conclude that it is highly unlikely for *CO to participate in nonelectroactive C–C bond formation on pristine Cu(100), contrary to conventional wisdom, and that the energetically favorable *COH dimerization may occur only after substantial buildup of *COH on the surface.

adsorption↗
DOE OSTI2023

U–C Bond Insertion, Ring-Opening, and C–H Activation in a Uranium Bis(diisopropylamino)cyclopropenylidene (BAC) Adduct

Reaction of [U(NR 2 ) 3 ] (R = SiMe 3 ) with 1 equiv of bis(diisopropylamino)cyclopropenylidene (BAC) in Et 2 O results in the formation of [(NR 2 ) 3 U(BAC)] (1), which can be isolated in modest yields. Thermolysis of 1 in C 6 D 6 at 85 °C results in the formation of the ring-opened U(IV) product, [(NR 2 ) 2 U{N(R)(SiMe 2 CH=C(NiPr 2 )C(NiPr 2 )=CH)}] (2), which can be isolated in low yields. Mechanistic studies suggest that the formation of 2 proceeds via dissociation of BAC from 1 to regenerate [U(NR 2 ) 3 ], which converts into [U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] at the elevated temperatures. BAC then inserts into the U–C bond of [U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] to generate a cyclopropenyl intermediate, which undergoes ring opening and C–H activation to afford the final product, 2. We hypothesize that the ring-opening generates an unobserved carbene intermediate. Notably, thermolysis of a 1:1 mixture of independently prepared [U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] and BAC results in clean formation of 2, providing strong support for the proposed mechanism. The formulations of both 1 and 2 were confirmed by X-ray crystallography. Finally, theoretical calculations indicate that the hypothesized uranium carbene intermediate features strong U–C bonding, potentially with some carbyne character in the electronic structure.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Force-Modulated C–C Reductive Elimination from Nickel Bis(polyfluorophenyl) Complexes

We have analyzed the rate of C(sp 2 )–C(sp 2 ) reductive elimination from nickel(II) bis(2,4,6-trifluorophenyl) complex-es (P–P)Ni(2,4,6-C 6 H 2 F 3 ) 2 containing either MeOBiPhep (3a) or macrocyclic bisphosphine ligand (3b-3e) as a func-tion of force applied to the biaryl backbone of these ligands through intramolecular tension generated by a molecular force probe. Nickel complexes 3 were isolated in 22-60% yield from reaction of bisphosphine with the bis(tetrahydrofuranyl) complex (THF) 2 Ni(2,4,6-C 6 H 2 F 3 ) 2 followed by chromatography. Thermolysis of complexes 3 in C 6 D 6 at 68 °C leads to first-order decay through > 3 half-lives to form 2,2',4,4',6,6'-hexaflurorobiphenyl as the exclusive fluorine-containing product in ≥93% yield. Whereas compressive forces up to –65 pN have no significant effect on the rate of reductive elimination, extension forces increase the rate of reductive elimination by a factor of three over a ~230 pN range of restoring forces relative to the strain-free MeOBiphep complex. Furthermore, the rate response of reductive elimination from nickel(II) bis(trifluorophenyl) complexes as a function of extension force is similar to the previously reported 2.8-fold increase in the rate of reductive elimination from platinum diaryl complexes (P–P)Pt(4-C 6 H 4 NMe 2 ) 2 over the same range of forces

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Controlling Selective C–O and C–H Bond Scission of Methanol by Supporting Pt on TiN and Mo 2 N Model Surfaces and Powder Catalysts

Transition metal nitrides (TMNs) have been explored as effective supports for Pt due to their Pt-like electronic properties. However, there is a lack of fundamental understanding regarding the behavior of Pt on different TMNs (Pt/TMN). Herein two TMNs, Mo 2 N and TiN, were modified with Pt and compared using methanol decomposition as a probe reaction via both ultrahigh vacuum (UHV) studies on thin films and ambient-pressure batch reactor studies of powder catalysts. Temperature-programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS) measurements were conducted under UHV conditions with Mo 2 N and TiN thin films. Mo 2 N was shown to favor C–H bond scission to form CO with a 56.2% selectivity, while TiN favored C–O bond scission to form CH 4 with a 74.5% selectivity. The addition of 0.9 monolayers (MLs) of Pt increased C–H bond scission selectivity to 89.7% and 49.2% for Mo 2 N and TiN respectively. Density functional theory (DFT) calculations on model surfaces revealed that the binding energy of O (BE *O ) was significantly reduced on Pt/TMNs, from −4.02 eV on Mo 2 N to −1.31 eV on Pt/Mo 2 N and −4.74 eV on TiN to −1.37 eV on Pt/TiN. As a result, C–O bond scission pathways were suppressed, leading to the preferential C–H bond scission that was observed experimentally. The C–O and C–H bond scission trends observed on thin films were then extended to powder catalysts, which demonstrated similar trends toward methanol decomposition. In conclusion, results from the current study establish that by combining UHV studies and DFT calculations over model surfaces, one can effectively predict the catalytic behavior of realistic TMN powder catalysts.

08 HYDROGEN↗
DOE OSTI2021

Two-bond 13 C– 13 C spin-coupling constants in saccharides: dependencies on exocyclic hydroxyl group conformation

Seven doubly 13 C-labeled isotopomers of methyl β-D-glucopyranoside, methyl β-D-xylopyranoside, methyl β-D-galactopyranoside, methyl β-D-galactopyranosyl-(1→4)-β-D-glucopyranoside and methyl β-D-galactopyranosyl-(1→4)-β-D-xylopyranoside were prepared, crystallized, and studied by single-crystal X-ray crystallography and solid-state 13 C NMR spectroscopy to determine experimentally the dependence of 2 J C1,C3 values in aldopyranosyl rings on the C1–C2–O2–H torsion angle, θ 2 , involving the C2 carbon of the C1–C2–C3 coupling pathway. Using X-ray crystal structures to determine θ 2 in crystalline samples and by selecting compounds that exhibit a relatively wide range of θ 2 values in the crystalline state, 2 J C1,C3 values measured in crystalline samples were plotted against θ 2 and the resulting plot compared to that obtained from density functional theory (DFT) calculations. For θ 2 values ranging from ~90° to ~240°, very good agreement was observed between the experimental and theoretical plots, providing strong validation of DFT-calculated spin-coupling dependencies on exocyclic C–O bond conformation involving the central carbon of geminal C–C–C coupling pathways. we report that these findings provide new experimental evidence supporting the use of 2 J CCC values as non-conventional spin-coupling constraints in MA'AT conformational modeling of saccharides in solution, and the use of NMR spin-couplings not involving coupled hydroxyl hydrogens as indirect probes of C–O bond conformation. Solvomorphism was observed in crystalline βGal-(1→4)-βGlcOCH 3 wherein the previously-reported methanol solvate form was found to spontaneously convert to a monohydrate upon air-drying, leading to small but discernible conformational changes in, and a new crystalline form of, this disaccharide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Constructing a square-like copper cluster to boost C–C coupling for CO 2 electroreduction to ethylene

The CO 2 electroreduction reaction (CO 2 ER) to ethylene (C 2 H 4 ) offers the dual promise of lowering CO 2 emission while storing energy from renewable electricity, for which the development of highly efficient electrocatalysts is of great significance. Herein, by means of density functional theory (DFT) computations, we designed an electrocatalyst for CO 2 -to-C 2 H 4 conversion by anchoring a Cu 5 cluster supported on a MoS 2 monolayer with an S monovacancy (Cu 5 @MoS 2 ). Our results revealed that one Cu atom of the Cu 5 cluster was embedded into the framework of the defective MoS 2 monolayer, while the other four Cu atoms form a square-like island over the substrate surface. Interestingly, the C–C coupling between two *CO species can easily occur on the unique square-like active site with a low kinetic barrier of 0.56 eV to form the key *C 2 O 2 intermediate, which can then be hydrogenated to the C 2 H 4 product with a very low limiting potential (–0.32 eV). Significantly, alkaline conditions (pH = 13) are beneficial to further promote C 2 H 4 synthesis. Finally, our work may offer a new avenue to precisely modulate the structures of Cu clusters for converting CO 2 into high-value target products.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Engineering Crassulacean Acid Metabolism in C 3 and C 4 Plants

Carbon dioxide (CO 2 ) is a major greenhouse gas contributing to changing climatic conditions, which is a grand challenge affecting the security of food, energy, and environment. Photosynthesis plays the central role in plant-based CO 2 reduction. Additionally, plants performing CAM (crassulacean acid metabolism) photosynthesis have a much higher water use efficiency than those performing C 3 or C 4 photosynthesis. Therefore, there is a great potential for engineering CAM in C 3 or C 4 crops to enhance food/biomass production and carbon sequestration on arid, semiarid, abandoned, or marginal lands. Recent progresses in CAM plant genomics and evolution research, along with new advances in plant biotechnology, have provided a solid foundation for bioengineering to convert C 3 /C 4 plants into CAM plants. Here, we first discuss the potential strategies for CAM engineering based on our current understanding of CAM evolution. Then we describe the technical approaches for engineering CAM in C 3 and C 4 plants, with a focus on an iterative four-step pipeline: (1) designing gene modules, (2) building the gene modules and transforming them into target plants, (3) testing the engineered plants through an integration of molecular biology, biochemistry, metabolism, and physiological approaches, and (4) learning to inform the next round of CAM engineering. Finally, we discuss the challenges and future opportunities for fully realizing the potential of CAM engineering.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Exploring the impact of vibrational cavity coupling strength on ultrafast CN + c -C 6 H 12 reaction dynamics

Abstract Molecular polaritons, hybrid light-matter states resulting from strong cavity coupling of optical transitions, may provide a new route to guide chemical reactions. However, demonstrations of cavity-modified reactivity in clean benchmark systems are still needed to clarify the mechanisms and scope of polariton chemistry. Here, we use transient absorption to observe the ultrafast dynamics of CN radicals interacting with a cyclohexane ( c -C 6 H 12 ) and chloroform (CHCl 3 ) solvent mixture under vibrational strong coupling of a C–H stretching mode of c- C 6 H 12 . By modulating the c -C 6 H 12 :CHCl 3 ratio, we explore how solvent complexation and hydrogen (H)-abstraction processes proceed under collective cavity coupling strengths ranging from 55 to 85 cm −1 . Reaction rates remain unchanged for all extracavity, on-resonance, and off-resonance cavity coupling conditions, regardless of coupling strength. These results suggest that insufficient vibrational cavity coupling strength may not be the determining factor for the negligible cavity effects observed previously in H-abstraction reactions of CN with CHCl 3 .

Chen, Liying↗