Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “H2O2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Membrane Thickness Impact on Chemical Degradation Rates

Abstract A comprehensive investigation of PFSA membrane chemical degradation rates as a function of thickness (8-20 µm) is reported. The two-pronged study was conducted on bare membranes and as components of chemically-mitigated and mechanically-reinforced, state-of-the-art (SOA) membrane electrode assemblies (MEAs). The bare membranes were subjected to H2O2 vapor test and MEAs were degraded under OCV conditions, both at 90°C. Both test types employed fluoride release rates (FRR) to monitor chemical degradation rates. Vapor tests revealed that area-specific degradation rates were positively correlated with membrane thickness, but thickness normalized degradation rates were independent of thickness. Open-circuit voltage (OCV) investigations spanning the membrane thickness series of MEAs was probed via a 27-experiment 3(4-1) fractional factorial experimental design. Statistical analysis of the FRR values revealed that chemical degradation rates were dominated by the relative humidity value and that the area-specific degradation rates of MEAs were independent of membrane thickness. The OCV chemical durability insensitivity to membrane thickness is supported by on-load membrane chemical durability studies at the stack level. The results suggest that ,despite smaller ionomer inventory, SOA thin membranes and MEAs are not greatly disadvantaged relative to thicker membranes from a chemical durability perspective, provided oxidative stress levels are controlled throughout application lifetime.

Coms, Frank D. (ORCID:0000000249160350)↗
DOE OSTI2020

Materials Data on H11O8 by Materials Project

(H2O)2(H2O2)3(H3O2)4 crystallizes in the triclinic P1 space group. The structure is zero-dimensional and consists of one hydrogen peroxide hydrate molecule, one water molecule, and two water water molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on MnV2P2(H4O7)2 by Materials Project

V2MnP2(H2O5)2(H2O2)2 crystallizes in the triclinic P-1 space group. The structure is one-dimensional and consists of four water molecules and one V2MnP2(H2O5)2 ribbon oriented in the (1, 1, 0) direction. In the V2MnP2(H2O5)2 ribbon, V4+ is bonded in a tetrahedral geometry to four O2- atoms. There are a spread of V–O bond distances ranging from 1.69–1.92 Å. Mn2+ is bonded in a distorted rectangular see-saw-like geometry to four O2- atoms. There are two shorter (2.14 Å) and two longer (2.40 Å) Mn–O bond lengths. P5+ is bonded in a trigonal non-coplanar geometry to three O2- atoms. There are a spread of P–O bond distances ranging from 1.60–1.63 Å. There are two inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the second H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.00 Å. There are five inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 150 degrees geometry to one V4+ and one P5+ atom. In the second O2- site, O2- is bonded in a water-like geometry to one P5+ and one H1+ atom. In the third O2- site, O2- is bonded in a 2-coordinate geometry to one V4+, one Mn2+, and one H1+ atom. In the fourth O2- site, O2- is bonded in a water-like geometry to one V4+ and one Mn2+ atom. In the fifth O2- site, O2- is bonded in a bent 120 degrees geometry to one V4+ and one P5+ atom.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on H30S2O21 by Materials Project

(H2O)5(H2O2)2(H7O4)2(HSO2)2 crystallizes in the monoclinic Cm space group. The structure is one-dimensional and consists of four sulfanediol molecules; ten water molecules; eight water molecules; and two H7O4 ribbons oriented in the (0, 0, 1) direction. In each H7O4 ribbon, there are seven inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the second H1+ site, H1+ is bonded in a linear geometry to two O2- atoms. There is one shorter (1.03 Å) and one longer (1.55 Å) H–O bond length. In the third H1+ site, H1+ is bonded in a distorted single-bond geometry to two O2- atoms. There is one shorter (1.01 Å) and one longer (1.64 Å) H–O bond length. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the fifth H1+ site, H1+ is bonded in a linear geometry to two O2- atoms. There is one shorter (1.13 Å) and one longer (1.32 Å) H–O bond length. In the sixth H1+ site, H1+ is bonded in a linear geometry to two O2- atoms. There is one shorter (1.03 Å) and one longer (1.58 Å) H–O bond length. In the seventh H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. There are five inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to three H1+ atoms. In the second O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to two equivalent H1+ and one O2- atom. The O–O bond length is 1.49 Å. In the third O2- site, O2- is bonded in a 2-coordinate geometry to three H1+ atoms. In the fourth O2- site, O2- is bonded in a distorted water-like geometry to two equivalent H1+ and one O2- atom. In the fifth O2- site, O2- is bonded in a trigonal non-coplanar geometry to three H1+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on CaMg2H24(ClO2)6 by Materials Project

(Mg(HCl)2)2Ca(ClO)2(H2)8(H2O2)2(O2)3 crystallizes in the triclinic P-1 space group. The structure is zero-dimensional and consists of one calciumhypochlorite molecule, eight hydrogen molecules, two trioxidane molecules, four water molecules, and one Mg(HCl)2 cluster. In the Mg(HCl)2 cluster, Mg2+ is bonded in a 5-coordinate geometry to two H1+ and three Cl1- atoms. There are one shorter (2.01 Å) and one longer (2.28 Å) Mg–H bond lengths. There are a spread of Mg–Cl bond distances ranging from 2.27–2.41 Å. There are two inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one Mg2+ atom. In the second H1+ site, H1+ is bonded in a single-bond geometry to one Mg2+ atom. There are two inequivalent Cl1- sites. In the first Cl1- site, Cl1- is bonded in a single-bond geometry to one Mg2+ atom. In the second Cl1- site, Cl1- is bonded in an L-shaped geometry to two equivalent Mg2+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on FePH5CO8 by Materials Project

(FeCPH2O6)2H2(H2O2)2 crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional and consists of four dihydrogen molecules, eight water molecules, and one FeCPH2O6 framework. In the FeCPH2O6 framework, Fe2+ is bonded to five O2- atoms to form distorted FeO5 square pyramids that share corners with two equivalent PO4 tetrahedra and an edgeedge with one PO4 tetrahedra. There are a spread of Fe–O bond distances ranging from 2.02–2.44 Å. C4+ is bonded in a bent 120 degrees geometry to two O2- atoms. There is one shorter (1.24 Å) and one longer (1.30 Å) C–O bond length. P5+ is bonded to four O2- atoms to form PO4 tetrahedra that share corners with two equivalent FeO5 square pyramids and an edgeedge with one FeO5 square pyramid. There are a spread of P–O bond distances ranging from 1.51–1.63 Å. There are two inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the second H1+ site, H1+ is bonded in a linear geometry to two O2- atoms. There is one shorter (1.03 Å) and one longer (1.57 Å) H–O bond length. There are six inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 150 degrees geometry to one Fe2+ and one C4+ atom. In the second O2- site, O2- is bonded in a distorted trigonal planar geometry to one Fe2+, one P5+, and one H1+ atom. In the third O2- site, O2- is bonded in a bent 150 degrees geometry to one Fe2+ and one P5+ atom. In the fourth O2- site, O2- is bonded in a distorted water-like geometry to one Fe2+ and one P5+ atom. In the fifth O2- site, O2- is bonded in a bent 120 degrees geometry to one C4+ and one H1+ atom. In the sixth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Fe2+, one P5+, and one H1+ atom.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on SbH5(O2F3)2 by Materials Project

H2(H3O2)2(H2O2)6(SbF4)4(F2)4 crystallizes in the triclinic P1 space group. The structure is zero-dimensional and consists of four hydrofluoric acid molecules, one hydrogen molecule, two hydrogen peroxide molecules, two water molecules, one H3O2 cluster, and two SbF4 clusters. In the H3O2 cluster, there are three inequivalent H sites. In the first H site, H is bonded in a single-bond geometry to one O atom. The H–O bond length is 1.61 Å. In the second H site, H is bonded in a single-bond geometry to one O atom. The H–O bond length is 1.63 Å. In the third H site, H is bonded in a linear geometry to two O atoms. There is one shorter (1.26 Å) and one longer (1.30 Å) H–O bond length. There are two inequivalent O sites. In the first O site, O is bonded in a 2-coordinate geometry to two H atoms. In the second O site, O is bonded in a 1-coordinate geometry to two H atoms. In each SbF4 cluster, Sb is bonded in a 2-coordinate geometry to four F atoms. There are a spread of Sb–F bond distances ranging from 1.77–2.30 Å. There are four inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one Sb atom. In the second F site, F is bonded in a single-bond geometry to one Sb atom. In the third F site, F is bonded in a single-bond geometry to one Sb atom. In the fourth F site, F is bonded in a single-bond geometry to one Sb atom.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Cr2NiH20(NO7)2 by Materials Project

NiH2(CrNHO4)2(H2)4(H2O2)2(H2O)2 crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of eight hydrogen molecules, two nickel dihydride molecules, four water molecules, eight water molecules, and four CrNHO4 clusters. In each CrNHO4 cluster, Cr6+ is bonded in a 3-coordinate geometry to one N3- and four O2- atoms. The Cr–N bond length is 1.86 Å. There are a spread of Cr–O bond distances ranging from 1.60–2.02 Å. N3- is bonded in a distorted L-shaped geometry to one Cr6+ and one O2- atom. The N–O bond length is 1.24 Å. H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.97 Å. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted single-bond geometry to one Cr6+ atom. In the second O2- site, O2- is bonded in a single-bond geometry to one Cr6+ atom. In the third O2- site, O2- is bonded in a 1-coordinate geometry to one Cr6+ and one N3- atom. In the fourth O2- site, O2- is bonded in a bent 120 degrees geometry to one Cr6+ and one H1+ atom.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Optimized Microwave Digestion and Quantification Procedure for Boron Carbide samples

A microwave-assisted HNO3-H2SO4-HF digestion system was explored/optimized for the total dissolution of Boron Carbide samples followed by multi-elemental determination using ICP-MS and ICP OES, in order to improve the methods used in a previous try using a microwave-assisted H2O2-HNO3-HF digestion system. The samples were microwave digested to accomplish complete dissolution needed to perform quantitative analysis of their metal content. Two Boron Carbide samples were provided to us: JM10 and JM11. The Boron Carbide samples were completely dissolved at the end of the optimized microwave digestion procedure that was developed. The digested samples were analyzed for metals mostly by ICP MS; few elements were analyzed by ICP-OES. Microwave digestion reactions were performed in a Titan MPS instrument (Perkin Elmer, USA). Titan MPS instrument is equipped with Temperature and Pressure regulations and controlled by software. Each microwave digestion batch contained the samples of interest along with a reagent blank and one certified standard (1632e) in order to (i) compensate for the contaminations present in the reagents, (ii) ensure that the digestion was complete and (iii) that there was a good recovery of all the constituents. The certified standard used (1632e) was provided with USGS certificates of analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Virtual Growth of SRF Materials

Niobium's native surface oxide affects SRF cavity and superconducting qubit performance, motivating interest in controlling its crystalline structure. We combine a literature-derived machine-learning analysis with temperature-dependent XRD to study crystalline ordering in Nb2O5. Random Forest models, trained on 74 processing conditions from 17 papers and validated by leave-one-group-out cross-validation, predicted broad crystallinity outcomes well (balanced accuracy 0.809), but struggled with specific polymorph identity (0.577). Annealing temperature was the dominant predictor across all targets; oxygen partial pressure showed negligible importance, reflecting narrow literature coverage rather than physical irrelevance. Temperature-dependent XRD on anodized and H2O2-treated Niobium showed structural evolution consistent with the machine learning predictions. Our model and overall approach provide a data-driven framework for identifying and optimizing conditions that promote crystallization in initially amorphous oxides. This framework can guide the selection of growth and post-annealing conditions for Nb surfaces by narrowing the experimental parameter space, thereby reducing trial-and-error efforts in developing oxide structures relevant to SRF applications.

Tilkin, Anthony [Fermilab]↗
DOE OSTI2020

Manganese Catalysts with Tetradentate N-donor Pyridine-Appended Bipiperidine Ligands for Olefin Epoxidation Reactions: Ligand Electronic Effect and Mechanism

In this work, we described an electron-rich manganese mesoPYBP catalyst, Mn-SR-mesoPYBP(ClO4)2, by introducing electron-donating substituents on the mesoPYBP ligand. We optimized the catalytic performance in olefin epoxidation with H2O2 in the presence of acetic acid. The electron paramagnetic resonance (EPR) and cyclic voltammetry (CV) studies supported that an electronic effect could stabilize the high-valent intermediates in the catalytic cycles of the catalyst, which largely improved the catalytic performance and the reactivity of olefin epoxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An In-Depth Exploration of the Electrochemical Oxygen Reduction Reaction (ORR) Phenomenon on Carbon-Based Catalysts in Alkaline and Acidic Mediums

Detailed studies of the electrochemical oxygen reduction reaction (ORR) on catalyst materials are crucial to improving the performance of different electrochemical energy conversion and storage systems (e.g., fuel cells and batteries), as well as numerous chemical synthesis processes. In the effort to reduce the loading of expensive platinum group metal (PGM)-based catalysts for ORR in the electrochemical systems, many carbon-based catalysts have already shown promising results and numerous investigations on those catalysts are in progress. Most of these studies show the catalyst materials’ ORR performance as current density data obtained through the rotating disk electrode (RDE), rotating ring-disk electrode (RRDE) experiments taking cyclic voltammograms (CV) or linear sweep voltammograms (LSV) approaches. However, the provided descriptions or interpretations of those data curves are often ambiguous and recondite which can lead to an erroneous understanding of the ORR phenomenon in those specific systems and inaccurate characterization of the catalyst materials. In this paper, we presented a study of ORR on a newly developed carbon-based catalyst, the nitrogen-doped graphene/metal-organic framework (N-G/MOF), through RDE and RRDE experiments in both alkaline and acidic mediums, taking the LSV approach. The functions and crucial considerations for the different parts of the RDE/RRDE experiment such as the working electrode, reference electrode, counter electrode, electrolyte, and overall RDE/RRDE process are delineated which can serve as guidelines for the new researchers in this field. Experimentally obtained LSV curves’ shapes and their correlations with the possible ORR reaction pathways within the applied potential range are discussed in depth. We also demonstrated how the presence of hydrogen peroxide (H2O2), a possible intermediate of ORR, in the alkaline electrolyte and the concentration of acid in the acidic electrolyte can maneuver the ORR current density output in compliance with the possible ORR pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Evaluating the Impact of Redox Potential on the Corrosion of Q125, 316L, and C276 Steel in Low-Temperature Geothermal Systems

Time series experiments were used to explore the fluid redox impact on the corrosion of Q125, 316L, and C276 steels in low-ionic-strength and neutral water at temperature and pressure conditions associated with low-temperature geothermal systems. After exposing polished samples of each steel grade to an oxidizing (H2O2) and a reducing (Zn-doped) fluid for intervals of 24 h, 1 week, and 6 weeks, the atomic force microscopy results revealed general corrosion for Q125, while 316L and C276 exhibited pitting, crevice expansion, and edge attack corrosion. Secondary depositional features are frequently found as topographic highs, adjacent to pitting corrosion. These features may be identified as there is a very strong spatial correlation between the height retrace and phase retrace surface maps. All steels became progressively rougher over time after exposure to both fluids, while the corrosion rates were more complex. Samples exposed to the reducing fluid experienced an increase in the corrosion rate over time, while C276 and 316L experienced a decrease in the corrosion rate. Finally, a novel data validation technique was developed to address the intrinsic scalability of corrosion. The results indicate that the AFM scan area does not affect the measured surface roughness over nearly three orders of magnitude.

Bowman, Samuel (ORCID:000000021510174X)↗
DOE OSTI2021

A Multiomic Approach to Understand How Pleurotus eryngii Transforms Non-Woody Lignocellulosic Material

Pleurotus eryngii is a grassland-inhabiting fungus of biotechnological interest due to its ability to colonize non-woody lignocellulosic material. Genomic, transcriptomic, exoproteomic, and metabolomic analyses were combined to explain the enzymatic aspects underlaying wheat–straw transformation. Up-regulated and constitutive glycoside–hydrolases, polysaccharide–lyases, and carbohydrate–esterases active on polysaccharides, laccases active on lignin, and a surprisingly high amount of constitutive/inducible aryl–alcohol oxidases (AAOs) constituted the suite of extracellular enzymes at early fungal growth. Higher enzyme diversity and abundance characterized the longer-term growth, with an array of oxidoreductases involved in depolymerization of both cellulose and lignin, which were often up-regulated since initial growth. These oxidative enzymes included lytic polysaccharide monooxygenases (LPMOs) acting on crystalline polysaccharides, cellobiose dehydrogenase involved in LPMO activation, and ligninolytic peroxidases (mainly manganese-oxidizing peroxidases), together with highly abundant H2O2-producing AAOs. Interestingly, some of the most relevant enzymes acting on polysaccharides were appended to a cellulose-binding module. This is potentially related to the non-woody habitat of P. eryngii (in contrast to the wood habitat of many basidiomycetes). Additionally, insights into the intracellular catabolism of aromatic compounds, which is a neglected area of study in lignin degradation by basidiomycetes, were also provided. The multiomic approach reveals that although non-woody decay does not result in dramatic modifications, as revealed by detailed 2D-NMR and other analyses, it implies activation of the complete set of hydrolytic and oxidative enzymes characterizing lignocellulose-decaying basidiomycetes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Using MALDI-FTICR-MS Imaging to Track Low-Molecular-Weight Aromatic Derivatives of Fungal Decayed Wood

Low-molecular-weight (LMW) aromatics are crucial in meditating fungal processes for plant biomass decomposition. Some LMW compounds are employed as electron donors for oxidative degradation in brown rot (BR), an efficient wood-degrading strategy in fungi that selectively degrades carbohydrates but leaves modified lignins. Previous understandings of LMW aromatics were primarily based on “bulk extraction”, an approach that cannot fully reflect their real-time functions during BR. Here, we applied an optimized molecular imaging method that combines matrix-assisted laser desorption ionization (MALDI) with Fourier-transform ion cyclotron resonance mass spectrometry (FTICR-MS) to directly measure the temporal profiles of BR aromatics as Rhodonia placenta decayed a wood wafer. We found that some phenolics were pre-existing in wood, while some (e.g., catechin-methyl ether and dihydroxy-dimethoxyflavan) were generated immediately after fungal activity. These pinpointed aromatics might be recruited to drive early BR oxidative mechanisms by generating Fenton reagents, Fe2+ and H2O2. As BR progressed, ligninolytic products were accumulated and then modified into various aromatic derivatives, confirming that R. placenta depolymerizes lignin. Together, this work confirms aromatic patterns that have been implicated in BR fungi, and it demonstrates the use of MALDI-FTICR-MS imaging as a new approach to monitor the temporal changes of LMW aromatics during wood degradation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Long-Term Performance of Ag/AgCl Reference Electrodes for Corrosion Potential Monitoring in Radioactive Tank Waste at the Hanford Site

This work studied the exposure effects of radioactive tank waste on the long-term performance of single junction Ag/AgCl reference electrodes for corrosion potential monitoring at the Hanford Site. Electrodes from three manufacturers with very different designs were studied using open-circuit potential and electrochemical impedance measurements in radioactive tank waste. Post-test analyses were conducted on some failed electrodes using destructive and nondestructive techniques. The intrusion of the aggressive and radioactive chemicals in tank waste through the porous frit materials was the primary mechanism that led to the clogging of frit, physical and chemical degradation of AgCl bonded to Ag wire, and alteration of the internal electrolyte. Radiolytic chemical species such as H2O2 and HNO3 may have also induced the degradation of the Ag wire. The extent of electrode degradation and failure probability highly depended on the electrode design and environmental conditions. Chemicals in tank waste had stronger effects than radiation on the long-term performance of the Ag/AgCl reference electrodes.

Materials Science↗
DOE OSTI2021

CACTI ARM Mobile Facility (AMF) Measurements of Ice Nucleating Particles

The dataset comprises measures, using Colorado State University's Ice Spectrometer (IS, an immersion freezing device with a range from 0°C down to -26 to -29°C) of atmosperic ice nucleating particle (INP) concentrations taken on ARM's Mobile Facility (AMF-1) Aerosol Observing System, near Villa Yacanto in central Argentina, during the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) Experiment. A filter sampler was mounted on the AOS trailer (2 m below the AOS inlet). Single-use filter units open to the atmosphere fitted with pre-cleaned and pre-sterilized, 47-mm dia. Nuclepore polycarbonate filters were used. Filters were typically drawn for an 8-hour period, totaling 6000 liters sampled on average. After collection, filters were stored at -20°C until processed. Initial processing to obtain spectra of INP number concentration active via the immersion freezing mechanism versus temperature was conducted using CSU's IS instrument (McCluskey et al., 2018). For measurment of INPs, collected aerosol particles were re-suspended in 7-8 mL of 0.1 µm-filtered deionized (DI) water. Aliquots of each suspension, and serial dilutions, were dispensed into trays which were fit into aluminum blocks in the IS. Samples are cooled at 0.33°C min-1 and the freezing temperatures of wells recorded automatically. Cumulative INP concentrations were determined by first calculating the INPs per mL of suspension based on Vali (1971) and then converting to concentration per standard liter of air using the proportion of the total liquid sample dispensed and the air sample volumes. An aliquot of suspension fro selected samples were also heat treated (95°C for 20 min) to denature and deactivate biological INPs, and another aliquot digested in 10% H2O2 at 95°C under UV-B to remove all organic carbon INPs. McCluskey, C. S., J. Ovadnevaite, M. Rinaldi, J. Atkinson, F. Belosi, D. Ceburnis, S. Marullo, T. C. J. Hill, U. Lohmann, Z. A. Kanji, C. O’Dowd, S. M. Kreidenweis, P. J. DeMott, 2018: Marine and Terrestrial Organic Ice Nucleating Particles in Pristine Marine to Continentally-Influenced Northeast Atlantic Air Masses, Journal of Geophysical Research: Atmospheres, 123, 6196–6212, https://doi.org/10.1029/2017JD028033. Vali, G., 1971: Quantitative evaluation of experimental results on the heterogeneous freezing nucleation of supercooled liquids. J. Atmos. Sci., 28, 402–409.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

CACTI ARM Aerial Facility Measurements of Ice Nucleating Particles

The dataset comprises measures, using Colorado State University's Ice Spectrometer (IS, an immersion freezing device with a range from 0°C down to -26 to -29°C) of atmospheric ice nucleating particle (INP) concentrations taken on the Atmospheric Radiation Measurement (ARM) program Aerial Facilty (AAF) G-1 aircraft. INP measurements on the G-1 were collected from varied altitudes on different flights over the region of the Sierras de Córdoba mountain range of north-central Argentina, centred over ARM's Mobile Facility (AMF-1) near Villa Yacanto, where ground-based INP measures were being taken concurrently. Both studies took place as part of the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) Experiment. A filter sampling system was deployed on the G-1 to collect aerosol particles for post-processing of INPs collected on filters (measuring their immersion freezing ability) once returned to Colorado State University (CSU). Filter holders used were pre-cleaned aluminum in-line units loaded with pre-cleaned and pre-sterilized 47 mm dia. Nuclepore polycarbonate filters (0.2 mm pore size). Filters were drawn for varied times, resulting in varied volumes collected (51 to 1667 SL). Mass flow rate was recorded in real-time so that total sampled volume (at standard temperature and pressure) could be determined. A total of 34 sample filters were collected over the IOP, including 5 blanks. Filters were stored at -20°C freezer prior to frozen return to Colorado State University (CSU). . Processing to obtain spectra of INP number concentration active via the immersion freezing mechanism versus temperature was conducted using CSU's IS instrument (McCluskey et al., 2018). For measurment of INPs, collected aerosol particles were re-suspended in 7 mL of 0.02 µm-filtered deionized water. Aliquots of each suspension, and serial dilutions, were dispensed into trays which were fit into aluminum blocks in the IS. Samples are cooled at 0.33°C min-1 and the freezing temperatures of wells recorded automatically. Cumulative INP concentrations were determined by first calculating the INPs per mL of suspension based on Vali (1971) and then converting to concentration per standard liter of air using the proportion of the total liquid sample dispensed and the air sample volumes. Aliquots of suspensions from selected samples were also heat treated (95°C for 20 min) to denature and deactivate biological INPs, and digested in 10% H2O2 at 95°C under UV-B to remove all organic carbon INPs. McCluskey, C. S., J. Ovadnevaite, M. Rinaldi, J. Atkinson, F. Belosi, D. Ceburnis, S. Marullo, T. C. J. Hill, U. Lohmann, Z. A. Kanji, C. O’Dowd, S. M. Kreidenweis, P. J. DeMott, 2018: Marine and Terrestrial Organic Ice Nucleating Particles in Pristine Marine to Continentally-Influenced Northeast Atlantic Air Masses, Journal of Geophysical Research: Atmospheres, 123, 6196–6212, https://doi.org/10.1029/2017JD028033. Vali, G., 1971: Quantitative evaluation of experimental results on the heterogeneous freezing nucleation of supercooled liquids. J. Atmos. Sci., 28, 402–409.

54 ENVIRONMENTAL SCIENCES↗