First-Principles Modeling of Transport Mechanisms in Carbonate–Hydroxide Electrolytes
Not provided.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not provided.
Platinum nanoparticles size range from 1 to 8 nm deposited on mesoporous silica MCF-17 catalyzed alcohol oxidations were studied in the gas and liquid phases. Among methanol, ethanol, 2- propanol and 2-butanol reactions, the turnover frequency increased with Pt nanoparticle size for all the alcohols utilized. The activation energies for the oxidations were almost same among all alcohol species, but higher in the gas phase than those in the liquid phase. Water coadsorption poisoned the reaction in the gas phase, while it increased the reaction turnover rates in the liquid phase. Sum frequency generation (SFG) vibrational spectroscopy studies and DFT calculations revealed that the alcohol molecules pack horizontally on the metal surface in low concentrations and stand up in high concentrations, which affect the dissociation of β-hydrogen of the alcohols as the critical step in alcohol oxidations.
While silicon is the most promising next-generation anode material for lithium-ion batteries (LIBs), silicon electrodes exhibit significant capacity fade with cycling. A common hypothesis is that the capacity loss is due to the solid electrolyte interphase (SEI) forming in the first cycle and becoming destabilized by large cyclic volume changes. A cell for in situ attenuated total reflection-Fourier transform infrared spectroscopy with controllable penetration depth was used to study the chemistry at the electrode–electrolyte interface. The SEI product precursors at the interface were successfully identified and differentiated from free or solvated solvent molecules in the bulk electrolyte. Intriguingly, for the most common electrolyte consisting of ethylene carbonate and diethyl carbonate, ethylene carbonate was found to directly reduce to lithium ethylene dicarbonate on the lithiated silicon surface and diethyl carbonate to selectively reduce to diethyl 2,5-dioxahexane dicarboxylate on the surface of the native silicon-oxide film. In conclusion, understanding this surface dependence of the SEI composition is critical to tuning the silicon electrode surface condition and, ultimately, enhancing the performance of future LIBs.
The supramolecular self-assembly of copper(II) octaethylporphyrin (CuOEP) and octaethylporphyrin (H 2 OEP) on graphitic surfaces immersed in organic solvents (dichlorobenzene, dodecane) is studied using scanning tunneling microscopy (STM) and Raman spectroscopy. STM reveals that the self-assembled structure of CuOEP in 1,2-dichlorobenzene is significantly altered by dissolved oxygen within the solvent. Raman spectroscopy reveals that the presence of the oxygen alters the molecule-substrate interaction, which is attributed to the adsorption of oxygen on the Cu center of the CuOEP, which is facilitated by electron transfer from the graphitic surface. Such oxygen-induced changes are not observed for H 2 OEP, indicating that the metal center of CuOEP plays a critical role. Finally, when the solvent is dodecane, we find that solvation effects dominate. CuOEP adsorbed on graphitic surfaces provides a model system relevant to the study of the transport and activation of oxygen by enzymes and other complexes.
Linear viscoelastic properties in both melt and solution states are reported for a series of poly(3,6-dioxa-1,8-octanedithiol) (polyDODT) made by reversible radical recombination polymerization (R 3 P) under conditions designed to produce linear (LDODT), cyclic (RDODT) and linear-cyclic mixtures (LRDODT). PolyDODT is amorphous (T g < -50 °C) and highly flexible (entanglement molecular weight M e,lin ≈ 1850 g/mol for LDODT). PolyDODT’s low T g and low M e,lin enable characterization over a wide dynamic range and a wide range of dimensionless weight-average molecular weight Z w = M w /M e,lin . Measurements at temperatures from -57 °C to 100 °C provide up to 18 deades of reduced frequency, which is necessary to characterize RDODT melts with Z w from 23 to 300. The two highest molecular weight polymers in the present RDODT series have such high M w (406k and 556k g/mol) that mass spectrometry, NMR spectroscopy, and even chemical assays for chain ends are unable to rule out up to 2 mol% linear contaminant. By studying the samples in solution (using dilution to reduce Z w ) we could compare their dynamics with those of previously established high-purity polystyrene (PS) rings (limited to Z w ≤ 13.6). RDODT solutions with Z w < 15 (concentrations <5wt% for RDODT-406k and 556k) have dynamic moduli G^* that accord with LCCC-purified PS rings in terms of the frequency dependence (including the absence of a plateau), the progression of shapes of G* as a function of Z w , and the linear scaling of their zero-shear viscosity η0 with M w . The shape of G* as a function of Z w for solutions of RDODT-406k and -556k also accord with lower M w RDODT melts (which have ≤ 1.3mol% linear contaminant). Thus, measurement of the linear viscoelastic properties of appropriate concentrations of high M w (>200k g/mol) putative cyclic polymers, in which linear chains evade spectroscopic detection, may provide an alternative means (though not fully proven) of validation of sample purity. When Z w > 15 (including all seven RDODT melts and eight of their solutions), G* has a rubbery plateau. This suggests that the onset of entanglement-like behavior in rings requires 4-5-fold greater Z w than is required for linear chains. Further, the plateau moduli of RDODT samples are indistinguishable from G N o of the corresponding LDODT (melt or matched-concentration solutions). In entangled linear polymers, the observation that G N o is independent of Z w follows from limitations on lateral fluctuations due to neighboring chains becoming independent of position along a given chain. The present results for RDODT suggest that this holds for sufficiently long endless chains, too. While the RDODT have the same G N o as entangled LDODT, when Z w > 60 the terminal relaxation, if reached at all, of RDODT extends to orders of magnitude lower frequency than an entangled linear polymer of the same Z w . Consequently, the viscosity of RDODT with Z w > 60 increases with Z w much more strongly than the 3.4-power observed for entangled linear polymers. Lastly, these novel polymers, with disulfide-linked backbone and broad relaxation time distribution may prove important in relation to biodegradable elastomers and materials with exceptional low-frequency dissipation, extending at least 12 decades below the onset of the rubbery plateau.
Manipulating the flow of energy in nanoscale and molecular photonic devices is of both fundamental interest and central importance for applications in light energy harvesting optoelectronics. Under erratic solar irradiance conditions, unregulated power fluctuations in a light-harvesting photocell lead to inefficient energy storage in conventional solar cells and potentially fatal oxidative damage in photosynthesis. In this work, we compare the theoretical minimum energy fluctuations in nanoscale quantum heat engine photocells that incorporate one or two photon-absorbing channels and show that fluctuations are naturally suppressed in the two-channel photocell. This intrinsic suppression acts as a passive regulation mechanism that enables the efficient conversion of varying incident solar power into a steady output for absorption over a broad range of the solar spectrum on Earth. Remarkably, absorption in the green portion of the spectrum provides no inherent regulatory benefit, indicating that green light should be rejected in a photocell whose primary role is the regulation of energy flow.
Not Available
Conversion of carbon dioxide to C 2 -C 4 hydrocarbons is a major pursuit in clean energy research. Despite tremendous efforts, the lack of well-defined catalysts in which the spatial arrangement of interfaces is precisely controlled hinders the development of more efficient catalysts and in-depth understanding of reaction mechanisms. Herein, we utilized the strategy of tandem catalysis to develop a well-defined nanostructured catalyst CeO 2 -Pt@mSiO2-Co for converting CO 2 to C 2 -C 4 hydrocarbons using two metal-oxide interfaces. C 2 -C 4 hydrocarbons are found to be produced with high (60%) selectivity, which is speculated to be the result of the two-step tandem process uniquely allowed by this catalyst. Namely, the Pt/CeO 2 interface converts CO 2 and H 2 to CO, and on the neighboring Co/mSiO 2 interface yields C 2 -C 4 hydrocarbons through a subsequent Fischer-Tropsch process. In addition, the catalysts show no obvious deactivation over 40 h. The successful production of C 2 -C 4 hydrocarbons via a tandem process on a rationally designed, structurally well-defined catalyst demonstrates the power of sophisticated structure control in designing nanostructured catalysts for multiple-step chemical conversions.
Here, the cyclability of silicon anodes in lithium ion batteries (LIBs) is affected by the reduction of the electrolyte on the anode surface to produce a coating layer termed the solid electrolyte interphase (SEI). One of the key steps for a major improvement of LIBs is unraveling the SEI’s structure-related diffusion properties as charge and discharge rates of LIBs are diffusion-limited. To this end, we have combined two surface sensitive techniques, sum frequency generation (SFG) vibrational spectroscopy, and X-ray reflectivity (XRR), to explore the first monolayer and to probe the first several layers of electrolyte, respectively, for solutions consisting of 1 M lithium perchlorate (LiClO 4 ) salt dissolved in ethylene carbonate (EC) or fluoroethylene carbonate (FEC) and their mixtures (EC/FEC 7:3 and 1:1 wt %) on silicon and sapphire surfaces. Our results suggest that the addition of FEC to EC solution causes the first monolayer to rearrange itself more perpendicular to the anode surface, while subsequent layers are less affected and tend to maintain their, on average, surface-parallel arrangements. This fundamental understanding of the near-surface orientation of the electrolyte molecules can aid operational strategies for designing high-performance LIBs.
The hydrogenation of crotonaldehyde by platinum nanoparticles supported on cobalt oxide was used as a reaction to probe the effect of the interface between the two materials on the activity and selectivity of the catalyst. Four potential products can be formed by this reaction: propylene, butyraldehyde, crotyl alcohol, and butanol. When Pt nanoparticles are supported on SiO 2 , an inert support, only propylene and butyraldehyde are formed. However, when Pt is supported on cobalt oxide, the alcohols make up roughly 40% of the total activity, indicating that cobalt oxide plays a pivotal role in the reaction, much like other active supports such as TiO 2 . To elucidate the mechanism of alcohol formation, in situ sum frequency generation vibrational spectroscopy (SFG) and ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) were utilized to probe the reactant adsorption and intermediate formation and the chemical state of the materials under working catalytic conditions. The SFG data indicate that crotonaldehyde adsorbs on the oxide surface, likely through the aldehyde oxygen as well as on the Pt surface through the alkene group. AP-XPS results show that the surface of the Co 3 O 4 support becomes partially reduced under the reaction conditions and Pt exists in its metallic state. Taking these results together, we propose in this paper that the crotonaldehyde adsorbs at reduced oxide surface sites and that this adsorption mode is responsible for the production of alcohol products. A platinum nanoparticle density dependence study was also undertaken to change the abundance of interface sites and study their effect on the reaction. The selectivity between the two alcohol products was altered as a function of the Pt nanoparticle density: higher selectivity toward butanol and lower selectivity toward crotyl alcohol was obtained with increasing density, while propylene and butyraldehyde selectivities were constant with respect to density. Finally, on the basis of the data presented, we propose that butanol is preferentially formed at the metal–oxide interface, while crotyl alcohol is formed at oxide surface sites by reaction with spillover hydrogen.
Interfacial band alignment in two-dimensional (2D)/three-dimensional (3D) perovskite heterostructures is important for maximizing separation, extraction, and collection of charge carriers, which, in turn, stabilize the perovskite layer during solar cell operation. Despite the wide use of 2D spacer cations for stabilizing perovskite solar cells, spacer cation exchange across the 2D/3D interface induces structural transformation and degradation in performance and stability. We have now examined the electrochemical and photoelectrochemical behavior of 2D Ruddlesden–Popper (RP) and Dion–Jacobson (DJ) perovskites to assess the impact of binding configuration on the interfacial charge separation and their operational stability. In-situ open circuit potential (OCP) responses of 2D perovskites under light illumination, paired with redox couples (ferrocene/ferrocenium), reveal different semiconducting polarizabilities of BA-RP (n-type) and BDA-DJ (p-type). The tunability of the Fermi energy level in 2D perovskites discussed in this study offers insight into the design of 2D/3D interfaces for optimizing charge transfer and enhancing charge neutrality and stability.
A phase transition within the ligand shell of core/shell quantum dots is studied in the prototypical system of colloidal CdSe/CdS quantum dots with a ligand shell composed of bound oleate (OA) and octadecylphosphonate (ODPA). The ligand shell composition is tuned using a ligand exchange procedure and quantified through proton NMR spectroscopy. Temperature-dependent photoluminescence spectroscopy reveals a signature of a phase transition within the organic ligand shell. Surprisingly, the ligand order to disorder phase transition triggers an abrupt increase in the photoluminescence quantum yield (PLQY) and full-width at half-maximum (FWHM) with increasing temperature. The temperature and width of the phase transition show a clear dependence on ligand shell composition, such that QDs with higher ODPA fractions have sharper phase transitions that occur at higher temperatures. In order to gain a molecular understanding of the changes in ligand ordering, Fourier transform infrared and vibrational sum frequency generation spectroscopies are performed. These measurements confirm that an order/disorder transition in the ligand shell tracks with the photoluminescence changes that accompany the ligand phase transition. The phase transition is simulated through a lattice model that suggests that the ligand shell is well-mixed and does not have completely segregated domains of OA and ODPA. Finally, we show that the unsaturated chains of OA seed disorder within the ligand shell.
The ability to control fundamental properties (e.g., particle size, surface structure, and metal-oxide interface) in order to design highly selective heterogeneous catalysts would greatly reduce energy intensive separations. Particle size dependence (i.e., structure sensitivity) upon selectivity can now be examined with well defined nanoparticles (NPs) because of advances in synthetic chemistry. Colloidal chemistry has provided means for synthesizing monodisperse Pt NPs as small as {approx}2 nm. Using a dendrimer templated approach, Pt NPs smaller than 1 nm--a new size regime for studying size induced effects in heterogeneous catalysis--can be synthesized (Scheme 1). In this contribution, we report that ring opening for pyrrole hydrogenation is distinctly different for Pt NPs smaller than 2 nm. This insight has not been demonstrated for hydrogenation of cyclic heteroatom bonds to the best of our knowledge. This finding adds fundamental insight into hydrodenitrogenation (HDN) chemistry, which is important for fuel processing and involves removal of N-containing organics. Advances in HDN catalysis are needed to meet new fuel quality regulations because N-containing organics inhibit hydrodesulfurization (HDS) through competitive adsorption and poison acid catalysts, which are used for downstream processing and as supports for HDS catalysts. Pyrrole was selected as the reactant because organics with 5-member N-containing rings are the most common components in fuel.
Platinum nanocubes and nanopolyhedra with tunable size from 5 to 9 nm were synthesized by controlling the reducing rate of metal precursor ions in a one-pot polyol synthesis. A two-stage process is proposed for the simultaneous control of size and shape. In the first stage, the oxidation state of the metal ion precursors determined the nucleation rate and consequently the number of nuclei. The reaction temperature controlled the shape in the second stage by regulation of the growth kinetics. These well-defined nanocrystals were loaded into MCF-17 mesoporous silica for examination of catalytic properties. Pt loadings and dispersions of the supported catalysts were determined by elemental analysis (ICP-MS) and H2 chemisorption isotherms, respectively. Ethylene hydrogenation rates over the Pt nanocrystals were independent of both size and shape and comparable to Pt single crystals. For pyrrole hydrogenation, the nanocubes enhanced ring-opening ability and thus showed a higher selectivity to n-butylamine as compared to nanopolyhedra.
The reaction of CO and O 2 with submonolayer and multilayer CoO x films on Pt(111), to produce CO 2 , was investigated at room temperature in the mTorr pressure regime. Here, using operando ambient pressure X-ray photoelectron spectroscopy and high pressure scanning tunneling microscopy, as well as density functional theory calculations, we found that the presence of oxygen vacancies in partially oxidized CoO x films significantly enhances the CO oxidation activity to form CO 2 upon exposure to mTorr pressures of CO at room temperature. In contrast, CoO films without O-vacancies are much less active for CO 2 formation at RT, and CO only adsorbed in the form of carbonate species that are stable up to 260 °C. On submonolayer CoO x islands, the carbonates form preferentially at island edges, deactivating the edge sites for CO 2 formation, even while the reaction proceeds inside the islands. These results provide a detailed understanding of CO oxidation pathways on systems where noble metals such as Pt interact with reducible oxides.
We demonstrate that the single-site catalyst Pt 1 /CeO 2 greatly enhances the selectivity of cyclization and aromatization in the n -hexane reforming reaction. Specifically, the selectivity of single-site Pt 1 /CeO 2 toward both cyclization and aromatization is above 86% at 350 °C. The turnover frequency of Pt 1 /CeO 2 is 58.8 h -1 at 400 °C, which is close to that of Pt cluster/CeO 2 (61.4 h -1 ) and much higher than that of Pt nanoparticle/CeO 2 with Pt sizes of 2.5 and 7 nm. On the basis of the catalytic results for methylcyclopentane reforming, the dehydrocyclization and further aromatization of n -hexane are attributed to the prominent adsorption of ring intermediate products on the single-site Pt 1 /CeO 2 catalysts. On the other side, with the multiple Pt adjacent active sites, the cluster and nanoparticle Pt/CeO 2 samples favor the C-C bond cracking reaction. Ultimately, this in-depth study unravels the principles of hydrocarbon activation with different Pt sizes and represents a key step toward the rational design of new heterogeneous catalysts.
Single-site catalysts have drawn broad attention in catalysis because of their maximum atomic utilization and unique catalytic performance. Early work in our group has shown a 40-fold higher activity of methanol decomposition over single-site Pt 1 /CeO 2 catalyst than CeO 2 supported 2.5 nm Pt nanoparticles, while a molecular-level understanding of such enhancement is lacking. Herein, the reaction mechanism of methanol decomposition over Pt 1 /CeO 2 was carefully investigated using in situ DRIFTS, and a reaction pathway was proposed. Methanol molecules were dissociatively adsorbed on nanoceria support first, followed by the diffusion of as-formed methoxy species onto Pt single sites where the dehydrogenation occurs and results in the weakly bonded CO. The ease of methanol dissociative adsorption on nanoceria support and the tailored electronic property of Pt 1 via the metal-support interaction are believed to be strongly correlated with the high activity of Pt 1 /CeO 2 .