SEARCH · Engineering Papers

Results for “Fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Evaluation of fatigue-crack growth rates by polynomial curve fitting

Fundamental characterization of the constant-amplitude fatigue crack propagation is achieved by an analysis of the rate of change of crack length with change in number of applied loading cycles, defining the rate values such that they are consistent with the basic assumption of smoothness and continuity in the fatigue crack growth process. The technique used to satisfy the analytical conditions and minimize the effects of local material anomalies and experimental errors is that of fitting a smooth curve to the entire set of basic data by least square regression. This yields a well-behaved function relating the number of cycles to the crack length. By taking the first derivative of the function, the crack growth rate is obtained for each point. The class of curve fitting functions used in the analysis is the polynomial of degree n.

Davies, K. B.↗

NASA NTRS1972

A curve fitting method for solving the flutter equation

A curve fitting approach was developed to solve the flutter equation for the critical flutter velocity. The psi versus nu curves are approximated by cubic and quadratic equations. The curve fitting technique utilized the first and second derivatives of psi with respect to nu. The method was tested for two structures, one structure being six times the total mass of the other structure. The algorithm never showed any tendency to diverge from the solution. The average time for the computation of a flutter velocity was 3.91 seconds on an IBM Model 50 computer for an accuracy of five per cent. For values of nu close to the critical root of the flutter equation the algorithm converged on the first attempt. The maximum number of iterations for convergence to the critical flutter velocity was five with an assumed value of nu relatively distant from the actual crossover.

Cooper, J. L.↗

NASA NTRS1975

Analytical and experimental investigation of fatigue in a sheet specimen with an interference-fit bolt

A fatigue analysis, based on finite-element calculations and fatigue tests, was conducted for an aluminum-alloy sheet specimen with a steel interference-fit bolt. The stress analysis of the region near the bolt hole showed that the beneficial effect of an interference-fit bolt can be interpreted as the combined result of two effects: (1) load transfer through the bolt and (2) the compressive interference stresses in the sheet. Results of the fatigue tests show that progressively higher interference levels produced longer fatigue lives. The tests also show that a high level of interference prevents fretting at the bolt-sheet interface and that interferences larger than this level produced little additional improvement in fatigue life.

Crews, J. H., Jr.↗

NASA NTRS1975

An interactive graphics program to retrieve, display, compare, manipulate, curve fit, difference and cross plot wind tunnel data

The Aerodynamic Data Analysis and Integration System (ADAIS), developed as a highly interactive computer graphics program capable of manipulating large quantities of data such that addressable elements of a data base can be called up for graphic display, compared, curve fit, stored, retrieved, differenced, etc., was described. The general nature of the system is evidenced by the fact that limited usage has already occurred with data bases consisting of thermodynamic, basic loads, and flight dynamics data. Productivity using ADAIS of five times that for conventional manual methods of wind tunnel data analysis is routinely achieved. In wind tunnel data analysis, data from one or more runs of a particular test may be called up and displayed along with data from one or more runs of a different test. Curves may be faired through the data points by any of four methods, including cubic spline and least squares polynomial fit up to seventh order.

Elliott, R. D.↗

NASA NTRS1977

Two-body coordinate system generation using body-fitted coordinate system and complex variable transformation

Attempts are made to generate acceptable coordinate systems for two-body configurations. The first method to be tried was to use the body-fitted coordinate system technique to obtain the best system. This technique alone did not produce very good results, so another approach was investigated. This new approach involved using a combination of the body fitted coordinate system procedure and a complex variable transformation method that was used successfully in conformal mapping.

Long, W. S.↗

NASA NTRS1977

TOMCAT - A code for numerical generation of boundary-fitted curvilinear coordinate systems on fields containing any number of arbitrary two-dimensional bodies

A method for automatic generation of boundary-fitted curvilinear coordinate systems, where the transformed coordinates are solutions of an elliptic differential system in the physical plane, and where the coordinate lines are coincident with all boundaries of a general multiply-connected, two-dimensional region containing any number of arbitrarily shaped bodies, and is described along with a suitable computer code for implementing the method. Any partial differential system can be solved on the boundary-fitted coordinate system by appropriate transformations. The transformed equations are approximated by finite differences and solved numerically in the transformed plane. All computations, whether for generating coordinate system or then solving the transformed equations, can be done on a rectangular field with square mesh with no interpolation required on the boundaries. The physical boundaries may even be time-dependent.

Thompson, J. F.↗

NASA NTRS1978

Numerical solution of flow problems using body-fitted coordinate systems

The technique of boundary-fitted coordinate systems is based on a method of automatic numerical generation of a general curvilinear coordinate system having a coordinate line coincident with each boundary of a general multi-connected region containing any number of arbitrarily shaped bodies. Once the curvilinear coordinate system is generated, any partial differential system of interest can be solved on this coordinate system by transforming the equations and solving the resulting system in finite difference approximation on the rectangular transformed plane. This method of automatic body-fitted curvilinear coordinate generation is used to construct finite-difference solutions of the full, time dependent Navier-Stokes equations for the unsteady viscous flow about arbitrary two-dimensional airfoils, or any other two-dimensional bodies. Finally, initial results for three-dimensional applications are also presented.

Thompson, J. F.↗

NASA NTRS1980

Generation of orthogonal boundary-fitted coordinate systems

A method is presented for computing orthogonal boundary fitted coordinate systems for geometries with coordinate distributions specified on all boundaries. The system which has found most extensive use in generating boundary fitted grids is made up of Poisson equations, of which the functions P and Q provide a means for controlling the spacing and density of grid lines in the coordinate system. While questions remain concerning the existence and uniqueness of orthogonal systems, the generating method presented adds to the available, useful techniques for constructing these systems.

Coleman, R. M.↗

NASA NTRS1980

A three-dimensional body-fitted coordinate system for flow field calculations on asymmetric nosetips

A three dimensional body-fitted coordinate system developed for use in the calculation of inviscid flows over ablated, asymmetric reentry vehicle nosetips is described. Because of the potential geometric asymmetries, no standard coordinate system (e.g., spherical, axisymmetric reference surface-normal) is capable of being closely aligned with the nosetip surface. To generate a 3-D, body-fitted coordinate system an analytic mapping procedure is applied that is conformal within each meridional plane of the nosetip; these transformations are then coupled circumferentially to yield a three dimensional coordinate system. The mappings used are defined in terms of hinge points, which are points selected to approximate the body contours in each meridional plane. The selection of appropriate hinge points was automated to facilitate the use of the resulting nosetip flow field code.

Hall, D. W.↗

NASA NTRS1981

An Investigation of Assembly and Performance of a Resistoflex Dynatube 1/4 Inch Fitting

Installation of titanium (6Al-4V) threaded fittings on 1/4 in. tubing is sensitive to workmanship and to the state of repair of the installation tooling. Tooling with very slight out-of-specification imperfections produces less than optimum swaged fittings. A significant quantity of samples were fabricated and X-rays were used to determine the depth of swage. Joint performance was assessed through static and dynamic testing.

Ehl, J. H.↗

NASA NTRS1984

Fitting Flexible Coverings to Contoured Surfaces

Method using two transparent plastic sheets and polyethylene foam spacer produces flat templates from contoured surfaces. Once prepared, templates laid flat, and insulation inserted between two templates cut to shape to fit contoured surface. Sections of insulation prepared by contour-transferring technique fit contoured surfaces precisely. Procedure used for tailoring protective covers or for installation of vibrationabsorbing material over contoured surfaces.

Helman, D. D.↗

NASA NTRS1982

Fitting multidimensional splines using statistical variable selection techniques

This report demonstrates the successful application of statistical variable selection techniques to fit splines. Major emphasis is given to knot selection, but order determination is also discussed. Two FORTRAN backward elimination programs using the B-spline basis were developed, and the one for knot elimination is compared in detail with two other spline-fitting methods and several statistical software packages. An example is also given for the two-variable case using a tensor product basis, with a theoretical discussion of the difficulties of their use.

Smith, P. L.↗

NASA NTRS1982

Curve fitting and modeling with splines using statistical variable selection techniques

The successful application of statistical variable selection techniques to fit splines is demonstrated. Major emphasis is given to knot selection, but order determination is also discussed. Two FORTRAN backward elimination programs, using the B-spline basis, were developed. The program for knot elimination is compared in detail with two other spline-fitting methods and several statistical software packages. An example is also given for the two-variable case using a tensor product basis, with a theoretical discussion of the difficulties of their use.

Smith, P. L.↗

NASA NTRS1982

Proceedings of the NASA Workshop on Surface Fitting

Surface fitting techniques and their utilization are addressed. Surface representation, approximation, and interpolation are discussed. Along with statistical estimation problems associated with surface fitting.

Guseman, L. F., Jr.↗

NASA NTRS1983

Latch fittings for the scientific instruments on the space telescope

Latch fittings which kinematically mount the replaceable scientific instruments onto the Space Telescope must maintain precise alignment and thermal stability for on-orbit observations. Design features which are needed to meet stringent criteria include the use of ceramic isolators for thermal and electrical insulation, materials with different coefficients of thermal expansion for athermalization, precision manufacturing procedures, and extremely tight tolerances. A specific latch fitting to be discussed is a ball-and-socket design. In addition, testing, crew aids, and problems will be covered.

Dozier, J. D.↗

NASA NTRS1983

Fitting voltage curves with an electrochemically derived equation

Previous work is refined and extended to describe the discharge curve of Ni-Cd cells. Several models are discussed which are based on chronopotentiometry theory and on a thermodynamic approach. Emphasis is placed on improvement of the fit for the initial portion of discharge. Equations are presented which improve the fit for all regions of the discharge curve.

Spritzer, M. S.↗

NASA NTRS1982

On the statistical uncertainties associated with line profile fitting

The paper considers the statistical uncertainties in the best-fit parameters associated with the fitting of observational data by model line profiles of specific form. The parameters involved are amplitude, center, and width. A general procedure is described for any profile type of parametric form. The case of Gaussian profiles is treated in detail, and numerical solutions are presented for equally spaced data of equal weight. Approximate analytical solutions are derived that give good general agreement with the numerical solutions over the whole range of interest. Approximate solutions are also obtained for the case of Lorentzian profiles. It is shown that the Lorentzian results can be used in conjunction with the Gaussian results to estimate the corresponding parameter uncertainties in the case of the general Voigt profile.

Landman, D. A.↗

NASA NTRS1984

Spectral methods for the Euler equations: Chebyshev methods and shock-fitting

The Chebyshev spectral collocation method for the Euler gas-dynamic equations is described. It is used with shock fitting to compute several two-dimensional, gas-dynamic flows. Examples include a shock-acoustic wave interaction, a shock/vortex interaction, and the classical blunt body problem. With shock fitting, the spectral method has a clear advantage over second order finite differences in that equivalent accuracy can be obtained with far fewer grid points.

Hussaini, M. Y.↗