Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Euler flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

A streamwise upwind algorithm for the Euler and Navier-Stokes equations applied to transonic flows

A new algorithm was developed for the Euler and Navier-Stokes equations that uses upwind differencing based on the streamwise direction. This algorithm is time accurate and can be used in codes for calculating unsteady transonic flows over wings. Such codes can be used for the flutter analysis of wings. In this algorithm, the coordinate system is locally rotated to align with the streamwise direction. For differencing the convective terms in the streamwise direction, a new form of flux splitting is employed, in which the biasing depends on the local Mach number. In the plane perpendicular to the stream direction, the new flux splitting uses the condition of no flow in that local plane. By using a locally rotated coordinate system, the convective flux vector biasing depends on the total Mach number. Hence, the switching of the flux vector biasing occurs across shock waves and the proper domain of dependence is used in supersonic regions. For comparison, many other upwind methods switch differencing based on Mach number of shock wave in multidimensional flows. The formulas for the convective flux vector differencing do not contain any user specified parameters. So, the amount of numerical dissipation is automatically determined.

Goorjian, P. M.↗
NASA NTRS1976

Finite-volume solution of the Euler equations for steady three-dimensional transonic flow

A numerical finite-volume method is proposed for solving the Euler equations of a steady three-dimensional flow. The subsonic regions embedded in steady supersonic flow about aircraft are computed by introducing a time-dependent coordinate system that maps the fuselage and wing into one coordinate surface. The suitability of the method to a delta-winged aircraft is demonstrated, and its applicability to rectangular-winged aircraft and problems in internal transonic flow is pointed out.

Rizzi, A.↗
NASA NTRS1992

Finite element Euler calculations of unsteady transonic cascade flows

A Galerkin finite element procedure incorporating an explicit Runge-Kutta time-stepping scheme has been developed in this work to solve unsteady transonic flow in cascades. The computational domain is discretized by a globally unstructured but locally structured blade-fitted deformable mesh. The Galerkin approximation is applied to the unsteady Euler equations based on a mixed Eulerian-Lagrangian description. The semi-discretized equations are integrated forward in time using a multistage Runge-Kutta scheme. An artificial dissipation operator of the type proposed by Jameson is adapted in the current scheme to capture shocks and suppress nonphysical oscillations. Phase-shifted boundary conditions are used to reduce the computational domain to a single reference passage. Results for both steady and unsteady transonic flows through cascades are presented and compared to existing finite volume solutions.

Hsiao, Chingteng↗
NASA NTRS1994

On the vortical-flow-prediction capability of an unstructured-grid Euler solver

The results from a concentrated computational effort are presented with the primary objective being directed at evaluating the vortical-flow-prediction capability of an unstructured-grid Euler solver. Both viscous and inviscid solutions, obtained from an established structured-grid method, along with experimental wind-tunnel data are used as benchmark measures to assess the validity of the unstructured-grid Euler results. Viscous effects on vortical flows are first identified by comparing the viscous and inviscid solutions obtained from the structured-grid method. Computational data analysis is then presented which reveals excellent correlations between the inviscid structured and unstructured-grid results in terms of off-surface flow structures, surface pressure distribution, and the predicted longitudinal aerodynamic characteristics. The sensitivity of the unstructured-grid inviscid solutions to grid refinement is also discussed along with an analysis of the convergence and performance characteristics for each method.

Unstructured grid↗
NASA NTRS1994

On the Vortical-Flow Prediction Capability of an Unstructured-Grid Euler Solver

The results from a concentrated computational effort are presented with the primary objective being directed at evaluating the vortical-flow-prediction capability of an unstructured-grid Euler solver. Both viscous and inviscid solutions, obtained from an established structured-grid method, along with an experimental wind-tunnel data are used as bench-mark measures to assess the validity of the unstructured-grid Euler results. Viscous effects on vortical flows are first identified by comparing the viscous and inviscid solutions obtained form the structured-grid method. Computational data analysis are then presented which reveal excellent correlations between the inviscid structured and unstructured-grid results in terms of off-surface flow structures, surface pressure distribution and the predicted longitudinal aerodynamic characteristics. The sensitivity of the unstructured-grid inviscid solutions to grid refinement is also discussed along with an analysis of the convergence and performance characteristics for each method.

Unstructured grid↗
NASA NTRS2006

Rapid Aeroelastic Analysis of Blade Flutter in Turbomachines

The LINFLUX-AE computer code predicts flutter and forced responses of blades and vanes in turbomachines under subsonic, transonic, and supersonic flow conditions. The code solves the Euler equations of unsteady flow in a blade passage under the assumption that the blades vibrate harmonically at small amplitudes. The steady-state nonlinear Euler equations are solved by a separate program, then equations for unsteady flow components are obtained through linearization around the steady-state solution. A structural-dynamics analysis (see figure) is performed to determine the frequencies and mode shapes of blade vibrations, a preprocessor interpolates mode shapes from the structural-dynamics mesh onto the LINFLUX computational-fluid-dynamics mesh, and an interface code is used to convert the steady-state flow solution to a form required by LINFLUX. Then LINFLUX solves the linearized equations in the frequency domain to calculate the unsteady aerodynamic pressure distribution for a given vibration mode, frequency, and interblade phase angle. A post-processor uses the unsteady pressures to calculate generalized aerodynamic forces, response amplitudes, and eigenvalues (which determine the flutter frequency and damping). In comparison with the TURBO-AE aeroelastic-analysis code, which solves the equations in the time domain, LINFLUX-AE is 6 to 7 times faster.

Trudell, J. J.↗
NASA NTRS1986

Improved Euler analysis of advanced turboprop propeller flows

An implicit approximate factorization scheme in conjunction with a new boundary treatment was used to compute the inviscid flow field about an advanced high-speed propeller. The method of characteristics was used to apply impermeable boundary conditions. The convergence history of numerical calculations shows substantial decrease in the residual error decay. Euler solutions were computed for SR-3 propeller geometry and the results were compared with the experimental data and previous numerical results.

Yamamoto, O.↗
NASA NTRS1985

A 3-dimensional Navier-Stokes-Euler code for blunt-body flow computations

The shock-layer flowfield is obtained with or without viscous and heat-conducting dissipations from the conservative laws of fluid dynamics equations using a shock-fitting implicity finite-difference technique. The governing equations are cast in curvilinear-orthogonal coordinates and transformed to the domain between the shock and the body. Another set of equations is used for the singular coordinate axis, which, together with a cone generator away from the stagnation point, encloses the computation domain. A time-dependent alternating direction implicit factorization technique is applied to integrate the equations with local-time increment until a steady solution is reached. The shock location is updated after the flowfield computation, but the wall conditions are implemented into the implicit procedure. Innovative procedures are introduced to define the initial flowfield, to treat both perfect and equilibrium gases, to advance the solution on a coarse-to-fine grid sequence, and to start viscous flow computations from their corresponding inviscid solutions. The results are obtained from a grid no greater than 28 by 18 by 7 and converged within 300 integration steps. They are of sufficient accuracy to start parabolized Navier-Stokes or Euler calculations beyond the nose region, to compare with flight and wind-tunnel data, and to evaluate conceptual designs of reentry spacecraft.

Li, C. P.↗
NASA NTRS1983

Prediction of high speed propeller flow fields using a three-dimensional Euler analysis

To overcome the limitations of classical propeller theory, a computer program, NASPROP-E, was developed which solves for the flow field surrounding a multibladed propeller and axisymmetric nacelle combination using a finite difference method. The governing equations are the three dimensional unsteady Euler equations written in a cylindrical coordinate system. They are marched in time until a steady state solution is obtained. The Euler equations require no special treatment to model the blade work vorticity. The equations are solved using an implicit approximate factorization method. Numerical results are presented which have greatly increased the understanding of high speed propeller flow fields. Numerical results for swirl angle downstream of the propeller and propeller power coefficient are higher than experimental results. The radial variation of coefficient are higher than experimental results. The radial variation of swirl angle, however, is in reasonable agreement with the experimental results. The predicted variation of power coefficient with blade angle agrees very well with data.

Bober, L. J.↗
NASA NTRS1984

Flow prediction for propfan configurations using Euler equations

An Euler code has been developed for the analysis of a wing-mounted propfan configuration. Surface-fitted grids are used to represent the wing, fuselage, and nacelle geometry. The propeller is simulated by an actuator disk along a computational plane. A grid embedding technique is employed to capture detailed flow field resolution in the vicinity of the engine exhaust plume. Results of a NASA turboprop configuration are compared with test data. Specific issues on grid embedding and methods of resolving them are discussed.

Yu, N. J.↗
NASA NTRS1988

Computational methods for the problems of the tip vortex

The tip vortex problem for helicopter rotors in transonic flow was studied. The first model was that of potential flow past a single blade in parallel transonic flow. The incidence on the wing of a vortex sheet trailing from a blade in front was studied by modeling the incident sheet by a single vortex filament. A 3-D potential flow code was written to incorporate the usual boundary conditions at infinity together with the model of such a vortex filament and to analyze the resulting flow over the wing. The code was used to study the effect of the vortex filament on the production of shocks at the tip of the wing. Another problem studied within the framework of potential flow theory was the rollup of the vortex sheet behind the wing. A comparison was made of flow models described by the potential equation, by the Euler equations for steady flow, and by the Navier-Stokes equations. The question was also studied as to whether there is an advantage in solving the Navier-Stokes equations rather than the Euler equations for steady flow.

Garabedian, Paul R.↗
NASA NTRS1978

Transonic flow over the NACA 64A006 with an oscillating flap-calculations based on the Euler equations

Exploratory calculations of transonic flows over the airfoil with a quarter-chord oscillating flap were made using a program which obtains approximate solutions to the Euler equations with an explicit, shock-capturing, finite-difference scheme. The calculations, essentially inviscid and for the airfoil at zero angle-of-attack in a free-stream, are at Mach numbers and reduced frequencies which were tested in experiments by Tijdeman. The oscillatory lifts from analogus calculations by various investigators generally agree with one another better than they agree with Tijdeman's data. Inclusion in the calculations of an approximate modelling of boundary conditions expected at slotted wind tunnel walls tends to shift some of the results closer to the experimental values.

Magnus, R. J.↗
NASA NTRS1986

Transonic flow solutions using a composite velocity procedure for potential, Euler and RNS equations

Solutions for transonic viscous and inviscid flows using a composite velocity procedure are presented. The velocity components of the compressible flow equations are written in terms of a multiplicative composite consisting of a viscous or rotational velocity and an inviscid, irrotational, potential-like function. This provides for an efficient solution procedure that is locally representative of both asymptotic inviscid and boundary layer theories. A modified conservative form of the axial momentum equation that is required to obtain rotational solutions in the inviscid region is presented and a combined conservation/nonconservation form is applied for evaluation of the reduced Navier-Stokes (RNS), Euler and potential equations. A variety of results is presented and the effects of the approximations on entropy production, shock capturing, and viscous interaction are discussed.

Gordnier, R. E.↗
NASA NTRS1989

Transonic flow solutions using a composite velocity procedure for potential, Euler and RNS equations

Solutions for transonic viscous and inviscid flows using a composite velocity procedure are presented. The velocity components of the compressible flow equations are written in terms of a multiplicative composite consisting of a viscous or rotational velocity and an inviscid, irrotational, potential-like function. This provides for an efficient solution procedure that is locally representative of both asymptotic inviscid and boundary layer theories. A modified conservative form of the axial momentum equation that is required to obtain rotational solutions in the inviscid region is presented and a combined conservation/nonconservation form is applied for evaluation of the reduced Navier-Stokes (RNS), Euler and potential equations. A variety of results is presented and the effects of the approximations on entropy production, shock capturing, and viscous interaction are discussed.

Gordnier, R. E.↗
NASA NTRS1986

An Euler aerodynamic method for leading-edge vortex flow simulation

The current capabilities and the future plans for a three dimensional Euler Aerodynamic Method are described. The basic solution algorithm is based on the finite volume, Runge-Kutta pseudo-time-stepping scheme of FLO-57. Several modifications to improve accuracy and computational efficiency were incorporated and others are being investigated. The computer code is used to analyze a cropped delta wing at 0.6 Mach number and an arrow wing at 0.85 Mach number. Computed aerodynamic parameters are compared with experimental data. In all cases, the configuration is impulsively started and no Kutta condition is applied at sharp edges. The results indicate that with additional development and validation, the present method will be a useful tool for engineering analysis of high speed aircraft.

Raj, P.↗
NASA NTRS1987

Grid generation and inviscid flow computation about cranked-winged airplane geometries

An algebraic grid generation procedure that defines a patched multiple-block grid system suitable for fighter-type aircraft geometries with fuselage and engine inlet, canard or horizontal tail, cranked delta wing and vertical fin has been developed. The grid generation is based on transfinite interpolation and requires little computational power. A finite-volume Euler solver using explicit Runge-Kutta time-stepping has been adapted to this grid system and implemented on the VPS-32 vector processor with a high degree of vectorization. Grids are presented for an experimental aircraft with fuselage, canard, 70-20-cranked wing, and vertical fin. Computed inviscid compressible flow solutions are presented for Mach 2 at 3.79, 7 and 10 deg angles of attack. Conmparisons of the 3.79 deg computed solutions are made with available full-potential flow and Euler flow solutions on the same configuration but with another grid system. The occurrence of an unsteady solution in the 10 deg angle of attack case is discussed.

Eriksson, L.-E.↗