Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Entropy Stable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Critical phenomena of the layered ferrimagnet Mn 3 Si 2 Te 6 following proton irradiation

The critical phenomena and magnetic entropy of the quasi-2D ferrimagnetic crystal, Mn 3 Si 2 Te 6 (MST), is analyzed along the easy axis (H || ab) as a function of proton irradiance. The critical exponents β and γ do not fall into any particular universality class upon proton irradiation. However, for pristine and irradiated samples, the critical exponents lie closer to mean field-like interactions; therefore, long-range interactions are presumed to be sustained in MST. The effective spatial dimensionality reveals that MST remains at d =3 under proton irradiation, whereas spin dimensionality transitions from an initial n =1 to n =2 and n =3 for 1 × 10 15 and 5 × 10 15 H + /cm 2 , indicating XY and Heisenberg interactions, respectively. The spin correlation function reveals an increase in magnetic correlations at 5 × 10 15 H + /cm 2 . Maximum change in magnetic entropy at 3 T is the largest for 5 × 10 15 H + /cm 2 at 2.45 J/kg K, in comparison to 1.60 J/kg K for pristine MST. These results intriguingly align with previous findings on MST where magnetization increased by ~50% at 5 × 10 15 H + /cm 2 , in comparison to its pristine counterpart [Martinez et al., Appl. Phys. Lett. 116, 172404 (2020)]. Magnetic entropy derived from heat capacity analysis shows no large deviations across the proton irradiated samples suggesting that the antiferromagnetic (AFM) coupling between the Mn sites is stable even after proton irradiation. This implies that magnetization is enhanced through a strengthening of the super-exchange interaction between Mn atoms mediated through Te rather than a weakening of the AFM component.

2D materials↗

1/R correction to gravity in the early universe

To explain the accelerated expansion of the late universe, the 1/R correction to Einstein gravity is usually considered, where R is the Ricci scalar. This correction term, if stable, is generally believed to be negligible during inflation. However, if the 1/R term is inflaton dependent, it will dramatically change the story of inflation. The entropy perturbation will naturally appear and drive the evolution of curvature perturbation outside the Hubble horizon. In a large class of models, the entropy perturbation can be made nearly scale invariant. In Einstein gravity the single-field inflation with a quartic potential has been ruled out by recent observations, but it revives when the 1/R term is turned on. The evolution of non-Gaussianities on a large scale are also studied and applied to inflation with 1/R correction. In some specific models, a large non-Gaussianity can be naturally generated outside the horizon. A recent study ruled out almost all f(R) models during the matter-dominated phase. Taking this into consideration, we are left with a limited class of model which recovers the Einstein gravity soon after reheating.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evolution of microstructure and strength of a high entropy alloy undergoing the strain-induced martensitic transformation

In a recent work, we have reported outstanding strength and work hardening exhibited by a metastable high entropy alloy (HEA), Fe 42 Mn 28 Co 10 Cr 15 Si 5 (in at. %), undergoing the strain-induced martensitic transformation from metastable gamma austenite (γ) to stable epsilon martensite (ε). However, the alloy exhibited poor ductility, which was attributed to the presence of the brittle sigma (σ) phase in its microstructure. The present work reports the evolution of microstructure, strength, and ductility of a similar HEA, Fe 38.5 Mn 20 Co 20 Cr 15 Si 5 Cu 1.5 (in at. %), designed to suppress the formation of σ phase. A cast and then rolled plate of the alloy was processed into four conditions by annealing for 10 and 30 min at 1100 °C and by friction stir processing (FSP) at tool rotation rates of 150 and 400 revolutions per minute (RPM) to facilitate detailed examinations of variable initial grain structures. Neutron diffraction and electron microscopy were employed to characterize the microstructure and texture evolution. The initial materials had variable grain size but nearly 100% γ structure. Diffusionless strain induced γ→ε phase transformation took place under compression with higher rate initially and slower rate at the later stages of deformation, independent on the initial grain size. The transformation facilitated part of plastic strain accommodation and rapid strain hardening owing to a transformation-induced dynamic Hall-Petch-type barrier effect, increase in dislocation density, and texture. Here, the peak strength of nearly 2 GPa was achieved under compression using the structure created by double pass FSP (150 RPM followed by 150 RPM). Remarkably, the tensile elongation exhibited by the alloy was nearly 20% with fracture surfaces featuring a combination of ductile dimples and cleavage.

36 MATERIALS SCIENCE↗

Exploring the First High-Entropy Thin Film Libraries: Composition Spread-Controlled Crystalline Structure

Thin films of two types of high-entropy oxides (HEOs) have been deposited on 76.2 mm Si wafers using combinatorial sputter deposition. In one type of the oxides, (MgZnMnCoNi)O x , all the metals have a stable divalent oxidation state and similar cationic radii. In the second type of oxides, (CrFeMnCoNi)O x , the metals are more diverse in the atomic radius and valence state, and have good solubility in their sub-binary and ternary oxide systems. Therefore, the resulting HEO thin films were characterized using several high-throughput analytical techniques. The microstructure, composition, and electrical conductivity obtained on defined grid maps were obtained for the first time across large compositional ranges. The crystalline structure of the films was observed as a function of the metallic elements in the composition spreads, that is, the Mn and Zn in (MgZnMnCoNi)O x and Mn and Ni in (CrFeMnCoNi)O x . The (MgZnMnCoNi)O x sample was observed to form two-phase structures, except single spinel structure was found in (MgZnMnCoNi)O x over a range of Mn > 12 at. % and Zn < 44 at. %, while (CrFeMnCoNi)O x was always observed to form two-phase structures. Composition-controlled crystalline structure is not only experimentally demonstrated but also supported by density function theory calculation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Topological black holes in Horava-Lifshitz gravity

We find topological (charged) black holes whose horizon has an arbitrary constant scalar curvature 2k in Horava-Lifshitz theory. Without loss of generality, one may take k=1, 0, and -1. The black hole solution is asymptotically anti-de Sitter with a nonstandard asymptotic behavior. Using the Hamiltonian approach, we define a finite mass associated with the solution. We discuss the thermodynamics of the topological black holes and find that the black hole entropy has a logarithmic term in addition to an area term. We find a duality in Hawking temperature between topological black holes in Horava-Lifshitz theory and Einstein's general relativity: the temperature behaviors of black holes with k=1, 0, and -1 in Horava-Lifshitz theory are, respectively, dual to those of topological black holes with k=-1, 0, and 1 in Einstein's general relativity. The topological black holes in Horava-Lifshitz theory are thermodynamically stable.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evaluation of Equiatomic CrMnFeCoNiCu System and Subsequent Derivation of a Non-Equiatomic MnFeCoNiCu Alloy

Investigation into non-equiatomic high-entropy alloys has grown in recent years due to questions about the role of entropy stabilization in forming single-phase solid solutions. Non-equiatomic alloys have been shown to retain the outstanding mechanical properties exhibited by their equiatomic counterparts and even improve electrical, thermal, and magnetic properties, albeit with relaxed composition bounds. However, much remains to understand the processing–structure–property relationships in all classes of so-called high-entropy alloys (HEAs). Here, we are motivated by the natural phenomena of crystal growth and equilibrium conditions to introduce a method of HEA development where controlled processing conditions determine the most probable and stable composition. This is demonstrated by cooling an equiatomic CrMnFeCoNiCu alloy from the melt steadily over 3 days (cooling rate ~4 °C/h). The result is an alloy containing large Cr-rich precipitates and an almost Cr-free matrix exhibiting compositions within the MnFeCoNiCu system (with trace amounts of Cr). From this juncture, it is argued that the most stable composition is within the CrMnFeCoNiCu system rather than the CrMnFeCoNi system. With further optimization and evaluation, a unique non-equiatomic alloy, Mn 17 Fe 21 Co 24 Ni 24 Cu 14 , is derived. The alloy solidifies and recrystallizes into a single-phase face-centered cubic (FCC) polycrystal. In addition to possible applications where Invar is currently utilized, this alloy can be used in fundamental studies that contrast its behavior with its equiatomic counterpart and shed light on the development of HEAs.

36 MATERIALS SCIENCE↗

Quantum utility-scale error mitigation for quantum quench dynamics in Heisenberg spin chains

Here, we implement a quantum error mitigation method termed self-mitigation, which is comparable to zero-noise extrapolation, at large scales to achieve quantum utility on near-term, noisy quantum computers. We investigate the effectiveness of several quantum error mitigation strategies, including self-mitigation, by simulating quantum quench dynamics for Heisenberg spin chains with system sizes up to 104 qubits using IBM quantum processors. In particular, we discuss the limitations of zero-noise extrapolation and the advantages offered by self-mitigation at large scales. The self-mitigation method demonstrates stable accuracy with large systems of 104 qubits comprising more than 3,000 CNOT gates. Also, we combine the discussed quantum error mitigation methods with practical entanglement entropy measuring methods, and it shows a good agreement with the theoretical estimation. Our study illustrates the usefulness of near-term noisy quantum hardware in examining the quantum quench dynamics of many-body systems at large scales and lays the groundwork for surpassing classical simulations with quantum methods prior to the development of fault-tolerant quantum computers.

97 MATHEMATICS AND COMPUTING↗

Phase diagram of power law and Lennard-Jones systems: Crystal phases

An extensive characterization of the low temperature phase diagram of particles interacting with power law or Lennard-Jones potentials is provided from Lattice Dynamical Theory. For power law systems, only two lattice structures are stable for certain values of the exponent (or softness) (A15, body centered cube (bcc)) and two more (face centered cubic (fcc), hexagonal close packed (hcp)) are always stable. Among them, only the fcc and bcc are equilibrium states. For Lennard-Jones systems, the equilibrium states are either hcp or fcc, with a coexistence curve in pressure and temperature that shows reentrant behavior. The hcp solid never coexists with the liquid. In all cases analyzed, for both power law and Lennard-Jones potentials, the fcc crystal has higher entropy than the hcp. The role of anharmonic terms is thoroughly analyzed and a general thermodynamic integration to account for them is proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Entropy and stability of phase synchronisation of oscillators on networks

I examine the role of entropy in the transition from incoherence to phase synchronisation in the Kuramoto model of N coupled phase oscillators on a general undirected network. In a Hamiltonian ‘action-angle’ formulation, auxiliary variables J{sub i} combine with the phases θ{sub i} to determine a conserved system with a 2N dimensional phase space. In the vicinity of the fixed point for phase synchronisation, θ{sub i}≈θ{sub j}, which is known to be stable, the auxiliary variables J{sub i} exhibit instability. This manifests Liouville’s Theorem in the phase synchronised regime in that contraction in the θ{sub i} parts of phase space are compensated for by expansion in the auxiliary dimensions. I formulate an entropy rate based on the projection of the J{sub i} onto eigenvectors of the graph Laplacian that satisfies Pesin’s Theorem. This leads to the insight that the evolution to phase synchronisation of the Kuramoto model is equivalent to the approach to a state of monotonically increasing entropy. Indeed, for unequal intrinsic frequencies on the nodes, the networks that achieve the closest to exact phase synchronisation are those which enjoy the highest entropy production. I compare numerical results for a range of networks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Note on self-gravitating radiation in AdS spacetime

Recently Vaganov and Hammersley investigated independently the equilibrium self-gravitating radiation in higher (d{>=}4)-dimensional, spherically symmetric anti-de Sitter space. It was found that in 4{<=}d{<=}10, there exist locally stable radiation configurations all the way up to a maximum red-shifted temperature, above which there are no solutions; there is also a maximum mass and maximum entropy configuration occurring at a higher central density than the maximal temperature configuration. Beyond their peaks the temperature, mass, and entropy undergo an infinite series of damped oscillations, which indicates the configurations in this range are unstable. In d{>=}11, the temperature, mass, and entropy of the self-gravitating configuration are monotonic functions of the central energy density, asymptoting to their maxima as the central density goes to infinity. In this paper we investigate the equilibrium self-gravitating radiation in higher-dimensional, plane-symmetric anti-de Sitter space. We find that there exist essential differences from the spherically symmetric case: In each dimension (d{>=}4), there are maximal mass (density), maximal entropy (density), and maximal temperature configurations; they do not appear at the same central energy density; the oscillation behavior appearing in the spherically symmetric case does not happen in this case; and the mass (density), as a function of the central energy density, increases first and reaches its maximum at a certain central energy density and then decreases monotonically in 4{<=}d{<=}7, while in d{>=}8, besides the maximum, the mass (density) of the equilibrium configuration has a minimum: the mass (density) first increases and reaches its maximum, then decreases to its minimum, and then increases to its asymptotic value monotonically. The reason causing the difference is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Out of equilibrium: understanding cosmological evolution to lower-entropy states

Despite the importance of the Second Law of Thermodynamics, it is not absolute. Statistical mechanics implies that, given sufficient time, systems near equilibrium will spontaneously fluctuate into lower-entropy states, locally reversing the thermodynamic arrow of time. We study the time development of such fluctuations, especially the very large fluctuations relevant to cosmology. Under fairly general assumptions, the most likely history of a fluctuation out of equilibrium is simply the CPT conjugate of the most likely way a system relaxes back to equilibrium. We use this idea to elucidate the spacetime structure of various fluctuations in (stable and metastable) de Sitter space and thermal anti-de Sitter space.

79 ASTRONOMY AND ASTROPHYSICS↗

Nanostructured Oxide-Dispersion-Strengthened CoCrFeMnNi High-Entropy Alloys with High Thermal Stability

A nanostructured oxide-dispersion-strengthened (ODS) CoCrFeMnNi high-entropy alloy (HEA) is synthesized by a powder metallurgy process. The thermal stability, including the grain size and crystal structure of the HEA matrix and oxide dispersions, is carefully investigated by X-ray diffraction (XRD) and electron microscopy characterizations after annealing at 900 °C. The limited grain growth may be attributed to Zener pinning of yttria dispersions that impede the grain boundary mobility and diffusivity. The high hardness is caused by both the fine grain size and yttria dispersions, which are also retained after annealing at 900 °C. In this study, it is implied that the combination of ODS and HEA concepts may provide a new design strategy for the development of thermally stable nanostructured alloys for extreme environments.

36 MATERIALS SCIENCE↗

All-temperature zinc batteries with high-entropy aqueous electrolyte

Electrification of transportation and rising demand for grid energy storage continue to build momentum around batteries across the globe. However, the supply chain of Li-ion batteries is exposed to the increasing challenges of resourcing essential and scarce materials. Therefore, incentives to develop more sustainable battery chemistries are growing. Here, in this paper, we show an aqueous ZnCl 2 electrolyte with introduced LiCl as supporting salt. Once the electrolyte is optimized to Li 2 ZnCl 4 ∙9H 2 O, the assembled Zn–air battery can sustain stable cycling over the course of 800 hours at a current density of 0.4 mA cm -2 between -60 °C and +80 °C, with 100% Coulombic efficiency for Zn stripping/plating. Even at -60 °C, >80% of room-temperature power density can be retained. Advanced characterization and theoretical calculations reveal a high-entropy solvation structure that is responsible for the excellent performance. The strong acidity allows ZnCl 2 to accept donated Cl - ions to form ZnCl 4 2- anions, while water molecules remain within the free solvent network at low salt concentration or coordinate with Li ions. Our work suggests an effective strategy for the rational design of electrolytes that could enable next-generation Zn batteries.

25 ENERGY STORAGE↗

Heat capacity and magnetic properties of fluoride CsFe{sup 2+}Fe{sup 3+}F{sub 6} with defect pyrochlore structure

Heat capacity, Mössbauer and Raman spectra as well as magnetic properties of fluoride CsFe{sub 2}F{sub 6} with defect pyrochlore structure were studied. In addition to recently found above room temperature three successive structural transformations Pnma-Imma-I4{sub 1}amd-Fd-3m, phase transition of antiferromagnetic nature with the 13.7 K Neel temperature and a broad heat capacity anomaly with a maximum at about 30 K were observed. The room temperature symmetry Pnma is unchanged at least down to 7 K. Simple model of indirect bond used to estimate the exchange interactions and to propose a magnetic structure model. - Graphical abstract: The ordered arrangement of Fe{sup 2+} and Fe{sup 3+} ions in high-spin states as well as antiferromagnetic phase transition followed by significant magnetic frustrations were found in pyrocholore-related CsFe{sup 2+}Fe{sup 3+}F{sub 6}. A magnetic structure was proposed using a simple model of indirect bonds. - Highlights: • The Pnma structure in pyrocholore CsFe{sub 2}F{sub 6} is stable down to helium temperature. • Mössbauer spectra confirmed the ordering of Fe{sup 2+} and Fe{sup 3+} ions. • Antiferromagnetic transformation and significant magnetic frustrations are found. • Experimental magnetic entropy agrees with entropy for Fe ions in high-spin state. • Superexchange interactions were calculated and a magnetic structure was proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Contrasting Trivalent Lanthanide and Actinide Complexation by Polyoxometalates via Solution-State NMR

Deciphering the solution chemistry and speciation of actinides is inherently difficult due to radioactivity, rarity, and cost constraints, especially for transplutonium elements. In this context, the development of new chelating platforms for actinides and associated spectroscopic techniques is particularly important. In this study, we investigate a relatively overlooked class of chelators for actinide binding, namely, polyoxometalates (POMs). We provide the first NMR measurements on americium–POM and curium–POM complexes, using one-dimensional (1D) 31 P NMR, variable-temperature NMR, and spin-lattice relaxation time (T 1 ) experiments. The proposed POM–NMR approach allows for the study of trivalent f-elements even when only microgram amounts are available and in phosphate-containing solutions where f-elements are typically insoluble. The solution-state speciation of trivalent americium, curium, plus multiple lanthanide ions (La 3+ , Nd 3+ , Sm 3+ , Eu 3+ , Yb 3+ , and Lu 3+ ), in the presence of the model POM ligand PW 11 O 39 7– was elucidated and revealed the concurrent formation of two stable complexes, [M III (PW 11 O 39 )(H 2 O) x ] 4– and [M III (PW 11 O 39 ) 2 ] 11– . Interconversion reaction constants, reaction enthalpies, and reaction entropies were derived from the NMR data. The NMR results also provide experimental evidence of the weakly paramagnetic nature of the Am 3+ and Cm 3+ ions in solution. Furthermore, the study reveals a previously unnoticed periodicity break along the f-element series with the reversal of T 1 relaxation times of the 1:1 and 1:2 complexes and the preferential formation of the long T 1 species for the early lanthanides versus the short T 1 species for the late lanthanides, americium, and curium. Furthermore, given the broad variety of POM ligands that exist, with many of them containing NMR-active nuclei, the combined POM–NMR approach reported here opens a new avenue to investigate difficult-to-study elements such as heavy actinides and other radionuclides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics and phases of nonunitary Floquet transverse-field Ising model

Inspired by current research on measurement-induced quantum phase transitions, we analyze the nonunitary Floquet transverse-field Ising model with complex nearest-neighbor couplings and complex transverse fields. Unlike its unitary counterpart, the model shows a number of steady phases, stable to integrability-breaking perturbations. Some phases have robust edge modes and/or spatiotemporal long-range orders in the bulk. The transitions between the phases have extensive entanglement entropy, whose scaling with the system size depends on the number of the real quasiparticle modes in the spectrum at the transition. In particular, the volume-law scaling appears on some critical lines, protected by pseudo-Hermiticity. Both the scaling of entanglement entropy in steady states and the evolution after a quench are compatible with the non-Hermitian generalization of the quasiparticle picture of Calabrese and Cardy at least qualitatively. Published by the American Physical Society 2024

Su, Lei (ORCID:0009000455290786)↗

Optimal Transport for Super Resolution Applied to Astronomy Imaging

Super resolution is an essential tool in optics, especially on interstellar scales, due to physical laws restricting possible imaging resolution. We propose using optimal transport and entropy for super resolution applications. We prove that the reconstruction is accurate when sparsity is known and noise or distortion is small enough. We prove that the optimizer is stable and robust to noise and perturbations. We compare this method to a state of the art convolutional neural network and get similar results for much less computational cost and greater methodological flexibility.

Rawson, Michael G.↗

Computational Analysis of the Energetic Stability of High-Entropy Structures of a Prototypical Lanthanide-Based Metal–Organic Framework

High-entropy materials are characterized by their complex compositions, typically comprising five or more elements in near-equiatomic proportions. Applying this concept to metal ions in metal−organic frameworks (MOFs) has paved the way for exploring a new class of high-entropy MOFs. While the compositional strategy of high-entropy materials leverages configurational entropy to aid thermodynamic stability, it also poses significant analytical challenges due to the vast compositional landscape and diverse phases that these materials can adopt. We present a computational study of several complexities associated with selecting potential high-entropy versions of a prototype lanthanidebased MOF. We compute the energetics of metal mixing of these heterometallic MOFs using density functional theory (DFT) and machine learning interatomic potential (MLIP) methods. The use of MLIP methods allows a systematic exploration of the convex hull of thermodynamically stable MOF structures containing up to 5 distinct metals.

Chemical structure↗