Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Simulation of the electron diffraction patterns from needle/rod-like precipitates in Al-Mg-Si alloys

The origin of the selected area electron diffraction (SAED) patterns from needle/rod-like metastable precipitates embedded in {alpha}-Al matrix in Al-Mg-Si alloys have been studied via an example of {beta}'' phase. In addition, the SAED pattern from {beta}'' phase has been simulated with significant improvement in comparison with the previous simulations. Three important factors, i.e. the 12 crystallographically equivalent variants of {beta}'' phase in the {alpha}-Al matrix due to the highly symmetric f.c.c. structure of {alpha}-Al, the coherence between {beta}'' phase and the {alpha}-Al matrix, and the double diffractions from the {alpha}-Al matrix and {beta}'' phase, are proved to contribute to the special square-shaped features in the SAED patterns from {beta}'' phase and thus fully taken into account in the simulation. An improved but simplified method for simulating the SAED patterns from needle/rod-like metastable precipitates has been developed. This method is further verified by simulating the SAED pattern from Q phase. The simulated SAED patterns from both {beta}'' and Q phases fit the experimentally determined patterns very well. - Highlights: {yields}An improved method has been developed to simulate the SADPs of Al alloys. {yields}The formation mechanism of SADPs of Al alloys has been systemically studied. {yields}Double diffraction contributes to the formation of the SADPs of Al alloys.

36 MATERIALS SCIENCE↗

A large interlaboratory electron diffraction study of monolayer graphene

Standardisation of data collection and analysis is essential to enable commercialisation of 2D materials in a wide range of technologies. Selected area electron diffraction (SAED) in the transmission electron microscope (TEM) is one of the key methods for distinguishing monolayer from bilayer and few-layer graphene by comparing the 1st and 2nd order diffraction spot intensities. Yet there are many factors that can affect the reliability of data collection and interpretation, causing the measurement of monolayer samples to deviate from the literature boundary condition of $I_{\{\bar{2}110\}}$$/$$I_{\{1\bar{1}00\}}$ < 1 for monolayer graphene (1LG). Here we present the results of a large interlaboratory SAED comparison study, where 15 international laboratories measured and analysed nominally identical samples of chemical vapour deposited graphene. Large variations were observed in the measured ratios of diffraction spot intensities, with the largest variance associated with poor quality SAED data resulting from inadequate specimen handling and storage. To inform the reliable determination of monolayer thickness from SAED patterns we provide a description of best practice for specimen handling, TEM operation, data collection and analysis. This work was undertaken within VAMAS Technical Working Area 41: Graphene and related 2D materials—Project 9, the results of which have been directly incorporated into ISO/TS 21356–2 for the characterisation of graphene sheets. We find that when this methodology is followed, 1LG can be distinguished from bilayer or thicker material with high confidence where analysis of a single SAED pattern gives $I_{\{\bar{2}110\}}$$/$$I_{\{1\bar{1}00\}}$ < 1.2, even in the absence of precise specimen tilting.

2D materials↗

Azimuthal reflection high-energy electron diffraction study of MnAs growth on GaAs(001) by molecular beam epitaxy

Azimuthal reflection high-energy electron diffraction (ARHEED) and in situ grazing incidence synchrotron x-ray diffraction techniques are employed to investigate the growth, epitaxial orientation, and interfacial structure of MnAs layers grown on GaAs(001) by molecular beam epitaxy (MBE). We demonstrate the power and reliability of ARHEED scans as a routine tool in characterizing the formation of epitaxial films. The ARHEED scans clearly reveal the formation of the rectangular MnAs unit cell during growth on GaAs(001) for a MnAs layer thickness of 2.1 {+-} 0.2 monolayers with a tensile strain along the MnAs[1120] direction. A periodic coincidence site lattice, which is known to form along the MnAs [0001] direction to release the strain due to the huge lattice mismatch ({approx}30%) also produces periodic satellites of the diffraction spots in the ARHEED scan. The formation of different epitaxial orientations of MnAs during MBE growth can be directly observed using ARHEED scans. ARHEED is demonstrated to have a resolution similar to synchrotron x-ray diffraction with a double crystal monochromator, yielding full width at half maximum values of reflections as small as 0.005 reciprocal lattice units.

36 MATERIALS SCIENCE↗

The kinematic convergent-beam electron diffraction method for nanocrystal structure determination

Kinematic convergent-beam electron diffraction KCBED is a technique capable of probing and solving the atomic structure of isolated nanocrystals as small as a few nanometers in diameter. The method was evaluated by solving the structure of a spinel crystal from three-dimensional diffraction data. The charge-flipping algorithm was used for ab initio phasing and SHELX was used for structure refinement. We discuss the relative merits of the KCBED and precession methods for nanocrystallography. © 2009 American Institute of Physics.

36 MATERIALS SCIENCE↗

Heterogeneous to homogeneous melting transition visualized with ultrafast electron diffraction

The ultrafast laser excitation of matters leads to nonequilibrium states with complex solid-liquid phase-transition dynamics. In this paper, we used electron diffraction at mega–electron volt energies to visualize the ultrafast melting of gold on the atomic scale length. For energy densities approaching the irreversible melting regime, we first observed heterogeneous melting on time scales of 100 to 1000 picoseconds, transitioning to homogeneous melting that occurs catastrophically within 10 to 20 picoseconds at higher energy densities. We showed evidence for the heterogeneous coexistence of solid and liquid. We determined the ion and electron temperature evolution and found superheated conditions. Finally, our results constrain the electron-ion coupling rate, determine the Debye temperature, and reveal the melting sensitivity to nucleation seeds.

74 ATOMIC AND MOLECULAR PHYSICS↗

Anisotropic response of nanosized bismuth films upon femtosecond laser excitation monitored by ultrafast electron diffraction

The lattice response of 5 nm thick bismuth film to femtosecond laser excitation is probed by ultrafast electron diffraction. The transient decay time after laser excitation is greater for diffraction from (012) lattice planes compared to (110) planes and is reduced for both planes with the increased laser fluence. These results indicate that different energy coupling mechanisms to the lattice occur depending on the crystal direction. The behavior of the diffraction peak width indicates partial disorder of the film upon photoexcitation that increases together with the laser fluence.

36 MATERIALS SCIENCE↗

Ultra-low Emittance Photocathodes for Accelerators and Femtosecond Electron Diffraction

To advance low emittance photocathodes suitable for accelerators and ultrafast electron diffraction the following directions have been investigated: 1) growth and characterization of alkali photocathodes in the new regime where their intrinsic emittance is limited by the material lattice temperature; 2) extending Monte Carlo electron transport modeling in photocathodes to cryogenic temperatures; 3) numerical simulations of sharp photo-emitting tips that enhance the electric field available; and 4) exploration of new protective coatings on III-V semiconductor photocathodes as robust high efficiency low-emittance sources of electrons. The key results achieved in these four areas as enabled by this grant are highlighted in this final technical report.

42 ENGINEERING↗

Imaging the photochemistry of cyclobutanone using ultrafast electron diffraction: Experimental results

We investigated the ultrafast structural dynamics of cyclobutanone following photoexcitation at λ = 200 nm using gas-phase megaelectronvolt ultrafast electron diffraction. Our investigation complements the simulation studies of the same process within this special issue. It provides information about both electronic state population and structural dynamics through well-separable inelastic and elastic electron scattering signatures. We observe the depopulation of the photoexcited S 2 state of cyclobutanone with n3s Rydberg character through its inelastic electron scattering signature with a time constant of (0.29 ± 0.2) ps toward the S 1 state. The S 1 state population undergoes ring-opening via a Norrish Type-I reaction, likely while passing through a conical intersection with S 0 . The corresponding structural changes can be tracked by elastic electron scattering signatures. These changes appear with a delay of (0.14 ± 0.05) ps with respect to the initial photoexcitation, which is less than the S 2 depopulation time constant. This behavior provides evidence for the ballistic nature of the ring-opening once the S 1 state is reached. The resulting biradical species react further within (1.2 ± 0.2) ps via two rival fragmentation channels yielding ketene and ethylene, or propene and carbon monoxide. Furthermore, our study showcases the value of both gas-phase ultrafast diffraction studies as an experimental benchmark for nonadiabatic dynamics simulation methods and the limits in the interpretation of such experimental data without comparison with such simulations.

Carbon monoxide↗

Capturing Ring Opening in Photoexcited Enolic Acetylacetone upon Hydrogen Bond Dissociation by Ultrafast Electron Diffraction

Photoinduced biological and chemical reactions are often based on key structural transformations of a molecule driven across multiple electronic states. Acetylacetone (AcAc) is a prototypical system for complex chemical pathways involving several conical intersections (CI) and singlet–triplet intersystem crossings (ISC) characterized by distinct geometries. In the gas phase, AcAc is predominantly in a planar ring-like enolic form stabilized by a strong intramolecular O–H···O hydrogen bond. Following excitation into the S 2 (ππ*) state at 266 nm, acetylacetone undergoes rapid internal conversion followed by intersystem crossing. Such relaxation pathways are associated with structural changes including ring opening, deplanarization, and bond elongation. In this work, ultrafast electron diffraction (UED) at the SLAC MeV-UED setup is employed as a direct structural probe with a time resolution of 160 fs. Together with trajectory surface hopping simulations, analysis of the UED data provides a new perspective on the early time nuclear dynamics in acetylacetone. Specifically, AcAc is observed to undergo ring opening, deplanarization, and bond elongation all within the first 700 fs after photoexcitation. The monitored dynamics is associated mainly with the nuclear motion on the S 1 potential energy surface, formed after very rapid transfer from S 2 to S 1 , allowing AcAc to reach the conical intersection to intersystem crossing. Such time scales of nuclear motion are contrasted with the time scales of electronic transitions in AcAc that were previously characterized with spectroscopic methods, specifically internal conversion (<100 fs) and intersystem crossing (∼1.5 ps).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stacking faults in lizardites 1T from electron diffraction data and modeling of diffraction effects

Stacking faults in lizardites 1T (polytype group A) have been studied by analyzing the oblique-texture electron diffraction patterns in combination with a numerical simulation of diffraction patterns. The simulation of diffraction profiles was performed for finite (10-layer) sequences using the statistical Markov model in the quasi-homogeneous approximation. Diffraction criteria are revealed, which indicate the presence of defects in lizardite 1T; these defects are related to the change in the layer orientation by 180 Degree-Sign and displacements of adjacent layers by a/3. It is shown that in the case of the statistical distribution of defects, along with pairs of adjacent layers with layer packing features typical of polytype groups D and B, there are also sequences of layers 1T(A), correspondingly rotated by 180 Degree-Sign or displaced by a/3 and 2a/3 with respect to the layers in the 1T matrix. The data obtained give deeper insight into the variations in layer packing in lizardites 1T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reflection high-energy electron diffraction phi scans for in situ monitoring the heteroepitaxial growth of Fe on GaN(0001) by molecular beam epitaxy

The heteroepitaxial growth of Fe films on GaN(0001) by molecular beam epitaxy is monitored in situ by reflection high-energy electron diffraction phi scans. The complex epitaxial orientation-relationship between Fe and GaN can be visualized by these phi scans already at an Fe coverage of two monolayers. By comparing the data to ex situ x-ray phi scans, we show that these measurements even allow a quantitative determination of the in-plane orientation-distribution of the heteroepitaxial film. The orientation-distribution is minimized for a growth temperature of 350 deg. C.

36 MATERIALS SCIENCE↗

Investigating the ultraviolet photodissociation of bromocyclopropane with ultrafast electron diffraction

We have studied the photodissociation of gas-phase bromocyclopropane by 200 nm wavelength ultraviolet radiation using ultrafast electron diffraction. Bromocyclopropane is a prototypical molecule in the study of organobromides, a class of molecules that have a significant impact on atmospheric ozone depletion through their photochemistry. Here, previous studies have revealed two possible reaction pathways for the photodissociation of bromine from bromocyclopropane; either the C–Br bond dissociates, leaving behind a cyclopropyl ring, or there is a concerted opening of the cyclopropyl ring along with the C–Br bond dissociation. In this work, both our experimental and simulation results indicate that the majority of the UV-photoexcited BCP molecules (88% ± 11% in the experiment) follow the first reaction pathway, in which the cyclopropyl ring remains closed after homolytic C–Br bond cleavage. This direct bond dissociation occurs within the experimental time resolution of 270 fs. In order to differentiate between the possible reaction end-products, both of which have diffraction signals dominated by the bromine atom, a new analysis method has been employed, which is more sensitive to the structure of the end-products.

Atmospheric chemistry↗

In-situ stoichiometry determination using x-ray fluorescence generated by reflection-high-energy-electron-diffraction

A major challenge in the stoichiometric growth of complex oxide compounds is the control of the relative compositions of the constituent materials. A potential avenue for compositional analysis during growth is the use of x-ray fluorescence generated during reflection high energy electron diffraction measurements. Using this technique, relative compositions of Y and Mn in molecular beam epitaxy grown YMnO{sub 3} samples were studied. Comparing the results with Rutherford back scattering spectroscopy suggests that the technique has the potential for real-time analysis of elemental fluxes and stoichiometry control during sample growth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Real time analysis of self-assembled InAs/GaAs quantum dot growth by probing reflection high-energy electron diffraction chevron image

Self-assembling process of InAs/GaAs quantum dots has been investigated by analyzing reflection high-energy electron diffraction chevron images reflecting the crystal facet structure surrounding the island. The chevron image shows dramatic changes during the island formation. From the temporal evolution of the chevron tail structure, the self-assembling process has been found to consist of four steps. The initial islands do not show distinct facet structures. Then, the island surface is covered by high-index facets, and this is followed by the formation of stable low-index facets. Finally, the flow of In atoms from the islands occurs, which contributes to flatten the wetting layer. Furthermore, we have investigated the island shape evolution during the GaAs capping layer growth by using the same real-time analysis technique.

36 MATERIALS SCIENCE↗

Crystallographic variant mapping using precession electron diffraction data

In this work, we developed three methods to map crystallographic variants of samples at the nanoscale by analyzing precession electron diffraction data using a high-temperature shape memory alloy and a VO2 thin film on sapphire as the model systems. The three methods are (I) a user-selecting-reference pattern approach, (II) an algorithm-selecting-reference-pattern approach, and (III) a k-means approach. In the first two approaches, Euclidean distance, Cosine, and Structural Similarity (SSIM) algorithms were assessed for the diffraction pattern similarity quantification. We demonstrated that the Euclidean distance and SSIM methods outperform the Cosine algorithm. We further revealed that the random noise in the diffraction data can dramatically affect similarity quantification. Denoising processes could improve the crystallographic mapping quality. With the three methods mentioned above, we were able to map the crystallographic variants in different materials systems, thus enabling fast variant number quantification and clear variant distribution visualization. The advantages and disadvantages of each approach are also discussed. We expect these methods to benefit researchers who work on martensitic materials, in which the variant information is critical to understand their properties and functionalities.

Crystallographic variant mapping↗

Nanoscale heat transport from Ge hut, dome, and relaxed clusters on Si(001) measured by ultrafast electron diffraction

The thermal transport properties of crystalline nanostructures on Si were studied by ultra-fast surface sensitive time-resolved electron diffraction. Self-organized growth of epitaxial Ge hut, dome, and relaxed clusters was achieved by in-situ deposition of 8 monolayers of Ge on Si(001) at 550 °C under UHV conditions. The thermal response of the three different cluster types subsequent to impulsive heating by fs laser pulses was determined through the Debye-Waller effect. Time resolved spot profile analysis and life-time mapping was employed to distinguish between the thermal response of the different cluster types. While dome clusters are cooling with a time constant of τ = 150 ps, which agrees well with numerical simulations, the smaller hut clusters with a height of 2.3 nm exhibit a cooling time constant of τ = 50 ps, which is a factor of 1.4 slower than expected.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗