SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Inductively coupled plasma-optical emission spectra were modeled with partial least squares regression models to quantify trace elements in uranium (20–5000 μg per g U) without chemical separations or matrix matched calibration standards.
The quenching of uranyl luminescence by various cation species was studied in aqueous media at low pH. Solutions with different nitrate salts, held at constant uranyl nitrate, nitric acid, and ion concentration, were tested to examine the quenching effects of the cations from the nitrate salts. Alkali metal (Li + , Na + , Rb + ) and quaternary ammonium cations (NH 4 + ), (CH 3 ) 4 N + (TMA + ), (C 2 H 5 ) 4 N + (TEA + ) were investigated. Solutions containing TMA + reduced the lifetime of uranyl fluorescence significantly more than the other cations. Uranyl emission spectra also showed that TMA + increased the complex formation between uranyl and nitrate ions. Fluorescence decay lifetime measurements for most solutions yielded values between 1.4–1.9 μs at 20 °C, while 1.8 M TMA + reduced the lifetime of uranyl fluorescence to 0.6 μs. Decay rate versus concentration data (Stern–Volmer plots) indicated a dynamic quenching process with increasing fluorescence decay rates at higher cation concentrations for Li + , TMA + , and TEA + . The temperature dependencies of the decay rates and the kinetics in D 2 O were also examined.
Replacing classical exciton model with the better founded Multistep Direct (MSD) and Multistep Compound (MSC) mechanisms has been impeded by incapability of the latter models to describe central part of the neutron emission spectra at incident neutron energies of about 14 MeV and above. We have ascribed this deficiency to the decrease of absorption to the MSC mechanism resulting from the concept of gradual absorption. We were able to obtain very good reproduction of experimentally measured neutron spectra using MSD/MSC calculations when this option was turned off. Such treatment is, however, at odds with the fundamental distinction between MSD and MSC mechanisms that should proceed through the chain of open (P-space) and closed (Q-space) configurations respectively. By blocking gradual absorption we allow the first stage of MSC to be fully populated from the incident channel that at higher incident energies is impossible. We discuss various attempts of addressing the problem that, so far, remains open. In addition, we present an evidence for much tighter spin distribution of particle-hole states than normally assumed.
We discuss the neck rupture stage of fission and the emission of particles afterwards, two extremely rapid and highly non-equilibrium processes. Currently, the neck rupture cannot be directly probed by experiment, highlighting the importance of reliable theoretical predictions for this stage of fission. Time-dependent density functional theory (TDDFT) is used to simulate the spontaneous fission of 252 Cf. In conjunction with statistical models, inputs from microscopic calculations can be used to make predictions for prompt neutron and gamma emission spectra, quantities which can be experimentally measured. Here we characterize the scission mechanism within TDDFT and estimate the number of scission neutrons and their kinetic energies.
Single-molecule fluorescence spectroscopy allows direct, real-time observation of dynamic photophysical changes in light harvesting complexes. The Anti-Brownian ELectrokinetic (ABEL) trap is one such single-molecule method with useful advantages. This approach is particularly well-suited to make detailed spectroscopic measurements of pigment-protein complexes in solution phase because it enables extended-duration single-molecule observation by counteracting Brownian motion. This Perspective summarizes recent contributions by the authors and others that have utilized the unique capabilities of the ABEL trap to advance our understanding of phycobiliproteins and the phycobilisome complex, the primary light-harvesting apparatus of cyanobacteria. Monitoring the rich spectroscopic data from these measurements, which include brightness, fluorescence lifetime, polarization, and emission spectra, among other measurable parameters, has provided direct characterization of pigments and energy transfer pathways in the phycobilisome, spanning scales from single pigments and monomeric phycobiliproteins to higher order oligomers and protein-protein interactions of the phycobilisome complex. Importantly, new photophysical states and photodynamics were observed to modulate the flow of energy through the phycobilisome and suggest a previously unknown complexity in phycobilisome light harvesting and energy transport with a possible link to photoadaptive or photoprotective functions in cyanobacteria. Here, beyond deepening our collective understanding of natural light-harvesting systems, these and future discoveries may serve as inspiration for engineering improved artificial light-harvesting technologies.
A Monte Carlo technique has been developed to simulate the expected signal and the statistical noise of x-ray spectrometers that use streak cameras to achieve the time resolution required for ultrafast diagnostics of laser-generated plasmas. The technique accounts for statistics from both the photons incident on the streak camera’s photocathode and the electrons emitted by the photocathode travelling through the camera’s electron optics to the sensor. We use the technique to optimize the design of a spectrometer, which deduces the temporal history of electron temperature of the hotspot in an inertial confinement fusion implosion from its hard x-ray continuum emission spectra. The technique is general enough to be applied to any instrument using an x-ray streak camera.
Motivated by recent advances in the development of single photon emitters for quantum information sciences, here we design and formulate a quantum cascade model that describes cascade emission by a quantum dot (QD) in a cavity structure while preserving entanglement that stores information needed for single photon emission. The theoretical approach is based on a photonic structure that consists of two orthogonal cavities in which resonance with either the first or second of the two emitted photons is possible, leading to amplification and rerouting of the entangled light. The cavity–QD scheme uses a four-level cascade emitter that involves three levels for each polarization, leading to two spatially entangled photons for each polarization. By solving the Schrodinger equation, we identify the characteristic properties of the system, which can be used in conjunction with optimization techniques to achieve the “best” design relative to a set of prioritized criteria or constraints in our optical system. The theoretical investigations include an analysis of emission spectra in addition to the joint spectral density profile, and the results demonstrate the ability of the cavities to act as frequency filters for the photons that make up the entanglements and to modify entanglement properties. The results provide new opportunities for the experimental design and engineering of on-demand single photon sources.
Herein we demonstrate the synthesis of ammonia via atmospheric DBD plasma discharge over silica. We evaluated the performance of three structural different silicas: non-porous silica, fumed-silica and mesoporous SBA-15 silica. The mesoporous SBA-15 sample resulted in an ammonia synthesis rate per gram of catalyst at least 3 times higher than that of the non-porous and fumed silica when employing a hydrogen rich gas feed. The hierarchical ordered pore size in the mesoporous range of SBA-15 allowed us to observe experimentally, the pore size effect in the plasma discharge. Specifically, the ammonia production is enhanced by the presence of mesopores that can effectively enable the discharge diffusion into the pore as predicted by theoretical calculations. The importance of the porous structure was confirmed by optical emission spectra which indicates a similarity on the relative intensity on the main plasma activated species in the gas phase such as N2+, NH and H_α for the three silicas employed in this work i.e., non-porous, fumed and mesoporous (SBA-15). Furthermore, the remarkable ammonia production when employing the SBA-15 shows that despite the similarities in the gas phase the main differences might be attributed to the diffusion of the plasma discharge into the pores.
This paper presents a proposed revision of the International Atomic Energy Agency transport regulations, related to the A 1 and A 2 limit values used to determine the radioactive transport classification. Based on the 'Q system', a novel methodology was introduced to derive Q A and Q B values related to scenarios involving external exposure from a distant source. These values are key parameters that respectively represent the total effective dose and total equivalent dose to the skin, from all primary and secondary particles contributing to radiation exposure. The International Working Group (WG A 1 /A 2 ) is established and associated with the TRANSSC Technical Expert Group on Radiation Protection. A review of the A 1 and A 2 values is performed in response to identified limitations within the existing Q system. The followed approach is based on Monte Carlo simulations that enabled the development of transfer functions aimed at reducing computational time and increasing the flexibility of dose evaluations for any radionuclide with known particle emission spectra. This method allows updating the Q A and Q B values to account for future data evolutions (decay data, fluence-to-dose conversion coefficients) and standardizing the calculation of regulation limits across all referenced radionuclides and scenarios related to external exposure. The transfer functions are established using three Monte Carlo simulation codes—FLUKA, Geant4, and MCNP—and address the previous limitations of the 'Q system', reflecting the latest International Commission for Radiation Protection recommendations and improvements in calculation techniques. The results of the WG show consistent agreement across the codes, with minor discrepancies observed at low primary energies due to statistical uncertainties and different handling of stopping power for electrons/positrons in the codes. This revised approach aligns with current standards and recommendations, ensuring that the radiological consequences of transport accidents are acceptable for the new A 1 and A 2 limits from a radiological protection perspective.
Abstract Machine learning (ML) and artificial intelligence have proven to be an invaluable tool in tackling a vast array of scientific, engineering, and societal problems. The main drivers behind the recent proliferation of ML in practically all aspects of science and technology can be attributed to: (a) improved data acquisition and inexpensive data storage; (b) exponential growth in computing power; and (c) availability of open-source software and resources that have made the use of state-of-the-art ML algorithms widely accessible. The impact of ML on the field of low-temperature plasmas (LTPs) could be particularly significant in the emerging applications that involve plasma treatment of complex interfaces in areas ranging from the manufacture of microelectronics and processing of quantum materials, to the LTP-driven electrification of the chemical industry, and to medicine and biotechnology. This is primarily due to the complex and poorly-understood nature of the plasma-surface interactions in these applications that pose unique challenges to the modeling, diagnostics, and predictive control of LTPs. As the use of ML is becoming more prevalent, it is increasingly paramount for the LTP community to be able to critically analyze and assess the concepts and techniques behind data-driven approaches. To this end, the goal of this paper is to provide a tutorial overview of some of the widely-used ML methods that can be useful, amongst others, for discovering and correlating patterns in the data that may be otherwise impractical to decipher by human intuition alone, for learning multivariable nonlinear data-driven prediction models that are capable of describing the complex behavior of plasma interacting with interfaces, and for guiding the design of experiments to explore the parameter space of plasma-assisted processes in a systematic and resource-efficient manner. We illustrate the utility of various supervised, unsupervised and active learning methods using LTP datasets consisting of commonly-available, information-rich measurements (e.g. optical emission spectra, current–voltage characteristics, scanning electron microscope images, infrared surface temperature measurements, Fourier transform infrared spectra). All the ML demonstrations presented in this paper are carried out using open-source software; the datasets and codes are made publicly available. The FAIR guiding principles for scientific data management and stewardship can accelerate the adoption and development of ML in the LTP community.
Here, this study investigates the scintillation properties of polycrystalline diamond for particle detection applications, particularly in neutron and alpha radiation environments. Polycrystalline diamonds provide a cost-effective alternative to monocrystalline diamonds while retaining essential detection properties. Photoluminescence measurements were performed to analyze emission spectra, revealing distinct characteristics based on impurity content and crystallinity. Scintillation responses were assessed using Silicon Photomultipliers (SiPMs), demonstrating the capability of polycrystalline diamond powders to respond to alpha irradiation, albeit with reduced resolution compared to traditional scintillators. A prototype neutron detector was developed by combining diamond powder with neutron-sensitive 6 LiF, and its performance was evaluated through experimental testing and Geant4 simulations. The findings indicate that polycrystalline diamond-based detectors can achieve significant detection efficiency while remaining insensitive to gamma radiation, offering potential for portable neutron detection applications.
The Deep Underground Neutrino Experiment (DUNE) Phase-II Far Detector is considering an approximately 2000 m 2 photon detection system to achieve a target mean light yield of 180 PE/MeV. Meeting this requirement demands scalable, cost-effective, and high-quality wavelength-shifter (WLS) coatings capable of converting 127 nm liquid-argon scintillation light into visible photons with controlled and reproducible optical performance. We report on the successful realization of an industrial physical vapor deposition (PVD) process forp-terphenyl (pTP) coatings, adapted from vacuum deposition techniques developed for OLED display manufacturing, to produce uniform WLS layers on large-area inorganic substrates, a task traditionally challenged by adhesion and uniformity issues at organic-inorganic interfaces. Surface characterization by profilometry and spectroscopic measurements demonstrates edge-region thickness variation below 10% and emission spectra consistent with high-quality pTP reference samples. The industrial process demonstrates reproducibility, scalability, and significantly reduced production time compared to laboratory-based methods, while maintaining optical characteristics consistent with established pTP reference samples. These results establish a viable pathway for mass production of high-performance pTP coatings for DUNE FD3 and future neutrino experiments, from a coating manufacturing and process standpoint. Detector-level performance validation, including quantitative VUV conversion efficiency measurements at 127 nm, is identified as future work.
ABSTRACT Cyanoacetylene molecules are widespread in the interstellar medium (ISM) and several of its isomers have been detected in cold molecular clouds and circumstellar gas. Accurate estimates of the abundance ratio of cyanoacetylene isomers may provide deep insight into their environment. Such knowledge requires rigorous modelling of the emission spectra based on non-local thermodynamic equilibrium (LTE) radiative transfer calculations. To this end, we computed excitation cross-sections of HC2NC and HNC3 induced by collision with para- and ortho-H2, using a quantum mechanical close-coupling method. Then, by thermally averaging these data, we derived rate coefficients for the first 31 low-lying rotational levels of each isomer for temperatures up to 80 K. For the para-H2 collider, the propensity rules are in favour of rotational transitions involving Δj1 = 2 for both isomers, while for the ortho-H2 collider, Δj1 = 2 and Δj1 = 1 rotational transitions are favoured for HC2NC and HNC3, respectively. A comparison of rate coefficients for the HC3N isomers shows differences up to an order of magnitude, especially at low temperatures. Finally, we performed non-LTE radiative transfer calculations to assess the impact of such variations in the analysis of observations. Our simulation suggests that the lack of collisional data specific to each isomer could lead to errors up to a factor of 2–3 in the excitation temperatures. We expect that these data could help in better understanding the cyanoacetylene chemistry and constraining the nitrogen chemistry in the ISM.
Double-core-hole (DCH) states in isolated-water and heavy-water molecules, resulting from the sequential absorption of two x-ray photons, have been investigated. Here, a comparison of the subsequent Auger emission spectra from the two isotopes provides direct evidence of ultrafast nuclear motion during the 1.5-fs lifetime of these DCH states. Our numerical results align well with the experimental data, providing for various DCH states an in-depth study of the dynamics responsible of the observed isotope effect.
Here, we study theoretically interaction of short optical pulses with triangular graphene quantum dots. If such quantum dots have zigzag edges then there are in-gap degenerate edge states, the number of which depends on the size of the system. We show that the nonlinear optical response, such as high harmonic generation, of triangular quantum dots is sensitive to the initial electron population of their edge states. In general, the emission spectra of quantum dots have weak dependence on the number of occupied edge states, but if half of the edge states are initially occupied, which can be realized only in the quantum dots with even number of edge states, then the even high harmonics are strongly suppressed. The suppression is the strongest when the frequency of the pulse is well below the band gap and it is weak when the pulse frequency becomes comparable to the band gap of the system.
Improved neutron inelastic scattering cross sections have repeatedly been identified as a top priority nuclear data need, important for basic science and a range of applications in nuclear energy, stockpile stewardship, and proliferation detection. For the C 12 ( n , n ′ γ ) reaction in particular, recent measurements have unveiled some structural discrepancies, demonstrating incongruities among themselves and in relation to the ENDF/B-VIII.0 nuclear data evaluation. To help resolve these disagreements, a measurement was performed at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory using a broad-spectrum neutron beam and a 99.8% pure natural carbon target. The Gamma Energy Neutron Energy Spectrometer for Inelastic Scattering (GENESIS) was employed to measure energy-differential γ -ray emission spectra as a function of incident neutron energy in the energy range of 5.5 to 16.7 MeV. The C 12 partial γ -ray cross sections were extracted at 63 ∘ , 122 . 5 ∘ , and 150 ∘ with respect to the incoming neutron beam and integrated using angular distribution data available in the literature. The data show agreement with a recent literature measurement and evaluation from 11 to 15 MeV, but indicate a larger cross section for incident neutron energies between 5.5 and 8.5 MeV. The measured relative angular distributions are also reported and were found to agree with evaluation. Published by the American Physical Society 2025
A realistic and detailed description of neutrinos in binary neutron star (BNS) mergers is essential to build reliable models of such systems. To this end, we present bns_nurates, a novel open-source numerical library designed for the efficient on-the-fly computation of neutrino interactions, with particular focus on regimes relevant to BNS mergers. bns_nurates targets a higher level of accuracy and realism in the implementation of commonly employed reactions by accounting for relevant microphysics effects on the interactions, such as weak magnetism and mean field effects. It also includes the contributions of inelastic neutrino scattering off electrons and positrons and (inverse) nucleon decays. Finally, it offers a way to reconstruct the neutrino distribution function in the framework of moment-based transport schemes. As a first application, we compute both energy-dependent and energy-integrated neutrino emissivities and opacities for conditions extracted from a BNS merger simulation with m1 transport scheme. We find some qualitative differences in the results when considering the impact of the additional relevant reactions and of microphysics effects. For example, neutrino-electron/positron scattering reactions are important for the energy exchange of heavy-type neutrinos as they do not undergo semileptonic charged-current processes, when μ± are not accounted for. Moreover, weak magnetism and mean field effects can significantly modify the contribution of β processes for electron-type (anti)neutrinos, increasing at the same time the importance of (inverse) neutron decays. Here, the improved treatment for the reaction rates also modifies the conditions at which neutrinos decouple from matter in the system, potentially affecting their emission spectra.
In this study, while ultra-thin layers of the LaNiO 3 film exhibit a remarkable metal-insulator transition as the film thickness becomes smaller than a few unit cell (u.c.), the formation of possible oxygen vacancies and their effects on the correlated electronic structure have been rarely studied using first principles. Here, we investigate the effects of the surface termination and the oxygen vacancy position on the electronic properties and vacancy energetics of LaNiO 3 ultra-thin films under the compressive strain using density functional theory plus U (DFT + U). We find that oxygen vacancies can be easily formed in the Ni layers with the NiO 2 terminated surface (0.5 u.c. and 1.5 u.c. thickness) compared to the structures with the LaO terminated surface and the in-plane vacancy is energetically favored than the out-of-plane vacancy. When two vacancy sites are allowed, the Ni square plane geometry is energetically more stable in most cases as two oxygen vacancies tend to stay near a Ni ion. Strong anisotropy between the in-plane and out-of-plane vacancy formation as well as the layer and orbital dependent electronic structure occur due to strain, surface termination, charge reconstruction, and quantum confinement effects. The in-plane vacancy of the NiO 2 terminated structure is favored since the released charge due to the oxygen vacancy can be easily accommodated in the d x 2 -y 2 orbital, which is less occupied than the d z 2 orbital. Remarkably, the oxygen vacancy structure containing the Ni square-plane geometry becomes an insulating state in DFT + U with a sizable band gap of 1.2 eV because the large crystal field splitting between d z 2 and d x 2 -y 2 orbitals in the square-plane favors an insulating state and the Mott insulating state is induced in other Ni sites due to strong electronic correlations. In the thin-film structure without oxygen vacancies, the strong correlation effect in DFT + U drives a pseudogap ground state at the Fermi energy, similarly as the experimental photo-emission spectra; however, the variation of the DFT + U electronic structure depending on the surface termination becomes weaker compared to those obtained in DFT.