SEARCH · Engineering Papers
Results for “ELECTRODE”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Production of gold nanoparticles by electrode-respiring Geobacter sulfurreducens biofilms
Not Available
Water-Based Electrode Manufacturing and Direct Recycling of Lithium-Ion Battery Electrodes—A Green and Sustainable Manufacturing System
It is critical to develop a low-cost and environmentally friendly system to manufacture and recycle lithium-ion batteries (LIBs) as the demand on LIBs keeps increasing dramatically. Conventional LIB cathodes are manufactured using N-methyl-2-pyrrolidone as the solvent, which is expensive, highly toxic, flammable, and energy intensive to produce and recover. Ideally, a close-loop industrial supply chain should be built, in which the batteries are manufactured, market harvested, and recycled with minimal external toxic solvent through the whole system. This work demonstrates a green and more sustainable manufacturing method for LIBs where no hazardous organic solvent is used during electrode manufacturing and recycling. The electrodes fabricated via water-based processing demonstrate comparable rate performance and cycle life to the ones from conventional solvent-based processing. Utilization of a water-soluble binder enables recovering the cathode compound from spent electrodes using water, which is successfully regenerated to deliver comparable electrochemical performance to the pristine one.
Electrochemical generation of hexacyanoferrate and hexacyanoruthanate electroactive films at nickel electrode surfaces: A promising synthetic approach for new electrode materials in metal ion batteries and supercapacitors
Prussian blue analogues (PBAs) have been recently investigated as promising electrode materials for battery and supercapacitor applications. While most explorations have focused on PBA nanoparticles, very little attention has been focused on PBA films deposited on a metallic support. In this work, we have examined electrogenerating hexacyanoferrate (HCF) and hexacyanoruthenate (HCR) films on nickel surfaces via cyclic voltammetry. We found that the total material deposited was influenced by the metal cation present in the electrolyte solution and that, on average, the rate of deposition of the surface adsorbed/immobilized species was dependent on the species in solution. In particular, films electrogenerated in the presence of Na + and K + had the highest deposition rates. The cyclic voltammetric profiles exhibited dramatic differences depending on the cation present in the electrolyte solution. In addition, we found that all films were electrochemically irreversible in the presence of Li + and Mg 2+ containing electrolyte solutions. Further, and as a proof of concept, we modified high surface area nickel electrodes with HCF in sodium-based electrolytes, finding that these electrodes could operate reversibly at equivalent C-rates as high as 1667C.
High capacitance of coarse-grained carbide derived carbon electrodes
Abstract not provided
Investigation of Solid Electrolyte Interphase Layer Formation and Electrochemical Reversibility of Magnetite, Fe 3 O 4 , Electrodes: A Combined X-ray Absorption Spectroscopy and X-ray Photoelectron Spectroscopy Study
Magnetite (Fe 3 O 4 ) is a promising electrode material for the next generation of Li-ion batteries with multiple electron transfers per metal center and a theoretical capacity of 924 mAh/g. However, multiple phase conversions during (de)lithiation of Fe 3 O 4 and formation of a surface electrolyte interphase (SEI) contribute to capacity fade. In this study, X-ray Absorption Spectroscopy (XAS), and X-ray Photoelectron Spectroscopy (XPS) were used to determine the surface chemistry, redox chemistry, and the impact on the electrochemical reversibility in the presence and absence of fluoroethylene carbonate (FEC) solvent. With FEC improved capacity retention and enhanced reversibility are observed. In contrast, electrodes cycled with no FEC exhibit decreased reversibility where the active material remains as reduced Fe 0 . XPS results reveal LiF and lower quantities of oxygen containing species, especially carbonates at the electrode surface tested in FEC. The improvement in electrochemical reversibility with FEC is attributed to the formation of a solid electrolyte interphase which forms prior to initiation of the conversion reaction limiting SEI growth on the reduced products, Fe0 and Li 2 O. In contrast, EC-based carbonate electrolyte forms SEI at a potential where formation of Fe0 and Li 2 O has already initiated resulting in SEI formation on Fe 0 nanograins.
Pre-Sodiated Ti3C2Tx MXene Structure and Behavior as Electrode for Sodium-Ion Capacitors
Explore the source record for details and available documents.
Calculation of Electrochemical Reorganization Energies for Redox Molecules at Self-Assembled Monolayer Modified Electrodes
Electrochemical electron transfer reactions play an important role in energy conversion processes with many technological applications. Electrodes modified by self-assembled monolayers (SAMs) are useful because the double layer effects are reduced. An important quantity for calculating the electron transfer rate constant is the reorganization energy, which is associated with changes in solute geometry and solvent configuration. In this Letter, an approach for calculating the electrochemical solvent reorganization energy for a redox molecule attached to or near a SAM modified electrode is presented. This integral equations formalism polarizable continuum model (IEF-PCM) approach accounts for the detailed electronic structure of the molecule, as well as the contributions from the electrode, SAM, and electronic and inertial solvent responses. The calculated total reorganization energies are in good agreement with experimental data for a series of metal complex in aqueous solution. This approach will be useful for calculating electron transfer rate constants for molecular electrocatalysts. This work was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences.
MIL-101(Fe) as a lithium-ion battery electrode material: a relaxation and intercalation mechanism during lithium insertion
The electrochemical performance of a MIL-101(Fe) metal–organic framework (MOF) as a lithium ion battery electrode is reported for the first time. Iron metal centers can be electrochemically activated. The Fe 3+ /Fe 2+ redox couple is electrochemically active, but not reversible over many cycles. A comparison between ex situ and in operando X-ray absorption spectroscopy (XAS) on the Fe K-edge is presented. Our results indicate that the capacity fade is related to a time dependent, irreversible oxidation of Fe 2+ to Fe 3+ . These results are key in proving the importance of in operando XAS measurements. The MOF side reaction with an electrolyte has been computationally modeled. These results provide further insights on the mechanism responsible for the MOF lack of reversibility. Future guidelines for improving the reversibility of MOFs used as electrodes in Li-ion batteries based on the fine-tuning of the electronic structure of the material are proposed.
Lithium vanadium oxide (Li 1.1 V 3 O 8 ) thick porous electrodes with high rate capacity: utilization and evolution upon extended cycling elucidated via operando energy dispersive X-ray diffraction and continuum simulation
The phase distribution of lithiated LVO in thick (~500 μm) porous electrodes (TPEs) designed to facilitate both ion and electron transport was determined using synchrotron-based operando energy dispersive X-ray diffraction (EDXRD). Probing 3 positions in the TPE while cycling at a 1C rate revealed a homogeneous phase transition across the thickness of the electrode at the 1st and 95th cycles. Additionally, continuum modelling indicated uniform lithiation across the TPE in agreement with the EDXRD results and ascribed decreasing accessible active material to be the cause of loss in delivered capacity between the 1st and 95th cycles. The model was supported by the observation of significant particle fracture by SEM consistent with loss of electrical contact. Overall, the combination of operando EDXRD, continuum modeling, and ex situ measurements enabled a deeper understanding of lithium vanadium oxide transport properties under high rate extended cycling within a thick highly porous electrode architecture.
Optimization of nonatitanate electrodes for sodium-ion batteries
Explore the source record for details and available documents.
Charge and force on a conductive sphere between two parallel electrodes: A Stokesian dynamics approach
Explore the source record for details and available documents.
In situ characterization of the formation of a mixed conducting phase on the surface of yttria-stabilized zirconia near Pt electrodes
The electrochemical reactions of solid oxide fuel cells occur in the region where gas-phase species, electrode, and electrolyte coincide. When the electrode is an ionic insulator and the electrolyte is an electronic insulator, this triple phase boundary is assumed to have atomic dimensions. For this study, we use photoemission electron microscopy to show that the reduced surface of the electrolyte yttria-stabilized zirconia (YSZ) has a sharp electronic metal-insulator boundary near Pt negative electrodes. The electronic conductivity of the reduced YSZ allows for oxygen reduction, allowing the reduced YSZ to behave as an extended triple phase boundary. This extended triple phase boundary can be many microns in size, depending on oxygen pressure, temperature, applied voltage, and time.
Fuel Cell Membrane Electrode Assemblies with Ultra-Low Pt Nanofiber Electrodes (Final Report)
H 2 /air fuel cell membrane-electrode-assemblies (MEAs) were fabricated with electrospun particle/polymer nanofiber mat cathodes (0.1 mg Pt /cm 2 or 0.2 mg Pt /cm 2 Pt/C, PtCo/C or PtNi/C) and anodes (0.1 mg/cm 2 Pt/C), where the binder was a mixture of acid-form perfluorosulfonic acid ionomer (e.g., Nafion™) and poly(acrylic acid) (PAA) carrier polymer or sodium-form PFSA with a carrier polymer of either PAA or polyethylene oxide (PEO). For the latter two cases, the water-soluble carrier was removed from the fibers after electrospinning. MEAs with Pt/C anode/cathode catalyst loadings of 0.1 mg Pt /cm2 each, an 1100 EW PFSA binder (Nafion™ dispersion), and a Nafion 211 membrane produced high power at both high and low relative humidity (RH) conditions, e.g., a maximum power density of 919 mW/cm 2 at 100% RH and 832 mW/cm 2 at 40% RH for a test at 80 °C and 200 kPa abs . The high power at low RH was attributed to nm-size pores within the fibers that trap water via capillary condensation thus maintaining a high proton conductivity of the PFSA binder in the cathode and especially the anode while minimizing/eliminating ionic isolation of catalyst particles in low water content, poorly conductive binder. At the same time, micro-porosity between fibers in the cathode allows for fast removal of electrogenerated water, thus minimizing cathode flooding. Nanofiber MEAs with Pt alloy catalyst cathodes also performed well, where a fibrous PtCo/C catalyst cathode at a loading of 0.1 mg/cm 2 produced 20% more power than a conventional powder cathode MEA, e.g., a maximum power density of 1,045 mW/cm 2 vs. 869 mW/cm 2 at 80 °C, 100% RH, and 200 kPa abs , and a PtNi/C fiber cathode MEAs prepared with Na+-form Nafion + PEO generated a maximum power of 820 mW/cm 2 at 40% RH. Fiber electrode MEAs with a neat Nafion binder (prepared from Na+-form Nafion + PEO or PAA) where the cathode Pt loading was ~0.1 mg/cm 2 exhibited a 25% loss in maximum power at 30,000 metal dissolution cycles, as compared to a 12% loss when the cathode binder was H+-form Nafion + PAA. The performance of a fiber mat electrode MEA with Pt/C catalyst (0.2 mg/cm 2 cathode loading and 0.1 mg/cm 2 anode loading) was excellent. At 80 oC and 200 kPa abs , the maximum power density was 1104 mW/cm 2 . The maximum power was independent of feed gas humidity for 40 < RH < 100%. The power loss after a metal dissolution AST (30,000 voltage cycles) was only 13%.
Electrode kinetics of oxygen reduction - A theoretical and experimental analysis of the rotating ring-disc electrode method
In order to calculate most of the rate constants for the intermediate formation of H2O2 in the electroreduction of O2 to H2O, the theoretical treatments of the rotating ring-disc electrode method by Damjanovic et al. (1966, 1967), Bagotskii et al. (1968, 1969), and Wroblowa et al. (1976) are modified. Rotating ring-disc electrode experimental data obtained for O2 reduction in Pt in 0.55 M H2SO4 are used to illustrate the calculations of rate constants according to the above theoretical treatments. A simple reaction model as proposed by the first author is consistent with the experimental data. The results indicate that O2 (97 percent) reduces to H2O in a direct four-electron transfer reaction. The adsorption of O2 is probably the rate-determining step in the potential region more negative than 0.5 V vs. reversible hydrogen electrode.
Nanotube Film Electrode and an Electroactive Device Fabricated with the Nanotube Film Electrode and Methods for Making Same
Disclosed is a single wall carbon nanotube (SWCNT) film electrode (FE), all-organic electroactive device systems fabricated with the SWNT-FE, and methods for making same. The SWCNT can be replaced by other types of nanotubes. The SWCNT film can be obtained by filtering SWCNT solution onto the surface of an anodized alumina membrane. A freestanding flexible SWCNT film can be collected by breaking up this brittle membrane. The conductivity of this SWCNT film can advantageously be higher than 280 S/cm. An electroactive polymer (EAP) actuator layered with the SWNT-FE shows a higher electric field-induced strain than an EAP layered with metal electrodes because the flexible SWNT-FE relieves the restraint of the displacement of the polymeric active layer as compared to the metal electrode. In addition, if thin enough, the SWNT-FE is transparent in the visible light range, thus making it suitable for use in actuators used in optical devices.