Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Structures and Algorithms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Ice-Over-Water Cloud Properties in an Artificial Neural Network Approach

Clouds are a crucial component of the atmospheric energy system, particularly the radiative balance within, above, and below the troposphere. The vertical distribution of cloud mass and phase determines layer heating rates, the loss of radiation to space, and the amount of radiative heating at the surface. Thus, it is important to know how clouds are distributed both vertically and horizontally at all times of day. Satellite remote sensing is the only approach available to monitor clouds day and night around the globe. In this paper several artificial neural network (ANN) algorithms, employing several Aqua MODIS infrared channels, profiles of relative humidity and temperature from GMAO numerical weather analyses, and the retrieved total cloud visible optical depth, are trained to detect multilayer ice-over-water cloud systems and to retrieve some of their properties as identified by a year of 2008 Aqua MODIS data matched with CloudSat and CALIPSO (CC) cloud profiles. The CC lidar and radar profiles provide the vertical structure that serves as output truth for the multilayer algorithm. The neural networks were trained using one year (2008) of cloud top height data from the CC dataset, with correlation around 0.94 (0.95) and MAE as low as 0.82 (0.81) km for nonpolar regions during the day (night). Applying the trained ANN to independent year 2009 MODIS data resulted in a combined ML and single layer hit rate of 86.4% (85.1%) for nonpolar regions during the day (night). Since the ANN is trained using near-nadir MODIS pixels, infrared radiance corrections were developed as a function of view zenith angle from MODIS and applied to off-nadir pixels when processing MODIS swath data. The multilayer amount derived with the ANN is relatively invariant with increasing view zenith angle compared to the multilayer amount without the corrections.

MODIS↗
NASA NTRS1988

Single-Mode Projection Filters for Modal Parameter Identification for Flexible Structures

Single-mode projection filters are developed for eigensystem parameter identification from both analytical results and test data. Explicit formulations of these projection filters are derived using the orthogonal matrices of the controllability and observability matrices in the general sense. A global minimum optimization algorithm is applied to update the filter parameters by using the interval analysis method. The updated modal parameters represent the characteristics of the test data. For illustration of this new approach, a numerical simulation for the MAST beam structure is shown by using a one-dimensional global optimization algorithm to identify modal frequencies and damping. Another numerical simulation of a ten-mode structure is also presented by using a two-dimensional global optimization algorithm to illustrate the feasibility of the new method. The projection filters are practical for parallel processing implementation.

Huang, Jen-Kuang↗
NASA NTRS1989

Single-mode projection filters for modal parameter identification for flexible structures

Single-mode projection filters are developed for eigensystem parameter identification from both analytical results and test data. Explicit formulations of these projection filters are derived using the orthogonal matrices of the controllability and observability matrices in the general sense. A global minimum optimization algorithm is applied to update the filter parameters by using the interval analysis method. The updated modal parameters represent the characteristics of the test data. For illustration of this new approach, a numerical simulation for the MAST beam structure is shown by using a one-dimensional global optimization algorithm to identify modal frequencies and damping. The projection filters are practical for parallel processing implementation.

Huang, Jen-Kuang↗
NASA NTRS2006

Aeroelastic Flight Data Analysis with the Hilbert-Huang Algorithm

This report investigates the utility of the Hilbert Huang transform for the analysis of aeroelastic flight data. It is well known that the classical Hilbert transform can be used for time-frequency analysis of functions or signals. Unfortunately, the Hilbert transform can only be effectively applied to an extremely small class of signals, namely those that are characterized by a single frequency component at any instant in time. The recently-developed Hilbert Huang algorithm addresses the limitations of the classical Hilbert transform through a process known as empirical mode decomposition. Using this approach, the data is filtered into a series of intrinsic mode functions, each of which admits a well-behaved Hilbert transform. In this manner, the Hilbert Huang algorithm affords time-frequency analysis of a large class of signals. This powerful tool has been applied in the analysis of scientific data, structural system identification, mechanical system fault detection, and even image processing. The purpose of this report is to demonstrate the potential applications of the Hilbert Huang algorithm for the analysis of aeroelastic systems, with improvements such as localized online processing. Applications for correlations between system input and output, and amongst output sensors, are discussed to characterize the time-varying amplitude and frequency correlations present in the various components of multiple data channels. Online stability analyses and modal identification are also presented. Examples are given using aeroelastic test data from the F-18 Active Aeroelastic Wing airplane, an Aerostructures Test Wing, and pitch plunge simulation.

Brenner, Martin J.↗
NASA NTRS2005

Aeroelastic Flight Data Analysis with the Hilbert-Huang Algorithm

This paper investigates the utility of the Hilbert-Huang transform for the analysis of aeroelastic flight data. It is well known that the classical Hilbert transform can be used for time-frequency analysis of functions or signals. Unfortunately, the Hilbert transform can only be effectively applied to an extremely small class of signals, namely those that are characterized by a single frequency component at any instant in time. The recently-developed Hilbert-Huang algorithm addresses the limitations of the classical Hilbert transform through a process known as empirical mode decomposition. Using this approach, the data is filtered into a series of intrinsic mode functions, each of which admits a well-behaved Hilbert transform. In this manner, the Hilbert-Huang algorithm affords time-frequency analysis of a large class of signals. This powerful tool has been applied in the analysis of scientific data, structural system identification, mechanical system fault detection, and even image processing. The purpose of this paper is to demonstrate the potential applications of the Hilbert-Huang algorithm for the analysis of aeroelastic systems, with improvements such as localized/online processing. Applications for correlations between system input and output, and amongst output sensors, are discussed to characterize the time-varying amplitude and frequency correlations present in the various components of multiple data channels. Online stability analyses and modal identification are also presented. Examples are given using aeroelastic test data from the F/A-18 Active Aeroelastic Wing aircraft, an Aerostructures Test Wing, and pitch-plunge simulation.

Brenner, Marty↗
NASA NTRS1996

Use of the Matching Pursuit Algorithm for Flight Flutter Test Data Analysis

The goal of flight flutter testing is to detect possibly destructive modes of aircraft vibration which may arise during flight from interaction of aerodynamic forces with structural dynamic properties of the airframe. This is typically accomplished by exciting the airframe with a time varying force and monitoring the response of the aircraft throughout its flight envelope. The data generated must be analyzed and presented so that the frequency and time of occurrence of excited modes are clearly and unambiguously displayed. Processing and display in near real time is also desirable. Display of data in the time-frequency plane is a natural choice because it is a familiar and intuitive framework. The Matching Pursuit algorithm provides a time-frequency analysis with good adaptability to signal structure and good signal representation in the time-frequency plane. Improvements in efficiency are needed before the algorithm can be used in real time, however.

Nelson, Ronald E.↗
NASA NTRS1985

A Parametric Study of the Ibrahim Time Domain Modal Identification Algorithm

The accuracy of the Ibrahim time Domain (ITD) identification algorithm in extracting structural model parameters from free response functions was studied using computer simulated data for 65 positions on an isotropic, uniform thickness plate with mode shapes obtained by NASTRAN analysis. Natural frequencies were used to study identification results over ranges of modal parameter values and user selectable algorithm constants. Effects of superimposing various levels of noise onto the functions were investigated. No detrimental effects were observed when the number of computational degrees of freedom allowed in the algorithm was made many times larger than the minimum necessary for adequate identification. The use of a high number of degrees of freedom when analyzing experimental data, for the simultaneous identification of many modes in one computer run are suggested.

Pappa, R. S.↗
NASA NTRS1991

Towards operational multisensor registration

To use data from a number of different remote sensors in a synergistic manner, a multidimensional analysis of the data is necessary. However, prior to this analysis, processing to correct for the systematic geometric distortion characteristic of each sensor is required. Furthermore, the registration process must be fully automated to handle a large volume of data and high data rates. A conceptual approach towards an operational multisensor registration algorithm is presented. The performance requirements of the algorithm are first formulated given the spatially, temporally, and spectrally varying factors that influence the image characteristics and the science requirements of various applications. Several registration techniques that fit within the structure of this algorithm are also presented. Their performance was evaluated using a multisensor test data set assembled from LANDSAT TM, SEASAT, SIR-B, Thermal Infrared Multispectral Scanner (TIMS), and SPOT sensors.

Rignot, Eric J. M.↗
NASA NTRS1999

Using a Genetic Algorithm to Model Broadband Regional Waveforms for Crustal Structure in the Western United States

In this study, we analyze regional seismograms to obtain the crustal structure in the eastern Great Basin and western Colorado plateau. Adopting a for- ward-modeling approach, we develop a genetic algorithm (GA) based parameter search technique to constrain the one-dimensional crustal structure in these regions. The data are broadband three-component seismograms recorded at the 1994-95 IRIS PASSCAL Colorado Plateau to Great Basin experiment (CPGB) stations and supplemented by data from U.S. National Seismic Network (USNSN) stations in Utah and Nevada. We use the southwestern Wyoming mine collapse event (M(sub b) = 5.2) that occurred on 3 February 1995 as the seismic source. We model the regional seismograms using a four-layer crustal model with constant layer parameters. Timing of teleseismic receiver functions at CPGB stations are added as an additional constraint in the modeling. GA allows us to efficiently search the model space. A carefully chosen fitness function and a windowing scheme are added to the algorithm to prevent search stagnation. The technique is tested with synthetic data, both with and without random Gaussian noise added to it. Several separate model searches are carried out to estimate the variability of the model parameters. The average Colorado plateau crustal structure is characterized by a 40-km-thick crust with velocity increases at depths of about 10 and 25 km and a fast lower crust while the Great Basin has approximately 35- km-thick crust and a 2.9-km-thick sedimentary layer.

Bhattacharyya, Joydeep↗
NASA NTRS1988

A representational framework and user-interface for an image understanding workstation

Problems in image understanding involve a wide variety of data (e.g., image arrays, edge maps, 3-D shape models) and processes or algorithms (e.g., convolution, feature extraction, rendering). The underlying structure of an Image Understanding Workstation designed to support mulitple levels and types of representations for both data and processes is described, also the user-interface. The Image Understanding Workstation consists of two parts: the Image Understanding (IU) Framework, and the user-interface. The IU Framework is the set of data and process representations. It includes multiple levels of representation for data such as images (2-D), sketches (2-D), surfaces (2 1/2 D), and models (3-D). The representation scheme for processes characterizes their inputs, outputs, and parameters. Data and processes may reside on different classes of machines. The user-interface to the IU Workstation gives the user convenient access for creating, manipulating, transforming, and displaying image data. The user-interface follows the structure of the IU Framework and gives the user control over multiple types of data and processes. Both the IU Framework and user-interface are implemented on a LISP machine.

Schroeder, Joyce D.↗
NASA NTRS1982

Yet another method for triangulation and contouring for automated cartography

An algorithm is presented for hierarchical subdivision of a set of three-dimensional surface observations. The data structure used for obtaining the desired triangulation is also singularly appropriate for extracting contours. Some examples are presented, and the results obtained are compared with those given by Delaunay triangulation. The data points selected by the algorithm provide a better approximation to the desired surface than do randomly selected points.

De Floriani, L.↗
NASA NTRS1999

Systems Engineering Design Via Experimental Operation Research: Complex Organizational Metric for Programmatic Risk Environments (COMPRE)

Unique and innovative graph theory, neural network, organizational modeling, and genetic algorithms are applied to the design and evolution of programmatic and organizational architectures. Graph theory representations of programs and organizations increase modeling capabilities and flexibility, while illuminating preferable programmatic/organizational design features. Treating programs and organizations as neural networks results in better system synthesis, and more robust data modeling. Organizational modeling using covariance structures enhances the determination of organizational risk factors. Genetic algorithms improve programmatic evolution characteristics, while shedding light on rulebase requirements for achieving specified technological readiness levels, given budget and schedule resources. This program of research improves the robustness and verifiability of systems synthesis tools, including the Complex Organizational Metric for Programmatic Risk Environments (COMPRE).

Mog, Robert A.↗
NASA NTRS1986

Transverse vorticity measurements using an array of four hot-wire probes

A comprehensive description of the technique used to obtain a time series of the quasi-instantaneous transverse vorticity from a four wire array of probes is presented. The algorithmic structure which supports the technique is described in detail and demonstration data, from a large plane shear layer, are presented to provide a specific utilization of the technique. Sensitivity calculations are provided which allow one contribution to the inherent uncertainty of the technique to be evaluated.

Foss, J. F.↗
NASA NTRS1989

Querying databases of trajectories of differential equations: Data structures for trajectories

One approach to qualitative reasoning about dynamical systems is to extract qualitative information by searching or making queries on databases containing very large numbers of trajectories. The efficiency of such queries depends crucially upon finding an appropriate data structure for trajectories of dynamical systems. Suppose that a large number of parameterized trajectories gamma of a dynamical system evolving in R sup N are stored in a database. Let Eta is contained in set R sup N denote a parameterized path in Euclidean Space, and let the Euclidean Norm denote a norm on the space of paths. A data structure is defined to represent trajectories of dynamical systems, and an algorithm is sketched which answers queries.

Grossman, Robert↗
NASA NTRS1997

Geopotential Error Analysis from Satellite Gradiometer and Global Positioning System Observables on Parallel Architecture

The recovery of a high resolution geopotential from satellite gradiometer observations motivates the examination of high performance computational techniques. The primary subject matter addresses specifically the use of satellite gradiometer and GPS observations to form and invert the normal matrix associated with a large degree and order geopotential solution. Memory resident and out-of-core parallel linear algebra techniques along with data parallel batch algorithms form the foundation of the least squares application structure. A secondary topic includes the adoption of object oriented programming techniques to enhance modularity and reusability of code. Applications implementing the parallel and object oriented methods successfully calculate the degree variance for a degree and order 110 geopotential solution on 32 processors of the Cray T3E. The memory resident gradiometer application exhibits an overall application performance of 5.4 Gflops, and the out-of-core linear solver exhibits an overall performance of 2.4 Gflops. The combination solution derived from a sun synchronous gradiometer orbit produce average geoid height variances of 17 millimeters.

Schutz, Bob E.↗
NASA NTRS2012

Nonlinear Aerodynamic Modeling From Flight Data Using Advanced Piloted Maneuvers and Fuzzy Logic

Results of the Aeronautics Research Mission Directorate Seedling Project Phase I research project entitled "Nonlinear Aerodynamics Modeling using Fuzzy Logic" are presented. Efficient and rapid flight test capabilities were developed for estimating highly nonlinear models of airplane aerodynamics over a large flight envelope. Results showed that the flight maneuvers developed, used in conjunction with the fuzzy-logic system identification algorithms, produced very good model fits of the data, with no model structure inputs required, for flight conditions ranging from cruise to departure and spin conditions.

Brandon, Jay M.↗
NASA NTRS1992

A numerical approach to controller design with an application to a space structure test facility

An iterative numerical algorithm that improves feasible closed loop design criteria by updating the parameters of a linear controller is developed. The algorithm allows the use of experimentally derived data collected from the open loop plant. It eliminates the need for an accurate parametric model of the open loop system. Experimental results from the application of a controller designed for a large space structure ground test facility using the algorithm are presented.

Frazier, W. G.↗
NASA NTRS1988

Application of acoustic-Doppler current profiler and expendable bathythermograph measurements to the study of the velocity structure and transport of the Gulf Stream

The degree to which Acoustic-Doppler Current Profiler (ADCP) and expendable bathythermograph (XBT) data can provide quantitative measurements of the velocity structure and transport of the Gulf Stream is addressed. An algorithm is used to generate salinity from temperature and depth using an historical Temperature/Salinity relation for the NW Atlantic. Results have been simulated using CTD data and comparing real and pseudo salinity files. Errors are typically less than 2 dynamic cm for the upper 800 m out of a total signal of 80 cm (across the Gulf Stream). When combined with ADCP data for a near-surface reference velocity, transport errors in isopycnal layers are less than about 1 Sv (10 to the 6th power cu m/s), as is the difference in total transport for the upper 800 m between real and pseudo data. The method is capable of measuring the real variability of the Gulf Stream, and when combined with altimeter data, can provide estimates of the geoid slope with oceanic errors of a few parts in 10 to the 8th power over horizontal scales of 500 km.

Joyce, T. M.↗