SEARCH · Engineering Papers

Results for “DISCHARGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2017

Pressure effect on a tandem hollow cathode discharge in argon

The tandem hollow cathode discharge, formulated by arranging two discharges in series, is an important method used to increase the irradiance of a hollow cathode discharge. Here in this paper, based on a two-dimensional fluid model we studied a five-layer tandem hollow cathode discharge, with three hollow electrodes stacked together and separated by the insulators to obtain the configuration of anode/insulator/cathode/insulator/anode from the top to the bottom. In the model, the thickness of both electrodes and insulators is set at 1 cm and the diameter of the hollow cavity is 2 cm. The pressure effect on the discharge properties is investigated with gas pressure ranges from 100 Pa to 5 kPa. The gap voltage first decreases, reaching a minimum sustaining voltage at 1 kPa, and then increases. Based on the two-dimensional electron density distributions, the discharges parameters (including the electron density, ion density, electric potential, and electric field) of one integrated hollow cathode discharge at 1 kPa and two relatively independent discharges at 100 Pa and 4 kPa are presented, respectively. Lastly, the results indicate that the paralleled hollow cathode discharges can be manipulated into one integrated discharge with a higher plasma density by the monotonous control of gas pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2013

Characterization Of Microwave Discharge Plasmas For Surface Processing

We have developed several diagnostic techniques to characterize two types of microwave (MW) discharge plasmas: a supersonic flowing argon MW discharge maintained in a cylindrical quartz cavity at frequency / = 2.45 GHz and a pulse repetitive MW discharge in air at f = 9.5 GHz. Low temperature MW discharges have been proven to possess attractive properties for plasma cleaning and etching of niobium surfaces of superconductive radio frequency (SRF) cavities. Plasma based surface modification technologies offer a promising alternative for etching and cleaning of SRF cavities. These technologies are low cost, environmentally friendly and easily controllable, and present a possible alternative to currently used acid based wet technologies, such as buffered chemical polishing (BCP), or electrochemical polishing (EP). In fact, weakly ionized, non-equilibrium, and low temperature gas discharges represent a powerful tool for surface processing due to the strong chemical reactivity of plasma radicals. Therefore, characterizing these discharges by applying non-perturbing, in situ measurement techniques is of vital importance. Optical emission spectroscopy has been employed to analyze the molecular structure and evaluate rotational and vibrational temperatures in these discharges. The internal plasma structure was studied by applying a tomographic numerical method based on the two-dimensional Radon formula. An automated optical measurement system has been developed for reconstruction of local plasma parameters. It was found that excited argon states are concentrated near the tube walls, thus confirming the assumption that the post discharge plasma is dominantly sustained by a travelling surface wave. Employing a laser induced fluorescence technique in combination with the time synchronization device allowed us to obtain time-resolved population densities of some excited atomic levels in argon. We have developed a technique for absolute measurements of electron density based on the time-resolved absolute intensity of a Nitrogen spectral band belonging to the Second Positive System, the kinetic model and the detailed particle balance of the iV2 (C3IIU) state. Measured electron density waveforms are in fair agreement with electron densities obtained using the Stark broadening technique. In addition, time dependent population densities of Ar I metastable and resonant levels were obtained by employing a kinetic model developed based on analysis of population density rates of excited Ar I p levels. Both the experimental results and numerical models for both types of gas discharges indicate that multispecies chemistry of gases plays an important role in understanding the dynamics and characterizing the properties of these discharges.

Nikolic, Milka↗

NASA NTRS1980

Modelling of environmentally induced discharges in geosynchronous satellites

The NASCAP computer code was used to compute the charging and discharging characteristics of a typical communications satellite in geosynchronous orbit. For the case of a severe substorm satellite surface differential charging in sunlight was found to be substantially less than that required to produce discharges in ground simulation studies. A discharge process was postulated involving discharges triggered at edges (or imperfection) followed by discharges to space. The characteristics of such discharges was parametrically varied to evaluate the possible effects on the satellite. Results indicated that discharge characteristics inferred from satellite monitors could be caused by predicted space discharges, that single cell discharges to space can reduce surface potentially over entire satellite, and that low density electron trajectory computations indicate that discharge generated electrons do not return to the satellite by long trajectories. Current transients predicted do not agree with available ground simulation results indicating that additional work must be done both analytically and experimentally to understand and fully explain these discrepancies.

Stevens, N. J.↗

NASA NTRS1980

Modelling of environmentally induced discharges in geosynchronous satellites

The NASCAP computer code is used to compute the charging and discharging characteristics of a typical communications satellite in geosynchronous orbit. For the case of a severe substorm, satellite surface differential charging in sunlight is found to be substantially less than that required to produce discharges in ground simulation studies. A discharge process is postulated involving discharges triggered at edges (or imperfection) followed by discharges to space. The characteristics of such discharges are parametrically varied to evaluate the possible effects on the satellite. It has been found that discharge characteristics inferred from satellite monitors could be caused by predicted space discharges, that single cell discharges to space can reduce surface potential over entire satellite, and that low-density electron trajectory computations indicate that discharge generated electrons may not return to the satellite by long trajectories. Current transients predicted do not agree with the available ground simulation results indicating that additional work must be done both analytically and experimentally to understand and fully explain these discrepancies.

Stevens, N. J.↗

NASA NTRS2023

A Framework for Estimating Global River Discharge From the Surface Water and Ocean Topography Satellite Mission

The Surface Water and Ocean Topography (SWOT) mission will vastly expand measurements of global rivers, providing critical new data sets for both gaged and ungaged basins. SWOT discharge products (available approximately 1 year after launch) will provide discharge for all river that reaches wider than 100 m. In this paper, we describe how SWOT discharge produced and archived by the US and French space agencies will be computed from measurements of river water surface elevation, width, and slope and ancillary data, along with expected discharge accuracy. We present for the first time a complete estimate of the SWOT discharge uncertainty budget, with separate terms for random (standard error) and systematic (bias) uncertainty components in river discharge time series. We expect that discharge uncertainty will be less than 30% for two-thirds of global reaches and will be dominated by bias. Separate river discharge estimates will combine both SWOT and in situ data; these “gage-constrained” discharge estimates can be expected to have lower systematic uncertainty. Temporal variations in river discharge time series will be dominated by random error and are expected to be estimated within 15% for nearly all reaches, allowing accurate inference of event flow dynamics globally, including in ungaged basins. We believe this level of accuracy lays the groundwork for SWOT to enable breakthroughs in global hydrologic science.

Michael Durand↗

DOE OSTI2025

Experimental study of high-energy single-pulse nanosecond discharges in pin-to-pin configuration

Single-pulse pin-to-pin nanosecond pulsed discharges in ambient air (gap distances of 3–7 mm) were investigated at high pulse energies (∼20–30 mJ deposited energy per 11 ns full width at half maximum pulse). A Michelson interferometry setup (532 nm continuous-wave laser) was employed to record time-resolved interferograms of the discharge, enabling spatially resolved calculation of the electron number density. An intensified charge-coupled device camera was used to capture the spatiotemporal evolution of the discharge (streamer formation and spark channel development), and Coherent Anti-Stokes Raman Spectroscopy (CARS) was used to measure post-discharge N 2 vibrational temperatures. Discharge current and voltage were monitored with a back-current shunt. The discharge was initiated with simultaneous cathode-directed and anode-directed streamers that bridge the gap within ∼1 ns and form a luminous, filamentary plasma channel immediately after breakdown. Laser interferometry measurements showed peak electron number densities of the order of 10 1 7–10 18 cm −3 , occurring about 15–20 ns after pulse arrival at the discharge gap. Shorter gap discharges yielded higher peak electron densities, consistent with the higher energy density in the smaller gaps. Spatially, the electron density was highest near the electrodes and decreased toward the midgap region, with 5 and 7 mm gaps exhibiting a pronounced drop in the central channel. CARS indicated initial vibrational temperatures of approximately 4000–6000 K in the spark core of ∼50 ns after the discharge onset, decaying on a ∼500 ns timescale as the plasma cooled and recombined.

Coherent anti-Stokes Raman spectroscopy↗

DOE OSTI2024

Unraveling the Physics Associated with the Production of Extremely Dense Plasma States of Microscale Nanosecond-pulsed Discharges

The research carried out on this grant aimed to study the properties of anomalously dense plasmas formed in so-called ”fast” discharges, such as high pressure narrow-gap nanosecond pulsed discharges and short pulse (nanosecond-scale) laser driven discharges. These fast discharges are receiving much attention as they now enable new applications in aerodynamics, combustion, biology, and medicine. The mechanisms that generate these high electron densities (ne > 10 19 cm −3 ) that encroach on warm dense matter regimes are not well understood. Such densities are orders of magnitude higher than those (≈ 10 15 cm −3 ) routinely seen in classical high-pressures (streamer) discharges. Furthermore, the dense plasmas are reported to be highly nonequilibrium, with T gas <<, T i << T e . These properties would place these discharges in a regime of near full ionization (Z ≥ 1) where there is inadequate electron screening and therefore strong ion coupling - physics that is not generally accounted for in simulations. In this project work, we seek to study these fast discharges, validate simulations with experiments at pressures as high as 10-50 bar, and augment plasma production to even higher levels of n e (> 10 20 cm −3 ) with second-stage picosecond laser heating. In parallel, we have studied the use of these fast discharges in reactive gases, unraveling mechanisms related to the fast discharge dissociation of CO 2 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2015

Comparison of electrical and optical characteristics in gas-phase and gas-liquid phase discharges

This paper presents an AC-excited argon discharge generated using a gas-liquid (two-phase) hybrid plasma reactor, which mainly consists of a powered needle electrode enclosed in a conical quartz tube and grounded deionized water electrode. The discharges in the gas-phase, as well as in the two-phase, exhibit two discharge modes, i.e., the low current glow-like diffuse mode and the high current streamer-like constrict mode, with a mode transition, which exhibits a negative resistance of the discharges. The optical emission spectral analysis shows that the stronger diffusion of the water vapor into the discharge region in the two-phase discharges boosts up the generation of OH (A–X) radicals, and consequently, leads to a higher rotational temperature in the water-phase plasma plume than that of the gas-phase discharges. Both the increase of the power input and the decrease of the argon flow rate result in the increase of the rotational temperature in the plasma plume of the water-phase discharge. The stable two-phase discharges with a long plasma plume in the water-phase under a low power input and gas flow rate may show a promising prospect for the degradation of organic pollutants, e.g., printing and dyeing wastewater, in the field of environmental protection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

Pulsed anodic arc discharge for the synthesis of carbon nanomaterials

Pulsed arc discharges can improve arc control and tailor the ablation process in the production of 1D and 2D nanostructures from carbon anodes. In this work, low-dimensional carbon nanoparticles have been generated by means of anodic arc discharge in helium atmosphere excited with a square-wave modulated signal (1–5 Hz, 10% duty cycle). The discharges were performed between two graphite electrodes with maximal peak current of 250 A and maximal voltage of 65 V. The erosion rates and conversion efficiency of the ablated anode are compared to reference samples grown in DC steady arc mode. Ablation rates in pulsed arcs are typically of the order of 1 mg/s. Combination of fast Langmuir probe diagnostics and optical emission spectroscopy provided plasma parameters of the discharges at the arc column. Ranges of 10 16 –10 17 m -3 for electron density and 0.5–2.0 eV for electron temperature are estimated. The obtained samples were characterized with Raman spectroscopy and scanning electron microscopy. The deposit on the cathode after pulsed arc consisted of carbon nanostructures such as graphene nano-platelets and carbon nanotubes. Erosion dynamics of pulsed arc discharge has been described in terms of a global model and compared to steady arc discharge. A correlation is identified among discharge regimes, optical emission patterns and ablation modes. In conclusion, pulsed anodic arc discharge is a very efficient source of carbon nanomaterials. The large control of the discharge characteristics will permit to tailor accurately the production and the properties of carbon nanotubes and graphene. Here, this deposition method is promising for the fabrication of semiconducting nanomaterials with tuneable electrical and optical properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

QA/QC of the East River, Colorado, discharge and geochemical time series datasets (Almont, BCC, and Pump House) to be used for modeling of hydrogeochemical balance

The following datasets were QA/QC-ed (Quality Assurance/Quality Control): 1. Brush Creek Confluence (BCC) discharge data (from Helen Malenda, USGS, Colorado School of Mines), which were calculated using the pressure transducer data and rating curves. The original 15 min time series data were presented as mean daily discharge. 2. Almont discharge data from United States Geological Survey (USGS). The original data were in 15 min time intervals, and were averaged to mean daily discharge time series. 3. Pump House discharge data as mean daily discharge (downloaded from the SFA portal). 4. BCC and Pump House chemistry data from SFA data portal and/or original spreadsheets provided by Roelof Versteeg. The following challenging QA/QC problems of the datasets were resolved: Missing data with the duration of gaps up to >1 month; Duplicated dates; Anomalies and outliers of discharge and concentrations; Time stamps of measurements of the discharge and concentrations are not aligned (hydrogeochemical balance calculations require the timestamps to be aligned). All QA/QC-ed datasets are given as csv files. The csv files were prepared using the xts files with multiple worksheets, which are also included in the data packages. Figures of the QA/QC-ed datasets are given in the jpeg and pdf formats. The QA/QC-ed datasets have been used to quantify discharge and chemical concentrations in river water in order to understand riverine exports of water and dissolved constituents in the East River watershed. These datasets served as a basis in the presentation given by P. Fox et al. at the 2021 Goldschmidt Conference.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

Assessing Documentation of Critical Imaging Result Follow-up Recommendations in Emergency Department Discharge Instructions

To facilitate follow-up of critical test results across transitions in patient care settings, we implemented an electronic discharge module that enabled care providers to include follow-up recommendations in the discharge instructions. We assessed the impact of this module on documentation of follow-up recommendations for critical imaging findings in Emergency Department (ED) discharge instructions. We studied 240 patients with critical imaging findings discharged from the ED before (n = 80) and after (n = 160) implementation of the module. We manually reviewed hand-written forms and electronic discharge instructions to determine if follow-up recommendations were documented. Follow-up recommendations in ED discharge instructions increased from 60.0% (48/80) to 73.8% (118/160) post-module implementation (p = 0.03), a relative increase of 23%. There was no significant change in the rate of documented critical imaging findings in the discharge instructions (77.5% [62/80] before the intervention and 76.9% [123/160] after the intervention; p = 0.91). Implementation of a discharge module was associated with increased documentation of critical imaging finding follow-up recommendations in ED discharge instructions. However, one in four patients still did not receive adequate follow-up recommendations, suggesting further opportunities for performance improvement exist.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

DOE OSTI2016

A comparative study on the frequency effects of the electrical characteristics of the pulsed dielectric barrier discharge in He/O{sub 2} and in Ar/O{sub 2} at atmospheric pressure

In this work, a comparative study on the frequency effects of the electrical characteristics of the pulsed dielectric barrier discharges in He/O{sub 2} and in Ar/O{sub 2} at atmospheric pressure has been performed by means of the numerical simulation based on a 1-D fluid model at frequencies below 100 kHz. The frequency dependences of the characteristic quantities of the discharges in the two gases have been systematically calculated and analyzed under the oxygen concentrations below 2%. The characteristic quantities include the discharge current density, the averaged electron density, the electric field, and the averaged electron temperature. Especially, the frequency effects on the averaged particle densities of the reactive species have also been calculated. This work gives the following significant results. For the two gases, there are two bipolar discharges in one period of applied voltage pulse under the considered frequency range and oxygen concentrations, as occurred in the pure noble gases. The frequency affects the two discharges in He/O{sub 2}, but in Ar/O{sub 2}, it induces a strong effect only on the first discharge. For the first discharge in each gas, there is a characteristic frequency at which the characteristic quantities reach their respective minimum, and this frequency appears earlier for Ar/O{sub 2}. For the second discharge in Ar/O{sub 2}, the averaged electron density presents a slight variation with the frequency. In addition, the discharge in Ar/O{sub 2} is strong and the averaged electron temperature is low, compared to those in He/O{sub 2.} The total averaged particle density of the reactive species in Ar/O{sub 2} is larger than those in He/O{sub 2} by about one order of magnitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2016

Experimental investigation on the effect of plasma jet in the triggered discharge process of a gas switch

The temporal and spatial evolution of a plasma jet generated by a spark discharge was observed. The electron temperature and density were obtained under different time and gas pressures by optical emission spectroscopy. Moreover, the discharge process of the plasma-jet triggered gas switch was recorded and analyzed at the lowest working coefficient. The results showed that the plasma jet moved forward in a bullet mode, and the advancing velocity increased with the decrease of pressure, and decreased with time growing. At initial time, the maximum velocity of a plasma jet could reach 3.68 × 10{sup 6 }cm/s. The electron temperature decreased from 2.0 eV to 1.3 eV, and the electron density increased from 3.1 × 10{sup 15}/cm{sup 3} to 6.3 × 10{sup 15}/cm{sup 3} at the initial moment as the gas pressure increases from 0.1 MPa to 0.32 MPa. For a two-gap gas switch, the discharge performances were more depended on the second discharge spark gap (gap 2). Because plasma jet promoted the discharge in Gap 2, the gas switch operating in mode II had better triggered discharge characteristics. In the discharge process, the plasma-jet triggering had the effect of non-penetrating inducing, which not only provided initial electrons for reducing statistical lag but also enhanced the local electric field. The discharge was initiated and accelerated from electron avalanche to streamer. Therefore, a fast discharge was occurred in the gas switch.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1991

An analysis of the frequency characteristics of corona discharge at low pressure

Corona discharge is becoming more of a concern now that the space program is looking at higher power and voltage requirements for future missions. Improved detection methods for studying corona discharge will increase the knowledge base of how this phenomenon occurs, what effects it has on power systems, and how it is affected by outside influences. A better understanding of corona discharge will enable designers to improve on the space applications of insulation and dielectrics, and develop proper detection techniques. A test system was designed and constructed to measure the frequency spectrum of corona discharge current in low pressure. Various test samples in different arrangements were energized by ac voltage until corona discharge occurred. This same test was repeated at different pressures. The results indicate that the frequency spectrum of the discharge current changes with a change in pressure. At low pressures, the discharge frequency spectrum is concentrated in a narrow band with a peak at 17 kHz. As the pressure is increased, the spectral width increases to include components across a much broader band. Other tests were performed to correlate the frequency spectrum data to the shape of the discharge pulse and the physical appearance of the glow discharge.

T Gregory Lewis↗

NASA NTRS1938

Discharge characteristics of a simulated unit injection system

Rate-of-discharge curves that show the discharge characteristics of an injection system having a very short fuel passage are presented. The rate of discharge closely follows the rate of displacement of the injection-pump plunger for open nozzles in which the maximum calculated pressures at the orifice do not exceed a certain value, which is dependent on the particular injection pump. With small orifices and high pump speeds, the rate of discharge does not follow the rate of plunger displacement because the higher discharge pressure results in increased leakage with corresponding decrease in discharge rate. The rate of discharge is not directly related to the rate of plunger displacement with automatic injection valves having closed nozzles. The types of pump check valve tested did not control the rate of cut-off or the discharge rate but they did affect the injection lag. Use of the short fuel passage eliminated the formation of secondary discharges.

Marsh, Edred T↗

NASA NTRS2004

Discharge Chamber Primary Electron Modeling Activities in Three-Dimensions

Designing discharge chambers for ion thrusters involves many geometric configuration decisions. Various decisions will impact discharge chamber performance with respect to propellant utilization efficiency, ion production costs, and grid lifetime. These hardware design decisions can benefit from the assistance of computational modeling. Computational modeling for discharge chambers has been limited to two-dimensional codes that leveraged symmetry for interpretation into three-dimensional analysis. This paper presents model development activities towards a three-dimensional discharge chamber simulation to aid discharge chamber design decisions. Specifically, of the many geometric configuration decisions toward attainment of a worthy discharge chamber, this paper focuses on addressing magnetic circuit considerations with a three-dimensional discharge chamber simulation as a tool. With this tool, candidate discharge chamber magnetic circuit designs can be analyzed computationally to gain insight into factors that may influence discharge chamber performance such as: primary electron loss width in magnetic cusps, cathode tip position with respect to the low magnetic field volume, definition of a low magnetic field region, and maintenance of a low magnetic field region across the grid span. Corroborating experimental data will be obtained from mockup hardware tests. Initially, simulated candidate magnetic circuit designs will resemble previous successful thruster designs. To provide opportunity to improve beyond previous performance benchmarks, off-design modifications will be simulated and experimentally tested.

Steuber, Thomas J.↗

DOE OSTI2017

Monitoring nanoparticle synthesis in a carbon arc discharge environment, in situ

This work presents experimental and theoretical studies of gas-phase synthesis of fullerenes and carbon nanoparticles in the presence of an atmospheric-pressure, arc discharge plasma. Carbon arc discharges have been used for synthesizing carbon nanotubes for over 25 years, and have the potential for economically synthesizing industrial-scale quantities of fullerenes. However, the efficiency and selectivity of fullerene synthesis with carbon arc discharges are quite low. Optimizing carbon arc discharges for fullerene synthesis requires a thorough understanding of the dynamics behind gas-phase nanoparticle synthesis in the presence of an arc discharge plasma. We built a carbon arc discharge setup to study nanoparticle and fullerene synthesis. The laser-induced incandescence (LII) diagnostic was applied for monitoring nanoparticle synthesis, in situ. The LII diagnostic had previously been applied as a combustion diagnostic for in situ measurements of concentrations and sizes of soot particles in flame environments. Prior to the present study, it had never been applied for studying fullerenes, nor had it been applied to study nanoparticles in the presence of an atmospheric-pressure plasma. Therefore, experiments were designed that allowed for the calibration of the LII diagnostic with research-grade, arc-synthesized soot particles and carbon nanotubes. Additionally, the theory and models underpinning the LII diagnostic were adapted to include the presence of an atmospheric-pressure, arc-discharge plasma. Results presented in this work confirm the ability of the LII diagnostic to measure sizes of arc-synthesized nanoparticles in situ, and show the spatial location of high densities of arc-synthesized nanoparticles with respect to the arc discharge plasma. Determining the spatial location of nanoparticle synthesis and growth is crucial for understanding the background conditions (e.g. background gas temperature, electron densities ...) in which nanoparticles nucleate and grow in the arc discharge environment. Future work would involve combining the LII diagnostic with other laser-based diagnostics (e.g. Rayleigh scattering, laser-induced fluorescence) for a more comprehensive study of gas-phase nanoparticle synthesis and investigating fundamental basic-science questions related to low temperature plasma physics, and laser-nanoparticle interactions.

Nanotechnology↗

DOE OSTI2017

Effects of Rangeland Evapotranspiration on Groundwater Recharge, Discharge, and Flow at the Tuba City, Arizona, Disposal Site - 17159

The US Department of Energy Office of Legacy Management is modeling groundwater flow and contaminant transport at a former uranium mill site near Tuba City, Arizona. A goal is to project groundwater travel times and flow volumes between the former mill site and Moenkopi Wash, a down-gradient stream. Aquifer recharge and discharge are sensitive model parameters; however, assigning representative rates is inexact and involves approximations. We applied a remote sensing algorithm to determine spatially variable evapotranspiration (ET), precipitation recharge, and groundwater discharge rates for use in a large scale groundwater flow model for the site. ET is the combination of evaporation and plant transpiration from soil and groundwater. We estimated landscape-scale ET over a 13-year period (2000 to 2012) for distinct plant communities within a 3531-hectare groundwater model domain (GMD), and then evaluated effects of ET on groundwater recharge and discharge within the GMD. Our empirical algorithm was derived from ground ET measurements, multispectral satellite imagery, and temperature data. Groundwater recharge or discharge rates were calculated for each plant community (or ET Zone) as the difference between precipitation (PPT) and ET rates. Recharge occurred in plant communities where PPT exceeded ET; discharge occurred where ET exceeded PPT. Estimates of groundwater recharge rates for upland plant communities that survive on meteoric water ranged from 0 to 88 mm yr{sup -1}. Estimates of groundwater discharge for phreatophyte plant communities ranged from 23 mm yr{sup -1} to 150 mm yr{sup -1}. Phreatophytes are plants that survive by extracting groundwater. Zero recharge occurred in plant communities where ET rates equaled annual average precipitation. An increase in groundwater recharge (PPT > ET) was associated with past land disturbances and heavy livestock grazing in upland areas. Groundwater discharge (ET > PPT) was highest in riparian phreatophyte communities, but lower than optimal in upland phreatophyte communities impacted by heavy grazing. Protecting phreatophyte communities from grazing at Tuba City could potentially increase ET from 153 mm yr{sup -1} to at least 500 mm yr{sup -1}. The validity of using the ET algorithm to estimate recharge and discharge was evaluated by comparing the net volumetric outflow rate for the model domain with base flow measurements collected from Moenkopi Wash. Modeled outflow approximated measured flow gains in the Wash, increasing our confidence in the ET algorithm and in the model. Results suggest that rangeland management practices that reduce groundwater recharge rates and increase groundwater discharge rates should be evaluated as part of an overall groundwater remediation strategy. (authors)

54 ENVIRONMENTAL SCIENCES↗