Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DEPTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Mechanisms Behind the Extratropical Stratiform Low-Cloud Optical Depth Response to Temperature in ARM Site Observations

Ground-based observations from three middle- and high-latitude sites managed by the U.S. Department of Energy's Atmospheric Radiation Measurement (ARM) program are used to determine the sensitivity of the low-cloud optical depth to temperature and to test whether observations support mechanisms previously proposed to affect the optical depth feedback. Analysis of cloud optical depth retrievals support previous satellite findings that the optical depth decreases or stays constant with increases in temperature when the cloud is warm but increases when the cloud is cold. The cloud liquid water path sensitivity to warming largely explains the optical depth sensitivity at all sites.Mechanisms examined in this study involve the temperature dependence of (a) the moist-adiabatic lapse rate, (b) cloud phase partitioning, (c) drying efficiency of cloud top mixing, (d) cloud top inversion strength,and (e) boundary layer decoupling. Mechanism (a) is present across all clouds and explains 30% to 50%of the increase in liquid water path with warming at temperatures below 0°C. However, the cloud's adiabaticity, the ratio between the liquid water path and its theoretical maximum, is at least as important and determines how the liquid water path sensitivity to temperature varies with temperature. At temperatures below 0°C, the adiabaticity increases with warming, and the data support mechanism (b).At warmer temperatures, the adiabaticity decreases with warming, overwhelming mechanism (a) and resulting in the liquid water path decreasing with warming. This adiabaticity decrease arises primarily because of mechanism (d), and to a lesser degree because of mechanism (e). No evidence is found supporting mechanism (c)

54 ENVIRONMENTAL SCIENCES↗

Study on the Effect of Energy Parameter of Electron on the Percentage Depth Dose of Electron Beam Using Monte Carlo Method

In medical linear accelerator, the energy parameter of electron plays important role to produce electron beam. The percentage depth dose of electron beams takes account not only on the value of electron's energy, but also on the type of electron's energy. The aims of this work are to carry on the effect of energy parameter of electron on the percentage depth dose of electron beam. Monte Carlo method is chosen in this project, due to the superior of this method for simulating the random process such as the transport particle in matter. The DOSXYZnrc usercode was used to simulate the electron transport in water phantom. Two aspects of electron's energy parameter were investigated using Monte Carlo simulations. In the first aspect, electron energy's value was varied also its spectrum. In the second aspect, the geometry of electron's energy was taken account on. The parallel beam and the point source were chosen as the geometry of The measurements of percentage depth dose were conducted to compare with its simulation. The ionization chamber was used in these measurements. Presentation of the results of this work is given not only based on the shape of the percentage depth dose from the simulation and measurement, but also on the other aspect in its curve. The result of comparison between the simulation and its measurement shows that the shape of its curve depends on the energy value of electron and the type of its energy. The energy value of electron affected the depth maximum of dose.

07 ISOTOPE AND RADIATION SOURCES↗

Capacitive radio frequency discharges with a single ring-shaped narrow trench of various depths to enhance the plasma density and lateral uniformity

Spatial structures of the electron density and temperature in ring-shaped hollow cathode capacitive rf plasma with a single narrow trench of 2 mm width have been investigated at various trench depths of D = 5, 8, 10, 12, and 15 mm. It is found that the plasma density is increased in the presence of the trench and that the radial profile of the plasma density has a peak around the narrow hollow trench near the cathode. The density becomes uniform further away from the cathode at all trench depths, whereas the electron temperature distribution remains almost uniform. The measured radial profiles of the plasma density are in good agreement with a theoretical diffusion model for all the trench depths, which explains the local density increase by a local enhancement of the electron heating. Under the conditions investigated, the trench of 10 mm depth is found to result in the highest plasma density at various axial and radial positions. The results show that the radial uniformity of the plasma density at various axial positions can be improved by using structured electrodes of distinct depths rather than planar electrodes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Combining dynamic and static depth profiling in low energy ion scattering

The advantages of combining dynamic and static depth profiling in low energy ion scattering are demonstrated for an Si/SiO{sub x}/W/Al{sub 2}O{sub 3} ALD stack. Dynamic depth profiling can be used to calibrate static depth profiling. Energy losses of 152 and 215 eV/nm were found for 3 keV {sup 4}He{sup +} and 5 keV {sup 4}He{sup +} primary ions, respectively, for the experimental configuration used. This is in good agreement with the values used in the field. Static depth profiling can be used to recognize sputter artifacts in dynamic depth profiles.

36 MATERIALS SCIENCE↗

A method to improve accuracy and precision of water surface identification for photon depth dose measurements

The objective of this study is to present a method to reduce the setup error inherent in clinical depth dose measurements and, in doing so, to improve entrance dosimetry measurement reliability. Ionization chamber (IC) depth dose measurements are acquired with the depth scan extended into the air above the water surface. An inflection region is obtained in each resulting percent depth ionization (PDI) curve that can be matched against other measurements or to an inflection region obtained from an analogous Monte Carlo (MC) simulation. Measurements are made with various field sizes for the 6 and 18 MV photon beams, with and without a Pb foil in the beam, to determine the sensitivity of the dose inflection region to the beam conditions. The offset between reference and test data set inflection regions is quantified using two separate methods. When comparing sets of measured data, maxima in the second derivative of ionization are compared. When comparing measured data to MC simulation, the offset that minimizes the sum of squared differences between the reference and test curves in the ionization inflection region is found. These methods can be used to quantify the offset between an initial setup (test) position and the true surface (reference) position. The ionization inflection location is found to be insensitive to changes in field size, electron contamination, and beam energy. Data from a single reference condition should be sufficient to identify the surface location. The method of determining IC offsets is general and should be applicable to any IC and other radiation sources. The measurement method could reduce the time and effort required in the initial IC setup at a water surface as setup errors can be corrected offline. Given a reliable set of reference data to compare with, this method could increase the ability of quality assurance (QA) measurements to detect discrepancies in beam output as opposed to discrepancies in IC localization. Application of the measurement method standardizes the procedure for localizing cylindrical ICs at a water surface and thereby improves the reliability of measurements taken with these devices at all depths.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Extraction of depth-dependent perturbation factors for silicon diodes using a plastic scintillation detector

Purpose: This work presents the experimental extraction of the perturbation factor in megavoltage electron beams for three models of silicon diodes (IBA Dosimetry, EFD and SFD, and the PTW 60012 unshielded) using a plastic scintillation detector (PSD). Methods: The authors used a single scanning PSD mounted on a high-precision scanning tank to measure depth-dose curves in 6-, 12-, and 18-MeV clinical electron beams. They also measured depth-dose curves using the IBA Dosimetry, EFD and SFD, and the PTW 60012 unshielded diodes. The authors used the depth-dose curves measured with the PSD as a perturbation-free reference to extract the perturbation factors of the diodes. Results: The authors found that the perturbation factors for the diodes increased substantially with depth, especially for low-energy electron beams. The experimental results show the same trend as published Monte Carlo simulation results for the EFD diode; however, the perturbations measured experimentally were greater. They found that using an effective point of measurement (EPOM) placed slightly away from the source reduced the variation of perturbation factors with depth and that the optimal EPOM appears to be energy dependent. Conclusions: The manufacturer recommended EPOM appears to be incorrect at low electron energy (6 MeV). In addition, the perturbation factors for diodes may be greater than predicted by Monte Carlo simulations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Campbell penetration depth in Fe-based superconductors

A 'true' critical current density, j c , as opposite to commonly measured relaxed persistent (Bean) current, j B , was extracted from the Campbell penetration depth, Λ c (T,H) measured in single crystals of LiFeAs, and optimally electron-doped Ba(Fe 0.954 Ni 0.046 ) 2 As 2 (FeNi122). In LiFeAs, the effective pinning potential is nonparabolic, which follows from the magnetic field - dependent Labusch parameter α. At the equilibrium (upon field - cooling), α(H) is non-monotonic, but it is monotonic at a finite gradient of the vortex density. This behavior leads to a faster magnetic relaxation at the lower fields and provides a natural dynamic explanation for the fishtail (second peak) effect. We also find the evidence for strong pinning at the lower fields.The inferred field dependence of the pinning potential is consistent with the evolution from strong pinning, through collective pinning, and eventually to a disordered vortex lattice. The value of jc(2 K) ≅ 1.22 x 10 6 A/cm 2 provide an upper estimate of the current carrying capability of LiFeAs. Overall, vortex behavior of almost isotropic, fully-gapped LiFeAs is very similar to highly anisotropic d-wave cuprate superconductors, the similarity that requires further studies in order to understand unconventional superconductivity in cuprates and pnictides. In addition to LiFeAs, we also report the magnetic penetration depth in BaFe 2 As 2 based superconductors including irradiation of FeNi122. In unirradiated FeNi122, the maximum critical current value is, j c (2K) ≅ 3.3 x 10 6 A/cm 2 . The magnetic-dependent feature was observed near the transition temperature in FeTe 0.53 Se 0.47 and irradiated FeNi122. Because of this feature, further studies are required in order to properly calibrate the Campbell penetration depth. Finally, we detected the crossing between the magnetic penetration depth and London penetration depth in optimally hold-doped Ba 0.6 K 0.4 Fe 2 As 2 (BaK122) and isovalent doped BaFe 2 (As 0.7 P 0.3 ) 2 (BaP122). These phenomena probably coincide with anomalous Meissner effect reported in pnicitde superconductors [Prozorov et al. (2010b)] however more studies are needed in order to clarify this.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SPRUCE S1 Bog Vegetation Survey and Peat Depth Data: 2009

This data set reports the results of a field survey of the S1 Bog to characterize the vegetation and to determine peat depth. The survey was conducted on September 21 and 22, 2009. This initial survey of vegetation and peat depth characteristics of the target bog was conducted to evaluate the logical locations for installing replicated experimental blocks for SPRUCE. The goal was to identify multiple locations of uniform aboveground vegetation and belowground peat depth for positioning experimental units within the bog. The experimental work was conducted in a Picea mariana [black spruce] - Sphagnum spp. bog forest in northern Minnesota, 40 km north of Grand Rapids, in the USDA Forest Service Marcell Experimental Forest (MEF). There is one (*.csv) data file containing the vegetation survey data and observations, and the peat depth measurements. Also included are figures of the spatial distributions of vegetation survey and peat depth results (Vegetation_survey_2009_figures.pdf). Photos of the surveyed plots are included in several *.zip files.photos.

54 ENVIRONMENTAL SCIENCES↗

Depth‐dependent concentrations of hematopoietic stem cells in the adult skeleton: Implications for active marrow dosimetry

Purpose The hematopoietically active (or red) bone marrow is the target tissue assigned in skeletal dosimetry models for assessment of stochastic effects (leukemia induction) as well as tissue reactions (marrow toxicity). Active marrow, however, is in reality a surrogate tissue region for specific cell populations, namely the hematopoietic stem and progenitor cells. Present models of active marrow dosimetry implicitly assume that these cells are uniformly localized throughout the marrow spaces of trabecular spongiosa. Data from Watchman et al. and Bourke et al., however, clearly indicate that there is a substantial spatial concentration gradient of these cells with the highest concentrations localized near the bone trabeculae surfaces. The purpose of the present study was thus to explore the dosimetric implications of these spatial gradients on active marrow dosimetry. Methods Images of several bone sites from a 45‐yr female were retagged to group active marrow voxels into 50 μm increments of marrow depth, after which electron and alpha‐particle depth‐dependent specific absorbed fractions were computed for four source tissues — active marrow, inactive marrow, bone trabeculae volumes, and bone trabeculae surfaces. Corresponding depth‐dependent S values (dose to a target tissue per decay in a source tissue) were computed and further weighted by the relative target cell concentration. These depth‐weighted radionuclide S values were systematically compared to the more traditional volume‐averaged radionuclide S values of the MIRD schema for both individual bones of the skeleton and their skeletal‐averaged quantities. Results For both beta‐emitters and alpha‐emitters localized in the active and inactive marrow, depth‐weighted S values were shown to differ from volume‐averaged S values by only a few percent, as dose gradients across the marrow tissues are nonexistent. For bone volume and bone surface sources of alpha‐emitters and lower energy beta‐emitters, when marrow dose gradients are expected, explicit consideration of target cell spatial concentration gradients are shown to significantly impact marrow dosimetry. Conclusions For medical isotopes currently utilized for treatment of skeletal metastases, namely 153 Sm and 223 Ra, accounting for hematopoietic stem and progenitor cell concentration gradients resulted in maximum percent differences to reference skeletal‐averaged S values of ~21% and 55%, respectively.

Geyer, Amy M.↗

Characterization of a fluvial aquifer at a range of depths and scales: the Triassic St Bees Sandstone Formation, Cumbria, UK

Fluvial sedimentary successions represent porous media that host groundwater and geothermal resources. Additionally, they overlie crystalline rocks hosting nuclear waste repositories in rift settings. The permeability characteristics of an arenaceous fluvial succession, the Triassic St Bees Sandstone Formation in England (UK), are described, from core-plug to well-test scale up to ~1 km depth. Within such lithified successions, dissolution associated with the circulation of meteoric water results in increased permeability (K~10{sup −1}–10{sup 0} m/day) to depths of at least 150 m below ground level (BGL) in aquifer systems that are subject to rapid groundwater circulation. Thus, contaminant transport is likely to occur at relatively high rates. In a deeper investigation (> 150 m depth), where the aquifer has not been subjected to rapid groundwater circulation, well-test-scale hydraulic conductivity is lower, decreasing from K~10{sup −2} m/day at 150–400 m BGL to 10{sup −3} m/day down-dip at ~1 km BGL, where the pore fluid is hypersaline. Here, pore-scale permeability becomes progressively dominant with increasing lithostatic load. Notably, this work investigates a sandstone aquifer of fluvial origin at investigation depths consistent with highly enthalpy geothermal reservoirs (~0.7–1.1 km). At such depths, intergranular flow dominates in unfaulted areas with only minor contribution by bedding plane fractures. However, extensional faults represent preferential flow pathways, due to presence of high connective open fractures. Therefore, such faults may (1) drive nuclear waste contaminants towards the highly permeable shallow (< 150 m BGL) zone of the aquifer, and (2) influence fluid recovery in geothermal fields.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Depth and microtopography influence microbial biogeochemical processes in a forested peatland

Background and aims: Peat-accumulating wetlands have undulating surfaces of raised areas (hummocks) and depressions (hollows). Hummock-hollow microtopography in relation to the water table influences the distribution of plant species, root density, and microbial community composition, which could in turn alter carbon (C) and nitrogen (N) cycling within peatlands. We used paired hummock and hollow cores from a boreal, forested peatland to assess how microtopography influences peatland microbial function and, in turn, ecosystem C and N cycling. Methods: The peat was analyzed for microbial biomass and potential enzyme activity in 10 cm depth increments relative to the water table, resulting in two increments for hollows and three for hummocks, which has a raised increment above the water table. Results: Across hummocks and hollows, microbial C and N and fungal biomass generally decreased with depth from the peat surface. In contrast, potential enzyme activity often increased with depth, but this varied within enzyme functional groups according to topography, depth, or both. The potential enzyme activity of C-N degrading peptidases, for example, differed across the five topography × depth increments with the lowest rate in the aerated hummocks. Hummocks compose approximately 66% of the land area at our study site and would therefore underestimate C turnover by an average of 25% if solely used to extrapolate patterns across a forested bog. Conclusion: In conclusion, our results suggest that asynchrony in C and N cycling across the undulating surface of forested peatlands impacts our ability to accurately predict biogeochemical cycling across this important ecosystem.

54 ENVIRONMENTAL SCIENCES↗

How deep to dig: effects of web-scraping search depth on hyperlink network analysis of environmental stewardship organizations

Abstract Social network analysis (SNA) tools and concepts are essential for addressing many environmental management and sustainability issues. One method to gather SNA data is to scrape them from environmental organizations’ websites. Web-based research can provide important opportunities to understand environmental governance and policy networks while potentially reducing costs and time when compared to traditional survey and interview methods. A key parameter is ‘search depth,’ i.e., how many connected pages within a website to search for information. Existing research uses a variety of depths and no best practices exist, undermining research quality and case study comparability. We therefore analyze how search depth affects SNA data collection among environmental organizations, if results vary when organizations have different objectives, and how search depth affects social network structure. We find that scraping to a depth of three captures the majority of relevant network data regardless of an organization’s focus. Stakeholder identification (i.e., who is in the network) may require less scraping, but this might under-represent network structure (i.e., who is connected). We also discuss how scraping web-pages of local programs of larger organizations may lead to uncertain results and how our work can combine with mixed methods approaches.

Sayles, Jesse S. (ORCID:0000000218378920)↗

Basalt Reactivity Variability with Reservoir Depth in Supercritical CO2 and Aqueous Phases

Long term storage of CO{sub 2} in geologic formations is currently considered the most attractive option to reduce greenhouse gas emissions while continuing to utilize fossil fuels for energy production. Injected CO{sub 2} is expected to reside as a buoyant water-saturated supercritical fluid in contact with reservoir rock, the caprock system, and related formation waters. As was reported for the first time at the GHGT-9 conference, experiments with basalts demonstrated surprisingly rapid carbonate mineral formation occurring with samples suspended in the scCO{sub 2} phase. Those experiments were limited to a few temperatures and CO{sub 2} pressures representing relatively shallow (1 km) reservoir depths. Because continental flood basalts can extend to depths of 5 km or more, in this paper we extend the earlier results across a pressure-temperature range representative of these greater depths. Different basalt samples, including well cuttings from the borehole used in a pilot-scale basalt sequestration project (Eastern Washington, U.S.) and core samples from the Central Atlantic Magmatic Province (CAMP), were exposed to aqueous solutions in equilibrium with scCO{sub 2} and water-rich scCO{sub 2} at six different pressures and temperatures for select periods of time (30 to 180 days). Conditions corresponding to a shallow injection of CO{sub 2} (7.4 MPa, 34 C) indicate limited reactivity with basalt; surface carbonate precipitates were not easily identified on post-reacted basalt grains. Basalts exposed under identical times appeared increasingly more reacted with simulated depths. Tests, conducted at higher pressures (12.0 MPa) and temperatures (55 C), reveal a wide variety of surface precipitates forming in both fluid phases. Under shallow conditions tiny clusters of aragonite needles began forming in the wet scCO{sub 2} fluid, whereas in the CO{sub 2} saturated water, cation substituted calcite developed thin radiating coatings. Although these types of coatings were sparse, conditions corresponding to deeper depths showed increasing carbonate precipitation. Basalts exposed to aqueous dissolved CO{sub 2} (25.5 MPa, 116 C) for 30 days were coated in tiny nodules of precipitate ({approx}100 {micro}m in diameter) that were identified by micro x-ray diffraction as ankerite, [Ca(Fe,Mg)(CO{sub 3}){sub 2}], a variety of dolomite commonly associated with hydrothermal and metamorphic environments. Surface characterization by SEM revealed well-developed round nodules composed of discrete individual platelets. In contrast, reaction products forming on the basalt in the corresponding wet scCO{sub 2} phase had completely different morphology, appearing in an optical microscope as a surface coating instead of discrete nodules. Examination by SEM revealed layers of discrete platelets forming a cover over a few discrete nodules. Longer test durations (180 days) produced severe iron staining along with minerals structures similar to rhodochrosite and kutnohorite. These preliminary experiments show strong evidence of the faster rate of increase in mineralization reactions taking place in the scCO{sub 2} phase, transformation reactions that are just beginning to be explored in detail.

54 ENVIRONMENTAL SCIENCES↗

Pretreatment Primary Tumor SUVmax Measured by FDG-PET and Pathologic Tumor Depth Predict for Poor Outcomes in Patients With Oral Cavity Squamous Cell Carcinoma and Pathologically Positive Lymph Nodes

Purpose: The pathologic tumor depth is an independent prognosticator for local control (LC) and survival in patients with oral cavity squamous cell carcinoma (OSCC). We sought to investigate the prognostic value of the preoperative maximal standardized uptake value (SUVmax) at the primary tumor in OSCC patients with pathologically positive lymph nodes. Methods and Materials: A total of 109 OSCC patients with pathologically positive lymph nodes were investigated. All patients underwent 2-deoxy-2[(18)F]fluoro-D-glucose-positron emission tomography within 2 weeks before surgery and neck dissection. All patients were followed for {>=}24 months after surgery or until death. The optimal cutoff value for the primary tumor SUVmax was selected according to the 5-year LC rate. Independent prognosticators were identified by Cox regression analysis. Results: The median follow-up for all patients was 26 months (39 months for surviving patients). A cutoff SUVmax of 19.3 provided the greatest prognostic information for the 5-year LC rate (55% vs. 88%, p = 0.0135). A tumor depth {>=}12 mm appeared to be the most appropriate cutoff for predicting the 5-year LC rate (76% vs. 95%, p = 0.0075). A scoring system using the primary tumor SUVmax and tumor depth was formulated to define distinct prognostic groups. Patients with both a SUVmax of {>=}19.3 and tumor depth of {>=}12 mm (n = 8) had significantly poorer 5-year LC, 5-year disease-free, 5-year disease-specific, and 5-year overall survival rates compared with the other patient groups. Conclusion: The combination of the primary tumor SUVmax ({>=}19.3) and pathologic tumor depth ({>=}12 mm) identified a subgroup of OSCC patients at greatest risk of poor LC and death.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Differences in Ice Cloud Optical Depth From CALIPSO and Ground-Based Raman Lidar at the ARM SGP and TWP Sites

Ice cloud column optical depths from the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellite and ground-based Raman lidars (RLs) at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) and Tropical Western Pacific (TWP) sites are compared for 8 and 4 years, respectively. The cloudy mean ice cloud column optical depths from CALIPSO Version 4 data product with a horizontal resolution of 5 km are 78% (63%) larger than those from the RLs with a resolution of 10 min/30 m at SGP (TWP) for collocated transparent profiles. The main difference at SGP is caused by the lidar ratio that for CALIPSO is related to its treatment of the multiple scattering factor. The main difference at TWP is caused by the averaging resolution. Large differences in the optical depth distribution between the CALIPSO and RL are found for small optical depths at both sites, which are due to optically very thin clouds only detectable by the RLs. The differences in ice cloud column optical depth distributions and their mean values between the CALIPSO and RL can largely be reconciled over both sites after accounting for the averaging resolutions, lidar ratios along with the CALIPSO multiple scattering factor treatment, sensitivity to optically very thin ice clouds, and definition of transparent profiles. This work also examines in detail the lidar ratios that are directly observed by the RLs, which does not support the temperature-dependent parameterizations of ice cloud lidar ratio and multiple scattering factor used in CALIPSO's Version 4 data product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advancing the Understanding of Snow Accumulation, Melting, and Associated Thermal Insulation Using Spatially Dense Snow Depth and Temperature Time Series

Snow thermal insulation is a critical factor influencing ground thermal dynamics and associated biogeochemical processes. We analyzed the spatiotemporal variability of snow accumulation, melting, and thermal insulation dynamics using spatially dense, collocated snow depth and ground interface temperature time series over two consecutive years. We demonstrated that considering late‐winter snow depth alone was insufficient to fully capture the complexity in snow and insulation dynamics. The influence of vegetation and topography on snow depth distribution varied over the season, across sites and years. We found that deep snow with a long melting period had a substantial impact on thawing n‐factors. To better predict snow insulation effects, we proposed a new weighted snow depth metric that integrates mean daily snow depth and air temperature throughout the cold season. Our results provide insights for developing space‐time remote sensing products and evaluating the representation of snow and permafrost processes in Earth system models.

54 ENVIRONMENTAL SCIENCES↗

Disentangling the Impacts of Microtopography and Shrub Distribution on Snow Depth in a Subarctic Watershed: Toward a Predictive Understanding of Snow Spatial Variability

Snow plays a critical role in carbon cycling, vegetation dynamics, and permafrost hydrology at high latitudes by influencing surface energy exchange. Predicting snow distribution patterns is essential for understanding the evolution of Arctic ecosystems, yet scaling process-level knowledge to landscape predictions remains challenging. Here, we analyze snow depth (2019 and 2022), terrain elevation, and vegetation height from a watershed on the Seward Peninsula, Alaska, to examine how topography and shrubs shape snow redistribution across spatial scales. We find that snow depth is strongly coupled to terrain at scales below ∼60 m but becomes increasingly decoupled at larger scales. The topographic model of snow depth variation, which transforms terrain data to align with these scale-dependent snow patterns, is well correlated with local snow depth variations (linear fit R 2 > 0.5 for 85% of 100-m patches). A machine learning reconstruction of shrub canopy snow trapping reveals a simple exponential relationship between canopy structure and snow accumulation ( R 2 = 0.59), highlighting the combined influence of topography and vegetation on snow distribution. Together, these empirical relationships capture much of the observed snow variability in the watershed ( R 2 = 0.49, root mean square error (RMSE) = 30 cm), though systematic limitations persist in areas of strong scour and at coarser scales where wind-terrain interactions are more complex. These findings provide a framework for more efficient snow depth prediction and offer insights to improve snow-vegetation feedback representation in Earth System Models.

54 ENVIRONMENTAL SCIENCES↗

Agricultural practices influence soil microbiome assembly and interactions at different depths identified by machine learning

Agricultural practices affect soil microbes which are critical to soil health and sustainable agriculture. To understand prokaryotic and fungal assembly under agricultural practices, we use machine learning-based methods. We show that fertility source is the most pronounced factor for microbial assembly especially for fungi, and its effect decreases with soil depths. Fertility source also shapes microbial co-occurrence patterns revealed by machine learning, leading to fungi-dominated modules sensitive to fertility down to 30 cm depth. Tillage affects soil microbiomes at 0-20 cm depth, enhancing dispersal and stochastic processes but potentially jeopardizing microbial interactions. Cover crop effects are less pronounced and lack depth-dependent patterns. Machine learning reveals that the impact of agricultural practices on microbial communities is multifaceted and highlights the role of fertility source over the soil depth. Machine learning overcomes the linear limitations of traditional methods and offers enhanced insights into the mechanisms underlying microbial assembly and distributions in agriculture soils.

60 APPLIED LIFE SCIENCES↗