Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CuO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Dual aging pathways of Cu-SSZ-13 SCR catalysts: Hydrothermal vs. sulfur-induced deactivation

Hydrothermal aging (HTA) and chemical poisoning are two primary factors contributing to the real-world degradation of Cu-SSZ-13 SCR catalysts. Investigating field-returned samples offers valuable insights into performance degradation caused by these mechanisms. However, the simultaneous presence of both deactivation pathways complicates the isolation of their individual effects in post-mortem analyses. In this study, we separately prepared model Cu-SSZ-13 SCR catalysts subjected to hydrothermal-aging and sulfur-induced chemical poisoning. Using various characterization techniques, we elucidated the specific role of each aging process in catalyst deactivation and compared the results to real-world field-aged catalysts. Our findings show that hydrothermal aging at 650 °C for 100 h caused dealumination of the zeolite framework but no significant CuO x cluster formation. In contrast, sulfur aging (via sulfur exposure, calcination at 550 °C, and desulfation up to 750 °C) led to CuO x formation without any observable dealumination. On model catalysts, sulfur poisoning was found to reduce Cu mobility and the amount of active Cu sites, thus degrading catalyst activity. Although some activity was recovered upon desulfation, a portion of the initial catalyst activity remained irreversibly lost due to CuO x formation. We demonstrate that this occurs because sulfated species impede the ability of multi-nuclear Cu species (e.g., Cu dimers) to split back into their isolated form, leading to CuSO 4 -clusters that oxidatively desulfate to CuO x species. This degradation pathway explains the significant reduction in activity of field-aged samples, where substantial CuSO 4 -cluster accumulation leads to reduced active Cu and subsequent conversion to CuO x . Furthermore, the conclusions from model catalysts were extended directly to field-aged commercial samples, elucidating the decline in activity and chemical properties during field deployment.

Catalyst Deactivation↗
DOE OSTI2025

Structural Transformation and Degradation of Cu Oxide Nanocatalysts during Electrochemical CO 2 Reduction

The electrochemical CO 2 reduction reaction (CO 2 RR) holds enormous potential as a carbon-neutral route to the sustainable production of fuels and platform chemicals. The durability for long-term operation is currently inadequate for commercialization, however, and the underlying deactivation process remains elusive. A fundamental understanding of the degradation mechanism of electrocatalysts, which can dictate the overall device performance, is needed. In this work, we report the structural dynamics and degradation pathway of Cu oxide nanoparticles (CuO x NPs) during the CO 2 RR by using in situ small-angle X-ray scattering (SAXS) and X-ray absorption spectroscopy (XAS). The in situ SAXS reveals a reduction in the size of NPs when subjected to a potential at which no reaction products are detected. At potentials where the CO 2 RR starts to occur, CuO x NPs are agglomerated through a particle migration and coalescence process in the early stage of the reaction, followed by Ostwald ripening (OR) as the dominant degradation mechanism for the remainder of the reaction. As the applied potential becomes more negative, the OR process becomes more dominant, and for the most negative applied potential, OR dominates for the entire reaction time. The morphological changes are linked to a gradual decrease in the formation rate for multicarbon products (C 2 H 4 and ethanol). Other reaction parameters, including reaction intermediates and local high pH, induce changes in the agglomeration process and final morphology of the CuO x NPs electrode, supported by post-mortem ex situ microscopic analysis. The in situ XAS analysis suggests that the CuO x NPs reduced into the metallic state before the structural transformation was observed. The introduction of high surface area carbon supports with ionomer coating mitigates the degree of structural transformation and detachment of the CuO x NPs electrode. These findings show the dynamic nature of Cu nanocatalysts during the CO 2 RR and can serve as a rational guideline toward a stable catalyst system under electrochemical conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An Electrochemical Electrode to Detect Theophylline Based on Copper Oxide Nanoparticles Composited with Graphene Oxide

The electrochemical analysis of theophylline (THP) was investigated by fabricating a carbon paste electrode (CPE) modified with graphene oxide (GO) along with copper oxide (CuO) nanoparticles (CuO-GO/CPE). The impact of electro-kinetic parameters such as the heterogeneous rate constant, the scan rate, the accumulation time, the pH, the transfer coefficient, and the number of electrons and protons transferred into the electro-oxidation mechanism of THP has been studied utilizing electrochemical methods such as cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The differential pulse voltammetry technique was employed to investigate THP in pharmaceutical and biological samples, confirming the limit of detection (LOD) and quantification (LOQ) of the THP. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis were performed to characterize the CuO nanoparticles. The CuO-GO/CPE was more sensitive in THP detection because its electrocatalytic characteristics displayed an enhanced peak current in the 0.2 M supporting electrolyte of pH 6.0, proving the excellent sensing functioning of the modified electrode.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Insights into Copper Sulfide Formation from Cu and S K edge XAS and DFT studies

An understanding of the fundamentals of the reaction between CuO with trace amounts of H 2 S to form CuS products is critical for the optimal utilization of this process in sulfur removal applications. Unfortunately, CuS is a complex material, featuring various Cu 2-x S compounds (with 0 ≤ x ≤ 1), distorted crystal phases, and varying electronic structures and coordination environments of Cu and S ions. In this work, we combine ex situ and in situ X-ray absorption spectroscopy (XAS) at S and Cu K edges, fixed bed sorption experiments, DFT simulations, and other characterization techniques to speciate the CuS products formed at different temperatures (298–383 K) and from CuO sorbents with different crystallite sizes (2.8–40 nm). The results of our analysis identify the formation of a distorted CuS layer at the surface of CuO crystals with disulfide groups with shorter Cu–S bonds and higher delocalization of the positive charge of the Cu center into (S 1– )2. This distorted CuS layer dominates the XAS signal at lower temperatures (298–323 K) and at the initial stages of sulfidation at higher temperatures (353 and 383 K) where conversion is low (<40%). First-principles atomistic simulations confirm the thermodynamic favorability of the formation of surface (S 1– )2 on both CuO (111) and ($\bar{1}11$) surfaces, providing further support for our experimental observations. Furthermore, these simulations reveal that the presence of disulfide bonds stabilized surface hydroxyl groups, leading to lower Gibbs Free Energies of their surface migration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Lithium cuprate, a multifunctional material for NO selective catalytic reduction by CO with subsequent carbon oxide capture at moderate temperatures

Li 2 CuO 2 was evaluated as a possible catalyst for the NO selective catalytic reduction (NO SCR) by CO. The initial idea was supported by ab initio thermodynamic analysis. This analysis showed that NO SCR was favored by using Li 2 CuO 2 as a catalyst, based on the calculated heat of reaction and Gibbs free energy. The NO SCR reaction was evaluated under dynamic, isothermal and cyclic conditions using different NO : CO ratios (2 : 1, 1 : 1 and 1 : 2). The dynamic and isothermal experiments showed that Li 2 CuO 2 does reduce NO in the presence of CO to reach higher conversions (>90%) between 400 and 450 °C. However, it must be mentioned that the catalytic process was reduced once some of the produced CO 2 was captured on the ceramic. At that point, Li 2 CuO 2 acts as a bifunctional material, catalyzing the NO SCR reaction and capturing some of the produced CO 2 . Moreover, cyclic experiments evidenced high NO reduction. Finally, a different set of experiments showed that this catalytic reduction performed differently if NO and CO were previously fed. Finally, when lithium cuprate is previously carbonated (initial CO feed), the catalytic reaction does not complete. In contrast, when there was a previous nitrate formation (initial NO feed), the reaction reached 100% efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tunneling spectroscopy of c -axis epitaxial cuprate junctions

Atomically precise epitaxial structures are unique systems for tunneling spectroscopy that minimize extrinsic effects of disorder. We present a systematic tunneling spectroscopy study, over a broad doping, temperature, and bias range, in epitaxial c-axis La 2-x Sr x CuO 4 /La 2 CuO 4 /La 2-x Sr x CuO 4 heterostructures. The behavior of these superconductor/insulator/superconductor (SIS) devices is unusual. Down to 20 mK there is complete suppression of c-axis Josephson critical current with a barrier of only 2 nm of La 2 CuO 4 , and the zero-bias conductance remains at 20–30% of the normal-state conductance, implying a substantial population of in-gap states. Tunneling spectra show greatly suppressed coherence peaks. Furthermore, as the temperature is raised, the superconducting gap fills in rather than closing at T c . For all doping levels, the spectra show an inelastic tunneling feature at ~80 meV, suppressed as T exceeds T c . These nominally simple epitaxial cuprate junctions deviate markedly from expectations based on the standard Bardeen-Cooper-Schrieffer theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Nanoscale structural correlations in a model cuprate superconductor

Understanding the extent and role of inhomogeneity is a pivotal challenge in the physics of cuprate superconductors. While it is known that structural and electronic inhomogeneity is prevalent in the cuprates, it has proven difficult to disentangle compound-specific features from universally relevant effects. Here, in this study, we combine advanced neutron and x-ray diffuse scattering with numerical modeling to obtain insight into bulk structural correlations in HgBa 2 ⁢ CuO 4+δ . This cuprate exhibits a high optimal transition temperature of nearly 100 K, pristine charge-transport behavior, and a simple average crystal structure without long-range structural instabilities, and is therefore uniquely suited for investigations of intrinsic inhomogeneity. We uncover diffuse reciprocal-space patterns that correspond to prominent nanoscale correlations of atomic displacements perpendicular to the CuO 2 planes. The real-space nature of the correlations is revealed through three-dimensional pair distribution function analysis and complementary numerical refinement. We find that relative displacements of ionic and CuO 2 layers play a crucial role, and that the structural inhomogeneity is not directly caused by the presence of conventional point defects. The observed correlations are therefore intrinsic to HgBa 2 ⁢ CuO 4+δ , and thus likely important for the physics of cuprates more broadly. It is possible that the structural correlations are closely related to the unusual superconducting fluctuations and Mott-localization in these complex oxides. As advances in scattering techniques yield increasingly comprehensive data, the experimental and analysis tools developed here for large volumes of diffuse scattering data can be expected to aid future investigations of a wide range of materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1991

Magnetism and superconductivity of some Tl-Cu oxides

Many copper oxide based Thallium compounds are now known. In comparison to the Bi-compounds, the Tl-system shows a richer diversity; i.e., High Temperature Superconductors (HTSC) can be obtained with either one or two Tl-0 layers (m = 1,2); also, the triple-digit phases are easier to synthesize. The value of d, oxygen stoichiometry, is critical to achieving superconductivity. The Tl system is robust to oxygen loss; Tl may be lost or incorporated by diffusion. A diffusion coefficient equal to 10 ms at 900 C was determined. Both ortho-rhombic and tetragonal structures are found, but HTSC behavior is indifferent to the crystal symmetry. This system has the highest T(sub c) confirmed. T(sub c) generally increases with p, the number of CuO layers, but tends to saturate at p = 3. Zero resistance was observed at temperatures as great as 125 K. Most of these HTSC's are hole type, but the Ce-doped specimens may be electronic. The magnetic aspects were studied; because in addition to defining the perfectly diamagnetic ground state as in conventional superconductors, magnetism of the copper oxides show a surprising variety. This is true of both the normal and the superconducting states. Also, due to the large phonon contribution to the specific heat at the high T(sub c) jump, electronic density of states, D(Ef), and coherence length are uncertain, and thus, are estimated from the magnetic results. Results from the Tl-system CuO, LaBaCuO,120 and the Bi-CuO compounds are discussed. The emphasis is on the role of magnetism in the Tl-CuO HTSC, but technological aspects are also pointed out.

Datta, Timir↗
NASA NTRS1995

Performance and optimization of a combustion interface for isotope ratio monitoring gas chromatography/mass spectrometry

Conditions and systems for on-line combustion of effluents from capillary gas chromatographic columns and for removal of water vapor from product streams were tested. Organic carbon in gas chromatographic peaks 15 s wide and containing up to 30 nanomoles of carbon was quantitatively converted to CO2 by tubular combustion reactors, 200 x 0.5 mm, packed with CuO or NiO. No auxiliary source of O2 was required because oxygen was supplied by metal oxides. Spontaneous degradation of CuO limited the life of CuO reactors at T > 850 degrees C. Since NiO does not spontaneously degrade, its use might be favored, but Ni-bound carbon phases form and lead to inaccurate isotopic results at T < 1050 degrees C if gas-phase O2 is not added. For all compounds tested except CH4, equivalent isotopic results are provided by CuO at 850 degrees C, NiO + O2 (gas-phase mole fraction, 10(-3)) at 1050 degrees C and NiO at 1150 degrees C. The combustion interface did not contribute additional analytical uncertainty, thus observed standard deviations of 13C/12C ratios were within a factor of 2 of shot-noise limits. For combustion and isotopic analyses of CH4, in which quantitative combustion required T approximately 950 degrees C, NiO-based systems are preferred, and precision is approximately 2 times lower than that observed for other analytes. Water must be removed from the gas stream transmitted to the mass spectrometer or else protonation of CO2 will lead to inaccuracy in isotopic analyses. Although thresholds for this effect vary between mass spectrometers, differential permeation of H2O through Nafion tubing was effective in both cases tested, but the required length of the Nafion membrane was 4 times greater for the more sensitive mass spectrometer.

NASA Discipline Exobiology↗
DOE OSTI2022

Super-porous Pt/CuO/Pt hybrid platform for ultra-sensitive and selective H 2 O 2 detection

A super-porous Pt/CuO/Pt hybrid electrode is demonstrated with extremely high sensing performance parameters for the hydrogen peroxide (H 2 O 2 ) detection. A unique physiochemical approach is adapted for the fabrication of 3-D super-porous Pt/CuO/Pt sensing platform. Here, the super-porous Pt/CuO/Pt hybrid platform demonstrates a superior sensitivity of 16,694 µA mM -1 cm -2 with a limit of detection of 2.91 nM (S/N = 3). It also demonstrates an excellent selectivity against the interfering molecules such as NaCl, fructose, ascorbic acid, citric acid, dopamine and glucose with a wide linear range. The demonstrated performance ranks the Pt/CuO/Pt hybrid platform as one of the best H 2 O 2 sensors as summarized in the Table 2. The super-porous CuO layer is fabricated by a dynamic hydrogen bubbling technique of electrochemical deposition and metallic Pt NP decoration is achieved by the physical vapor deposition (PVD) and post-annealing. The super-porous CuO layer offers a drastically improved electrochemical active surface area, and the Pt NP decoration offers a significantly improved conductivity and improved charge accumulation for the H 2 O 2 reduction. The DFT simulations confirm the predominance of CuO over Cu 2 O and Pt over Pd for the H 2 O 2 detection based on the adsorption energy, density of states and charge accumulation calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Long‐Range Confinement‐Driven Enrichment of Surface Oxygen‐Relevant Species Promotes C−C Electrocoupling in CO 2 Reduction

Abstract CO 2 reduction is a highly attractive route to transform CO 2 into useful feedstocks, of which C 2 products are more desired than C 1 , yet face high kinetic barriers of C−C electrocoupling. Here, the engineering of pore‐enabled local confinement reaction environments is reported for tuning the enrichment of surface‐adsorbed oxygen‐relevant species and the establishment of their pronounced benefits in promoting C−C coupling over oxide‐derived Cu‐based catalysts. A new approach of utilizing the microphase separation of a block copolymer is developed to fabricate bicontinuous mesoporous CuO nanofibers (CuO‐BPNF). The enhanced confinement from long‐range mesochannels enables the adsorption of OH ad /O ad on the Cu surface at a wide negative potential range of −0.7 – −1.3 V in CO 2 reduction, which cannot be achieved over conventional deficient and short‐range pores. Constant‐potential DFT calculations reveal that the surface‐bound oxygen species weakens *CO affinity with the Cu (111) surface and lowers the kinetic barriers for both *CO−CO dimerization and *CO hydrogenation to enable *CO−CHO coupling. Accordingly, a CO 2 ‐to‐C 2 Faradaic efficiency of 74.7% over CuO‐BPNF is shown, significantly larger than counterparts with conventional pores. This work offers a general design principle of confinement engineering to manage the adsorption of reactive species for steering reaction pathways in interfacial catalysis.

Chemistry↗
DOE OSTI2020

Synthesis and Characterization of Tris(oxazolinyl)borato Copper(II) and Copper(I) Complexes

The reaction of To M Tl (To M =tris(4,4-dimethyl-2-oxazolinyl)phenylborate) and CuBr 2 in benzene at 60 °C provides To M CuBr (1) as an entry-point into tris(oxazolinyl)phenylborato copper chemistry. In this work, To M CuO t Bu (2) and To M CuOAc (3) are prepared by the reactions of To M CuBr with KO t Bu and NaOAc, respectively. To M CuO t Bu is transformed into (To M CuOH) 2 (4) through hydrolysis. NMR, FT-IR, and EPR spectroscopies are used to determine the electronic and structural properties of these copper(II) compounds, and the solid-state structures were characterized by X-ray crystallography. Reduction of copper is observed upon treatment of To M CuO t Bu with phenylsilane in an attempt to synthesize monomeric copper(II) hydride. To M Cu (5) and To M 2 Cu (6) were independently synthesized and characterized for comparison.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mechanisms and site requirements for NO and NH 3 oxidation on Cu/SSZ-13

Two series of Cu/SSZ-13 catalysts were synthesized via aqueous solution and solid-state ion exchange using SSZ-13 supports of varying Si/Al ratios. The isolated and multinuclear Cu content of these catalysts were determined by H 2 temperature programmed reduction (H 2 -TPR). Multinuclear Cu in these catalysts, including in situ Cu- dimers formed from ZCu II OH coupling and permanent CuO clusters, are active species for dry NO oxidation. NH 3 oxidation on these catalysts follows an internal SCR (i-SCR) mechanism, i.e., a portion of NH 3 is first oxidized to NO, then NO is selectively reduced by the remaining NH 3 to N 2 . NH 3 oxidation displays distinct kinetic behavior below ~300 °C and above ~400 °C. At low temperature the results indicate that NH 3 -solvated mobile Cu-ions are the active centers. CuO clusters, when present, also contribute to the low temperature activity by catalyzing NH 3 oxidation to NO. At high temperature, in situ Cu-dimers and CuO clusters catalyze NH 3 oxidation to NO, and isolated Cu-ions catalyze SCR to realize the cascade turnovers. For both NO and NH 3 oxidation, Cu-dimers balanced by framework charges of close proximity appear to be more active than Cu-dimers balanced by distant framework charges. However, the former Cu-dimers are less stable than the latter and tend to split into monomers in the presence of vicinal Brønsted acid sites. Via density functional theory (DFT) calculations, the i-SCR mechanism for low temperature NH 3 oxidation, i.e., the energetic favorability for the involvement of the NO intermediate, is justified. Furthermore, the DFT results also agree with experimental data that the formation of Cu-dimers from ZCu II OH dimerization is essential for NH 3 oxidation at high temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Preparation and Structural Characterization of ZrO 2 /CuO x /Cu(111) Inverse Model Catalysts

CO 2 hydrogenation to methanol is regarded as a promising reaction to catalytically convert a major greenhouse gas (CO 2 ) into a value-added product (methanol). In the current study, scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS) were applied to investigate the growth mode of low coverages (<0.2 ML) of ZrO 2 in an inverse ZrO 2 /CuOx/Cu(111) system, which has the potential to achieve a high selectivity for a direct CO 2 to methanol transformation. It was found that the morphology of ZrO 2 was strongly affected by the preparation method. The ZrO 2 /CuO x /Cu(111) model catalyst prepared by the oxidation at 600 K of Zr pre-deposited on Cu(111) exhibited substantial mixing of ZrO 2 and CuO x . In contrast, the direct deposition of Zr under an O 2 ambient over CuO x /Cu(111) at 600 K produced small ZrO 2 islands (10-12 nm in size) with a two-dimensional structure (i.e. only one layer of ZrO 2 ). XPS studies indicate that both preparation methods lead to ZrO 2 /CuO x /Cu(111) surfaces. The model catalyst prepared by the direct deposition of Zr in O 2 was annealed up to 700 K in ultra-high vacuum. Both STM and XPS results suggest no apparent change in ZrO 2 , while CuO x was reduced at such annealing conditions. The island size of 10-12 nm observed for ZrO 2 on Cu(111) is much smaller than island sizes seen for CeO 2 (30-50 nm) and ZnO (300-500 nm) on the same substrate, opening the possibility for unique chemical properties

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Rechargeable Alkaline Zinc/Copper Oxide Batteries

Resurrecting a battery chemistry thought to be only primary, we demonstrate the first example of a rechargeable alkaline zinc/copper oxide battery. With the incorporation of a Bi 2 O 3 additive to stabilize the copper oxide-based conversion cathode, Zn/(CuO–Bi 2 O 3 ) cells are capable of cycling over 100 times at >124 W h/L, with capacities from 674 mA h/g (cycle 1) to 362 mA h/g (cycle 150). The crucial role of Bi 2 O 3 in facilitating the electrochemical reversibility of Cu 2 O, Cu(OH) 2 , and Cu o was supported by scanning and transmission electrochemical microscopy, cyclic voltammetry, and rotating ring-disc electrode voltammetry and monitored via operando energy-dispersive X-ray diffraction measurements. Bismuth was identified as serving two roles, decreasing the cell resistance and promoting Cu(I) and Cu(II) reduction. Additionally, to mitigate the capacity losses of long-term cycling CuO cells, we demonstrate two limited depth of discharge (DOD) strategies. First, a 30% DOD (202 mA h/g) retains 99.9% capacity over 250 cycles. Second, the modification of the CuO cathode by the inclusion of additional Cu metal enables performance at very high areal capacities of ~40 mA h/cm 2 and unprecedented energy densities of ~260 W h/L, with near 100% Coulombic efficiency. This work revitalizes a historically primary battery chemistry and opens opportunity to future works in developing copper-based conversion cathode chemistries for the realization of low-cost, safe, and energy-dense secondary batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Characterization of Sequentially Extracted Soil Organic Matter by Electrospray Ionization and Atmospheric Pressure Photoionization Fourier Transform Ion Cyclotron Resonance Mass Spectrometry

Soil organic matter (SOM) is a complex mixture of small molecules and biopolymers that are active in various biogeochemical processes. However, the chemical diversity of biopolymer-derived SOM remains poorly explored. Identifying this diversity is important because global environmental changes may well alter SOM chemistry, as field experiments are beginning to show. Here, organic solvent-extractable (DcMe-SOM), base-hydrolyzable (KOH Hy -SOM), and CuO-oxidizable (CuO Ox -SOM) SOM fractions from a forest with a long-term nitrogen addition experiment were sequentially extracted and characterized by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) coupled with negative-ion electrospray ionization (ESI) or atmospheric pressure photoionization (APPI). From DcMe-SOM to CuO Ox -SOM, the total number of assigned formulas, average O/C ratio, aromaticity, and unsaturation degree of SOM continuously increased, while the average m/z and H/C ratio decreased. Moreover, the dominant chemical category shifted from lipid-like components to phytochemical- and protein-like components. Complementary to ESI, APPI effectively facilitated detection of additional compounds with low polarity. With long-term nitrogen addition, the average m/z, unsaturation degree, aromaticity, and oxidation state of SOM increased, and more aromatic nitrogen-containing formulas were detected in CuOOx-SOM. Our study demonstrates that chronic nitrogen deposition in forests alters both the small molecules and biopolymers of SOM fundamentally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Photoelectrochemical Nitrogen Reduction to Ammonia on Cupric and Cuprous Oxide Photocathodes

Photoelectrochemical N 2 reduction enables the production of NH 3 under ambient conditions using water as the hydrogen source. Furthermore, by utilizing solar energy, photoelectrochemical N 2 reduction can significantly reduce the energy input required for N 2 reduction. In this study, photoelectrochemical N 2 production was investigated using CuO and Cu 2 O photocathodes that are known to be poorly catalytic for water reduction, the major reaction competing with N 2 reduction. When tested under simulated solar illumination with isotopically labeled 15 N 2 in 0.1 M KOH solution, the CuO and Cu 2 O photocathodes produced 15 NH 3 with a Faradaic efficiency of 17% and 20% at 0.6 V and 0.4 V vs. RHE, respectively. These potentials are significantly more positive than the thermodynamic reduction potential of N 2 , which demonstrates how the use of photoexcited electrons in the CuO and Cu 2 O photocathodes can reduce the energy input required for NH 3 production. Here, the use of photoexcited electrons in these photocathodes for N 2 reduction, water reduction, and photocorrosion was carefully examined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗