Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cr”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

In-beam γ-ray spectroscopy of 62,64 Cr

The region of neutron-rich Cr isotopes has garnered much attention in recent years due to a rapid onset of collectivity near neutron number N = 40. We report here on the first γ-ray spectroscopy beyond the ($4$ $^{+}_{1}$) state in 62,64 Cr, using nucleon removal reactions from several projectiles within a rare-isotope beam cocktail. A candidate for the 6 + state in 64 Cr is presented as well as one for, possibly, the second excited 0 + state in 62 Cr. The results are discussed in comparison to the LNPS shell-model predictions that allow for neutron excitations across the N = 40 harmonic oscillator gap into the g 9/2 and d 5/2 orbitals. Here, the calculated level schemes for 62,64 Cr reveal intriguing collective structures. From the predicted neutron particle-hole character of the low-lying states in these Cr isotopes, 62 Cr emerges as a transitional system on the path to the center of the N = 40 island of inversion.

59 ≤ A ≤ 89↗
DOE OSTI2025

Experimental study of 53 Cr via the (𝑑, 𝑝⁢𝛾) reaction

Excited states in 53 Cr were studied via the 52 Cr ⁢(𝑑, 𝑝⁢𝛾) reaction up to the neutron-separation threshold. Proton-𝛾 angular correlations and 𝛾 decay branching ratios were measured in particle-𝛾 coincidences between the Super-Enge Split-Pole Spectrograph (SE-SPS) and CeBr 3 Array (CeBrA) demonstrator of the John D. Fox Accelerator Laboratory at Florida State University. Previous spin-parity assignments from a (𝑑,𝑝) singles experiment at the SE-SPS are supported and 𝛾-ray transitions in 53 Cr are reported. We firmly assign higher-lying excited states to 53 Cr because overlapping excited states and contaminants could be identified better due to the complementary 𝛾-decay information. We also correct some of the previously reported excitation energies and present a reanalysis of previously measured 52 Cr (𝑑, 𝑝)⁢ 53 Cr angular distributions guided by the complementary 𝛾-ray information. Based on this reanalysis, the fragmentation of the neutron 2⁢𝑝 3/2 , 2⁢𝑝 1/2 , 1⁢𝑓 5/2 , 1⁢𝑔 9/2 , and 2⁢𝑑 5/2 single-particle strengths is reassessed for 53 Cr. Here, a comparison to the corresponding strengths in 55 Fe is presented.

39 ≤ A ≤ 58↗
DOE OSTI2021

Minimizing Cr-Evaporation from Balance Of Plant Components By Utilizing Cost-Effective Alumina-Forming Austenitic Steels

A solid oxide fuel cell (SOFC) is a clean and efficient energy conversion device. The development of intermediate-temperature SOFCs has made it preferable to use metallic interconnects (MICs) to greatly reduce the cost and significantly increase the efficiency compared to ceramic interconnect materials. However, gaseous chromium species will evaporate from the chromium-containing layer formed on the surface of commonly used MICs and balance of plant (BoP) components. Volatile chromium species have been shown to form solid deposits which poison the cathodes of SOFCs, causing drastic cell performance degradation and thereby limiting commercialization. In order to alleviate the Cr poisoning and achieve long-term high performance of SOFC stacks, various Al 2 O 3 -forming austenitic (AFA) stainless steels applied at different temperatures are evaluated in this project. Based on our Phase I results (500 h operation), it is shown that on the AFAs, an alumina-based protective layer forms under high temperature that is invulnerable to water vapor effects and suppresses the diffusion of chromium and manganese which can prevent the generation of spinels on the alloy surface. Therefore, 310S, OC4 and OC5 at 800 °C and 625, OC11 and OC11LZ at 900 °C are selected to be tested in the Phase II long-term operation. From the results, we find that besides the lower Cr evaporation rates and better oxidation resistance of AFAs than benchmark alloys after short-term (500 h) operation, AFAs also possess the sturdy and compact alumina layer after a long-term operation (5000 h). A protective oxide layer is of great importance for the long-term high-temperature operation of structural materials. The high-temperature oxidation behavior of AFAs and commercial 310S and 625 alloys in Air + 10% H 2 O at 800 °C and 900 °C is systematically investigated. Severe breakaway oxidation and minor spallation are observed for the 310S and 625 after the long-term operation, while the AFAs show high oxidation resistance. It is found that the formation of a continuous alumina layer could greatly prevent the volatilization of chromium vapors. In addition, the corresponding evolving models are discussed. Chromium evaporation from BoP components in high-temperature environment could severely deteriorate the electrochemical performance of SOFC. Several methods were applied to evaluate the Cr evaporation rates of BoP after 500 h exposure at 800 °C to 900 °C in air with 10% H 2 O. An optimal method was designed to exclude the effect of silicon (Si) deposits from quartz tube and sodium (Na) deposits from the sodium carbonate on the oxidation process and the chemical interaction between Cr gaseous species and alumina tube which could provide further quantitative correlation of the evaporated Cr species quantities and degradation rates of SOFC. Based on the great performance of AFAs after long-term operation, AFAs are assembled with Anode-supported cells (ASC) to investigate the the Cr deposition of anode-supported cell under a constant current density of 0.5 A cm -2 at 800 °C with AFA alloys compared with commercial alloys. In addition, the anodic and cathodic processes are deconvoluted by distribution of relaxation times (DRT) method which are comprehensively discussed. It is found out that the voltage exhibited a slight decrease of 5.09 % and 1.54 % in the presence of OC11 and OC11LZA alloy, respectively. However, a considerable decrease of 22.14 % and 12.06 % was determined in the presence of 310S and 625 alloy, respectively. AFAs possessing the low-cost, low Cr evaporation rates and the high oxidation resistance will make it of great potential to replace the existing BoP components.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Effect of Cr and Al on Elastic Constants of FeCrAl Alloys Investigated by Molecular Dynamics Method

The FeCrAl alloy system is recognized as one of the candidate materials for accident-tolerant fuel (ATF) cladding in the nuclear power industry due to its high oxidation resistance under irradiation and high-temperature environments. The concentrations of Cr and Al have a significant effect on elastic properties of the FeCrAl alloy. In this work, elastic constants C 11 , C 12 , C 44 , bulk modulus and shear modulus of FeCrAl alloy were calculated with molecular dynamics methods. We explored compositions with 1–15 wt.% Cr and 1–5 wt.% Al at temperatures from 0 K to 750 K. The results show that the concentrations of Al and Cr have different effects on the elastic constants. When the concentration of Al was fixed, a decrease in bulk modulus and shear modulus with increasing Cr content was observed, consistent with previous experimental results. The dependence of elastic constants on temperature was also the same as in the experiments. Investigations into elastic properties of defect-containing alloys have shown that vacancies, voids, interstitials and Cr-rich precipitations have different effects on elastic properties of FeCrAl alloys. Investigations of elastic properties of defect-containing alloys have shown that vacancies, void, interstitials and Cr-rich precipitations have different effects on elastic properties of FeCrAl alloys. Therefore, the present results indicate that both the Cr and Al concentrations and radiation defects should be considered to develop and apply the FeCrAl alloy in ATF design.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Role of Cr Content in Microstructure, Creep, and Oxidation Resistance of Alumina-Forming Austenitic Alloys at 850–900 °C

Creep-rupture properties and oxidation behavior of a series of alumina-forming austenitic (AFA) alloys with variations of Cr contents, based on Fe-(13.5-18)Cr-25Ni-4Al-1.5Nb-0.1C in weight percent, have been evaluated at 850–900 °C. The study investigates material responses in the properties and microstructure through compositional modifications in AFA alloys, targeting performance optimization of alloys under high-temperature, corrosive industrial environments. The creep-rupture life of the alloys at 850 °C and 30MPa monotonically decreased with increasing Cr content, which was correlated with changes in secondary phase volume fractions, such as the reduction in B2-NiAl + Laves-Fe2Nb and increase in Sigma-FeCr with Cr content. The oxidation test at 900 °C in a water-vapor containing environment revealed a range of Cr content from 13.9 to 15.7 wt.%, enabling the formation of stable, protective external alumina scale as well as preventing internal oxidation/nitridation for up to total 7000 h exposure. On the other hand, the alloys with >16.7 wt.% Cr formed Sigma precipitates, which caused a reduction in not only Cr but also Al in the austenite matrix, resulting in less oxidation resistance than other alloys. The findings will guide the further optimization of material performance in the AFA alloy series.

36 MATERIALS SCIENCE↗
NASA NTRS2005

The Mn-53-Cr-53 System in CAIs: An Update

High precision techniques have been developed for the measurement of Cr isotopes on the Triton mass spectrometer, at JPL. It is clear that multiple Faraday cup, simultaneous ion collection may reduce the uncertainty of isotope ratios relative to single Faraday cup ion collection, by the elimination of uncertainties from ion beam instabilities (since ion beam intensities for single cup collection are interpolated in time to calculate isotope ratios), and due to a greatly increased data collection duty cycle, for simultaneous ion collection. Efforts to measure Cr by simultaneous ion collection have not been successful in the past. Determinations on Cr-50-54Cr, by simultaneous ion collection on the Finnigan/ MAT 262 instrument at Caltech, resulted in large variations in extrinsic precision, for normal Cr, of up to 1% in Cr-53/Cr-52 (data corrected for mass fractionation, using Cr-50/Cr-52).

Papanastassiou, D. A.↗
DOE OSTI2021

Minimizing Cr-Evaporation from Balance of Plant Components by Utilizing Cost-Effective Alumina-Forming Austenitic Steels

A solid oxide fuel cell (SOFC) is a clean and efficient energy conversion device. The development of intermediate-temperature SOFCs has made it preferable to use metallic interconnects (MICs) to greatly reduce the cost and significantly increase the efficiency compared to ceramic interconnect materials. However, gaseous chromium species will evaporate from the chromium-containing layer formed on the surface of commonly used MICs and balance of plant (BoP) components. Volatile chromium species have been shown to form solid deposits which poison the cathodes of SOFCs, causing drastic cell performance degradation and thereby limiting commercialization. In order to alleviate the Cr poisoning and achieve long-term high performance of SOFC stacks, various Al2O3-forming austenitic (AFA) stainless steels applied at different temperatures are evaluated in this project. Based on our Phase I results (500 h operation), it is shown that on the AFAs, an alumina-based protective layer forms under high temperature that is invulnerable to water vapor effects and suppresses the diffusion of chromium and manganese which can prevent the generation of spinels on the alloy surface. Therefore, 310S, OC4 and OC5 at 800 °C and 625, OC11 and OC11LZ at 900 °C are selected to be tested in the Phase II long-term operation. From the results, we find that besides the lower Cr evaporation rates and better oxidation resistance of AFAs than benchmark alloys after short-term (500 h) operation, AFAs also possess the sturdy and compact alumina layer after a long-term operation (5000 h). A protective oxide layer is of great importance for the long-term high-temperature operation of structural materials. The high-temperature oxidation behavior of AFAs and commercial 310S and 625 alloys in Air + 10% H 2 O at 800 °C and 900 °C is systematically investigated. Severe breakaway oxidation and minor spallation are observed for the 310S and 625 after the long-term operation, while the AFAs show high oxidation resistance. It is found that the formation of a continuous alumina layer could greatly prevent the volatilization of chromium vapors. In addition, the corresponding evolving models are discussed. Chromium evaporation from BoP components in high-temperature environment could severely deteriorate the electrochemical performance of SOFC. Several methods were applied to evaluate the Cr evaporation rates of BoP after 500 h exposure at 800 °C to 900 °C in air with 10% H 2 O. An optimal method was designed to exclude the effect of silicon (Si) deposits from quartz tube and sodium (Na) deposits from the sodium carbonate on the oxidation process and the chemical interaction between Cr gaseous species and alumina tube which could provide further quantitative correlation of the evaporated Cr species quantities and degradation rates of SOFC. Based on the great performance of AFAs after long-term operation, AFAs are assembled with Anode-supported cells (ASC) to investigate the the Cr deposition of anode-supported cell under a constant current density of 0.5 A cm -2 at 800 °C with AFA alloys compared with commercial alloys. In addition, the anodic and cathodic processes are deconvoluted by distribution of relaxation times (DRT) method which are comprehensively discussed. It is found out that the voltage exhibited a slight decrease of 5.09 % and 1.54 % in the presence of OC11 and OC11LZA alloy, respectively. However, a considerable decrease of 22.14 % and 12.06 % was determined in the presence of 310S and 625 alloy, respectively. AFAs possessing the low-cost, low Cr evaporation rates and the high oxidation resistance will make it of great potential to replace the existing BoP components.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Fuel performance analysis of Cr-coated Zircaloy-4 cladding during a prototypical LOCA event using BISON

Here, deformation and failure of chromium (Cr) coated Zircaloy-4 (Zry-4) were studied in loss-of-coolant accident (LOCA) conditions using the BISON fuel performance code. The BISON validation model simulating Halden research reactor experiments was extended to include Cr coatings and higher rod internal pressures to simulate high-burnup fuel. The transient simulations show Cr coatings help relieve stress in the Zry-4 substrate during the transient, delaying the onset of high-temperature creep, which leads to ballooning and bursting of the cladding. A nominal Cr coating thickness of 30 µm delays clad failure by 26 seconds and increases the clad burst temperature by 40 K. A parametric study showed that time to failure and burst temperature both increase with coating thickness, and Cr-coated cladding offers burst resistance under a wide range of rod internal pressures simulating high-burnup fuel. Results indicate that a thin Cr coating provides resistance against ballooning and bursting of cladding during LOCA events.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Cr-Be Pushered Single Shell (PSS) Capsule Development

Pushered single shell (PSS) has emerged as an alternative platform of implosion to ease the stability issue at the ablation front. The design consists of a thin inner Be layer, a 50% Cr:Be plateau region, an S-curve gradient, a low Cr (1.5%) tamper layer, and followed by a pure Be outer layer. General Atomics has developed a way to fabricate the higher-Z Cr to lower-Z Be gradients on glow discharge polymer mandrels with a designed S-shape profile for optimal implosion stability using magnetron sputtering. Microstructure analysis of the gradient coating indicated that at lower Cr concentration a short order or amorphous structure was formed. Here, these fabricated PSS capsules were subsequently built into capsule fill tube assemblies, verified to be leak tight at both ambient and cryogenic conditions, and delivered to Lawrence Livermore National Laboratory for the shots. The capsule thermal stability was demonstrated by invariable Cr profiles before and after pyrolysis. However, cracking at inner Cr layers was observed, which has been attributed to thermal stress.

Capsule↗
DOE OSTI2025

Self‐Stabilized Heterometallic Pair Sites for Selective Ethanol Dehydrogenation on Pt–Cr–Ag Alloy Catalysts

Self‐stabilized, heterometallic pair‐sites can enable fine‐tuning of catalytic functionality while also mitigating dynamic structural changes that degrade catalytic performance. This study demonstrates the development and characterization of trimetallic Pt x Cr x Ag 1‐2x ( x ≤ 0.1) alloys with active Pt–Cr pair‐ensembles for non‐oxidative ethanol dehydrogenation, leveraging predictions that favorable bonding stabilizes Pt–Cr pairs diluted in Ag. Operando X‐ray absorption spectroscopy confirms the preferential formation and stability of Pt–Cr pairings dispersed throughout the Ag matrix, and ambient‐pressure X‐ray photoelectron spectroscopy shows that Pt–Cr sites have significant activity for ethanol dehydrogenation, while suppressing reaction processes that deactivate binary Pt–Ag and Cr–Ag alloys. This work demonstrates that stabilizing heterometallic pair sites within trimetallic alloys provides a new avenue for designing catalysts with discrete active sites that are durable and highly selective.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Kinetics of the Temperature-Dependent e aq - and ·OH Radical Reactions with Cr(III) Ions in Aqueous Solutions

The reactivity of chromium(III) species with the major oxidizing and reducing radiolysis products of water was investigated in aqueous solutions at temperatures up to 150 °C. The reaction between the hydrated electron (e aq - ) and Cr(III) species showed a positive temperature dependence over this temperature range. The reaction was also studied in pH 2.5 and 3.5 solutions for the first time. This work also studied the reaction between acidic Cr(III) species and the hydroxyl radical (·OH). It was found that Cr 3+ did not react significantly with the ·OH radical, but the first hydrolysis species, Cr(OH) 2+ , did with a rate coefficient of k= (7.2±0.3)×10 8 M -1 s -1 at 25 °C. The oxidation of Cr(OH) 2+ by the ·OH radical formed an absorbing product species that ultimately oxidized to give Cr(VI). In conclusion, these newly measured reaction rates allow for the development of improved models of aqueous chromium speciation for the effective remediation of liquid high-level nuclear waste via vitrification processes.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

First-principles and cluster expansion study of the effect of magnetism on short-range order in Fe–Ni–Cr austenitic stainless steels

Short-range order (SRO), the regular and predictable arrangement of atoms over short distances, alters the mechanical properties of technologically relevant structural materials such as medium/high entropy alloys and austenitic stainless steels. In this study, we present a generalized spin cluster expansion (CE) model and show that magnetism is a primary factor influencing the level of SRO present in austenitic Fe-Ni-Cr alloys. The spin CE consists of a chemical cluster expansion combined with an Ising model for Fe-Ni-Cr austenitic alloys. It explicitly accounts for local magnetic exchange interactions, thereby capturing the effects of finite temperature magnetism on SRO. Model parameters are obtained by fitting to a first-principles data set comprising both chemically and magnetically diverse FCC configurations. The magnitude of the magnetic exchange interactions are found to be comparable to the chemical interactions. Compared to a conventional implicit magnetism CE built from only magnetic ground state configurations, the spin CE shows improved performance on several experimental benchmarks over a broad spectrum of compositions, particularly at higher temperatures due to the explicit treatment of magnetic disorder. We find that SRO is strongly influenced by alloy Cr content, since Cr atoms prefer to align antiferromagnetically with nearest neighbors but become magnetically frustrated with increasing Cr concentration. Using the spin CE, we predict that increasing the Cr concentration in typical austenitic stainless steels promotes the formation of SRO and increases order-disorder transition temperatures. Furthermore, this study underscores the significance of considering magnetic interactions explicitly when exploring the thermodynamic properties of complex transition metal alloys. It also highlights guidelines for customizing SRO through adjustments of alloy composition.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ab-initio investigation of the effect of adsorbed salts on segregation of Cr at the Ni (100) surface

The dissolution and depletion of chromium (Cr) in salt facing nickel (Ni) alloy surfaces is one of the predominant degradation mechanisms of structural components in molten salt technology. Here, we use density functional theory to investigate the role of electronic level interactions that may underlie the depletion phenomenon of Cr in a Ni (100) surface exposed to various adsorbed salt species. Our results show that, under vacuum, Ni preferentially segregates to the surface layer. Conversely, in the presence of adsorbed anionic salt species (e.g., chlorine (Cl), fluorine (F) or the impurity oxygen (O)) Cr segregation becomes more favorable. In these cases, Cl has the weakest effect on segregation, while O has the strongest effect. Our analysis reveals the strong correlation between Cr segregation and the amount of valence charge transferred between the Cr atom and surface adsorbate: the greater the charge transfer, the lower the segregation energy. We also show that, when considered, secondary cations screen Cr-anion interactions, which in turn reduce the magnitude of the anions effect on segregation. These results shed light on the role of salt impurities likely play in the overall corrosion phenomena in molten salt environments. This work provides insights into the atomic level interactions fundamental to molten salt corrosion and on the importance of maintaining salt purity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Phase stabilization and oxidation of a continuous composition spread multi-principal element (AlFeNiTiVZr) 1-x Cr x alloy

Multi-Principal Element Alloys (MPEA) have been hypothesized to maintain a stable single alloy phase and resist corrosion at high temperatures, which are desirable in various functional applications, including material of turbine blades. However, studies into oxidation resistant alloys have been constrained to individual MPEA systems or a limited selection of compositions within those systems. Here, High-Throughput Experimental (HTE) techniques were utilized to rapidly assess phase stability and resistance to oxidation of an (AlFeNiTiVZr) 1-x Cr x continuous composition spread (CCS) thin-film alloy system. High-throughput synchrotron diffraction and Raman spectroscopy were used to identify phases, especially high symmetry structures and oxides, as a function of annealing time and composition. The formation of two distinct phase regions, R 1 and R 2 , across the CCS was observed. One of these phase regions, R 2 , exhibited a stable high symmetry BCC-like phase at Cr concentrations greater than 25.4 at%, and grew a passivating mixed metal surface oxide; whereas, the R 1 phase region, decomposed on oxidation to multiple oxides and reacted with the substrate to form silicides. The passivating mixed metal oxide layer appears to prevent destabilization of the (AlFeNiTiVZr) 1-x Cr x MPEA BCC solid solution. Furthermore, at longer annealing times the passivating phase was seen only above 29.2 at% Cr. High Cr-doped (AlFeNiTiVZr) 1-x Cr x appear to be a good candidate for high temperature, oxidation-resistant structural alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The S solubility of Cr and Al containing simulated low-activity waste glass

Here, the presence of sulfur-containing molten salt phases during vitrification is a particular problem which can be detrimental to the melter. Borosilicate compositions were designed to explore both the effects of a fixed amount of Cr, as Cr 2 O 3 or Na 2 CrO 4 , and the impact of Al 2 O 3 , on sulfur solubility as determined by progressively adding elemental S. The NABS series (with Al 2 O 3 ) has a higher SO 3 solubility of ~3.5 mol% while the NBS series (without Al 2 O 3 ) has a SO 3 solubility of ~2 mol%. Crystalline Cr 2 O 3 formed in the NABS series upon the addition of S but is not present in the NBS series. At the highest S addition, a separate salt phase always forms, and was identified as Na 2 (S,Cr)O 4 via electron dispersive spectroscopy, ultraviolet-visible spectroscopy, x-ray diffraction, and thermal analysis. Magic angle spinning nuclear magnetic resonance identified no change in the B coordination in either series as S is added, suggesting that the Na is scavenged from other locations, such as the Si sites, to charge compensate sulfate, whether in the glass or in the salt. The Cr precursor identity did not affect the observed overall behavior regarding sulfur, but did impact Cr redox as identified with Raman spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Diffusion in undoped and Cr-doped amorphous UO 2

UO 2 fuel pellets are often doped with chromium oxide to obtain favourable properties such as higher density, improved thermal stability, large grain sizes, improved pellet-clad interaction margins, and increased fission gas retention during transients. Chromium has a low solubility limit in UO 2 , with past experimental work reporting solubility limits ranging between 0.004 to 0.06 wt.% Cr. Due to its low solubility, segregation of Cr ions to the grain boundary may occur. Further, the complexity of these boundaries may be high as observed in other ceramics resulting in disordered or amorphous regions along the boundary, affecting a range of material and operational properties of the fuel pellet. To assess these disordered regions, in this work we study amorphous undoped and Cr doped UO 2 systems (containing 10–50 at.% Cr 3+ ) that have been modelled using classical molecular dynamics methods incorporating Cr 3+ into the well-used CRG potential library. Diffusion coefficients, pre-exponential factors, and activation energies for diffusion were computed for oxygen ions, assessing the impact of structure and extrinsic species on migration. Oxygen diffusion was observed to be much faster in the undoped amorphous system compared to its crystalline counterpart. Oxygen diffusion in doped systems decreased with increasing Cr concentration, highlighting the importance of additives to retain fission products and other migratory species.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Selective Oxidation and Cr Segregation in High-Entropy Oxide Thin Films

High-entropy oxides (HEOs) offer exceptional compositional flexibility and structural stability, making them promising materials for energy and catalytic applications. Here, in this study, we investigate Sr doping effects on B-site cation oxidation states, local composition, and structure in epitaxial La 1–x Sr x (Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 thin films. X-ray spectroscopies reveal that Sr doping preferentially promotes Cr oxidation from Cr 3+ to Cr 6+ , partially oxidizes Co and Ni, while leaving Mn 4+ and Fe 3+ unchanged. Atomic-resolution scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy shows pronounced Cr segregation, with depletion at the interface and enrichment at the surface, along with partial amorphization in heavily Sr-doped samples. This segregation is likely driven by oxidation-induced migration of smaller, high-valence Cr cations during growth. These findings highlight the critical interplay between charge compensation, local strain, and compositional fluctuations in HEOs, indicating that precise control over growth conditions is critical for tuning their surface composition and electronic structure toward more robust electrocatalyst design.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Percolative phase transition in few-layered MoSe 2 field-effect transistors using Co and Cr contacts

The metal-to-insulator phase transition (MIT) in two-dimensional (2D) materials under the influence of a gating electric field has revealed interesting electronic behavior and the need for a deeper fundamental understanding of electron transport processes, while attracting much interest in the development of next-generation electronic and optoelectronic devices. Although the mechanism of the MIT in 2D semiconductors is a topic under debate in condensed matter physics, our work demonstrates the tunable percolative phase transition in few-layered MoSe 2 field-effect transistors (FETs) using different metallic contact materials. Here, we attempted to understand the MIT through temperature-dependent electronic transport measurements by tuning the carrier density in a MoSe 2 channel under the influence of an applied gate voltage. In particular, we have examined this phenomenon using the conventional chromium (Cr) and ferromagnetic cobalt (Co) as two metal contacts. For both Cr and Co, our devices demonstrated n-type behavior with a room-temperature field-effect mobility of 16 cm 2 V −1 s −1 for the device with Cr-contacts and 92 cm 2 V −1 s −1 for the device with Co-contacts, respectively. Further, with low temperature measurements at 50 K, the mobilities increased significantly to 65 cm 2 V −1 s −1 for the device with Cr and 394 cm 2 V −1 s −1 for the device with Co-contacts. By fitting our experimental data to the percolative phase transition theory, the temperature-dependent conductivity data show a transition from an insulating-to-metallic behavior at a bias of ∼28 V for Cr-contacts and ∼20 V for Co-contacts. This cross-over of the conductivity can be attributed to an increase in carrier density as a function of the gate bias in temperature-dependent transfer characteristics. By extracting the critical exponents, we find that the transport behavior in the device with Co-contacts aligns closely with the 2D percolation theory. In contrast, the devices with Cr-contacts deviate significantly from the 2D limit at low temperatures.

36 MATERIALS SCIENCE↗