SEARCH · Engineering Papers

Results for “Computational Fluid Dynamics (CFD)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2024

CFD Modeling of High-Flux Plate-and-Frame Membrane Modules for Industrial Carbon Capture

In this work, we explore the use of CO2-selective flat sheet membranes for capturing CO2 from point sources. We employ Computational Fluid Dynamics (CFD) models to design high-flux plate-and-frame membrane modules to achieve uniform flow distribution among membrane elements, minimize dead-end zones, and ease the common concentration polarization issue for gas separation membranes. The goal is to drive membrane technology improvements by providing better module designs for given membrane properties and operating conditions.

Dosso, Cheick↗

DOE OSTI2024

CFD modeling of high-flux plate-and-frame membrane modules for industrial carbon capture

Dosso, Cheick↗

DOE OSTI2020

Numerical study of advanced compression ignition and combustion in a gasoline direct injection engine

Multi-mode combustion strategies may provide a considerable thermal efficiency improvement targeted at part-load operating conditions for light-duty spark-ignition (SI) engines. The extension from boosted SI mode at high loads to advanced compression ignition (ACI) mode at low loads can be achieved by increasing compression ratio and utilizing intake air heating. In order to enable an accurate control of intake charge condition for ACI control and rapid mode-switches, it is essential to gain fundamental insight into the autoignition process with regard to thermal and fuel-air mixture stratification in the combustion chamber. In this work, a computational fluid dynamics (CFD) study is carried out to reveal some degrees of correlation between the mixture and thermal stratifications induced by the cylinder wall temperature and combustion-phasing across varying engine load conditions. The computational analysis begins with a calibrated simulation setup best matching the engine experiments, and subsequently evaluates the baseline setup for an extended range of engine load conditions for two excess-air ratio cases. The present study emphasizes the dominance of thermal stratifications for autoignition process due to wall temperature effects depending on the engine load conditions of interest. In addition, this study also aims to provide insight into the impact of mixture stratification on cyclic variability, especially at colder wall engine conditions (e.g., cold start). Observations herein provide highlight of the propensity of autoignition in correlation with mixture reactivity space.

Advanced Compression Ignition (ACI) engine↗

DOE OSTI2024

Computational Analysis of Hydraulic Efficiency of Michigan DOT Cover C

Drainage structures are used to capture stormwater runoff in streets and highways in urban environments. These drainage structures, which typically consist of catch basins with grates, inlets, or combination grates/inlets, collect stormwater runoff and discharge through buried conveyance systems. They are strategically placed for public safety in curb and gutter systems to provide efficient drainage of water from roadways and thus reduce the risk of hydroplaning. The performance of drainage structures is measured in terms of hydraulic efficiency, which is defined as the percentage of flow captured by the basin as compared to the total flow drainage to the structure. Understanding of the performance of these drainage structures helps designers properly space inlets to promote an economic design that ensures the safety of the traveling public. The current design methodology used to determine drainage structure follows guidelines established in the current Michigan Department of Transportation (MDOT) Drainage Manual (2006). The guidelines in the MDOT Drainage Manual were modeled after the Federal Highway Administration’s (FHWA) Hydraulic Engineering Circular 22 “Urban Drainage Design” (HEC-22). HEC-22 includes empirically derived equations to calculate the interception capacity of drainage structures for several commonly used grate configurations, such as the parallel bar, curved vane and tilt bar grates, which are based on a research study performed by Burgi et al. in the 1970s. MDOT uses several drainage structures to capture runoff that are detailed as Standard Plans. Many of these drainage structures utilize sinusoidal type grates that are not described in HEC-22. Physical modeling of these structures has been limited, posing the need to have them analyzed to verify their capture efficiency. Current MDOT practice is to assume a similar sized reticuline grate, as described in HEC-22, for capture efficiencies. Until recently, evaluating the hydraulic performance of drainage structures was limited to physical modeling in a hydraulics laboratory. With advances in engineering software and computing power, computational fluid dynamics (CFD) modeling has become a more cost-effective alternative. The Federal Highway Administration (FHWA) provides states the option to evaluate their drainage structures using CFD through the Transportation Pooled Fund Program. This study, “Computational Analysis of Hydraulic Efficiency of Michigan DOT Cover C,” was carried out using the pooled fund. MDOT’s Cover C was chosen as the first test candidate, given its similar sinusoidal pattern to other MDOT grates, but it is typically used for high-volume, higher speed applications. A similar version, Cover CX, is used on interstate highways but does not have traverse bars for bicycle safety. Additional grates may be considered for evaluation in the future.

42 ENGINEERING↗

DOE OSTI2021

Computational Fluid Dynamics Combustion Modeling for Rotating Detonation Engines

This paper focuses on the development and validation of a combustion model for Computational Fluid Dynamics (CFD) modeling of Rotating Detonation Engines. A zero-dimensional Partially Stirred Reactor (PaSR) with a detailed chemical kinetic mechanism for hydrogen and air is used to model turbulent combustion. The model is computationally efficient and is based on the notion of partial mixing at the sub-grid level with turbulent exchange between mixed and unmixed regions. The ability of the PaSR model to accurately represent both detonative and deflagrative combustion is assessed by validating the results against experimental data. The effects of mesh resolution on the solution are also studied in order to determine if a mesh independent solution is obtainable with the Large Eddy Simulation (LES) approach to modeling turbulence. A comparison is made between the PaSR model and simply ignoring turbulence chemistry interactions which assumes that all species are perfectly mixed at the sub-grid level.

Strakey, Peter↗

DOE OSTI2023

Virtual Engineering Software Framework for Integrated Biomass Conversion Modeling

This presentation covers the design and implementation of a software tool to systematically connect computational models of unit operations to simulate an integrated process of low-temperature conversion of biomass to fuel. This virtual engineering (VE) software was designed with the overarching goal of connecting unit models written in various programming languages and requiring different computational resources within a single, flexible framework. The models and features currently considered for the VE library include mechanistic models for pretreatment, enzymatic hydrolysis, and aerobic bioreaction; high-fidelity computational fluid dynamics (CFD) simulations for enzymatic hydrolysis and aerobic bioreaction; and the capability to perform techno-economic analyses (TEA) using Aspen Plus, a commercial software package. The CFD models require access to high-performance computing (HPC) resources, so in addition to handling multiple programming languages and interfaces, the VE software must also be capable of interacting with an HPC scheduler to submit, run, and post-process jobs. Using the Python programming language, a new VE software package has been developed that contains functionality to manage the input-output communication between various unit models, schedule simulations to run on NREL's HPC and analyze those results, and interface with existing TEA software workflows. A Jupyter-notebook GUI was also created to solicit user input and provide documentation. In cases where multiple models for a particular unit-operation exist, selection between models is accomplished through a simple checkbox, with the appropriate inputs and outputs being parsed and converted seamlessly in the background. Each operation makes use of a different programming language, but the flow of information from pretreatment to enzymatic hydrolysis to bioreaction is managed with an intuitive, centralized file-communication strategy. In this talk, the programming approach and implementation details of the notebook are presented for multiple possibilities of the conversion process, including a demonstration of the ability to manage HPC resources. Additionally, an example of a sensitivity study of treatment parameters governing the overall conversion outcome is shown which highlights the ease of defining new problems using the VE Notebook workflow and leads into a discussion of ongoing work to enable outer-loop optimization studies.

biofuel↗

DOE OSTI2023

CFD Simulation of the Dosing Behavior within the Atomic Layer Deposition Feeding System

The effective operation of atomic layer deposition (ALD) feeding system is the premise of realizing specific ALD processes. In the present work, a detailed computational fluid dynamics (CFD) model of the feeding system has been developed and validated, which accounts for the roles of ALD valves and manifolds. A numerical simulation of the compressible fluid flow and heat/mass transfer within the feeding system was conducted. The dosing amounts and the spatiotemporal distributions of the precursors can be accurately predicted using the CFD model, as validated by experimental results. Different precursors, operating conditions, and structures of the feeding system were simulated and analyzed to examine the operating flexibility of the feeding system. The simulation results can be adopted as the upstream boundary conditions for simulations of the ALD process in the reaction chamber. The substrate-scale simulation indicates that the effect of the feeding system on the film deposition is highly related to the surface kinetics of ALD. The present work can serve as a guide for the development and optimization of different ALD-based processes via proper operation and even the design of the feeding system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Three-Dimensional CFD Analysis of Construction Design Alternatives for an ERDC Coastal and Hydraulics Laboratory Flow Accelerator

The U.S. Army Engineer Research and Development Center, ERDC, Coastal and Hydraulics Laboratory in Vicksburg Mississippi is planning to build a large flume with a 10-foot-wide flow channel. Three-dimensional Computational Fluid Dynamics (CFD) analysis was used in the design of the flume entry and flow accelerator sections that feed into the 10-foot-wide channel. The design is based on the plans of the existing fiberglass flume inlet at the Turner-Fairbank Highway Research Center (TFHRC) J. Sterling Jones Hydraulics Research Laboratory in McLean Virginia. The TFHRC flume inlet feeds water to a 6-foot-wide flume channel, and therefore a scale up factor of 10/6 in the width of the inlet section of the TFHRC flume would meet the width requirement of the ERDC flume channel. The CFD analysis was performed using STAR-CCM+ commercial CFD software. Additional analysis was done with the open-source CFD software, OpenFOAM, to cross-check the analysis of one of the cases with a code-to-code comparison.

42 ENGINEERING↗

DOE OSTI2022

Multi-scale and multi-physics analysis, design optimization, and experimental validation of heat exchangers utilizing high performance, non-round tubes

Air-to-refrigerant heat exchangers (HXs) are fundamental components in HVAC&R systems, and considerable research has been dedicated designing continually smaller, lighter, and more efficient HX designs. In recent years, researchers have leveraged advancements in Computational Fluid Dynamics (CFD), Finite Element Analysis (FEA), and optimization algorithms to consider primary tube shape and topology optimization to design highly compact, high performance HXs for a multitude of applications. In this research, we present a computationally efficient, comprehensive, multi-scale, and multi-physics analysis and optimization method for air-to-refrigerant HXs featuring automated CFD and FEA simulations and approximation-assisted optimization. This methodology was utilized to design HXs with shape-optimized, non-round tubes which outperform current state-of-the-art tube-fin HXs without compromising structural integrity. The optimal HXs were shown to deliver similar thermal performance to the baseline HXs while also achieving more than 20% reductions in airside pressure drop and core envelope volume and more than 30% reduction in internal volume. Comprehensive experimental validation of the optimization methodology was conducted through the testing of two prototypes in a standardized wind tunnel facility under multiple operating conditions. For prototype #1 under dry evaporator conditions, the predicted heat load agreed within ± 10% of measured values and the predicted airside pressure drop agreed within ± 30%, while for dehumidifying conditions, the predicted sensible and latent heat loads agreed within ± 10% and ± 20% of the measured values, respectively. For prototype #2, the predicted condenser heat load agreed within ± 3.0% of measured values, and the predicted airside pressure drop agreed within ± 27%. The acceptable agreement between simulation and experimental results for the present application highlights the flexibility of the novel optimization methodology to design next generation HXs with improved performance and reduced volume, weight, and environmental impact.

42 ENGINEERING↗

DOE OSTI2023

Efficient GPU Implementation of Automatic Differentiation for Computational Fluid Dynamics

Many scientific and engineering applications require repeated calculations of derivatives of output functions with respect to input parameters. Automatic Differentiation (AD) is a method that automates derivative calculations and can significantly speed up code development. In Computational Fluid Dynamics (CFD), derivatives of flux functions with respect to state variables (Jacobian) are needed for efficient solutions of the nonlinear governing equations. AD of flux functions on graphics processing units (GPUs) is challenging as flux computations involve many intermediate variables that create high register pressure and require significant memory traffic because of the need to store the derivatives. This paper presents a forward-mode AD method based on multivariate dual numbers that addresses these challenges and simultaneously reduces the floating-point operation count. The dimension of the multivariate dual numbers is optimized for performance. The flux computations are restructured to minimize the number of temporary variables and reduce register pressure. For effective utilization of memory bandwidth, shared memory is used to store the local flux Jacobian. This AD implementation is compared with several other Jacobian implementations on an NVIDIA V100 GPU (V100). For three-dimensional perfect-gas compressible-flow equations implemented in a practical CFD code, the AD implementation of a flux Jacobian based on multivariate dual numbers of dimension 5 outperforms all other GPU AD implementations on V100. Its performance is comparable with the optimized hand-differentiated version. Finally, the implementation achieves 75% of the peak floating-point throughput and 61 % of the peak global device memory bandwidth usage.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

Comparative study of machine learning techniques for post-combustion carbon capture systems

Computational analysis of countercurrent flows in packed absorption columns, often used in solvent-based post-combustion carbon capture systems (CCSs), is challenging. Typically, computational fluid dynamics (CFD) approaches are used to simulate the interactions between a solvent, gas, and column's packing geometry while accounting for the thermodynamics, kinetics, heat, and mass transfer effects of the absorption process. These simulations can then be used explain a column's hydrodynamic characteristics and evaluate its CO 2 -capture efficiency. However, these approaches are computationally expensive, making it difficult to evaluate numerous designs and operating conditions to improve efficiency at industrial scales. In this work, we comprehensively explore the application of statistical ML methods, convolutional neural networks (CNNs), and graph neural networks (GNNs) to aid and accelerate the scale-up and design optimization of solvent-based post-combustion CCSs. We apply these methods to CFD datasets of countercurrent flows in absorption columns with structured packings characterized by several geometric parameters. We train models to use these parameters, inlet velocity conditions, and other model-specific representations of the column to estimate key determinants of CO 2 -capture efficiency without having to simulate additional CFD datasets. We also evaluate the impact of different input types on the accuracy and generalizability of each model. We discuss the strengths and limitations of each approach to further elucidate the role of CNNs, GNNs, and other machine learning approaches for CO 2 -capture property prediction and design optimization.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2026

Reduced-Order CFD Modeling to Support Waste Loading Optimization in Hanford WTP Vitrification

The U.S. DOE Hanford Site stores over 56 million gallons of radioactive liquid tank waste that must be treated and immobilized for long-term disposal The Waste Treatment and Immobilization Plant (WTP) will vitrify this waste by feeding it into Joule-heated melters, where it is incorporated into a stable borosilicate glass Computational fluid dynamics (CFD) simulations of glass melters can provide insight into the maximum achievable waste loading under varying melter operating conditions Fully resolved VOF multiphase simulations were used as the reference model to capture bubble-driven convection in the melter, including bubble formation, rise behavior, and induced glass melt circulation Effective bubble column diameter and rise velocity were extracted from the resolved simulations, compared with empirical correlations, and refit across relevant viscosity and gas flow rate conditions Explicit gas–liquid interface tracking was replaced with a single-phase momentum source term model, enabling faster steady-state CFD simulations while preserving the dominant hydrodynamic effects of bubbling New empirical correlations were developed for effective bubble column diameter and bubble rise velocity by fitting resolved simulation data across expected melter viscosity and gas flow rate ranges, providing improved inputs for the momentum source term model compared with existing literature correlations The momentum source term model reduced fluid-domain mesh size by 89% and achieved an 8.4× computational speedup relative to resolved bubbling simulations The validated momentum source term approach enables prediction of process-relevant heat transfer behavior in the integrated melter model, including heat transfer from the molten glass to the cold cap, plenum, refractory walls, and surrounding structural regions under varying melter operating conditions

12 - MGMT OF RADIOACTIVE AND NON-RADIOACTIVE WASTE↗

DOE OSTI2026

Glovebox CFD Analysis: Low-Flow, Laminar CFD Analysis of Glovebox Ventilation and Humidity Transport in Ansys Fluent 2025 R1

There are gloveboxes that frequently exceed the 30% relative humidity level required for operations. These exceedances result in alternative operations needing to be utilized. This report documents a computational fluid dynamics (CFD) analysis performed to characterize airflow and humidity transport within a representative glovebox under nominal, low-flow conditions. The analysis focuses on establishing the flow regime, identifying transport-limited regions, and evaluating the implications of laminar flow on humidity removal. A single-phase, laminar flow model with a species transport model was used to represent air and water vapor mixing. Results demonstrate that, at the nominal flow rates, airflow is laminar with weak mixing, which will result in long residence times, tens of minutes long or more, in low-velocity regions. These conclusions suggests that humidity reduction is transport-limited. This analysis provides qualitative insight into airflow structure and humidity transport trends. In addition to characterization of glovebox airflow and humidity transport, results are intended to inform experimental validation and future transient modeling efforts.

42 ENGINEERING↗

DOE OSTI2026

CFD-Enhanced Calibration of a Multihole Probe for Small Uncrewed Aircraft Systems

A robust calibration method with a 9-hole probe (9HP) for inertial wind vector measurements from a small uncrewed aircraft system (sUAS) is presented. Calibration accuracy is improved by using computational fluid dynamics (CFD) to estimate corrections, such as those for test section blockage, that are generally applied in wind tunnel testing. A method for estimating experimental bias is presented to account for flow variations over the pressure taps as the 9HP is repositioned in the test section. Installation effects from flow over the airframe and upwash produced by the wings are estimated from CFD simulations of the entire airframe at the expected cruise speed. An initial CFD analysis has demonstrated a quantifiable linear relationship between the measured and actual angle of attack as measured from the relative wind frame. In conclusion, the objective of these additional steps is to increase the accuracy of 9HP calibration.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Feasibility of full-core pin resolved CFD simulations of small modular reactor with momentum sources

Complex flow structure interactions and heat transfer processes take place in nuclear reactor cores. Given the extreme pressure/temperature and radioactive conditions inside the core, numerical simulations offer an attractive and sometimes more feasible approach to study the related flow and heat transfer phenomena in addition to the experiments. Under the Exascale Computing Project, the full-core simulation of a small modular reactor (SMR) has been pursued coupling Computational Fluid Dynamics (CFD) and neutronics. A key aspect of the modeling of SMR fuel assemblies is the presence of spacer grids and the mixing promoted by mixing vanes or the equivalent. A reduced order methodology is adopted based on momentum sources to mimic the mixing of the vanes. The momentum sources have been carefully calibrated with detailed Large Eddy Simulations (LES) of spacer grids performed with Nek5000. Modeling the spacer grid and mixing vanes (SGMV) effect without body-fitted computational grid avoids the excessive costs in resolving the local geometric details, and thus supports the simulation to be scaled up to the full core. Besides the progress on momentum source modeling, this paper also features the first full-core pin resolved CFD simulation ever performed to the authors' knowledge. This represents a significant advancement in capability for the CFD of nuclear reactors, which will hopefully serve as an inspiration for further integrating high-fidelity numerical simulations in actual engineering designs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2021

Deterministic Calibration of MFiX-PIC, Part 1: Settling Bed

The Particle-in-cell (PIC) numerical approach for modeling granular solids in fluid flow has gained significant interest in recent years. Valued for its often shorter time-to-solution, the PIC formulation relies on modeling statistical groupings of particles called parcels in cooperation with a solids stress model to affect local solids velocity. This is in contrast to the discrete element model (DEM) where every particle in a system is modelled individually and directly coupled to local solids velocity through Newtonian mechanics. The U.S. Department of Energy (DOE), National Energy Technology Laboratory (NETL) develops and maintains Multiphase Flow with Interphase eXchanges (MFiX), a collection of open-source computational fluid dynamics (CFD) solvers. Included in the MFiX suite are traditional two-fluid model (TFM) and DEM solvers, and a recently added PIC solver (NETL, 2021). In general, PIC methodologies offer an accuracy trade-off in lieu of computational speed; and therefore, it is important to assess the credibility of MFiX-PIC simulations. For this purpose, a systematic verification, validation and uncertainty quantification (VVUQ) effort was initiated at NETL to assess the new PIC solver

42 ENGINEERING↗

DOE OSTI2021

EGR Dilution and Fuel Property Effects on High-Efficiency Spark-Ignition Flames

Modern spark ignition internal combustion engines rely on fast combustion rates and high dilution to achieve high brake thermal efficiencies. To accomplish this, new engine designs have moved towards increased tumble ratios and stroke-to-bore ratios. Increased tumble ratios correlate positively with increases in turbulent kinetic energy and improved fuel and residual gas mixing, all of which favor faster and more efficient combustion. Longer stroke-to-bore ratios allow higher geometric compression ratios and use of late intake valve closing to control peak compression pressures and temperatures. The addition of dilution to improve efficiency is limited by the resulting increase in combustion instabilities manifested by cycle-to-cycle variability. A number of effects - preferential diffusion, turbulence-combustion interactions, stochastic flow patterns, laminar-turbulent flame kernel transitions, and relative length and velocity scales between flame and turbulence - are believed to be responsible for the increase in cycle-to-cycle variations, where their contributions are likely interlinked. Several studies have shown the influence of stochastic flow characteristics on the nature of combustion instabilities, such as velocity patterns on flame kernel formation and cycle-to-cycle variations in residual gas. However, few have focused on the specific effects of fuel properties. The objective of this work is to contrast the effects of dilution on propane stoichiometric combustion against gasoline. Dilution tolerance experiments were conducted in a purpose-built high stroke-to-bore ratio single cylinder engine with both gasoline and LPG. Three-dimensional full cycle computational fluid dynamics (CFD) simulations employing a level-set combustion approach and Reynolds averaged Navier-Stokes (RANS) turbulence modeling was used to qualitatively assess the changes in length and velocity scales for turbulence and the flame. The experimental results showed that LPG can tolerate higher exhaust gas recirculation (EGR) dilution under a variety of conditions. Analysis of CFD simulations showed that propane flames are likely less sensitive to influences from the flow field due to less thickening of the flame and higher effective flame speeds.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2021

Accelerate Nuclear Research and Development by Reducing Time and Cost Spend in the Pre-conceptual Design Phase of Advanced Reactor Experiments

The design process of every new concept, such as advanced nuclear reactors or associated experiments, starts with the pre-conceptual design phase. In this phase, the viability of a wide range of design options needs to be assessed quickly, to understand the operating envelope and its feasibility. A variety of physics models (thermal-hydraulics, neutronics, mechanical design, etc.) has to be considered at this very first design stage and optimum component sizes and materials (e.g. heat exchangers, piping, turbomachinery, coolant type, etc.) have to be chosen for a given set of boundary conditions (e.g. heat source, heat sink, flow rate, etc.). Detailed solutions such as provided by high fidelity methods like computational fluid dynamics (CFD), Monte Carlo methods, etc. and even lower fidelity tools such as system or subchannel codes, etc. are usually not used during the pre-conceptual design due to the relatively long time needed to create input models, the computational time to obtain a solution and the lack of flexibility to quickly investigate different combinations of components, individual component sizes and material properties. High fidelity tools are usually only employed in the conceptual design and later phases once a base concept has been identified during the pre-conceptual design stage. The current practice during the pre-conceptual design stage is that analysts collect the needed equations, material properties, closure laws, etc. and create ad-hoc solutions form scratch for every new problem. There clearly is a lack of a flexible scoping tool that can be used during pre-conceptional design before higher fidelity tools (as described above) come into play. To reduce user errors in ad-hoc solutions and increase fidelity and efficiency, this project aims to investigate and develop a user-friendly scoping tool to address the thermal-hydraulic designing needs during preconceptual experiment design, i.e. Thermal-hydraulic Research Universal Scoping Tool (TRUST). The success of TRUST will provide the nuclear engineers with an easy-to-use and affordable calculator for early reactor system design and optimization.

42 ENGINEERING↗