Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Compiler techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Prediction of Business Jet Airloads Using The Overflow Navier-Stokes Code

The objective of this work is to evaluate the application of Navier-Stokes computational fluid dynamics technology, for the purpose of predicting off-design condition airloads on a business jet configuration in the transonic regime. The NASA Navier-Stokes flow solver OVERFLOW with Chimera overset grid capability, availability of several numerical schemes and convergence acceleration techniques was selected for this work. A set of scripts which have been compiled to reduce the time required for the grid generation process are described. Several turbulence models are evaluated in the presence of separated flow regions on the wing. Computed results are compared to available wind tunnel data for two Mach numbers and a range of angles-of-attack. Comparisons of wing surface pressure from numerical simulation and wind tunnel measurements show good agreement up to fairly high angles-of-attack.

Bounajem, Elias↗

A study of numerical methods of solution of the equations of motion of a controlled satellite under the influence of gravity gradient torque

Numerical methods of integration of the equations of motion of a controlled satellite under the influence of gravity-gradient torque are considered. The results of computer experimentation using a number of Runge-Kutta, multi-step, and extrapolation methods for the numerical integration of this differential system are presented, and particularly efficient methods are noted. A large bibliography of numerical methods for initial value problems for ordinary differential equations is presented, and a compilation of Runge-Kutta and multistep formulas is given. Less common numerical integration techniques from the literature are noted for further consideration.

Thompson, J. F.↗

Ages of flow units in the lunar nearside maria based on Lunar Orbiter IV photographs

A map dividing the lunar nearside maria into six units each of uniform age was compiled from Lunar Orbiter IV photographs. Relative ages were determined using a crater morphology technique. Relative ages were then converted to absolute ages by comparison to a curve calibrated from Apollo and Luna sample data; three of the six units, including the two youngest (about 3.1 and 2.6 b.y. old), were not sampled by Apollo or Luna. Vast regions in the western maria are covered by these young flows. The old flows (about 3.75 b.y. in age) are found to occur mostly in the eastern maria. A comparison of the age units derived from these data with those units derived from other remote-sensing data provide good agreement in the location of unit boundaries. These data also indicate that the emplacement history of mare basalt types is more complex than was earlier thought.

Boyce, J. M.↗

Second catalog of interferometric measurements of binary stars (McAlister and Hartkopf 1988): Documentation for the machine-readable version

The machine-readable version of the catalog, as it is currently being distributed from the Astronomical Data Center, is described. The catalog is a compilation of measurements of binary- and multiple-star systems obtained by speckle interferometric techniques; this version supersedes a previous edition of the catalog published in 1985. Stars that have been examined for multiplicity with negative results are included, in which case upper limits for the separation are given. The second version is expanded from the first in that a file of newly resolved systems and six cross-index files of alternate designations are included. The data file contains alternate identifications for the observed systems, epochs of observation, reported errors in position angles and separation, and bibliographical references.

Warren, Wayne H., Jr.↗

Survey of emission-line galaxies: Universidad Complutense de Madrid list

A low-dispersion objective-prism survey for low-redshift emission-line galaxies (ELGs) is being carried out by the University Complutense de Madrid with the Schmidt telescope at the German-Spanish Observatory of Calar Alto (Almeria, Spain). A 4 deg full aperture prism, which provides a dispersion of 1950 A/mm, and IIIaF emulsion combination has been used to search for ELGs selected by the presence of H-alpha emission in their spectra. Our survey has proved to be able to recover objects already found by similar surveys with different techniques and, what is more important, to discover new objects not previously cataloged. A compilation of descriptions and positions, along with finding charts when necessary, is presented for 160 extragalactic emission-line objects. This is the first list, which contains objects located in a region of the sky covering 270 sq deg in 10 fields near alpha = 0(sup h) and delta = 20 deg.

Zamorano, J.↗

A Flexible and Non-instrusive Approach for Computing Complex Structural Coverage Metrics

Software analysis tools and techniques often leverage structural code coverage information to reason about the dynamic behavior of software. Existing techniques instrument the code with the required structural obligations and then monitor the execution of the compiled code to report coverage. Instrumentation based approaches often incur considerable runtime overhead for complex structural coverage metrics such as Modified Condition/Decision (MC/DC). Code instrumentation, in general, has to be approached with great care to ensure it does not modify the behavior of the original code. Furthermore, instrumented code cannot be used in conjunction with other analyses that reason about the structure and semantics of the code under test. In this work, we introduce a non-intrusive preprocessing approach for computing structural coverage information. It uses a static partial evaluation of the decisions in the source code and a source-to-bytecode mapping to generate the information necessary to efficiently track structural coverage metrics during execution. Our technique is flexible; the results of the preprocessing can be used by a variety of coverage-driven software analysis tasks, including automated analyses that are not possible for instrumented code. Experimental results in the context of symbolic execution show the efficiency and flexibility of our nonintrusive approach for computing code coverage information

DO-178C↗

A Digital Tectonic Activity Map of the Earth

The subject of neotectonics, covering the structures and structural activity of the last 5 million years (i.e., post-Miocene) is a well-recognized field, including "active tectonics," focussed on the last 500,000 years in a 1986 National Research Council report of that title. However, there is a cartographic gap between tectonic maps, generally showing all features regardless of age, and maps of current seismic or volcanic activity. We have compiled a map intended to bridge this gap, using modern data bases and computer-aided cartographic techniques. The maps presented here are conceptually descended from an earlier map showing tectonic and volcanic activity of the last one million years. Drawn by hand with the National Geographic Society's 1975 "The Physical World" map as a base, the 1981 map in various revisions has been widely reproduced in textbooks and various technical publications. However, two decades of progress call for a completely new map that can take advantage of new knowledge and cartographic techniques. The digital tectonic activity map (DTM), presented in shaded relief (Fig. 1) and schematic (Fig. 2) versions, is the result. The DTM is intended to show tectonism and volcanism of the last one million years, a period long enough to be representative of global activity, but short enough that features such as fault scarps and volcanos are still geomorphically recognizable. Data Sources and Cartographic Methods The DTM is based on a wide range of sources, summarized in Table 1. The most important is the digital elevation model, used to construct a shaded relief map. The bathymetry is largely from satellite altimetry, specifically the marine gravity compilations by Smith and Sandwell (1996). The shaded relief map was designed to match the new National Geographic Society world physical map (1992), although drawn independently, from the digital elevation model. The Robinson Projection is used instead of the earlier Van der Grinten one. Although neither conformal nor equal-area, the Robinson Projection provides a reasonable compromise and retains useful detail at high latitudes.

Lowman, Paul↗

Applications of remote sensing, volume 3

The author has identified the following significant results. Of the four change detection techniques (post classification comparison, delta data, spectral/temporal, and layered spectral temporal), the post classification comparison was selected for further development. This was based upon test performances of the four change detection method, straightforwardness of the procedures, and the output products desired. A standardized modified, supervised classification procedure for analyzing the Texas coastal zone data was compiled. This procedure was developed in order that all quadrangles in the study are would be classified using similar analysis techniques to allow for meaningful comparisons and evaluations of the classifications.

Landgrebe, D. A.↗

Strain gage installation manual

Detailed specifications for installing laboratory strain gages are compiled into handy reference manual that provides laboratory technicians with ready source of instructions on techniques and procedures for cementing a wide variety of strain gages onto most of the commonly encountered engineering materials.

Nichols, D. W.↗

Gear Handbook

Reference publication integrates results of 15 years of NASA-related gear research compiled to form complete design synthesis using latest analytical methods, materials, and lubrication analysis and techniques.

Coy, John J.↗

Using Expert Systems For Computational Tasks

Transformation technique enables inefficient expert systems to run in real time. Paper suggests use of knowledge compiler to transform knowledge base and inference mechanism of expert-system computer program into conventional computer program. Main benefit, faster execution and reduced processing demands. In avionic systems, transformation reduces need for special-purpose computers.

Duke, Eugene L.↗

New Examination of the Raman Lidar Technique for Water Vapor and Aerosols: Evaluating the Temperature Dependent Lidar Equations - Paper 1

The intent of this paper and its companion is to compile together the essential information required for the analysis of Raman lidar water vapor and aerosol data acquired using a single laser wavelength. In this first paper several details concerning the evaluation of the lidar equation when measuring Raman scattering are considered. These details include the influence of the temperature dependence of both pure rotational and vibrational-rotational Raman scattering on the lidar profile. These are evaluated for the first time using a new form of the lidar equation. The results indicate that, for the range of temperatures encountered in the troposphere, the magnitude of the temperature dependent effect can reach 10% or more for narrowband Raman water vapor measurements. Also the calculation of atmospheric transmission is examined carefully including the effects of depolarization. Different formulations of Rayleigh cross section determination commonly used in the lidar field are compared revealing differences up to 5% among the formulations. The influence of multiple scattering on the measurement of aerosol extinction using the Raman lidar technique is considered as are several photon pulse-pileup correction techniques.

Whiteman, David N.↗

Classification of mafic clasts from mesosiderites - Implications for endogenous igneous processes

Results are presented from an analysis of 13 igneous pebbles from the Vaca Muerta, EET87500, and Bondoc mesosiderites, using electron microprobe and instrumental neutron activation techniques. These data, combined with literature data on compositions of 43 mesosiderite clasts were used to compile a classification scheme for the various types of mafic silicate clasts that occur in mesosiderites. These clasts were classified into five principal groups: (1) polygenic and monogenic cumulates (30 percent); (2) polygenic basalts (30 percent); (3) quench-textured rocks, comprising two compositional subgroups (those which resemble basaltic eucrites (5 percent), and those which resemble cumulate eucrites (2 percent)); (4) monogenic basalts (11 percent); and (5) ultramafic rocks, consisting mainly of large crystals of orthopyroxene (9 percent) or olivine (4 percent). The conditions under which these clasts were formed are discussed.

Rubin, Alan E.↗

Development and Validation of NDE Standards for NASA’s Advanced Composites Project

The adoption of composite materials in aircraft manufacturing for use in structural applications continues to increase but is still relatively new to the industry. Composite components have large development and certification costs in comparison to metallic structures. Traditional methods of nondestructive evaluation (NDE) used for isotropic materials such as metals may not be adequate for composite applications and therefore is a contributing factor to the cost and complexity of developing new structural composites. Additionally, the defects of interest in composite materials are significantly different from metals. Thus, good quality composite reference standards are essential to obtaining reliable and quantifiable NDE results. Ideally, reference standards contain flaws or damage whose NDE indications most closely represent those created by actual flaws/damage. They should also be easy to duplicate and inexpensive to manufacture. NASA’s Advanced Composites Project, working with industry partners, developed a set of composite standards that contain a range of validated defects representing those typically found in aerospace composite materials. This paper will provide an overview of the standards fabricated, the manufacturing plans used to fabricate them, the types of defects included, and validation testing that has performed. Also discussed is an inter-laboratory “round-robin” test that is being performed on these standards. The paper will describe a guidance document being compiled to outline relevant inspection procedures for challenging and critical defects unique to composites where conventional techniques may not be appropriate.

Cramer, K. Elliott↗

FORMAC integration program: A special applications package used in developing techniques of orbital decay and long term ephemeris prediction for satellites in earth orbit

The symbolic manipulation capabilities of the FORMAC (Formula Manipulation Compiler) language are employed to expand and analytically evaluate integrals. The program integration is effected by expanding the integral(s) into a series of subintegrals and then substituting a pre-derived and pre-coded solution for that particular subintegral. Derivation of the integral solutions necessary for precoding is included, as is a discussion of the FORMAC system limitations encountered in the programming effort.

Rowe, C. K.↗

Welding and joining: A compilation

A compilation is presented of NASA-developed technology in welding and joining. Topics discussed include welding equipment, techniques in welding, general bonding, joining techniques, and clamps and holding fixtures.

Source record↗