Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Commanding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Project Hermes 'Use of Smartphones for Receiving Telemetry and Commanding a Satellite'

TCPIP protocols can be applied for satellite command, control, and data transfer. Project Hermes was an experiment set-up to test the use of the TCPIP protocol for communicating with a space bound payload. The idea was successfully demonstrated on high altitude balloon flights and on a sub-orbital sounding rocket launched from NASAs Wallops Flight Facility. TCPIP protocols can be applied for satellite command, control, and data transfer. Project Hermes was an experiment set-up to test the use of the TCPIP protocol for communicating with a space bound payload. The idea was successfully demonstrated on high altitude balloon flights and on a sub-orbital sounding rocket launched from NASAs Wallops Flight Facility.

Telemetry↗
NASA NTRS1994

Fault Protection Design for the Command and Data Subsystem on the Cassini Spacecraft

The Command and Data Subsystem (CDS) on Cassini is responsible for uplink command processing, spacecraft intercommunications and control, and downlink telemetry formatting. The 10.7 year mission life, 160 minute round-trip light time, and extended periods of operation without continuous ground communications drive the CDS design in directions of redundancy, autonomy, and fault protection to accomodate the mission objectives.

Cassini↗
NASA NTRSDate not supplied

Software-Only Key Management and Cryptography (KMC) for Spacecraft Command Encryption

The Jet Propulsion Laboratory (JPL) Advanced Multi-Mission Operations System (AMMOS) in partnership with NASA’s Katherine Johnson Independent Verification and Validation (NASA IV&V) Jon McBride Software Testing and Research (JSTAR) laboratory have jointly developed a command encryption capability that provides a software-only encryption solution utilizing the CCSDS Space Data Link Security Protocol. This solution, named Key Management and Cryptography (KMC), incorporates JPL’s encryption service with the JSTAR open-source CryptoLib library, providing a solution for spacecraft command encryption, which is required per NASA standard NASA-STD-1006-A. This paper will focus on its design, usage, and operation for two SmallSat missions, along with its future expanded functionality of end-to-end spacecraft encryption.

command encryption↗
NASA NTRSDate not supplied

Lunar Command and Control Interoperability (LuCCI) Project Overview

The Lunar Command and Control Interoperability (LuCCI) project was formed to address a gap in how Lunar Surface Systems (LSS) would interoperate across multiple programs, commercial partners, and international partners. The project objective is to define, prototype, integrate, and evaluate an interoperable lunar command, control, data, and software reference architecture to enable autonomy and informatics capability through common standards across LSS.

Communications↗
NASA NTRS1972

Development and testing of the flight command subsystem for the Mariner Mars 1971 spacecraft

The flight command subsystem for the Mariner Mars 1971 spacecraft is of the same basic design and construction as that for Mariner Mars 1969 except for its expanded capability. Its primary purpose is to provide remote control for the spacecraft. This report briefly describes the design changes, fabrication, and significant problems associated with the development of the Mariner Mars 1971 flight command subsystem.

Chitty, W. H.↗
NASA NTRS1973

Digital data command bus

Command bus constructed from coaxial cable has short segments of its outer jacket and shield removed and replaced with small ferrite cores carrying multiturn windings connected to decoder. Device reduces number of wire pairs required to communicate command data to systems and subsystems.

Milligan, G. C.↗
NASA NTRS1972

Pressure signatures for the Apollo command module and the Saturn 5 launch vehicle with a discussion of strong shock extrapolation procedures

Wind tunnel pressure signatures measured at Mach 10.1 for model of the Apollo Command Module and at Mach numbers from 3.01 to 7.91 for two models of the Saturn launch configuration are presented. The signatures for the command module were obtained at roll angles ranging from 0 deg to 180 deg. A brief discussion of the extrapolation of strong pressure signatures is included in the report.

Hicks, R. M.↗
NASA NTRS1972

Ground-Commanded Television Assembly (GCTA)

A ground-commanded color television assembly (GCTA) was designed for use on lunar explorations associated with NASA manned Apollo missions. The camera system as seen on Apollo 15 provided television coverage in the vicinity of the lunar module (LM) landing site, and was mounted on the lunar roving vehicle (LRV) to provide color coverage of astronaut activity and lunar topography during traverses on the surface. Remote control of the camera from earth was accomplished through the existing real-time Apollo command links. The assembly is illustrated. The configuration satisfied all anticipated requirements of the Apollo 15 mission and was fully responsive to specifications. The technical approach was based on proven designs and offered maximum mission flexibility, potential growth, and capability to withstand environmental extremes encountered on the lunar surface.

Source record↗
NASA NTRS1973

NASIS data base management system - IBM 360/370 OS MVT implementation. 5: Retrieval command system reference manual

The retrieval command subsystem reference manual for the NASA Aerospace Safety Information System (NASIS) is presented. The output oriented classification of retrieval commands provides the user with the ability to review a set of data items for verification or inspection as a typewriter or CRT terminal and to print a set of data on a remote printer. Predefined and user-definable data formatting are available for both output media.

Source record↗
NASA NTRS1973

Task four report: Telemetry, command, and data handling

An overview of the telemetry, command, and data handling features of four spacecraft developed under GSFC management is presented. Two of these spacecraft ATS and SMS, are designed for geostationary orbit; the other two OSO and ERTS, are designed for low earth orbits. The program time spans for these spacecraft are as shown. The programs are seen to be near contemporary, especially in the 1973, 1974 period. All of the spacecraft listed were developed under GSFC control and are thus subject to the standards set forth in the Aerospace Data System Standard developed by GSFC. These standards must be adhered to by all spacecraft programs under GSFC control or utilizing STDN unless waivers have been granted. The standards were developed to maximize the utilization of the large amount of standard equipment at each STDN ground facility. The standards impose bounds on both the command and telemetry formats to be compatible with the STDN ground station unless valid and acceptable reasons are raised to deviate from these restraints.

Source record↗
NASA NTRS1976

A velocity-command controller for a VTOL aircraft

A technique is presented for calculating feedback and feedforward gain matrices that enable a VTOL aircraft to track input commands of forward and vertical velocity while maintaining acceptable responses to pilot inputs. Leverrier's algorithm is used for determining a set of state-variable, feedback gains that force the closed-loop poles and zeros of one pilot-input transfer function to pre-selected positions in the s-plane. This set of feedback gains is then used to calculate the feedback and feedforward gains for the velocity-command controller. The method is computationally attractive since the gains are determined by solving systems of linear, simultaneous equations. The method is used in a digital simulation of the CH-47 helicopter to control longitudinal dynamics.

Reid, G. F.↗
NASA NTRS1976

Flight test evaluation of a separate surface attitude command control system on a Beech 99 airplane

A joint NASA/university/industry program was conducted to flight evaluate a potentially low cost separate surface implementation of attitude command in a Beech 99 airplane. Saturation of the separate surfaces was the primary cause of many problems during development. Six experienced professional pilots made simulated instrument flight evaluations in light-to-moderate turbulence. They were favorably impressed with the system, particularly with the elimination of control force transients that accompanied configuration changes. For ride quality, quantitative data showed that the attitude command control system resulted in all cases of airplane motion being removed from the uncomfortable ride region.

Gee, S. W.↗
NASA NTRS1976

Command detector SNR estimator and lock status monitor circuitry

A breadboard of the command detector signal-to-noise-ratio estimator and lock status monitor was built on a wire-wrap card. The breadboard was integrated with the standard command detector, and its performance was measured. The design, design constraints, and construction of the breadboard are described. The performance is shown to agree with the theoretical model.

Emerson, R. F.↗
NASA NTRS1976

Flight test evaluation of a separate surface attitude command control system on a Beech 99 airplane

A joint NASA/university/industry program was conducted to flight evaluate a potentially low cost separate surface implementation of attitude command in a Beech 99 airplane. Saturation of the separate surfaces was the primary cause of many problems during development. Six experienced professional pilots who made simulated instrument flight evaluations experienced improvements in airplane handling qualities in the presence of turbulence and a reduction in pilot workload. For ride quality, quantitative data show that the attitude command control system results in all cases of airplane motion being removed from the uncomfortable ride region.

Gee, S. W.↗
NASA NTRS1975

Command and data handling of science signals on Spacelab

The Orbiter Avionics and the Spacelab Command and Data Management System (CDMS) combine to provide a relatively complete command, control, and data handling service to the instrument complement during a Shuttle Sortie Mission. The Spacelab CDMS services the instruments and the Orbiter in turn services the Spacelab. The CDMS computer system includes three computers, two I/O units, a mass memory, and a variable number of remote acquisition units. Attention is given to the CDMS high rate multiplexer, CDMS tape recorders, closed circuit television for the visual monitoring of payload bay and cabin area activities, methods of science data acquisition, questions of transmission and recording, CDMS experiment computer usage, and experiment electronics.

Mccain, H. G.↗
NASA NTRS1976

A velocity-command controller for a VTOL aircraft

A technique is presented for calculating feedback and feedforward gain matrices that enable a VTOL aircraft to track input commands of forward and vertical velocity while maintaining acceptable responses to pilot inputs. Leverrier's algorithm is used for determining a set of state-variable, feedback gains that force the closed-loop poles and zeros of one pilot-input transfer function to pre-selected positions in the s-plane. This set of feedback gains is then used to calculate the feedback and feedforward gains for the velocity-command controller. The method is computationally attractive since the gains are determined by solving systems of linear, simultaneous equations. The method has been used in a digital simulation of the CH-47 helicopter to control longitudinal dynamics.

Reid, G. F.↗