Results for “Centrality” — Page 9

DOE OSTI2024

Observation of Medium-Induced Yield Enhancement and Acoplanarity Broadening of Low-𝑝T Jets from Measurements in 𝑝⁢𝑝 and Central Pb-Pb Collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The ALICE Collaboration reports the measurement of semi-inclusive distributions of charged-particle jets recoiling from a high transverse momentum (high p T ) hadron trigger in proton-proton and central Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV. A data-driven statistical method is used to mitigate the large uncorrelated background in central Pb-Pb collisions. Recoil jet distributions are reported for jet resolution parameter R = 0.2, 0.4, and 0.5 in the range 7 < p T.jet < 140 GeV=c and trigger-recoil jet azimuthal separation π/2 < Δφ < π. The measurements exhibit a marked medium-induced jet yield enhancement at low p T and at large azimuthal deviation from Δφ ~ π. The enhancement is characterized by its dependence on Δφ, which has a slope that differs from zero by 4.7σ. Comparisons to model calculations incorporating different formulations of jet quenching are reported. These comparisons indicate that the observed yield enhancement arises from the response of the QGP medium to jet propagation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

Conceptual Design of High Field Central Solenoid for Fusion Nuclear Science Facility

Fusion Nuclear Science Facility (FNSF) is a critical fusion nuclear step in the US beyond ITER before proceeding to a larger and electricity producing fusion power plant. Although FNSF is a steady state machine to be operated at high duty cycle, a high field and high current density central solenoid magnet is needed for plasma startups. Due to space constraints in the FNSF in-board radial build, the magnetic field and coil current density required exceed conventional low temperature superconductor (LTS) performance limits and the design can only be achieved by high temperature superconductors (HTS). The design for the central solenoid, also called the ohmic heating (OH) magnet for FNSF shall meet the 100 Weber double flux swing requirement for plasma startups. Finally, the stresses at such a high field and high current density coil may require a bucked and wedged TF-OH design to accommodate space for coil winding support structures in in-board system radial build for high field FNSF operations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Experimental evaluation of respiratory droplet spread to rooms connected by a central ventilation system

This article presents results from an experimental study to ascertain the transmissibility of the SARS-CoV-2 virus between rooms in a building that are connected by a central ventilation system. Respiratory droplet surrogates made of mucus and virus mimics were released in one room in a test building and measurements of concentration levels were made in other rooms connected via the ventilation system. The paper presents experimental results for different ventilation system configurations, including ventilation rate, filtration level (up to MERV-13), and fractional outdoor air intake. The most important finding is that respiratory droplets can and do transit through central ventilation systems, suggesting a mechanism for viral transmission (and COVID-19 specifically) within the built environment in reasonable agreement with well-mixed models. We also find the deposition of these droplets on room walls to be negligibly small. Furthermore, the energy use impact of the different configuration settings is also quantified to help inform intelligent building operation that can simultaneously address energy use and occupant health.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Study of central exclusive $\pi^+\pi^-$ production in proton-proton collisions at $\sqrt{s} =$ 5.02 and 13 TeV

Central exclusive and semiexclusive production of pairs is measured with the CMS detector in proton-proton collisions at the LHC at center-of-mass energies of 5.02 and 13TeV. The theoretical description of these nonperturbative processes, which have not yet been measured in detail at the LHC, poses a significant challenge to models. The two pions are measured and identified in the CMS silicon tracker based on specific energy loss, whereas the absence of other particles is ensured by calorimeter information. The total and differential cross sections of exclusive and semiexclusive central production are measured as functions of invariant mass, transverse momentum, and rapidity of the system in the fiducial region defined as transverse momentum and pseudorapidity . The production cross sections for the four resonant channels [inline-graphic not available: see fulltext], , [inline-graphic not available: see fulltext], and [inline-graphic not available: see fulltext]are extracted using a simple model. These results represent the first measurement of this process at the LHC collision energies of 5.02 and 13TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Spike-based graph centrality measures

We derive several spike-based routines that compute or establish bounds on radial centrality measures for undirected graphs and trees without the use of matrix multiplication. These spike-based centrality measures utilize a direct embedding of graph nodes and edges into neurons and synapses, can be implemented with static synapses or plastic synapses, and rely on minimal post-processing of spike rasters. This work contributes to the growing set of graphical applications for neuromorphic hardware.

Hamilton, Kathleen↗

DOE OSTI2026

Retrofit Energy Analysis and Central Thermal modeling (REACT) v1.0

REACT is a website designed to simplify the analysis and decision-making process for retrofitting existing central plant heating and cooling systems with advanced heat pump technologies. The tool evaluates the technical and economic viability of replacing traditional boilers with various options including water-to-water or air-to-water heat pumps, which can provide efficient and lower-cost heating and cooling. It allows users to compare current central plant configurations with retrofit scenarios, assessing energy consumption, life-cycle costs, and environmental impact. Retrofitting traditional boiler and chiller systems with water-to-water or air-to-water heat pumps can significantly reduce energy consumption and lower lifecycle costs. The REACT provides: User-Friendly Tools: A user friendly web interface for quick, intuitive analysis accessible to non-experts. Advanced Modeling: A Python-powered engine for detailed parametric studies, optimization, and research applications. Comprehensive Analysis: Lifecycle cost evaluation, energy consumption modeling, and environmental impact assessment. Visual Insights: A variety of plots to visualize system performance and design trade-offs. The engine for the website (REACT) bases on several Python libraries, and the website will be hosted on an ETA server.

Kim, Donghun [Lawrence Berkeley National Laborator↗

DOE OSTI2021

A Simple Lagrangian Parcel Model for the Initiation of Summer-time Mesoscale Convective Systems over the Central United States

Mesoscale convective systems (MCSs) account for more than 50% of summertime precipitation over the central United States and have a significant impact on local weather and hydrologic cycle. It is hypothesized that the inadequate treatment of MCSs is responsible for the long-standing warm and dry bias over the central United States in coarse-resolution general circulation model (GCM) simulations. In particular, a better understanding of MCS initiation is still lacking. Here a single-column Lagrangian parcel model is first developed to simulate the basic features of a rising parcel. This simple model demonstrates the collective effects of boundary layer moistening and dynamical lifting in triggering convective initiation and reproduces successfully its early afternoon peak with surface equivalent potential temperature as a controlling factor. It also predicts that convection is harder to trigger in the future climate under global warming, consistent with the results from convection-permitting regional climate simulations. Then, a multicolumn model that includes an array of single-column models aligned in the east–west direction and incorporates idealized cold pool interaction mechanisms is developed. The multicolumn model captures readily the cold pool–induced upscale growth feature in MCS genesis from initially scattered convection that is organized into a mesoscale cluster in a few hours. It also highlights the crucial role of lifting effects due to cold pool collision and spreading, subsidence effect, and gust front propagation speed in controlling the final size of mesoscale clusters and cold pool regions. This simple model should be useful for understanding fundamental mechanisms of MCS initiation and providing guidance for improving MCS simulations in GCMs.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

The Role of Seasonality and the ENSO Mode in Central and East Pacific ENSO Growth and Evolution

Abstract A cyclostationary linear inverse model (CSLIM) is used to investigate the seasonal growth of tropical Pacific Ocean El Niño–Southern Oscillation (ENSO) events with canonical, central Pacific (CP), or eastern Pacific (EP) sea surface temperature (SST) characteristics. Analysis shows that all types of ENSO events experience maximum growth toward final states occurring in November and December. ENSO events with EP characteristics also experience growth into May and June, but CP events do not. A single dominant “ENSO mode,” growing from an equatorial heat content anomaly into a characteristic ENSO-type SST pattern in about 9 months (consistent with the delayed/recharge oscillator model of ENSO), is essential for the predictable development of all ENSO events. Notably, its seasonality is responsible for the late-calendar-year maximum in ENSO amplification. However, this ENSO mode alone does not capture the observed growth and evolution of diverse ENSO events, which additionally involve the seasonal evolution of other nonorthogonal Floquet modes. EP event growth occurs when the ENSO mode is initially “covered up” in combination with other Floquet modes. The ENSO mode’s slow seasonal evolution allows it to emerge while the other modes rapidly evolve and/or decay, leading to strongly amplifying and more predictable EP events. CP events develop when the initial state has a substantial contribution from Floquet modes with meridional mode–like SST structures. Thus, while nearly all ENSO events involve the seasonally varying ENSO-mode dynamics, the diversity and predictability of ENSO events cannot be understood without identifying contributions from the remaining Floquet modes. Significance Statement The purpose of this study is to identify structures that lead to seasonal growth of diverse types of El Niño–Southern Oscillation (ENSO) events. An important contribution from this study is that it uses an observationally constrained, empirically derived seasonal model. We find that processes affecting the evolution of diverse ENSO events are strongly seasonally dependent. ENSO events with eastern equatorial Pacific sea surface temperature (SST) characteristics are closely related to a single “ENSO mode” that resembles theoretical models of ENSO variability. ENSO events that have central equatorial Pacific SST characteristics include contributions from additional “meridional mode” structures that evolve via different physical processes. These findings are an important step in evaluating the seasonal predictability of ENSO diversity.

Vimont, Daniel J.↗

DOE OSTI2022

Central-place foraging poses variable constraints year-round in a neotropical migrant

Background: “Central-place foragers” are constrained in their habitat selection and foraging range by the frequency with which they need to return to a central place. For example, chick-rearing songbirds that must feed their offspring hourly might be expected to have smaller foraging ranges compared to non-breeding songbirds that return nightly to a roost. Methods: We used GPS units to compare the foraging behaviour of an aerial insectivorous bird, the purple martin (Progne subis), during the breeding season in three regions across North America, as well as the non-breeding season in South America. Specifically, we tested foraging range size and habitat selection. Results: Foraging range did not vary among regions during breeding (14.0 ± 39.2 km 2 ) and was larger during the nonbreeding period (8840 ± 8150 km 2 ). Purple martins strongly preferred aquatic habitats to other available habitats year-round and in the Amazon commuted from night roosts in low productivity sediment-poor water, where risk of predation was probably low, to daytime foraging sites in productive sediment-rich water sites. Conclusions: We provide the first estimates for foraging range size in purple martins and demonstrate foraging preference for aquatic habitats throughout two stages of the annual cycle. Understanding foraging constraints and habitat of aerial insectivores may help plan conservation actions throughout their annual cycle. Future research should quantify foraging behaviour during the post-breeding period and during migration.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Variance-Reduced Accelerated First-Order Methods: Central Limit Theorems and Confidence Statements

In this paper, we consider a strongly convex stochastic optimization problem and propose three classes of variable sample-size stochastic first-order methods: (i) the standard stochastic gradient descent method, (ii) its accelerated variant, and (iii) the stochastic heavy-ball method. In each scheme, the exact gradients are approximated by averaging across an increasing batch size of sampled gradients. We prove that when the sample size increases at a geometric rate, the generated estimates converge in mean to the optimal solution at an analogous geometric rate for schemes (i)–(iii). Based on this result, we provide central limit statements, whereby it is shown that the rescaled estimation errors converge in distribution to a normal distribution with the associated covariance matrix dependent on the Hessian matrix, the covariance of the gradient noise, and the step length. If the sample size increases at a polynomial rate, we show that the estimation errors decay at a corresponding polynomial rate and establish the associated central limit theorems (CLTs). Under certain conditions, we discuss how both the algorithms and the associated limit theorems may be extended to constrained and nonsmooth regimes. As a result, we provide an avenue to construct confidence regions for the optimal solution based on the established CLTs and test the theoretical findings on a stochastic parameter estimation problem.

Lei, Jinlong↗

DOE OSTI2024

Characteristics and sources of fluorescent aerosols in the central Arctic Ocean

The Arctic is sensitive to cloud radiative forcing. Due to the limited number of aerosols present throughout much of the year, cloud formation is susceptible to the presence of cloud condensation nuclei and ice nucleating particles (INPs). Primary biological aerosol particles (PBAP) contribute to INPs and can impact cloud phase, lifetime, and radiative properties. We present yearlong observations of hyperfluorescent aerosols (HFA), tracers for PBAP, conducted with a Wideband Integrated Bioaerosol Sensor, New Electronics Option during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition (October 2019–September 2020) in the central Arctic. We investigate the influence of potential anthropogenic and natural sources on the characteristics of the HFA and relate our measurements to INP observations during MOSAiC. Anthropogenic sources influenced HFA during the Arctic haze period. But surprisingly, we also found sporadic “bursts” of HFA with the characteristics of PBAP during this time, albeit with unclear origin. The characteristics of HFA between May and August 2020 and in October 2019 indicate a strong contribution of PBAP to HFA. Notably from May to August, PBAP coincided with the presence of INPs nucleating at elevated temperatures, that is, >–9°C, suggesting that HFA contributed to the “warm INP” concentration. The air mass residence time and area between May and August and in October were dominated by the open ocean and sea ice, pointing toward PBAP sources from within the Arctic Ocean. As the central Arctic changes drastically due to climate warming with expected implications on aerosol–cloud interactions, we recommend targeted observations of PBAP that reveal their nature (e.g., bacteria, diatoms, fungal spores) in the atmosphere and in relevant surface sources, such as the sea ice, snow on sea ice, melt ponds, leads, and open water, to gain further insights into the relevant source processes and how they might change in the future.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Characteristics and effects of aerosols during blowing snow events in the central Arctic

Sea salt aerosol (SSaer) significantly impacts aerosol-radiation and aerosol-cloud interactions, and sublimated blowing snow is hypothesized to be an important SSaer source in polar regions. Understanding blowing snow and other wind-sourced aerosols’ climate relevant properties is needed, especially during winter when Arctic amplification is greatest. However, most of our understanding of blowing snow SSaer comes from modeling studies, and direct observations are sparse. Additionally, SSaer can originate from multiple sources, making it difficult to disentangle emission processes. Here, we present comprehensive observations of wind-sourced aerosol during blowing snow events from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition in the central Arctic. High wind speed strongly enhances total aerosol number, submicron sodium chloride mass, cloud condensation nuclei concentrations, and scattering coefficients. Generally, the relative response of aerosol properties to wind speed enhancement is strongest in fall when Arctic aerosol concentrations are lowest. Blowing snow events showed similar aerosol and environmental properties across events, apart from occasions with high snow age (>6 days since last snowfall). Coarse-mode number concentrations (>1 μm) are better explained by variability in wind speed averaged over 12-h air mass back trajectories arriving at the MOSAiC site compared to local, instantaneous wind speed, suggesting the importance of regional transport and consideration of air mass history for wind-driven aerosol production. These MOSAiC observations provide new insights into wind-driven aerosol in the central Arctic and may help validate modeling studies and improve model parameterizations particularly for aerosol direct and indirect radiative forcing.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗