Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CaSe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Forced baroclinic ocean motions. II - The linear equatorial bounded case

Results obtained in the first part of this paper (1976), which studied forced baroclinic ocean motions in the linear equatorial unbounded case, are extended to the case of an ocean bounded by two meridians. A complete solution for the linear spin-up in response to a switched-on, x-dependent wind stress is obtained in terms of five components: the unbounded nonoscillatory response to the wind stress forcing; the inertia-gravity waves generated when the forcing switches on, together with their reflections; the quasi-geostrophic Rossby modes forming the eastern boundary response and a western boundary layer; and the equatorial Kelvin wave component of the western boundary response. Kelvin waves are generated if the forcings include a zonal wind component that is symmetric about the equator or an antisymmetric meridional wind stress. For non-Kelvin symmetries, spin-up occurs entirely by the effects of Rossby waves emanating from the eastern boundary. The state approaches the steady solution as increasing numbers of these reach an interior point. In Kelvin symmetries, the Rossby waves act to bring the sea surface tilt to the steady value and the spin-up of the tilt proceeds as in non-Kelvin cases.

Cane, M. A.↗
NASA NTRS1979

Seasat-A ASVT: Commercial demonstration experiments. Results analysis methodology for the Seasat-A case studies

The SEASAT-A commercial demonstration program ASVT is described. The program consists of a set of experiments involving the evaluation of a real time data distributions system, the SEASAT-A user data distribution system, that provides the capability for near real time dissemination of ocean conditions and weather data products from the U.S. Navy Fleet Numerical Weather Central to a selected set of commercial and industrial users and case studies, performed by commercial and industrial users, using the data gathered by SEASAT-A during its operational life. The impact of the SEASAT-A data on business operations is evaluated by the commercial and industrial users. The approach followed in the performance of the case studies, and the methodology used in the analysis and integration of the case study results to estimate the actual and potential economic benefits of improved ocean condition and weather forecast data are described.

Source record↗
NASA NTRS1979

Reusable solid rocket motor case - Optimum probabilistic fracture control

A methodology for the reliability analysis of a reusable solid rocket motor case is discussed in this paper. The analysis is based on probabilistic fracture mechanics and probability distribution for initial flaw sizes. The developed reliability analysis can be used to select the structural design variables of the solid rocket motor case on the basis of minimum expected cost and specified reliability bounds during the projected design life of the case. Effects on failure prevention plans such as nondestructive inspection and the material erosion between missions can also be considered in the developed procedure for selection of design variables. The reliability-based procedure that has been discussed in this paper can easily be modified to consider other similar structures of reusable space vehicle systems with different fracture control plans.

Hanagud, S.↗
NASA NTRS1980

A description of the NSSL cases used for a simulated VAS retrieval study

A documentation of eight National Severe Storm Laboratory severe storm cases, which serve as a basis for a simulated VISSR Atmospheric Sounder retrieval study, is presented in this paper. Six of the selected cases provide a control data set to complete the statistical information needed for retrieval techniques based upon the use of regression matrices. The other two cases are to be used in the actual retrieval experiments. The selection was based upon the presence of moisture gradients in the analysis region, the availability of satellite images at the selected time periods, and the extent of cloud cover within the observing network.

Mostek, A.↗
NASA NTRS1981

Idiopathic orthostatic hypotension: Recent data (eleven cases) and review of the literature

Eight cases of Shy-Drager syndrome and three of Bradbury-Eggleston idiopathic orthostatic hypotension were examined. In all cases, examination of circulatory reflexes showed major dysfunction of the sympathetic vasoconstrictor system. Anomalies in the vagal cardiomoderator system were less constant. Normal urinary elimination of catecholamines was recorded daily. Characteristically, no elevation of blood or urine norepinephrine levels were found in orthostatism. Insulin hypoglycemia normally raised urinary adrenalin elimination in three of ten patients. Plasma dopa-beta-hydroxylase activity was normal. Renin-angiotensin-aldosterone system showed variable activity at basal state but usually rose during orthostatism. On the average, very low homovanillic acid levels were found in cerebrospinal fluid before and after probenecid; hydroxyindolacetic acid was normal. Cerebral autoregulation had deteriorated in two of four cases. Physiopathologically the two clinical types are indistinguishable with or without central neurological signs.

Ninet, J.↗
NASA NTRS1980

The multicategory case of the sequential Bayesian pixel selection and estimation procedure

A Bayesian technique for stratified proportion estimation and a sampling based on minimizing the mean squared error of this estimator were developed and tested on LANDSAT multispectral scanner data using the beta density function to model the prior distribution in the two-class case. An extention of this procedure to the k-class case is considered. A generalization of the beta function is shown to be a density function for the general case which allows the procedure to be extended.

Pore, M. D.↗
NASA NTRS1980

Verification of the SRB motor case pin retainer band tips

The pin retainer band is a 1-1/4 in. wide by about 1/32 in. thick steel band that is stretched over the pins circumferentially at the joints of the solid rocket booster (SRB) motor case segments. Its purpose is to hold the retaining pins in place during flight. Since the band is thin and is mounted stretched, or under tension, over the pins which are greased in place, it is necessary to protect it thermally. Three typical areas of the band location on the SRB motor case joints were chosen for verifying the cork thermal prection system (TPS) performance on the band: the joint in front of the attach ring, at the aft skirt joint in front of the kick ring and in an unperturbed area at the forward segments of the SRB motor cases. The kick ring area pin retainer band cork TPS passed the test requirements in the region where there are no phenolic splice caps. In the splice cap areas where the band TPS is closed out around the splice with K5NA, additional amounts of K5NA material is required to adequately protect the steel band. TPS requirements were easily met in the one location where the ends of the steel band are joined together after installation and tensioning. The attack ring area pin retainer band TPS did not quite pass the heat load requirements with the .375 in. thick cork TPS as used for the kick ring area band. It is recommended that the cork thickness here be increased to .50 in. The unperturbed area band TPS presented no problems.

Karu, Z. S.↗
NASA NTRS1986

Design and development of high strength parachutes for recovery of Filament Wound Case Space Shuttle solid rocket boosters

The Filament Wound Case (FWC) solid rocket boosters, developed for Space Shuttle launches from the West coast, are substantially lighter than their steel case counterparts, but present unique recovery system challenges due to their aft center of gravity location. This causes them to re-enter in a tail-first attitude, rather than broadside like the steel case boosters, resulting in much higher dynamic pressure at deployment. This paper outlines the differences in recovery conditions, and describes the design, development, and testing of new parachutes to meet this challenging new requirement.

Corwin, R. A.↗
NASA NTRS1987

Recombination-line intensities for hydrogenic ions. I - Case B calculations for H I and He II

Assuming Case B of Baker and Menzel (1938), the relative intensities of H I and He II recombination lines are determined for a larger range of temperature and density than previously considered and with the upper principle quantum number up to 50 and the lower number up to 29. Full collisional effects are included, and new collision strengths for the n = 1, 2, and 3 states of He(+) are presented. Case B theory is found to be invalidated for collisional excitation of the n = 3 levels from both n = 1 and n = 2 states under certain conditions which depend upon electron density and the Lyman-alpha escape probability, and the regimes of temperature and density for which Case B is valid are also considered.

Hummer, D. G.↗
NASA NTRS1988

Transfer impedance measurements of the space shuttle Solid Rocket Motor (SRM) joints, wire meshes and a carbon graphite motor case

Using three different current injection methods and a simple voltage probe, transfer impedances for Solid Rocket Motor (SRM) joints, wire meshes, aluminum foil, Thorstrand and a graphite composite motor case were measured. In all cases, the surface current distribution for the particular current injection device was calculated analytically or by finite difference methods. The results of these calculations were used to generate a geometric factor which was the ratio of total injected current to surface current density. The results were validated in several ways. For wire mesh measurements, results showed good agreement with calculated results for a 14 by 18 Al screen. SRM joint impedances were independently verified. The filiment wound case measurement results were validated only to the extent that their curve shape agrees with the expected form of transfer impedance for a homogeneous slab excited by a plane wave source.

Papazian, Peter B.↗
NASA NTRS1988

Reasoning with case histories of process knowledge for efficient process development

The significance of compiling case histories of empirical process knowledge and the role of such histories in improving the efficiency of manufacturing process development is discussed in this paper. Methods of representing important investigations as cases and using the information from such cases to eliminate redundancy of empirical investigations in analogous process development situations are also discussed. A system is proposed that uses such methods to capture the problem-solving framework of the application domain. A conceptual design of the system is presented and discussed.

Bharwani, Seraj S.↗
NASA NTRS1989

Impedance studies of Ni/Cd and Ni/H2 cells using the cell case as a reference electrode

Impedance measurements have been made on several Ni/Cd and Ni/H2 flightweight cells using the case as a reference electrode. For these measurements the voltage of the case with respect to the anode or cathode is unimportant provided that it remains stable during the measurement of the impedance. In the cells measured so far, the voltages of the cell cases with respect to the individual electrodes differ from cell to cell even at the same overall cell voltage, but they remains stable with time. The measurements can thus be used to separate the cell impedance into the contributions of each electrode, allowing improved diagnosis of cell problems.

Reid, Margaret A.↗
NASA NTRS1989

Controls, Astrophysics, and Structures Experiment in Space (CASES)

As the size and performance requirements of future NASA and DOD spacecrafts and payloads tend to increase, the associated control systems that must effect these requirements tend to interact with the vehicle's structural dynamics. Some of the Control Structure Interaction (CSI) issues are being addressed in a flight experiment which is entitled CASES (Controls, Astrophysics and Structures Experiment in Space). As one of the first CSI flight experiments, the main emphasis for CASES is to provide a test bed for validating CSI developments and simultaneously, to pave the way for subsequent CSI experiments and science missions by establishing precedents for flight qualifying Large Space Structures (LSS)-class spacecraft. In addition, CASES provides an opportunity to obtain data bases for in-space controls and structures experiments and, at the same time, to gather hard x ray data from pertinent galactic sources.

Waites, Henry B.↗
NASA NTRS1990

Impedance studies of nickel/cadmium and nickel/hydrogen cells using the cell case as a reference electrode

Impedance measurements have been made on several Ni/Cd and Ni/H2 flight-weight cells using the case as a reference electrode. For these measurements, the voltage of the case with respect to the anode or cathode is unimportant provided that it remains stable during the measurement of the impedance. In the cells measured so far, the voltage of the cell cases with respect to the individual electrodes differ from cell to cell, even at the same overall cell voltage, but they remain stable with time. The measurements can thus be used to separate the cell impedance into the contributions of each electrode, allowing improved diagnosis of cell problems.

Reid, Margaret A.↗
NASA NTRS1991

Flight set 360L007 (STS-33R) case and seals, volume 2

The performance of the 360L007, Seventh Flight, redesigned Solid Rocket Motors (RSRM) is assessed with respect to case hardware and joint sealing issues as seen from post-flight assessment of the case and seals. Potential anomalies are classified and summarized. The post-flight assessment of both motors showed the case segments to be in good condition. Field joint fretting indications on this flight set ranged from none on one joint through light (less than 0.003 inch deep) on most of the joints to locally medium (greater than 0.003, less than 0.005 inch deep) on two joints. No new fretting was found in old fretting locations. All fretting was mapped from the inner clevis leg. The capture feature fretting was not mapped due to the difficulty of measuring the fretting in the capture feature region, but it is assumed that the capture feature had similar damage as the inner clevis leg. Post-flight assessment of both motors showed the seal components to be in good condition.

Carlisle, Alan R.↗
NASA NTRS1990

Flight set 360L009 (STS-36) case and seals component, volume 2

The performance of the 360L009, Ninth Flight, Redesigned Solid Rocket Motors (RSRM) is assessed in respect to case hardware and joint sealing issues as seen from post-fire assessment of the case and seals. In addition, all of the potential anomalies have been classified and summarized. The post-fire assessment of both motors showed the case segments to be in good condition. Field joint fretting of this flight set ranged from light on most of the joints to locally heavy on three of the joints. The LH aft field joint is the most heavily fretted joint to date; this joint had previously fretted areas from STS-27. No new fretting was found in old fretting locations. However, new frets were found at the edges of repaired areas on both the LH center and aft field joints. All fretting was mapped from the inner clevis leg. The capture feature fretting was not mapped due to the difficulty of measuring the fretting in the capture feature region. It is assumed that the capture feature had damage similar to that on the inner clevis leg.

Carlisle, Alan R.↗
NASA NTRS1989

Controls Astrophysics and Structures Experiment in Space (CASES) advanced studies and planning

The CASES (Controls, Astrophysics, and Structures Experiment in Space) program consists of a flight demonstration of CSI (Controls-Structures Interactions) technology on the Space Shuttle. The basis structure consists of a 32 m deployable boom with actuators and sensors distributed along its length. Upon deployment from the Orbiter bay, the CASES structure will be characterized dynamically and its deformations controlled by a series of experimental control laws; and cold gas thrusters at its tip will be used to orient the Orbiter to a fixed celestial reference. The scientific observations will consist of hard x-ray imaging, at high resolution, of the Sun and the Galactic center. The hard x-ray observations require stable (few arc min) pointing at these targets for one or more position-sensitive proportional counters in the Orbiter bay, which view the object to be imaged through an aperture-encoding mask at the boom tip. This report gives the concensus developed at the second CASES Science Working Group meeting, which took place at NASA Marshall Space Flight Center May 16-17, 1990. An earlier paper and scientific summaries are available and form the basis for the present discussion.

Wu, S. T.↗
NASA NTRS1993

The use of multiple models in case-based diagnosis

The work described in this paper has as its goal the integration of a number of reasoning techniques into a unified intelligent information system that will aid flight crews with malfunction diagnosis and prognostication. One of these approaches involves using the extensive archive of information contained in aircraft accident reports along with various models of the aircraft as the basis for case-based reasoning about malfunctions. Case-based reasoning draws conclusions on the basis of similarities between the present situation and prior experience. We maintain that the ability of a CBR program to reason about physical systems is significantly enhanced by the addition to the CBR program of various models. This paper describes the diagnostic concepts implemented in a prototypical case based reasoner that operates in the domain of in-flight fault diagnosis, the various models used in conjunction with the reasoner's CBR component, and results from a preliminary evaluation.

Karamouzis, Stamos T.↗