Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPARATIVE EVALUATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Thermomechanical analysis and modeling of a high-temperature light trapping planar cavity solar receiver

The development of durable particle-based high-temperature solar receivers is critical for advancing concentrating solar-thermal (CST) technologies to enable high-efficiency power generation and industrial process heat. Here, this study presents a computational framework to evaluate the thermomechanical performance of a proposed enclosed light-trapping planar cavity receiver designed for particle-based thermal energy systems. The receiver incorporates absorptive cavities and fluidized particle-bed channels to enhance heat capture and reduce thermal losses. Finite element analysis (FEA) is employed to assess stress, strain, and creep-fatigue behavior under concentrated solar flux using realistic thermal boundary conditions derived from coupled system models and experimental assembly parameters. The analysis investigates the influence of particle-to-wall heat transfer coefficients (HTC) ranging from 800 to 1800 W/m 2 .K on the thermomechanical response of six candidate high-temperature alloys: Alloy 740H, Alloy 282, Alloy 617, 316H, Alloy 230, and 800H. Results show that increasing HTC reduces thermal gradients, leading to lower stresses and strains and extended minimum predicted creep life. While all materials satisfy fatigue life requirements under the investigated conditions, significant differences in creep resistance are observed. Alloy 740H consistently exhibits the longest minimum predicted creep life and the most favorable durability margins, followed by Alloy 282, with the remaining materials showing reduced creep resistance under identical loading. The reported creep lives are conservative lower-bound estimates intended for comparative material evaluation. This framework highlights the critical roles of material selection and geometry optimization in improving mechanical durability and reliability of solar-thermal receivers, forming a foundation for future experimental validation and design optimization.

14 SOLAR ENERGY↗
DOE OSTI2020

Modeling Stochastic Variability in Multiband Time-series Data

In preparation for the era of time-domain astronomy with upcoming large-scale surveys, we propose a state-space representation of a multivariate damped random walk process as a tool to analyze irregularly-spaced multifilter light curves with heteroscedastic measurement errors. We adopt a computationally efficient and scalable Kalman filtering approach to evaluate the likelihood function, leading to maximum O(k 3 n) complexity, where k is the number of available bands and n is the number of unique observation times across the k bands. This is a significant computational advantage over a commonly used univariate Gaussian process that can stack up all multiband light curves in one vector with maximum O(k 3 n 3 ) complexity. Using such efficient likelihood computation, we provide both maximum likelihood estimates and Bayesian posterior samples of the model parameters. Three numerical illustrations are presented: (i) analyzing simulated five-band light curves for a comparison with independent single-band fits; (ii) analyzing five-band light curves of a quasar obtained from the Sloan Digital Sky Survey Stripe 82 to estimate short-term variability and timescale; (iii) analyzing gravitationally lensed g- and r-band light curves of Q0957+561 to infer the time delay. Two R packages, Rdrw and timedelay, are publicly available to fit the proposed models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Interface Coating Design for Dynamic Voltage Stability of Solid‐State Batteries

Abstract Intrinsic or interface thermodynamic voltage windows of solid electrolytes are often narrower than the operational voltage range needed by a full battery, thus various interface decomposition reactions can happen in a practical solid‐state battery. Experimentally, it is found that a proper battery design utilizing the reactions can lead to a dynamic evolution from interface instability to stability, giving the so‐called dynamic voltage stability for advanced battery performance. Here, first the state‐of‐the‐art understanding is articulated about how the dynamic voltage stability should be interpreted in physical picture and treated in computation, emphasizing the potential importance of nonequilibrium reaction pathways. The constrained ensemble computational approach is further applied across most types of solid‐state electrolytes to systematically evaluate and compare their dynamic stability voltage windows in response to the mechanical constriction effect. High‐throughput calculations are used to search for coating materials for different interfaces between sulfide, halide, and oxide electrolytes and typical cathode materials with enhanced dynamic voltage stability. A comparison with experiment is given to highlight the value of these computational predictions.

Wang, Yichao↗
DOE OSTI2020

A life cycle analysis (LCA) primer for the agricultural community

Consumer demand for sustainably produced agricultural products is increasing. One approach that can be used to evaluate and compare product sustainability is to conduct a life cycle analysis (LCA). The term LCA is broadly used to describe a suite of analytical resources and standardized methods. Life cycle analyses are a transdisciplinary tool which can and are used by all professions but work best when conducted by teams with diverse skills and backgrounds. The objective of this paper is to provide a primer on LCAs for the agricultural community and for LCA practitioners unfamiliar with agronomy. Agricultural LCAs can differ greatly because agricultural products have multiple end uses, complex socio-economic and environmental trade-offs, and can be generated using a variety of different practices, resources, and production systems. Through worldwide agricultural marketing, intricate agronomic supply chains and support systems have been developed to produce, store, and distribute agricultural products. In many situations, the production practices are not linked to the products consumers purchase. This limitation can be partially overcome by conducting an LCA, which is a systematic summation of the multiple environmental impacts associated with the production, use, and disposal of a product. However, the large number and types of analyses can make it difficult for non-practitioners and decision-makers to use and interpret LCA results. Finally, it is important for members of the agricultural community to be aware of these analyses and how they can be used and how they affect product markets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Systems Analysis and Optimization of Circular PET Packaging Supply Chains in the United States: Environmental and Socioeconomic Impacts

Many actions are underway at global, national, and local levels to address the plastic waste problem and transition toward a circular economy of plastics. Studies evaluating environmental and socioeconomic impacts of such a transition are lacking. Here, the purpose of this study is to conduct a national systems analysis of polyethylene terephthalate (PET) packaging supply chains in the United States. Material flow data was combined with environmental and socioeconomic indicators to evaluate and compare the sustainability of the linear PET packaging supply chain, current (2019) supply chain, and possible future circular supply chain options in the United States. Environmentally optimal circular US PET packaging material flows showed 31% and 38% savings of GHG emissions and energy demand, respectively, with a circularity of 77% when compared with a linear supply chain. Additionally, the environmentally optimal system showed higher employment (29%) and wages (31%) than a linear system, but with a 5% decrease in revenue generation. A socioeconomically optimal circular PET supply chain showed increased employment (by 52%), wages (by 67%), and revenues (by 1%), with a circularity of 59% when compared with the linear system. However, it showed 14% higher GHG emissions than a linear system, indicating a trade-off between environmentally and socioeconomically optimal circular PET packaging systems. Overall, linear-to-circular material flow transition may not necessarily lead to increased revenues and decreased environmental impacts of the entire system, but it does benefit society due to increased employment and wages. Future systems analysis work should focus on improving data quality for environmental and socioeconomic dimensions.

PET↗
DOE OSTI2020

Seasonal grassland productivity forecast for the U.S. Great Plains using Grass–Cast

Every spring, ranchers in the drought-prone U.S. Great Plains face the same difficult challenge —trying to estimate how much forage will be available for livestock to graze during the upcoming summer grazing season. To reduce this uncertainty in predicting forage availability, we developed an innovative new grassland productivity forecast system, named Grass-Cast, to provide science-informed estimates of growing season above ground net primary production (ANPP). Grass-Cast uses over 30 yr of historical data including weather and the satellite-derived normalized vegetation difference index (NDVI)—combined with ecosystem modeling and seasonal precipitation forecasts—to predict if rangelands in individual counties are likely to produce below-normal, near-normal, or above-normal amounts of grass biomass (lbs/ac). Grass-Cast also provides a view of rangeland productivity in the broader region, to assist in larger scale decision-making—such as where forage resources for grazing might be more plentiful if a rancher’s own region is at risk of drought. Grass-Cast is updated approximately every two weeks from April through July. Each Grass-Cast forecast provides three scenarios of ANPP for the upcoming growing season based on different precipitation outlooks. Near real-time 8-d NDVI can be used to supplement Grass-Cast in predicting cumulative growing season NDVI and ANPP starting in mid-April for the Southern Great Plains and mid-May to early June for the Central and Northern Great Plains. Here, we present the scientific basis and methods for Grass-Cast along with the county-level production forecasts from 2017 and 2018 for ten states in the U.S. Great Plains. The correlation between early growing season forecasts and the end-of growing season ANPP estimate is >50% by late May or early June. In a retrospective evaluation, we compared Grass-Cast end-of-growing season ANPP results to an independent dataset and found that the two agreed 69% of the time over a 20-yr period. Although some predictive tools exist for forecasting upcoming growing season conditions, none predict actual productivity for the entire Great Plains. The Grass-Cast system could be adapted to predict grassland ANPP outside of the Great Plains or to predict perennial biofuel grass production.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Regional Earthquake Ground Motion Simulations for Southern California With EQSIM: Insights From the 2008 Chino Hills, 2024 Highland Park, and 2021 Carson Earthquakes

This study presents physics-based, 3D simulations using the EQSIM framework for several earthquakes in the Los Angeles region. The primary objective was to assess the ability of deterministic physics-based ground motion simulations to reproduce the observed motions from historical events. The selected events included the mathematical equation M w 5.4 2008 Chino Hills, the mathematical equation M w 4.4 2024 Highland Park, and the mathematical equation M w 4.3 2021 Carson events. The simulated motions were evaluated by comparing the recorded and simulated seismograms, as well as the Fourier amplitude spectra, across multiple seismic stations. The SCEC 3D velocity model, CVM-S4.26.M01, was used to represent the regional geology, and ground motion simulations were carried out with a resolution of up to 5 Hz. The results indicate that the simulated motions captured the recorded motions up to approximately 4 Hz. While careful iterations regarding source parameters and corner frequencies were required, and, for the case of the Highland Park event, some of the near-source stations had relatively low accuracy, the present study established a positive step toward the utilization of physics-based simulations in practical applications. The computational efficiencies exhibited by EQSIM, especially on GPU clusters, further supported this assertion, as wall-clock times of simulations involving more than 10 billion grid points were as low as mathematical equation minutes. This permits ensemble simulations for a considered scenario event so that modeling uncertainties (e.g., source and geology) can be bracketed.

EQSIM↗
DOE OSTI2021

Establishment of time‐resolved fluoroimmunoassay of IgG4 based on magnetic microspheres

Abstract Background The abnormal increase in serum IgG4 level is an important clinical symptom of IgG4‐related disease (IgG4‐RD), and the detection of serum IgG4 level is a powerful tool for the diagnosis of IgG4‐RD. This study was conducted to establish a simple and rapid immunoassay for the determination of human serum IgG4 levels. Methods Based on the competition method, a novel immunoassay was established for the determination of human serum IgG4 using a combination of time‐resolved fluoroimmunoassay (TRFIA) and magnetic microspheres. IgG4 was coupled with magnetic microspheres and competed with IgG4 in the samples to bind the Eu 3+ ‐labeled anti‐IgG4 antibody. The immunocomplex was separated and washed in a magnetic field, and the fluorescence counts were measured according to the number of dissociated europium ions. Results The analytical sensitivity of IgG4‐TRFIA based on magnetic microspheres was 0.006 g/L, and the detection range was 0.006–20 g/L under optimal conditions. The precision, recovery, and specificity of this immunoassay were demonstrated to be acceptable. The clinical application of IgG4‐TRFIA based on magnetic microspheres was evaluated and compared with that of immunonephelometry. The results showed that the two detection methods had a good correlation, with a correlation coefficient of .9871. Conclusion IgG4‐TRFIA based on magnetic microspheres has the advantages of high sensitivity, wide detection range, and short analysis time and has the potential to become a useful tool for the diagnosis of IgG4‐RD.

Wu, Qingqing↗
DOE OSTI2020

A New Estimator to Correct for Bias from Tag Rate Expansion on Natural-Origin Fish Attributes in Mixed-Stock Analysis Using Parentage-Based Tagging

Abstract In fisheries where hatchery- and natural-origin conspecifics occur as mixed stocks, it is often important to estimate both the natural-origin proportion of the mixture and the composition of attributes within the natural-origin portion (e.g., genetic stock, sex, and age-class). These estimates are facilitated by parentage-based tagging, which allows large numbers of hatchery fish to be efficiently tagged and later identified. When tag rates are less than 100%, the untagged fish in the mixture include both untagged hatchery fish and natural-origin fish. Unbiased estimation of the abundance and attribute composition of the natural-origin portion requires an estimator that accounts for tag rates. Two estimators are described: one “accounting-style” estimator similar to previously described approaches and one maximum likelihood method. These estimators were evaluated and compared using simulations mimicking estimation of the composition of fish migrating past a dam. The two estimators performed similarly at reducing bias when tag rates were high, but the maximum likelihood method had smaller mean square error when tag rates were low. We provide an R package to allow usage of this estimator in a wide variety of fisheries applications.

Delomas, Thomas A. (ORCID:000000015154759X)↗
DOE OSTI2022

Evaluation of bifacial module technologies with combined–accelerated stress testing

In view of the increasing interest and market share of bifacial cells and modules, suitable substrates such as glass and transparent backsheets along with ethylene vinyl acetate (EVA) and polyolefin elastomer (POE) encapsulants were examined in combined-accelerated stress testing (C-AST) to evaluate and compare degradation modes. Testing with both monofacial and bifacial cells, we found glass-glass modules with monofacial cells led to greater grid finger breakage than those with polymeric backsheets. Furthermore, this is attributed to previous X-ray topography and modeling work showing higher stress in cells and interconnections in glass-glass modules than glass-backsheet modules. Consistent with the objectives of C-AST, which stresses modules at levels corresponding to the limits seen in the natural environment, we observed the UV-fluorescence signatures of modules tested in C-AST (considering the degradation associated with developing chromophores, moisture penetration and photobleaching effects) to be like those in fielded modules, more so than other chamber stress testing implemented for comparison. We found light-induced degradation (LID) in module types with regenerated (inactive) cells with C-AST, suggesting the possibility of LID destabilization in some field conditions. We could also distinguish potential-induced degradation (PID) on the back of the bifacial passivated emitter and rear cells (PERC) in C-AST. Confirming with ex-situ tests, we found polarization-type PID most prevalent in glass-glass modules with EVA as would be anticipated considering the greater leakage current through such module encapsulation. Unlike PID tests performed in the dark, which can lead to false positive PID test results, field-representative illumination is experienced by the modules on the front and back side while –1200 V system voltage is applied in C-AST, supporting the conclusion that this module type with glass-glass construction would be susceptible to PID in the field.

14 SOLAR ENERGY↗
DOE OSTI2022

Total Mercury Analysis of Radioactive Waste Containing Multiple Mercury Species

In this work, a direct mercury analyzer (DMA) was used to analyze total mercury in radioactive waste samples containing methylmercury and other forms of mercury including Hg o (elemental) together with inorganic ionic mercury species and complexes. These samples were also analyzed using Cold Vapor Atomic Absorption Spectroscopy (CVAAS) and/or Inductively Coupled Plasma Mass Spectroscopy (ICMS). Comparative statistical evaluation of the results from spike solutions/simulants, liquid radioactive waste samples, and interlaboratory performance test samples demonstrated that the various methods generated accurate and/or equivalent total mercury data and equivalent precision (2σ ± < 20%). Triplicate total mercury analysis of an exemplar radioactive waste resulted in an average value of 54.1 mg/L (as Hg) using CVAAS, 55.1 mg/L using ICPMS and 56.0 mg/L using DMA. A primary advantage of the DMA in a radioactive environment is avoiding multi-step, labor-intensive, time-consuming and waste-producing sample preparation protocols needed for CVAAS and ICPMS. DMA was determined to be the preferred method for measuring total mercury in the Savannah River National Laboratory (SRNL) radioanalytical laboratory based on analytical performance combined with ease of use in a radiological containment unit.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Biomarkers of oxidative stress, diet and exercise distinguish soldiers selected and non-selected for special forces training

The metabolomic profiles of Soldiers entering the U.S. Special Forces Assessment and Selection course (SFAS) have not been evaluated. To compare pre-SFAS blood metabolomes of Soldiers selected during SFAS versus those not selected, and explore the relationships between the metabolome, physical performance, and diet quality. Fasted blood samples and food frequency questionnaires were collected from 761 Soldiers prior to entering SFAS to assess metabolomic profiles and diet quality, respectively. Physical performance was assessed throughout SFAS. Between-group differences (False Discovery Rate < 0.05) in 108 metabolites were detected. Selected candidates had higher levels of compounds within xenobiotic, pentose phosphate, and corticosteroid metabolic pathways, while non-selected candidates had higher levels of compounds potentially indicative of oxidative stress (i.e., sphingomyelins, acylcarnitines, glutathione, amino acids). Multiple compounds higher in non-selected versus selected candidates included: 1-carboxyethylphenylalanine; 4-hydroxy-nonenal-glutathione; α-hydroxyisocaproate; hexanoylcarnitine; sphingomyelin and were associated with lower diet quality and worse physical performance. Candidates selected during SFAS had higher pre-SFAS levels of circulating metabolites that were associated with resistance to oxidative stress, higher physical performance and higher diet quality. In contrast, non-selected candidates had higher levels of metabolites potentially indicating elevated oxidative stress. These findings indicate that Soldiers who were selected for continued Special Forces training enter the SFAS course with metabolites associated with healthier diets and better physical performance. Additionally, the non-selected candidates had higher levels of metabolites that may indicate elevated oxidative stress, which could result from poor nutrition, non-functional overreaching/overtraining, or incomplete recovery from previous physical activity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

The Influence of Residual Stress on Fatigue Crack Growth Rates in Stainless Steel Processed by Different Additive Manufacturing Methods

The properties and microstructure of Type 304L stainless steel produced by two additive manufacturing (AM) methods—directed energy deposition (DED) and powder bed fusion (PBF)—are evaluated and compared. Localized heating and steep temperature gradients of AM processes lead to significant residual stress and distinctive microstructures, which may be process-specific and influence mechanical behavior. Test data show that materials produced by DED and PDF have small differences in tensile strengths but clear differences in residual stress and microstructural features. Measured fatigue crack growth rates (FCGRs) for cracks propagating parallel to and perpendicular to the build directions differ between the two AM materials. To separate the influences of residual stress and microstructure, K-control test procedures with decreasing and constant stress intensity factor ranges are used to measure FCGRs in the near-threshold regime (crack growth rates ≤ 1 × 10 −8 m/cycle). Residual stress is quantified by the residual stress intensity factor, K res , measured by the online crack compliance method. Correcting the FCGR data for differences in K res brings results for specimens of the two AM materials into agreement with each other and with results for wrought specimens, when the latter are corrected for crack closure. Differences in microstructure and tensile strength have an insignificant influence on FCGRs in these tests.

additive manufacturing↗
DOE OSTI2021

Machine-Learning-based Algorithms for Automated Image Segmentation Techniques of Transmission X-ray Microscopy (TXM)

Four state-of-the-art Deep Learning-based Convolutional Neural Networks (DCNN) were applied to automate the semantic segmentation of a 3D Transmission x-ray Microscopy (TXM) nanotomography image data. The standard U-Net architecture as baseline along with UNet++, PSPNet, and DeepLab v3+ networks were trained to segment the microstructural features of an AA7075 micropillar. A workflow was established to evaluate and compare the DCNN prediction dataset with the manually segmented features using the Intersection of Union (IoU) scores, time of training, confusion matrix, and visual assessment. Comparing all model segmentation accuracy metrics, it was found that using pre-trained models as a backbone along with appropriate training encoder-decoder architecture of the Unet++ can robustly handle large volumes of x-ray radiographic images in a reasonable amount of time. This opens a new window for handling accurate and efficient image segmentation of in situ time-dependent 4D x-ray microscopy experimental datasets.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Direct Fabrication of Vertically Stacked Double Barrier Tunnel Junctions Based on Graphene and h-BN

Direct manufacturing of two-dimensional material-based double barrier (DB) tunnel junctions, based on a lithography-free approach was developed. Graphene/h-BN/Graphene/h-BN/Graphene devices were deposited on Si/SiO2 substrates by employing a plasma enhanced chemical vapor deposition technique in a sequential manner. DB tunneling junctions with varying barrier widths (by varying the thickness of the second graphene layer) were studied. Samples were characterized using Raman, Atomic Force Microscopy and X-ray photoemission spectroscopy. The I–V characteristics of tunneling current showed resonant tunneling behavior at room temperature with a negative differential conductance. The behavior could be explained with quantum mechanical double barrier tunneling model in which analytic solutions to Schrödinger’s equation were obtained in each region of the system. Resonances in transmission probability coefficient for varying barrier widths were evaluated and compared with the experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Temperature-dependent mechanical properties and crystal plasticity parameters for additively manufactured Haynes-214 alloy: Experiments and numerical modeling

Our experimental mechanical testing data demonstrated that the additively manufactured (AM) laser powder bed fusion (L-PBF) Haynes-214 alloy exhibits non-linear mechanical properties as the temperature rises from ambient to 870 °C. Crystal plasticity (CP) simulations provide an effective approach to gaining deeper insights into microstructure-property linkages under thermomechanical loading. This method can reduce the need for costly high-temperature mechanical testing while accounting for the effects of crystallographic texture and grain morphology on the mechanical behavior of AM materials. However, calibrating a CP model is time-consuming because individual simulations are computationally expensive and hundreds (or more) of iterations over parameter sets may be required. To address this issue, we have designed a machine learning-differential evolution (ML-DE) CP framework that can accurately interpolate the tensile properties of AM L-PBF Haynes-214 alloy across a wide temperature range from ambient to 870 °C, with minimal reliance on experimental data. The framework uses electron backscatter diffraction (EBSD) measurements to generate statistically equivalent microstructural volume elements to serve as inputs to the CP modeling framework. Stress–strain curves were generated from 1000 CP simulations, which serve as the training data set for the three ML regression algorithms explored: linear, extra-trees, and multi-layer perceptron. These three regression models were independently evaluated to compare their efficiency and identify the most suitable algorithm for the given problem. Results revealed that the extra-trees ML regressor outperforms the other models in both qualitative and quantitative aspects with an R 2 of 0.98. Subsequently, the differential evolution optimization approach is employed to calibrate the ML-based CP material parameters with experimental results obtained at various temperatures. Finally, temperature-dependent CP material parameters are formulated. The effectiveness and efficiency of the designed framework are validated through comparison with experimental results, demonstrating a high degree of agreement. These calibrated parametric constitutive equations enable further use of the CP model to study the deformation behavior of this alloy under a wide range of thermo-mechanical loading conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Californium-252 production at the High Flux Isotope Reactor - I: Validation study using campaign data

This paper presents a series of 252 Cf production validation and code-to-code comparison studies performed based on data from the production campaigns at the High Flux Isotope Reactor (HFIR). These studies support efforts to convert HFIR from using highly enriched uranium (HEU) fuel to low-enriched uranium (LEU) fuel. HFIR must maintain its world-class performance and missions following this conversion, and because 252 Cf is a vital neutron-emitting radioisotope used for a variety of high-impact applications (e.g., reactor startup, cancer treatment), the ability to efficiently produce 252 Cf must be preserved. In this work, the HFIRCON, Shift, ORIGEN, and TCOMP codes were deployed, and several sets of data libraries were investigated to better understand the calculation codes and the data biases. As-loaded target composition data, as-run irradiation history data, and post-irradiation measurements from recent multi-cycle irradiation campaigns of the HEU core were used to validate and determine methodology biases. Further, the findings demonstrated a good agreement, with results falling within 3 standard deviations of measurements. This paper lays the ground work for the second paper, which evaluates and compares 252 Cf production and safety metrics with the HEU core and a proposed LEU core.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2025

Differentiable hybrid neural network approach for enhancing reactor dynamics simulations

Reactor dynamics simulations provide essential insights into the time-dependent behavior of nuclear reactors under various operating conditions. However, high-fidelity simulations can be computationally intensive, requiring significant computational resources. Here, to address this challenge, this study employs a differentiable hybrid model that utilizes neural networks as a corrector to enhance the performance of a low-fidelity simulation, aligning its predictions with those of a high-fidelity simulation. Low-fidelity and high-fidelity simulations were obtained by adjusting the mesh size in the System Dynamics Analysis Tool. The differentiable hybrid model was trained in two approaches: time-step-wise and sequence-wise. It was then applied to simulate various transients in a molten salt reactor. Its performance was evaluated by comparing its responses to transients against those of the high-fidelity simulation. An additional approach was performed using a data-driven model to correct the low-fidelity simulation. In comparison, the differentiable hybrid model showed significant improvements in transient prediction, effectively addressing the limitations of the low-fidelity simulations. The results highlighted the robustness of the differentiable hybrid model in both training approaches. It delivered simulations that were at least 3.8 times faster than high-fidelity models. In the time-step-wise approach, it achieved at least a 39% improvement in accuracy. In the sequence-wise approach, it showed at least an 81% accuracy improvement over the full transient. This approach offers a promising path for improving computational efficiency without compromising accuracy in nuclear reactor simulations, making it suitable for real-time digital twin applications.

42 - ENGINEERING↗