Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COLLIDER MODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

A magneto-sensitive skin for robots in space

The development of a robot arm proximity sensing skin that can sense intruding objects is described. The purpose of the sensor would be to prevent the robot from colliding with objects in space including human beings. Eventually a tri-mode system in envisioned including proximity, tactile, and thermal. To date the primary emphasis was on the proximity sensor which evolved from one based on magneto-inductive principles to the current design which is based on a capacitive-reflector system. The capacitive sensing element, backed by a reflector driven at the same voltage and in phase with the sensor, is used to reflect field lines away from the grounded robot toward the intruding object. This results in an increased sensing range of up to 12 in. with the reflector on compared with only 1 in. with it off. It is believed that this design advances the state-of-the-art in capacitive sensor performance.

Chauhan, D. S.↗

Higher Order Mode Heating Analysis for the ILC Superconducting Linacs

The superconducting cavities and interconnects in the 11 km long linacs of the International Linear Collider (ILC) are designed to operate at 2K, where cooling costs are very expensive. It is thus important to minimize cryogenic heat loads. In addition to an unavoidable static load and the dynamic load of the fundamental 1.3 GHz accelerating rf, a further heat source is presented by the higher order mode (HOM) power deposited by the beam. Such modes will be damped by specially designed HOM couplers attached to the cavities (for trapped modes), and by ceramic dampers at 70K that are located between the eight or nine cavity cryomodules (for propagating modes). Brute force calculation of the higher frequency modes excited in a string of cryomodules is limited by computing capacity (see, e.g. [1]). M. Liepe has calculated {approx} 400 longitudinal TM modes in 3 superconducting cavities plus absorbers, up to 8 GHz [2]. Joestingmeier, et al., have used a ray tracing calculation to find the effect at higher frequencies, specifically in the range of tens of GHz and above [3]. In this report we present a scattering matrix approach, which we apply to an rf unit comprising 26 cavities and 3 absorbers. We perform calculations at sample frequencies (up to 20 GHz) to predict the effectiveness of the ceramic dampers in limiting HOM heat deposition at 2K.

43 PARTICLE ACCELERATORS↗

Next generation HOM-damping

Research and development for superconducting radio-frequency cavities has made enormous progress over the last decades from the understanding of theoretical limitations to the industrial mass fabrication of cavities for large-scale particle accelerators. Key technologies remain hot topics due to continuously growing demands on cavity performance, particularly when in pursuit of high quality beams at higher beam currents or higher luminosities than currently achievable. This relates to Higher Order Mode (HOM) damping requirements. Meeting the desired beam properties implies avoiding coupled multi-bunch or beam break-up instabilities depending on the machine and beam parameters that will set the acceptable cavity impedance thresholds. The use of cavity HOM-dampers is crucial to absorb the wakefields, comprised by all beam-induced cavity Eigenmodes, to beam-dynamically safe levels and to reduce the heat load at cryogenic temperature. Cavity damping concepts may vary, but are principally based on coaxial and waveguide couplers as well as beam line absorbers or any combination. Next generation Energy Recovery Linacs and circular colliders call for cavities with strong HOM-damping that can exceed the state-of-the-art, while the operating mode efficiency shall not be significantly compromised concurrently. This imposes major challenges given the rather limited damping concepts. A detailed survey of established cavities is provided scrutinizing the achieved damping performance, shortcomings, and potential improvements. The scaling of the highest passband mode impedances is numerically evaluated in dependence on the number of cells for a single-cell up to a nine-cell cavity, which reveals the increased probability of trapped modes. This is followed by simulations for single-cell and five-cell cavities, which incorporate multiple damping schemes to assess the most efficient concepts. The usage and viability of on-cell dampers is elucidated for the single-cell cavity since it can push the envelope towards quasi HOM-free operation suited for next generation storage and collider rings. Geometrical end-cell shape alterations for the five-cell cavity with already efficient mode damping are discussed as a possibility to further lower specific high impedance modes. Lastly, the findings are eventually put into relation with demanding impedance instability thresholds in future collider rings.

43 PARTICLE ACCELERATORS↗

Search for B + → e + ν e and B + → μ + ν μ decays using hadronic tagging

We present a search for the rare leptonic decays B + → e + ν e and B + → μ + ν μ , using the full Υ(4S) data sample of 772 × 10 6 BB¯ pairs collected with the Belle detector at the KEKB asymmetric-energy e + e – collider. One of the B mesons from the Υ(4S) → BB¯ decay is fully reconstructed in a hadronic mode, while the recoiling side is analyzed for the signal decay. Here, we find no evidence of a signal in any of the decay modes. Upper limits of the corresponding branching fractions are determined as B(B + → e + ν e ) < 3.5 × 10 –6 and B(B + → μ + ν μ ) < 2.7 × 10 –6 at 90% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Higgs boson flavor-changing neutral coupling and h{yields}t*c decay at a muon collider

We study the discovery potential of the flavor-changing neutral coupling (FCNC) htc of the Higgs boson and the top quark through the rare tree-body decay h{yields}Wbc at muon colliders for a light Higgs boson with mass 114{<=}m{sub h{<=}}145 GeV. This decay mode may compete with the standard model (SM) background induced by the hWW coupling in some models with a tree-level htc coupling and with models that predict this coupling at the one-loop level in the range 10{sup -2}-10{sup -1}. A future muon collider could test the scalar FCNC decay t{yields}hc via Higgs decay h{yields}t*c{yields}bW{sup +}c down to values of the coupling g{sub tc}=0.5[that are equivalent to BR(t{yields}hc){approx}5x10{sup -3}]. The LHC could probe values of g{sub tc} 1 order of magnitude smaller, unless other processes beyond the SM appear that through intense multijet activity may clutter the t{yields}hc signal.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Higgs boson search sensitivity in the H{yields}WW dilepton decay mode at {radical}(s)=7 and 10 TeV

Prospects for discovery of the standard model Higgs boson are examined at center-of-mass energies of 7 and 10 TeV at the CERN Large Hadron Collider. We perform a simulation of the signal and principal backgrounds for Higgs boson production and decay in the W{sup +}W{sup -} dilepton mode, finding good agreement with the ATLAS and CMS collaboration estimates of signal significance at 14 TeV for Higgs boson masses near m{sub H}=160 GeV. At the lower energy of 7 TeV, using the same analysis cuts as these collaborations, we compute expected signal sensitivities of about 2 standard deviations ({sigma}'s) at m{sub H}=160 GeV in the ATLAS case, and about 3.6{sigma} in the CMS case for 1 fb{sup -1} of integrated luminosity. Integrated luminosities of 8 fb{sup -1} and 3 fb{sup -1} are needed in the ATLAS case at 7 and 10 TeV, respectively, for 5{sigma} level discovery. In the CMS case, the numbers are 2 fb{sup -1} and 1 fb{sup -1} at 7 and 10 TeV. Our different stated expectations for the two experiments arise from the more restrictive analysis cuts in the CMS case and from the different event samples in the two cases. Recast as exclusion limits, our results show that with 1 fb{sup -1} of integrated luminosity at 7 TeV, the LHC may be able to exclude m{sub H} values in the range 160 to 180 GeV provided no signal is seen.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Update on coaxial coupling scheme for International Linear Collider-type cavities

This paper reports on our efforts to develop a flangeable coaxial coupler for both higher order mode and fundamental coupling for nine-cell ILC-type cavities, which were designed in the early 1990’s for pulsed operation with a duty factor less than 1%. The design of the coupler has been done in such a way that the rf magnetic flux B at the flange connection was minimized and only a field of <5 mT would be present for an operation at an accelerating field E acc ~36 MV/m (B~150 mT) in the cavity. Even though we achieved reasonably high Q values at low field, the cavity/coupler combination was limited in the cw mode to only ~7 MV/m, where a thermally initiated degradation occurred. We believed that this limitation was caused by poor cooling of the shorting plate and inner tube in the coaxial coupler; therefore, we have improved the cooling conditions by initially drilling radial cooling channels every 30 degrees, then every 15 degrees into the shorting plate and eventually removing the “bridges” between the channels. This paper reports on our experiences with the modified coaxial coupler under cw and pulsed conditions.

43 PARTICLE ACCELERATORS↗

Measurements of branching fraction ratios and CP asymmetries in B+/- ->D_CP K+/- decays in hadron collisions

We reconstruct B{sup {+-}} {yields} DK{sup {+-}} decays in a data sample collected by the CDF II detector at the Tevatron collider corresponding to 1 fb{sup -1} of integrated luminosity. We select decay modes where the D meson decays to either K{sup -}{pi}{sup +} (flavor eigenstate) or K{sup -}K{sup +}, {pi}{sup -}{pi}{sup +} (CP-even eigenstates), and measure the direct CP asymmetry A{sub CP+} = 0.39 {+-} 0.17(stat) {+-} 0.04(syst), and the double ratio of CP-even to flavor eigenstate branching fractions R{sub CP+} = 1.30 {+-} 0.24(stat) {+-} 0.12(syst). These measurements will improve the determination of the CKM angle {gamma}. They are performed here for the first time using data from hadron collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

BNL 56 MHz HOM Damper Prototype Fabrication at JLab

A prototype Higher-Order Mode (HOM) Damper was fabricated at JLab for the Relativistic Heavy-Ion Collider's (RHIC) 56 MHz cavity at Brookhaven National Laboratory (BNL). Primarily constructed from high RRR Niobium and Sapphire, the coaxial damper presented significant challenges in electron-beam welding (EBW), brazing and machining via acid etching. The results of the prototype operation brought about changes in the damper design, due to overheating braze alloys and possible multi-pacting. Five production HOM dampers are currently being fabricated at JLab. This paper outlines the challenges faced in the fabrication process, and the solutions put in place.

36 MATERIALS SCIENCE↗

Measurements of branching fraction ratios and CP asymmetries in B{sup {+-}{yields}D}{sub CP}K{sup {+-}}decays in hadron collisions

We reconstruct B{sup {+-}{yields}D}K{sup {+-}}decays in a data sample collected by the CDF II detector at the Tevatron collider corresponding to 1 fb{sup -1} of integrated luminosity. We select decay modes where the D meson decays to either K{sup -{pi}+} (flavor eigenstate) or K{sup -}K{sup +}, {pi}{sup -{pi}+} (CP-even eigenstates), and measure the direct CP asymmetry A{sub CP+}=0.39{+-}0.17(stat){+-}0.04(syst), and the double ratio of CP-even to flavor eigenstate branching fractions R{sub CP+}=1.30{+-}0.24(stat){+-}0.12(syst). These measurements will improve the determination of the Cabibbo-Kobayashi-Maskawa angle {gamma}. They are performed here for the first time using data from hadron collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Functional Requirements on the Design of the Detectors and the Interaction Region of an e e- Linear Collider with a Push-Pull Arrangement of Detectors

The Interaction Region of the International Linear Collider is based on two experimental detectors working in a push-pull mode. A time efficient implementation of this model sets specific requirements and challenges for many detector and machine systems, in particular the IR magnets, the cryogenics and the alignment system, the beamline shielding, the detector design and the overall integration. This paper attempts to separate the functional requirements of a push pull interaction region and machine detector interface from any particular conceptual or technical solution that might have been proposed to date by either the ILC Beam Delivery Group or any of the three detector concepts. As such, we hope that it provides a set of ground rules for interpreting and evaluating the MDI parts of the proposed detector concept's Letters of Intent, due March 2009. The authors of the present paper are the leaders of the IR Integration Working Group within Global Design Effort Beam Delivery System and the representatives from each detector concept submitting the Letters Of Intent.

43 PARTICLE ACCELERATORS↗

Beam Dynamics Challenges of a Far-Future ERL-Based Collider - The Ghost Collider

Beam Dynamics Challenges of a Far-Future ERL-Based Collider - The Ghost Collider In a recent paper, Valery Telnov proposed a linear collider based on twin axis cavities [1]. In a subsequent presentation, Erk Jensen proposed a modification with intra-bucket energy recovery [2], which eliminates higher order mode excitation. Interestingly, this means that there is no need for large aperture SRF cavities and high-power HOM couplers. The Ghost Collider adopts these ideas, and adds the concept of four-beam collisions (initially proposed by Joel LeDuff [3]) to remove beam-beam interactions and disruption. This concept brings up a series of new beam dynamics problems which make optimization of the parameters difficult. The presentation will describe the concept, which has a series of beam-dynamics challenges to be solved before the concept can advance. [1] V.I. Telnov, JINST 16 (2021) no.12, P12025 [2] E. Jensen https://indico.cern.ch/event/1040671/?view=nicecompact [3] Status Report on D. C. I, The Orsay Storage Ring Group, IEEE Transactions on Nuclear Science, Vol. NS-26, No.3, June 1979

Hutton, Andrew↗

Search for Invisible Decays of a Higgs Boson Produced in Association with a Z Boson in ATLAS

A search for evidence of invisible-particle decay modes of a Higgs boson produced in association with a Z boson at the Large Hadron Collider is presented. No deviation from the standard model expectation is observed in 4.5 fb -1 (20.3 fb -1 ) of 7 (8) TeV pp collision data collected by the ATLAS experiment. Assuming the standard model rate for ZH production, an upper limit of 75%, at the 95% confidence level is set on the branching ratio to invisible-particle decay modes of the Higgs boson at a mass of 125.5 GeV. The limit on the branching ratio is also interpreted in terms of an upper limit on the allowed dark matter-nucleon scattering cross section within a Higgs-portal dark matter scenario. Within the constraints of such a scenario, the results presented in this Letter provide the strongest available limits for low-mass dark matter candidates. Limits are also set on an additional neutral Higgs boson, in the mass range 110 < m H < 400 GeV, produced in association with a Z boson and decaying to invisible particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Probing the topcolor-assisted technicolor model via the single t-quark production at the CERN LHC

The single t-quark production in proton-proton collisions can proceed through three distinct processes: tq, tb, tW productions. With the running of the Large Hadron Collider (LHC) at CERN, it has good potential to measure each single t-quark production mode. The topcolor-assisted technicolor (TC2) model, one of the promising dynamical theories, predicts some new particles at the several hundred GeV scale: three top-pion bosons ({pi}{sub t}{sup {+-}}, {pi}{sub t}{sup 0}) and one top-Higgs boson (h{sub t}). These particles are regarded as the typical feature of the TC2 model and can contribute to some processes. In this paper, we systematically study the contribution of the TC2 model to the single t-quark production at the Hadron colliders, especially at the LHC. The TC2 model can contribute to the cross section of the single t-quark production in two different ways. First, the existence of the top pions and top Higgs can modify the Wtb coupling via their loop contributions, and such modification can cause the correction to the cross sections of all three production modes. Our study shows that this kind of correction is negative and very small in all cases. Thus it is difficult to observe such a correction even at the LHC. On the other hand, there exist the tree-level flavor-changing (FC) couplings in the TC2 model which can also contribute to the cross sections of the tq and tb production processes. The resonant effect can greatly enhance the cross sections of the tq and tb productions. The first evidence of the single t-quark production has been reported by the D0 collaboration and the measured cross section for the single t-quark production of {sigma}(pp{yields}tb+X,tqb+X) is compatible at the 10% level with the standard model prediction. Because the light top pion can make a great contribution to the tb production, the top-pion mass should be very large in order to make the predicted cross section in the TC2 model be consistent with the Tevatron experiments. More detailed information about the top-pion mass and the FC couplings in the TC2 model should be obtained with the running of the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

B Physics Results from the Tevatron: Lifetimes and Rare Decays

With data samples of up to 2 fb{sup -1} of p{bar p} interactions at {radical}s = 1960 GeV, the CDF and D0 experiments are beginning to make precision measurements of the lifetime of bottom hadrons not produced in e{sup +}e{sup -} colliders operating at the {Upsilon}(4S) and set limits on the branching ratios of many decay modes that are predicted to be rare or forbidden under the standard model. Both sets of measurements are providing limits on physics beyond the standard model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tracking down hyper-boosted top quarks

The identification of hadronically decaying heavy states, such as vector bosons, the Higgs, or the top quark, produced with large transverse boosts has been and will continue to be a central focus of the jet physics program at the Large Hadron Collider (LHC). At a future hadron collider working at an order-of-magnitude larger energy than the LHC, these heavy states would be easily produced with transverse boosts of several TeV. At these energies, their decay products will be separated by angular scales comparable to individual calorimeter cells, making the current jet substructure identification techniques for hadronic decay modes not directly employable. In addition, at the high energy and luminosity projected at a future hadron collider, there will be numerous sources for contamination including initial- and final-state radiation, underlying event, or pile-up which must be mitigated. We propose a simple strategy to tag such "hyper-boosted" objects that defines jets with radii that scale inversely proportional to their transverse boost and combines the standard calorimetric information with charged track-based observables. By means of a fast detector simulation, we apply it to top quark identification and demonstrate that our method efficiently discriminates hadronically decaying top quarks from light QCD jets up to transverse boosts of 20 TeV. Lastly, our results open the way to tagging heavy objects with energies in the multi-TeV range at present and future hadron colliders.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The design of the fundamental mode damper and the HOM dampers for the 56 MHz SRF cavity

A 56 MHz Superconducting RF cavity is under development for the Relativistic Heavy Ion Collider (RHIC) aiming at luminosity enhancement The 56 MHz SRF cavity can adiabatically rebucket the beam from the 28 MHz accelerating cavities, provide shorter bunches and significantly enhance the luminosity. The 56 MHz SRF cavity will be turned on at store, therefore, the fundamental mode should be damped while the beam is injected and accelerated. The feature requires a fundamental mode damper (FD). The mechanical design of the FD is challenging since the fundamental mode damper has to be physically withdrawn while the cavity is turned on. This motion introduces a frequency change of the cavity. Since for stability the cavity frequency must be kept below the beam frequency in this phase, we chose a judicious axial placement of the FD to minimize the frequency shift. Various studies of the FD were done with prototype cavity tests and numerical simulations. The engineering issues were addressed. Higher-order mode (HOM) dampers are necessary for stable operation of RHIC with the 56 MHz SRF cavity. The physics study of the HOM dampers will be presented in the paper. Based on the stability criteria of the cavity, the HOMs are properly damped by having two HOM dampers. The fundamental mode is filtered out by a 5 element high pass filter. The HOMs were identified and the external Q factors were obtained from tests of the prototype cavity and compared to simulations with the CST Microwave Studio{reg_sign} program.

43 PARTICLE ACCELERATORS↗

Combination of searches for singly produced vectorlike top quarks in 𝑝⁢𝑝 collisions at $\sqrt{𝑠}$ =13 TeV with the ATLAS detector

A combination of searches for the single production of vectorlike top quarks (𝑇) is presented. These analyses are based on proton-proton collisions at $\sqrt{𝑠}$ = 13 TeV recorded in 2015–2018 with the ATLAS detector at the Large Hadron Collider, corresponding to an integrated luminosity of 139 fb −1 . The 𝑇 decay modes considered in this combination are into a top quark and either a Standard Model Higgs boson or a 𝑍 boson (𝑇 → 𝐻⁡𝑡 and 𝑇 → 𝑍⁢𝑡). The individual searches used in the combination are differentiated by the number of leptons (𝑒, 𝜇) in the final state. The observed data are found to be in good agreement with the Standard Model background prediction. Interpretations are provided for a range of masses and couplings of the vectorlike top quark for benchmark models and generalized representations in terms of 95% confidence level limits. For a benchmark signal prediction of a vectorlike top quark SU(2) singlet with electroweak coupling, 𝜅, of 0.5, masses below 2.1 TeV are excluded, resulting in the most restrictive limits to date.

Composite models↗