Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COERCIVE FORCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Effects of Mg Substitution on the Structural and Magnetic Properties of Ni{sub 0.2}Mg{sub x}Co{sub 0.8−x}Fe{sub 2}O{sub 4} Nanoparticle Ferrites

Sol-gel auto-combustion is a method of preparing ferrite by combining combustion with chemical gel. In this study, Ni-Mg-Co ferrite powders are prepared by coprecipitation method, and the nanocrystals of Ni{sub 0.2}Mg{sub x}Co{sub 0.8−x}Fe{sub 2}O{sub 4} are successfully synthesized. The structure and magnetic properties of undoped and Mg-substituted Ni-Co ferrite nanoparticles are systematically investigated. The methods used to characterize the prepared samples are X-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FTIR), and Vibrating sample magnetometry (VSM). The synthesized samples are confirmed by XRD analysis to form a single-phase cubic spinel structure with crystals between 48 and 50 nm. With the increase of Mg ion concentration, the lattice constant decreases. The results of FTIR spectroscopy indicated that a spinel structure was formed. Transmission electron microscopy (TEM) images show spherical cubic microcrystals in the samples. EDX analysis confirms that the synthesized ferrite is pure phase structure, and Mg{sup 2+} is successfully replaced. With the increase of Mg{sup 2+} ion content, the saturation magnetization and remanent magnetization decreased from 70.16 to 39.77 emu/g and 36.40 to 20.20 emu/g at room temperature, respectively. Meanwhile, the coercivity decreases from 1032.16 to 378.50 Oe by increasing Mg{sup 2+} concentration. This also indicates that the Mg-substituted Ni-Co nano-ferrite has a low magnetic of multi-ferric material. The increasing of peak height of dM/dH at H{sub m} indicates that the cubic spinel structure sample has good crystallinity and magnetic stability.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructural, Magnetic, and Nanoindentation Studies of the Ball-Milled Ti80Ni20 Alloy

Nanostructured Ti{sub 80}Ni{sub 20} material was elaborated by mechanical alloying from pure Ti and Ni powders in a planetary ball-mill P7 under argon atmosphere at ambient temperature. Morphological, microstructural, magnetic, and nanoindentation properties were studied using scanning electron microscopy, X-ray diffraction, magnetic measurements, and nanoindentation test. The morphological observations show the predominance of the welding phenomenon during the milling process. The Rietveld refinement of the X-ray diffraction pattern reveals, after 4 h of milling, the formation of the disordered hcp-Ti (Ni) solid solution in addition to elemental hcp-Ti and fcc-Ni. On further milling (20 h), the interdiffusion between Ti and Ni atoms is evidenced by the formation of disordered hcp-Ti (Ni) and fcc-Ni (Ti) solid solutions. The saturation magnetization and coercivity values are about of 159.8 emu/g and 80.79 Oe, respectively, after 20 h of milling. M{sub r}/M{sub s} ratio indicates the existence of small magnetic particles which are typically single domains (M{sub r}/M{sub s} 0.1–0.5) and/or multidomain (M{sub r}/M{sub s} < 0.1). Nanohardness values of the sintered powders fluctuates between 1.53 and 5.98 GPa while those of the elastic modulus varies in the range 130.73 to 164.53 GPa.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study on Magnetic Properties and Degradability of Gas Atomization Fe-Based (Fe-Si-B-P) Amorphous Powder

Fe-based amorphous materials have attracted extensive attention in the application of organic pollutant degradation due to their excellent chemical properties. In this work, a novel Fe-based (Fe-Si-B-P) amorphous powder prepared by gas atomization is employed to decompose azo dyes for wastewater treatment. Its crystalline structure, distribution of particle size, and soft magnetic properties are characterized. The experimental results show that the Fe-based (Fe-Si-B-P) powder is amorphous morphology which might bring many benefits for decomposing organics in waste water. The particle size of the micro-sized spheroidal powder distributes mainly from 10 to 50 μm, and most are about 17~19 μm. The magnetic properties are also investigated. Its saturation magnetization (M{sub S}) and coercivity (H{sub C}) are, respectively, 55 emu/g and 19.6 Oe, which present superb soft magnetic properties. Finally, we studied the degradability of the Fe-based amorphous powder by decomposing the methylene blue in waste water, and the results show that 0.05-g Fe-based amorphous powder can completely degrade the 50 ml methylene blue solution with the concentration of 3 × 10{sup −5} M within 15 min in weak acidic environment, which shows great degradability for wastewater treatment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Magnetic Properties of Co{sub 100−x}Pd{sub x} Thin Films Evaporated on Si (100) Substrate

The structural and magnetic properties of Co{sub 100−x}Pd{sub x} thin films grown under vacuum by physical vapor deposition (PVD) on Si (100) are reported. The thicknesses of the samples were measured with a DEKTAK 150 profilometer; chemical composition was analyzed by energy dispersive X-ray analyses (EDX). Microscopic characterizations of the films were done with X-ray diffraction (XRD) and we conclude that all the samples were polycristalline with an hcp structure. The hysteresis loops are performed by means of vibrating sample magnetometer (VSM) and we point up that all the samples present a planar ferromagnetic anisotropy. The saturation magnetization decreases as the palladium content increases and high values of the squareness up to 0.62 were measured. All these results are analyzed and correlated.

36 MATERIALS SCIENCE↗

Structural, Electrical, and Magnetic Properties of Ferrite-Reinforced PANI Composites

A Y-type hexagonal ferrite with chemical composition CaBaCo{sub 2}In{sub 0.5}Fe{sub 11.5}O{sub 22} was prepared by a sol-gel auto combustion technique. Y-ferrite/PANI nanocomposites were prepared by in situ polymerization of PANI with general formula CaBaCo{sub 2}In{sub 0.5}Fe{sub 11.5}O{sub 22} (1-x) + PANI (x) (x = 0.30, 0.50, 0.8, and 1) with nomenclature CF1, CF2, CF3, and P respectively. The samples were characterized by X-ray diffraction (XRD) and electrical and magnetic measurements. X-ray diffraction revealed that Y-type ferrite was successfully prepared in a single phase form. DC resistivity increases with increasing ferrite filler in nanocomposites due to large resistive behavior of ferrite in conducting polymer matrix. The dielectric constant, dielectric loss, and AC conductivity decreases with the increase of ferrite content. The dielectric is high due to interfacial polarization at low frequency, and it is low at high frequency following Maxwell-Wagner model. The coercivity increases with the decrease of ferrite filler content whereas saturation magnetization and remanence decreases which is due to random distribution of ferrite filler particles in PANI matrix. Due to large coercivity and low values of ε′ and ε″, the present samples may be useful in recording media and electromagnetic shielding.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Optical, Dielectric, and Magnetic Characteristics of Nd Ions Substituted BaFe{sub 11}(Sn{sub 0.5}Mg{sub 0.5}){sub x}O{sub 19} M-Type Hexaferrite via Co-precipitation

Nanoparticles (NPs) of barium hexaferrite were synthesized by a chemical co-precipitation technique in an aqueous solution with a nominal composition of BaFe{sub 11}(Sn{sub 0.5}Mg{sub 0.5}){sub 1−x}Nd{sub x}O{sub 19} (x = 0, 0.5, 1). XRD and FTIR analyses were performed to study the crystal structure of the magnetic powders (MPs) in order to obtain details on the hexaferrite structure. Grain morphology and elemental composition were assessed by SEM and EDS, respectively, and nano-sized hexagonal platelet-like structures in all MPs were demonstrated. All of the structural parameters such as “a”, “c”, V{sub (cell)} and D{sub x} have been altered with successful incorporation of Nd into hexagonal lattices, thereby the band gap E{sub g} first increased x ≤ 0.5 then decreased up to x = 1 (i.e., drawn via a Tauc plot) from 1.53–1.82 eV. The measurements of dielectric properties depict relaxation behavior at higher frequencies. The dielectric measurements increase with increased hexaferrite. Furthermore, the magnetic properties of all MPs were examined by VSM at room temperature (RT). The saturation magnetization (M{sub s}), remnant magnetization (M{sub r}), and coercivity (H{sub c}) were linearly decreased by the SnMg content, whereas an increasing trend appeared with the additional Nd content. However, the squareness ratio increased with an increase in the content (x). These outcomes make this substitution an excellent candidate for multiple applications such as optical, electrical-based devices, circulators, and recording materials. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low Temperature and Surfactant-Free Hydrothermal Synthesis of CoNi Nanoparticles: Structure, Microstructure, and Magnetic Properties

We report on the synthesis of Co{sub 30}Ni{sub 70} nanoparticles using hydrothermal method at low temperatures and short times (100 °C, 2 h) without any surfactant or external magnetic field. The effect of NaOH concentration on the crystal structure, microstructure, and magnetic properties of CoNi samples has been investigated by x-ray diffraction (XRD), scanning (SEM) and high-resolution transmission (HRTEM) electron microscopy, and vibrating sample magnetometry (VSM). From the Rietveld refinement of x-ray powder diffraction patterns, we have evidenced the coexistence of two phases with face-centered cubic (FCC) and hexagonal (HCP) crystal structures, being 12 nm and 3 nm, respectively, the values for the mean grain size of both phases. SEM images show that the basic microstructure is composed of quasi-spheres and a chain-like morphology appears with increasing the amount of NaOH. HRTEM images evidence the formation of such chains, and confirm the coexistence of FCC and HCP phases. The magnetic hysteresis loops show a clear dependence of the coercivity on the particle morphology indicating the role played by the magnetic shape anisotropy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Effect of Electron Flow on Coercivity and Remanence of FePt Nanocomposites Under Heat Treatment

Phase transition to L1{sub 0} for the FePt crystal requires a temperature approximately 600 °C; however, in this temperature, their size control is exceptionally imperative. Two methods of particle size control with unique advantages have been combined. On the SiO{sub 2} wafers, a thin layer of FePT/carbon nanotubes (CNTs) has been coated and post-annealed at 700 °C under electron flux. Results show the Hc and Mr/Ms of FePt/CNT nanocomposites is raised to 0.75 T and 0.9, respectively, and the average size of the FePt nanoparticles (NPs) is about 5 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Easy Controlled Properties of Quaternary FeNiCrCd Thin Films Deposited from a Single dc Magnetron Sputtering Under the Influence of Deposition Rate

The quaternary FeNiCrCd thin films were produced from a single FeNiCrCr source on a commercial flexible polymer substrate using one dc magnetron sputtering technique. For that, a series of the films with a thickness of 50 nm were produced at different deposition rates of 0.02, 0.04, 0.06, and 0.08 nm/s, separately. In this study, as far as concerned, this was the first time that structural and magnetic properties of FeNiCrCd thin films were investigated. According to compositional analysis, the Fe and Cr contents slightly decreased with increasing deposition rate while Ni was almost constant, whereas those of the amount of Cd atoms increased. However, the atomic amounts of Fe and Cd in the films are quite different from those of the source material. The change of the atomic contents in the films from the source may be attributed to the relatively different bond energy/melting point of metals which have different contents sputtered from source material since this physical parameter is very significant for the sputtering process. For crystal structural analysis, a combination of hexagonal close-packed (hcp) and body-centered cubic (bcc) were observed. The peak intensity of the bcc-dominated planes decreased while the hcp-dominant plane increased since the change in peak intensities is compatible with the compositional analysis with increasing deposition rate. And, the grain sizes decreased gradually from 40.1 to 23.4 nm, with increasing deposition rate from 0.02, to 0.08 nm/s. Also, the film surfaces transformed from a rough to smooth surfaces with decreasing grain sizes as deposition rate increased. For magnetic analysis, the saturation magnetization M{sub s} values decreased as 1030, 773, 730, and 217 emu/cm{sup 3} with increasing deposition rate as 0.02, 0.04, 0.06, and 0.08 nm/s, respectively. In the same manner, the coercivity H{sub c} values were found as 11, 7, 6, and 2 Oe with the deposition rate of 0.02, 0.04, 0.06, and 0.08 nm/s, respectively. The decrease of the H{sub c} may have primarily come from the transformation of rough to smooth surface of the films. It may also be said that the films showed soft magnetic properties due to their low H{sub c} values with increasing deposition rate. Thus, the magnetic properties of the quaternary FeNiCrCd alloy films were seen to be easily improved with the deposition rate parameter for potential use in different industrial applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Salt-Assisted Solution Combustion Synthesis of Ni and Ni/NiO Powders

In this work, Ni and Ni/NiO composite powders were synthesized by one-pot solution combustion method using different fuel to oxidant (φ) ratios (φ = 1, 1.25, 1.5, and 1.75). Phase evolution studied by X-ray diffraction (XRD) method showed that single phase Ni powders were formed at high fuel contents, while the low fuel contents led to the formation of Ni/NiO composite powders. The high combustion temperature resulted in the sintered and large Ni particles (1.1 μm). The particle size decreased up to 50 nm by adding KCl as diluent. However, the amount of NiO phase increased by addition of KCl. The saturation magnetization (Ms) of Ni powders decreased from 51 to 42 emu/g with the increase of φ values from 1.25 to 1.75. The Ms decreased up to 18.5 emu/g, due to the formation of a large amount of NiO phase by addition of KCl. The coercivity of the synthesized powders was in the range of 78 to 111 Oe, as a function of particle size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of Electrical and Magnetic Properties of La{sup 3+} Substituted M-Type Ba–Ni Nano-Ferrites

In this paper, La{sup 3+} substituted M-type Ba–Ni hexaferrite nanoparticles having composition Ba{sub 0.8}Ni{sub 0.2}Fe{sub 12-x}La{sub x}O{sub 19} (x = 0, 0.2, 0.4, 0.6, and 0.8) were prepared by co-precipitation route. The phase of the grown NPs was confirmed using X-ray diffraction analysis and results reveal the growth of M-type hexaferrite NPs as a major phase. The energy dispersive X-ray spectroscopy (EDX) was employed to determine the elemental composition of prepared samples. The FTIR spectra of synthesized samples confirm the bond formation of M-type hexaferrites. The optical bandgap was determined by UV-Vis spectroscopy and the results exhibit an increase in optical bandgap with decreasing crystallite size. The vibrating sample magnetometry (VSM) technique was used to analyze the effect of dopant on the magnetic properties like coercivity, saturation magnetization, and remanence of the synthesized samples. The electrical resistivity was measured by two probe method and it was observed that the activation energy shows a decreasing trend with increase in La content. The highly resistive nature of prepared nano ferrites indicates the potential to use these ferrites for high-frequency applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Continuous Dependence on Translations of the Independent Variable for Solutions of Boundary-Value Problems for Differential-Difference Equations

We consider boundary-value problems for differential-difference operators with perturbations in translations of the independent variable. We prove that the family of differential-difference operators is positive definite uniformly with respect to translations of the independent variable. Solutions of such problems depend continuously on these translations. We consider the coercivity problem for differential-difference operators with incommensurable translations of the independent variable and study the approximation of such operators by rational operators.

97 MATHEMATICS AND COMPUTING↗

Improved integrability and boundedness of solutions to some high-order variational problems

We give a series of results on the improved integrability and boundedness of solutions to several high-order variational problems with strengthened coercivity. In particular, we consider the homogeneous Dirichlet problem on the minimum of integral functionals and study variational inequalities with unilateral and bilateral obstacles and with integral and gradient constraints.

97 MATHEMATICS AND COMPUTING↗

Failure Analysis and Magnetic Evaluation of Tertiary Superheater Tube Used in Gas-Fired Boiler

Failure analysis was carried out on a prematurely failed tertiary superheater tube used in gas-fired boiler. The analysis includes a comparative study of visual examination, chemical composition, hardness and microstructure at failed region, adjacent and far to failure as well as on fresh tube. The chemistry was found matching to the standard specification, whereas the hardness was low in failed tube compared to the fish mouth opening region and the fresh tube. Microscopic examination of failed sample revealed the presence of spheroidal carbides of Cr and Mo predominantly along the grain boundaries. The primary cause of failure is found to be localized heating. Magnetic hysteresis loop (MHL) measurements were carried out to correlate the magnetic parameters with microstructure and mechanical properties to establish a possible non-destructive evaluation (NDE) for health monitoring of the tubes. The coercivity of the MHL showed a very good correlation with microstructure and mechanical properties deterioration enabling a possible NDE technique for the health monitoring of the tubes.

36 MATERIALS SCIENCE↗

Performance of Nd-Fe-B Magnets Fabricated by Hot Isostatic Pressing and Low-Temperature Sintering

Magnetic properties and microstructure of Nd-Fe-B sintered magnets fabricated by hot isostatic pressing (HIP) were studied. For comparison, magnets were also fabricated by vacuum sintering. The density reached 7.58 g/cm{sup 3} for the magnets HIP-sintered at 1123 K. The density of the magnets vacuum-sintered at 1123 K was much lower, which is of about 6.92 g/cm{sup 3}. While the density of magnets vacuum-sintered at 1318 K was the same as the HIP-sintered magnets, the sintering temperature was significantly decreased to 1123 K. In addition, the average grain size decreased from 9 to 6 μm, which has enhanced coercivity. Therefore, the coercivity increased from 1067.7 to 1238.5 kA/m, which is 16% higher than the vacuum-sintered magnets. HIP is a promising method to obtain high density and high coercivity Nd-Fe-B sintered magnets.

36 MATERIALS SCIENCE↗

Effect of Annealing Treatment on Mechanical and Magnetic Softening Behaviors of Cold Rolled Interstitial-Free Steel

The recovery and recrystallization behaviors of low-carbon interstitial-free steel are investigated at different annealing temperatures (200-690 °C) through correlation between the changes in magnetic parameters (coercivity and r.m.s. voltage), hardness, tensile strength and high-angle grain boundary fractions (HAB). Magnetic parameters and tensile strength show a significant change within recovery region (200-500 °C), while the hardness variation is very minimal at this temperature region. On the other hand, the hardness is abruptly changed compared to magnetic properties at higher annealing temperature (550-640 °C). The grain boundary characteristics and microtexture evolution occurring at recrystallization regime are evaluated by orientation imaging microscopy (OIM) and orientation distribution function (ODF) through electron backscattered diffraction (EBSD). The increase in recrystallization fraction noticeably affects microtexture property, justifying with the strengthening of γ-fiber, weakening of α-fiber and disappearance of rotated cube component with increasing annealing temperatures.

36 MATERIALS SCIENCE↗

Using an Artificial Neural Network for Nondestructive Evaluation of the Heat Treating Processes for D2 Tool Steels

In nondestructive evaluation (NDE) of heat-treated steels, different variables of the heat treating process have complex effects on outputs of NDE methods, and hence, the effect of one desired variable on NDE outputs should be evaluated to help interpreting the changes. In the present paper, the potential of the magnetic hysteresis method was evaluated for simultaneous detection of the austenitizing and tempering temperatures of AISI D2 samples parts subjected to different heat treatment conditions. To produce the microstructural changes, five groups of the samples were austenitized at 1025-1130 °C, quenched in oil and finally each group was tempered in the range 200-650 °C. SEM and x-ray diffractometry techniques were used to characterize different produced microstructures. For accurate and simultaneous prediction of tempering and austenitizing temperatures, an artificial neural network (ANN) was implemented for magnetic hysteresis outputs including magnetic saturation, coercivity and maximum differential permeability. The study revealed that the magnetic NDE system coupled to ANN has the ability to be adopted as an effective expert NDE tool to predict heat treatment effects on D2 tool steels.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of Nanocrystalline Fe{sub (100−x)}Ni{sub (x)} Alloy Powders by Auto-combustion and Hydrogen Reduction

Nanocrystalline Fe{sub 90}Ni{sub 10,} Fe{sub 70}Ni{sub 30} andFe{sub 50}Ni{sub 50} alloy powders were successfully synthesized using a simple auto-combustion route followed by hydrogen reduction. The experimental work consisted of two steps, where the first step was auto-combustion and, the second step was reduction of the combusted powders. Citric acid was used as fuel during combustion, and citrate to nitrate ratio (C/N) was maintained at 0.3. NiFe{sub 2}O{sub 4} and Fe{sub 2}O{sub 3} phase formation occurred in obtained powders. Obtained powders were reduced in a hydrogen atmosphere at 700 °C/1 h for alloy formation. X-ray diffraction results revealed the presence of BCC α-(Fe,Ni) and FCC γ-(Fe,Ni) phases in reduced powders. Rietveld refinement technique was used to confirm α-(Fe,Ni) and γ-(Fe,Ni) phases with Im-3 m and Fm-3 m space groups, respectively. The Fe{sub 50}Ni{sub 50} powder has been found to have a single γ-(Fe,Ni) phase. Crystallite size of synthesized powders was calculated using the Scherrer equation and transmission electron microscopic analysis, which has been found < 50 nm. The nanocrystalline powders of all three compositions have shown soft magnetic nature with high saturation magnetization (Ms) and low coercivity (Hc). Effect of composition on the phase formation, microstructure and magnetic behavior was investigated. This rapid and simple process for attaining nanoparticles of Fe-Ni alloys with high Ms is expected to be useful in potent applications such as sensors, biomedical applications and electromagnetic wave absorbers.

36 MATERIALS SCIENCE↗