Results for “CO2 Sources” — Page 9

DOE OSTI2023

The Energy Transition: Advanced Nuclear Needed but Address Climate Vulnerabilities Now

The term “Energy Transition” is an attempt to capture an elaborate set of activities related to the modernization and decarbonization of energy grids. Performed concurrently and often in an ad hoc manner across local, state, regional and national boundaries, it is bringing chaos to what should arguably be one of the most conservatively managed of all critical infrastructure sectors. What’s more, with climate change producing an increasing tempo of extreme events, confidence in the intended resilient and redundant structure of the electric grids is likely to ebb. Even without these climate induced stressors, the nation’s electric grid was built for an earlier century. In addition to a drive towards greater efficiency via digitization and a continuing price decline in distributed energy resources (DERs), one could argue that climate change concerns are the primary driver of the energy transition. Non-CO2 emitting generation sources like wind and solar have become an important part of the overall generation fleet, albeit ones that cannot be counted upon to provide dispatchable power. Current projections indicate deployment of even larger percentages of DERs in coming years. Until far better storage capabilities arrive, the variability of wind and solar, inconsistent performance of traditional thermal generation plants, and energy delivery failures associated with natural gas pipelines will reinforce mounting reliability concerns. This pertains to both electric transmission and distribution. The recent shuttering of nuclear power plants in Germany, Japan, the US and elsewhere are also putting more downward pressure on dispatchable generation. Russia’s attack on Ukraine has roiled energy markets worldwide and forced some countries to return to coal as a primary fuel. In view circumstances such as these, it is essential that significant changes be made to policies and planning criteria, and to the standards and code on which they are based. Given the accelerating pace of extreme weather events, this needs to occur as soon as possible.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

CFD Modeling of High-Flux Plate-and-Frame Membrane modules for industrial carbon capture

In this work, we explore the use of CO2-selective flat sheet membranes for capturing CO2 from point sources. We employ Computational Fluid Dynamics (CFD) models to design high-flux plate-and-frame membrane modules to achieve uniform flow distribution among membrane elements, minimize dead-end zones, and ease the common concentration polarization issue for gas separation membranes. The goal is to drive membrane technology improvements by providing better module designs for given membrane properties and operating conditions.

Dosso, Cheick↗

DOE OSTI2024

CCS Opportunity Along the Gulf Coast Corridor

The Gulf Coast corridor, onshore and offshore, from Corpus Christ to the Mississippi River presents a high concentration of CO2 from industrial sources and excellent storage reservoirs in the underlying Cretaceous and Tertiary sands. Analysis of the technical, geologic, economic and social aspects of this CCS opportunity is necessary for successful deployment of CCS technology and eventual attainment of NetZero goals. Presentation at the Offshore Technology Conference (OTC) held in Houston, Texas, May 6-9, 2024.

Grant, Timothy↗

DOE OSTI2024

CFD Modeling of High-Flux Plate-and-Frame Membrane Modules for Industrial Carbon Capture

In this work, we explore the use of CO2-selective flat sheet membranes for capturing CO2 from point sources. We employ Computational Fluid Dynamics (CFD) models to design high-flux plate-and-frame membrane modules to achieve uniform flow distribution among membrane elements, minimize dead-end zones, and ease the common concentration polarization issue for gas separation membranes. The goal is to drive membrane technology improvements by providing better module designs for given membrane properties and operating conditions.

Dosso, Cheick↗

DOE OSTI2024

CCS Opportunity Along the Gulf Coast Corridor

The Gulf Coast corridor, onshore and offshore, from Corpus Christ to the Mississippi River presents a high concentration of CO2 from industrial sources and excellent storage reservoirs in the underlying Cretaceous and Tertiary sands. Analysis of the technical, geologic, economic and social aspects of this CCS opportunity is necessary for successful deployment of CCS technology and eventual attainment of NetZero goals. This is the conference paper accompanying an oral presentation made at the Offshore Technology Conference (OTC) held in Houston, Texas, May 6-9, 2024.

Grant, Timothy↗

NASA NTRS1972

Production of fibers by a floating zone fiber drawing technique

A CO2 laser heated, floating zone fiber growth process was developed. The resulting Al2O3 fibers exhibited the high room temperature strengths for large diameter fibers as well as high specific creep rupture strengths observed at 1093 C and 1316 C (2000 F and 2400 F). Single crystal fibers of TiC and Y2O3 were also grown. An optical system was developed to focus four CO2 laser beams onto the surface of a feed rod permitting the formation of highly controllable molten zones. The optical system permitted energy densities and angle of incidence of the beams to be adjusted over wide ranges. This optical system was incorporated into a controlled atmosphere, fiber growth furnace. The two principal advantages of a CO2 laser heat source are that ambient atmospheres may be freely selected to optimize fiber properties and the laser has no inherent temperature limit, so extremely high melting point materials can be melted. Both advantages were demonstrated.

Haggerty, J. S.↗

NASA NTRS1984

Carbon and energy yields in prebiotic syntheses using atmospheres containing CH4, CO and CO2

Yields based on carbon are usually reported in prebiotic experiments, while energy yields (moles/cal) are more useful in estimating the yields of products that would have been obtained from the primitive atmosphere of the earth. Energy yields for the synthesis of HCN and H2CO from a spark discharge were determined for various mixtures of CH4, CO, CO2, H2, H2O, N2 an NH3. The maximum yields of HCN and H2CO from CH4, CO, and CO2 as carbon sources are about 4 x 10 to the -8th moles/cal.

Miller, S. L.↗

NASA NTRS1984

Current concepts and future directions of CELSS

The components of a bioregenerative life-support system intended for use in space are described and the requirements for system control are discussed. Concepts of such systems include the use of higher plants and/or micro-algae as sources of oxygen, CO2 absorption, potable water, and food. In order to focus on the specific problem of reservoirs and buffers, bioregenerative life support in space is contrasted to terrestrial ecological concepts. Some of the future directions of the NASA CELSS (controlled ecological life-support system) program are outlined.

Macelroy, R. D.↗

NASA NTRS1986

The case for Mars: Concept development for a Mars research station

A program to establish a permanent scientific research base on Mars is described. A Mars base as the much needed long-term focus for the space program is presented. A permanent base was chosen rather than the more conventional concept of a series of individual missions to different sites because the permanent base offers much greater scientific return plus greater crew safety and the potential for eventual growth into a settlement. The Mars base will strive for self-sufficiency and autonomy from Earth. Martian resources will be used to provide life support materials and consumables. The Martian atmosphere will provide a convenient source of volatiles: CO2, N2, and water. Rocket propellant (for returning vehicles), fuels, breathable air, and fertilizers will be manufactured from Mars air. Food will be grown on Mars using Martian materials as plant nutrients. A permanent human presence will be maintained on Mars beginning with the first manned landing via a strategy of crew overlap. This permanent presence will ensure safety and reliability of systems through continuous tending, maintenance, and expansion of the base's equipment and systems. A permanent base will allow the development of a substantial facility on Mars for the same cost (in terms of Earth departure mass) as a series of temporary camps. A base equipped with surface rovers, airplanes, and the ability to manufacture consumables and return propellant will allow far more extensive planetary exploration over a given period of years than would approaches featuring a series of short exploration missions such as the Apollo Moon program.

Welch, S. M.↗

NASA NTRS1986

Radiative forcing of the Venus mesosphere. I - Solar fluxes and heating rates

A radiative-transfer model has been used to derive the structure and amplitude of the solar fluxes and heating rates in the Venus mesosphere, accounting for absorption and scattering extinction sources that encompass CO2, H2O, SO2, and H2SO4 aerosols as well as an unidentified UV absorber. The unknown substance that causes the observed cloud-top UV contrasts is responsible for most of the absorption of sunlight within the upper cloud deck; this contributes to solar heating rates of the order of 6 K/day at levels near 65 km. These results are judged sufficiently reliable for use in numerical dynamical models of the Venus atmosphere.

Crisp, D.↗

NASA NTRS2014

Nanophase Carbonates on Mars: Implications for Carbonate Formation and Habitability

Despite having an atmosphere composed primarily of CO2 and evidence for abundant water in the past, carbonate minerals have only been discovered in small amounts in martian dust [1], in outcrops of very limited extent [2, 3], in soils in the Northern Plains (the landing site of the 2007 Phoenix Mars Scout Mission) [4] and may have recently been detected in aeolian material and drilled and powdered sedimentary rock in Gale Crater (the Mars Science Laboratory [MSL] landing site) [5]. Thermal analysis of martian soils by instruments on Phoenix and MSL has demonstrated a release of CO2 at temperatures as low as 250-300 degC, much lower than the traditional decomposition temperatures of calcium or magnesium carbonates. Thermal decomposition temperature can depend on a number of factors such as instrument pressure and ramp rate, and sample particle size [6]. However, if the CO2 released at low temperatures is from carbonates, small particle size is the only effect that could have such a large impact on decomposition temperature, implying the presence of extremely fine-grained (i.e., "nanophase" or clay-sized) carbonates. We hypothesize that this lower temperature release is the signature of small particle-sized (clay-sized) carbonates formed by the weathering of primary minerals in dust or soils through interactions with atmospheric water and carbon dioxide and that this process may persist under current martian conditions. Preliminary work has shown that clay-sized carbonate grains can decompose at much lower temperatures than previously thought. The first work took carbonate, decomposed it to CaO, then flowed CO2 over these samples held at temperatures >100 degC to reform carbonates. Thermal analysis confirmed that carbonates were indeed formed and transmission electron microsopy was used to determine crystal sized were on the order of 10 nm. The next step used minerals such as diopside and wollastonite that were sealed in a glass tube with a CO2 and H2O source. After reacting these materials for a number of hours, thermal analysis demonstrated the formations of carbonates that decomposed at temperatures as low as 500 degC [7]. Further work is underway to carry out the weathering process under more Mars-like conditions (low pressure and low temperature) to determine if the carbonate decomposition temperature can be shifted to even lower temperatures, consistent with what has been detected by thermal analysis instruments on Mars.

Archer, P. Douglas, Jr.↗

NASA NTRS2018

The Relevance of Mars Samples to Planning for Potential Future In-Situ Resource Utilization

Considerable recent planning has focused on the potential importance of Mars in-situ resources to support future human missions. While atmospheric CO2 provides a source of oxygen, the regolith offers other potential resources. The most significant surface asset is water, which could be used for propellant generation, life support, habitat sustainment, and agriculture. In regard to the latter, the regolith could also provide a source of nutrients to supplement terrestrial fertilizers and/or act as a substrate to buffer plant roots. Local material could also be used as feedstock for construction, including for structures, roads, and additive manufacturing. Native salts (e.g. perchlorates or chlorides) in the Martian regolith could be used as water absorbents for closed loop life support systems or for capture of the limited atmospheric water.

Source record↗

NASA NTRSDate not supplied

Surface Temperature and the Compositional Effects of Electron Bombardment on Dione

Saturn’s icy moons are composed of mostly water ice with minor “contaminants,” such as CO2 ice, and a dark component thought to be organics, hematite and/or metallic Fe [1]. The space weathering process of electron bombardment is expected to be particularly important on the surfaces of Saturn’s inner moons (Mimas, Tethys, Dione, and Rhea), as they orbit within the extended plasma sheet of Saturn’s magnetosphere. Terrains exhibiting thermal anomalies (i.e., colder temperatures in the day and warmer temperatures at night than surrounding areas) correspond to regions of high energy electron bombardment [2; 3]. Energetic electrons impact the surfaces, fracturing ice particles into sub-micron sized grains, and this process becomes more effective for increasing particle energies [4]. In addition to alteration of ices, the dark material may also be modified or generated within icy surfaces by interaction with solar UV radiation, cosmic rays, or by particles trapped in Saturn’s magnetic field [5]. CO2 could be sourced from irradiation of dark organic material [7]. Many of these alterations should be observable in Visible and Infrared Mapping Spectrometer (VIMS) spectra [8]. We used surface temperatures derived from Cassini’s Composite Infrared Spectrometer (CIRS) to help isolate areas where space weathering due to electron bombardment is more predominant and investigated the subtle changes in VIMS spectra using machine learning techniques. We present our results here for Dione. On ocean worlds, space weathering products would be present along with any potential indications of life. We will need to understand the manifestation of space weathering in the data to separate the two processes.

Cindy Lee Young↗

NASA NTRSDate not supplied

Electron Bombardment on Dione: Surface Compositional Effects and Temperature Anomalies

Saturn’s icy moons are composed primarily of water ice with minor other “contaminants,” such as CO2 ice, and a dark component thought to be organics, hematite and/or metallic Fe [1]. The space weathering process of electron bombardment is expected to be particularly important on the surfaces of Saturn’s inner moons (Mimas, Tethys, Dione, and Rhea), as they orbit within Saturn’s inner magnetosphere. Terrains exhibiting thermal anomalies (i.e., colder temperatures in the day and warmer temperatures at night than surrounding areas) correspond to regions of high energy electron bombardment [2; 3; 4; 5]. Energetic electrons impact the surfaces, sintering ice grains together, and this process becomes more effective for increasing particle energies [6]. Solar UV radiation, cosmic rays, dust in-fall, and cold plasma particles trapped in Saturn’s magnetic field also play an important role in altering the nature and the structure of the native surface ices by the implantation of contaminants, ionization, sputtering, and dissociation of water ice molecules [7]. Additionally, CO2 could be sourced from irradiation of dark organic material [8]. Many of these surface alterations are observable in Cassini’s Visible and Infrared Mapping Spectrometer (VIMS) spectra [9]. We used similar methodologies as have been employed in previous works [e.g., 10] to derive surface temperatures from Cassini’s Composite Infrared Spectrometer (CIRS), which helped to isolate areas where space weathering due to electron bombardment is more predominant. The subtle changes in VIMS spectra were investigated using machine learning techniques. We present here our results for Dione.

Cindy Lee Young↗

NASA NTRSDate not supplied

Electron Bombardment on Dione: Surface Compositional Effects and Temperature Anomalies

Saturn’s icy moons are composed primarily of water ice with minor other “contaminants,” such as CO2 ice, and a dark component thought to be organics, hematite and/or metallic Fe. The space weathering process of electron bombardment is expected to be particularly important on the surfaces of Saturn’s inner moons (Mimas, Tethys, Dione, and Rhea), as they orbit within Saturn’s inner magnetosphere. Terrains exhibiting thermal anomalies (i.e., colder temperatures in the day and warmer temperatures at night than surrounding areas) correspond to regions of high energy electron bombardment. Energetic electrons impact the surfaces, sintering ice grains together, and this process becomes more effective for increasing particle energies. Solar UV radiation, cosmic rays, dust in-fall, and cold plasma particles trapped in Saturn’s magnetic field also play an important role in altering the nature and the structure of the native surface ices by the implantation of contaminants, ionization, sputtering, and dissociation of water ice molecules. Additionally, CO2 could be sourced from irradiation of dark organic material. Many of these surface alterations are observable in Cassini’s Visible and Infrared Mapping Spectrometer (VIMS) spectra. We used similar methodologies as have been employed in previous works to derive surface temperatures from Cassini’s Composite Infrared Spectrometer (CIRS), which helped to isolate areas where space weathering due to electron bombardment is more predominant. The subtle changes in VIMS spectra were investigated using machine learning techniques. We present here our results for Dione.

C L Young↗

NASA NTRSDate not supplied

Electron Bombardment on Dione: Surface Compositional Effects and Temperature Abnormalities

Saturn’s icy moons are composed primarily of water ice with minor other “contaminants,” such as CO2 ice, and a dark component thought to be organics, hematite and/or metallic Fe [1]. The space weathering process of electron bombardment is expected to be particularly important on the surfaces of Saturn’s inner moons (Mimas, Tethys, Dione, and Rhea), as they orbit within Saturn’s inner magnetosphere. Terrains exhibiting thermal anomalies (i.e., colder temperatures in the day and warmer temperatures at night than surrounding areas) correspond to regions of high energy electron bombardment [2; 3; 4; 5]. Energetic electrons impact the surfaces, sintering ice grains together, and this process becomes more effective for increasing particle energies [6]. Solar UV radiation, cosmic rays, dust in-fall, and cold plasma particles trapped in Saturn’s magnetic field also play an important role in altering the nature and the structure of the native surface ices by the implantation of contaminants, ionization, sputtering, and dissociation of water ice molecules [7]. Additionally, CO2 could be sourced from irradiation of dark organic material [8]. Many of these surface alterations are observable in Cassini’s Visible and Infrared Mapping Spectrometer (VIMS) spectra [9]. We used similar methodologies as have been employed in previous works [e.g., 10] to derive surface temperatures from Cassini’s Composite Infrared Spectrometer (CIRS), which helped to isolate areas where space weathering due to electron bombardment is more predominant. The subtle changes in VIMS spectra were investigated using machine learning techniques. We present here our results for Dione. [1] Clark, R. N., et al. (2012) Icarus, 218, 831–860 [2] Howett, C. J. A., et al. (2020) Icarus, 113745 [3] Nordheim, T. A., et al. (2017) Icarus, 286, 56-68 [4] Paranicas, C., et al. (2012) Planetary and Space Science, 61, 60–65 [5] Paranicas, C., et al. (2014) Icarus, 234, 155–161 [6] Schaible, M. J., et al. (2016) Icarus, 0, 1–13 [7] Baragiola, R. A., et al., (2013) Astrophysics and Space Science Library, vol. 356. Springer [8] Mennella, V., et al. (2006) The Astrophysical Journal, 643(2), 923 [9] Scipioni, F., et al. (2017) Icarus, 290, 183-200 [10] Howett, C. J. A., et al. (2014) Icarus, 241, 239-247

C L Young↗

DOE OSTI2023

NETL's Carbon Capture Retrofit Databases

This PowerPoint presentation summarizes the recently published Carbon Capture Retrofit Databases and their supporting documents, such as user guides and studies used to inform cost and performance estimates. NETL publications used to develop slide contents include Cost of Capturing CO2 from Industrial Sources, 2022; Industrial CCRD, 2022; Eliminating the Derate of Carbon Capture Retrofits, 2023; PC CCRD, 2023; Cost and Performance of Retrofitting NGCC Units for Carbon Capture, 2023; and NGCC CCRD, 2023.

Hughes, Sydney↗

DOE OSTI2024

CFD modeling of high-flux plate-and-frame membrane modules for industrial carbon capture

In this work, we explore the use of CO2-selective flat sheet membranes for capturing CO2 from point sources. We employ Computational Fluid Dynamics (CFD) models to design high-flux plate-and-frame membrane modules to achieve uniform flow distribution among membrane elements, minimize dead-end zones, and ease the common concentration polarization issue for gas separation membranes. The goal is to drive membrane technology improvements by providing better module designs for given membrane properties and operating conditions.

Dosso, Cheick↗