Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHROMIUM 50”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Synthesis, structures and magnetic properties of pseudo-hollandite chromium sulfides

The pseudo-hollandite chromium sulfides, ACr{sub 5}S{sub 8} (A=K, Rb, Cs) and A'{sub 0.5}Cr{sub 5}S{sub 8} (A'=Sr, Ba), have been synthesized and investigated in structural and magnetic properties. All the compounds crystallize in the isostructure with a monoclinic C2/m. Its crystal structure has triangular lattices and double chains made of Cr{sup 3+} (d{sup 3}; S=3/2) triangles. The magnetic susceptibilities of all compounds behave as Curie-Weiss types in high temperature region. From magnetic susceptibility and specific heat measurements, all the compounds have antiferromagnetic ground states. The Neel temperatures are rather low compared to Weiss temperatures, reflecting magnetic frustration in the triangular lattices and double chains. The magnetic transitions in KCr{sub 5}S{sub 8} and Ba{sub 0.5}Cr{sub 5}S{sub 8} are a two-step transition around 50 and 60 K, respectively, while RbCr{sub 5}S{sub 8} shows a sharp magnetic transition at 42 K, accompanied by magnetoelastic behavior. CsCr{sub 5}S{sub 8} shows a structural transition around 100 K, followed by a magnetic transition at 10 K. In Sr{sub 0.5}Cr{sub 5}S{sub 8}, ferromagnetic interaction develops below 100 K and then a three-dimensional antiferromagnetic order takes place at 30 K. These magnetic properties are discussed from A-cation dependences of local structures and a model of magnetic structure for RbCr{sub 5}S{sub 8} is proposed on the basis of the arguments of magnetic interactions and neutron diffraction data. It is different from the known magnetic structure of TlCr{sub 5}Se{sub 8}. - Graphical abstract: Temperature dependences of magnetic susceptibilities for pseudo-hollandite sulfides, ACr{sub 5}S{sub 8} (A=K, Rb, Cs) and A{sub 0.5}'Cr{sub 5}S{sub 8} (A'=Sr, Ba). The observed magnetic frustration effect originates in the triangular lattice.

36 MATERIALS SCIENCE↗

Ethylene Dimerization and Oligomerization to 1-Butene and Higher Olefins with Chromium-Promoted Cobalt on Carbon Catalyst

Industrial dimerization of ethylene to 1-butene is achieved with catalysts bearing ligand structures and activated by a co-catalyst. Here, we report that a Cr-promoted cobalt oxide on carbon catalyst was able to produce 1-butene with 53.5–82.4% total selectivity at ethylene conversions between 8.9 and 31.5% without the use of a co-catalyst. The Cr-promoted catalyst showed enhanced activity and stability compared to the nonpromoted catalyst. The characterization results revealed that the incorporation of Cr into the cobalt oxide on carbon catalyst was able to decrease the cobalt oxide particle size. Charge transfer from Cr to Co was also observed in the Cr-promoted catalyst compared to monometallic Co and Cr on carbon. The kinetic model built to rationalize the experimental observations predicted a 50% increase in active site dispersion in the Cr-promoted catalyst, which explained the 1.6× apparent reaction rate increase compared to the nonpromoted catalyst.

1-butene↗

High temperature oxidation and microstructural evolution of cold spray chromium coatings on Zircaloy-4 in steam environments

Oxidation kinetics and microstructural evolution of cold sprayed Cr coatings on Zircaloy-4 at 1130–1310 °C in flowing steam at atmospheric pressure have been studied. The study is aimed at understanding of the response of Cr coated Zr-alloy under a steam environment and high temperatures pertinent to design basis accidents (DBAs) and beyond design basis accidents (BDBAs) in light water reactors (LWRs). Surface morphology, microstructure, and phases of post-oxidation test samples were characterized using Scanning Electron Microscopy (SEM), x-ray diffraction (XRD), and Scanning Transmission Electron Microscopy (STEM). Growth kinetics of the Cr-oxide scale and interdiffusion layers between the Cr coating and the Zr-alloy substrate were quantified from cross-sectional SEM images. Cross-sectional analysis showed that the Cr coatings offered a 50 times reduction in oxidation rate over bare Zircaloy-4 in a 1310 °C steam environment. Oxidation kinetics at 1130 °C followed parabolic law (i.e., n ~ 0.5 in power law kinetics) but at 1230 °C and 1310 °C the value of n was suppressed to below 0.5 possibly due to the volatilization of Cr species at the two highest temperatures. Interdiffusion at coating/substrate interface resulted in formation of a brittle Cr 2 Zr or Zr(Fe, Cr) 2 intermetallic compound layer on the order of micrometer in thickness and scattered Cr-rich precipitates were observed well below the interface within the Zr-alloy substrate after cooling. These experimental results could provide data to LWR system simulation codes for better estimation of coping time in the event of accidents.

36 MATERIALS SCIENCE↗

Chromium-free nickel alloys for hot sulfuric and sulfur environments

There are few adequate materials available for severe corrosion conditions, like those of the S–I thermochemical cycle. High Si, Ni-alloys have excellent corrosion resistance, especially in mineral acids, but have typically been limited by poor mechanical properties or difficult fabrication issues. The ductility of nickel silicide, Ni3Si, can be improved through a combination of micro- and macro-alloying. Nb and other minor alloying elements yield a cast alloy with excellent corrosion resistance to sulfuric acid and good mechanical properties. In this paper, efforts to optimize the alloys performance are presented along with progress toward the development of a wrought version of the material. It was found that an appropriate heat treatment provides the largest improvement in the cast Ni–Si alloy microstructure. Trials have resulted in more than a 50% reduction by the cold rolling process. This process not only increases homogenization but also results in a more uniform distribution of G-phase particles, which is beneficial for the improvements in ductility and corrosion resistance. These alloys have great potential for use in future hydrogen production as well as fossil energy combustion.

99 GENERAL AND MISCELLANEOUS↗

PdCr Based High Temperature Static Strain Gage

The program at NASA Lewis Research Center to develop a high temperature static strain gage system for the hypersonic vehicle and turbine engine research has emphasized a palladium- 13wt%chromium (PdCr) alloy. Gages made from this alloy are being developed in both fine wire and thin film form. The wire gage system had platinum wire as a temperature compensator and was coated with a special alumina and zirconia mixture overcoat. This PdCr compensated wire gage responded linearly to the imposed strain to at least i000 microstrain. The strain sensitivity of the gage did not vary much with temperature. The apparent strain of this compensated gage was significantly lower than that of the other gages. It varied within 300 microstrain from room temperature to 800 deg. C with a reproducibility within 50 microstrain between thermal cycles to 800 deg. C. This is a significant advance over the 400 deg. C barrier of previous techniques for resistance static strain gages. The sputtered thin film PdCr strain gage, whose size was 8x8 mm and 10 micron thick, has demonstrated the possibility of extending the use of the PdCr strain gage to a temperature of approximately 1000 deg. C.

Lei, Jih-Fen↗

Duodenal crypt health following exposure to Cr(VI): Micronucleus scoring, γ-H2AX immunostaining, and synchrotron X-ray fluorescence microscopy

Lifetime exposure to high concentrations of hexavalent chromium [Cr(VI)] in drinking water results in intestinal damage and an increase in duodenal tumors in B6C3F1 mice. To assess whether these tumors could be the result of a direct mutagenic or genotoxic mode of action, we conducted a GLP-compliant 7-day drinking water study to assess crypt health along the entire length of the duodenum. Mice were exposed to water (vehicle control), 1.4, 21, or 180 ppm Cr(VI) via drinking water for 7 consecutive days. Crypt enterocytes in Swiss roll sections were scored as normal, mitotic, apoptotic, karyorrhectic, or as having micronuclei. A single oral gavage of 50 mg/kg cyclophosphamide served as a positive control for micronucleus induction. Exposure to 21 and 180 ppm Cr(VI) significantly increased the number of crypt enterocytes. Micronuclei and γ-H2AX immunostaining were not elevated in the crypts of Cr(VI)-treated mice. In contrast, treatment with cyclophosphamide significantly increased numbers of crypt micronuclei and qualitatively increased γ-H2AX immunostaining. Synchrotron-based X-ray fluorescence (XRF) microscopy revealed the presence of strong Cr fluorescence in duodenal villi, but negligible Cr fluorescence in the crypt compartment. Together, these data indicate that Cr(VI) does not adversely effect the crypt compartment where intestinal stem cells reside, and provide additional evidence that the mode of action for Cr(VI)-induced intestinal cancer in B6C3F1 mice involves chronic villous wounding resulting in compensatory crypt enterocyte hyperplasia.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Detailed Design and Cost Estimation of a 300 MWe Oxy-Fuel sCO2 Turbine

The detailed design of a 300 MWe, utility scale oxy-fuel turbine has been completed for purposed operation in the sCO2 direct fired Allam-Fetvedt cycle, targeting near-zero emissions and a 50% LHV system efficiency. The turbine and its supporting plant aim to offer a lower levelized cost of energy than a natural gas combined cycle plant employing carbon capture. The oxy-fuel turbine conditions include an inlet temperature of 1150°C and inlet pressure of 305 bar, representing temperatures near that of a gas turbine simultaneously with pressures near an ultra-supercritical steam turbine. The combustor housing and turbine designs were completed according to the ASME BPVC; the turbine case specifically incorporates a multi-body design with inner high-pressure barrel case and low-pressure (30 bar) horizontally split outer case of low-chromium steel material. Lateral rotordynamic evaluation demonstrated acceptable vibration response for a range of imbalance conditions per API standards. The cooling flow required in the six-stage turbine flowpath for 30,000 hr. blade and stator lifetime is predicted through thermal and structural modeling of the first stage. The provided cost estimate of the turbine is formed through a combination of scaled up-costs from procured 10 MWe scale sCO2 turbomachinery hardware, and vendor provided budgetary quotes of larger components including the turbine case requiring casting, welding, and final machining processes. The performance and cost estimation of the oxy-fuel turbine predicted for the completed detailed design provides important information towards future development needs for market penetration of utility scale direct fired sCO2 power cycles.

Marshall, Michael [Southwest Research Institute, S↗

Effect of Mo-rich Fillers in Pulsed Current Gas Tungsten Arc Welding of Inconel 718 for Improved Strength and Hot Corrosion Resistance

The formation of Laves phase in the fusion zone of Inconel 718 welds is considered to be detrimental and requires major attention, as this phase deteriorates the mechanical properties and high-temperature corrosion resistance. This present study addresses the use of current pulsing technique on the gas tungsten arc welding of 5-mm-thick Inconel 718 plates. Nb-free fillers, namely ERNiCrMo-10 and ERNiCrMo-14, are chosen for joining these plates. Microstructure studies revealed the segregation of Mo-rich phases at the inter-dendritic regions of the fusion zone of both the weldments. Further, the occurrence of detrimental Laves phase was minimized while employing Mo-rich fillers. It is inferred from the tensile studies that the fractures occurred in the parent metal for ERNiCrMo-10 filler and at the fusion zone while employing ERNiCrMo-14. Room-temperature Charpy impact studies also affirm that the impact toughness of ERNiCrMo-10 welds is significantly greater than that of ERNiCrMo-14. Hot corrosion studies were performed on the coupons by exposing them to a synthetic molten salt environment comprising Na{sub 2}SO{sub 4} + 60%V{sub 2}O{sub 5} at 800 °C for 50 h. Owing to the presence of higher amounts of Cr{sub 2}O{sub 3} and NiO, both fusion zones exhibited better hot corrosion resistance than the parent metal. The novel outcome of the study reiterates that with the use of current pulsing and Mo-rich fillers, the detrimental phase shall be controlled.

36 MATERIALS SCIENCE↗

High-peak power, passively Q-switched, composite, all-polycrystalline ceramic Nd:YAG/Cr{sup 4+}:YAG lasers

High-peak power, passively Q-switched, composite Nd : YAG/Cr{sup 4+} : YAG lasers consisting of all-polycrystalline bonded Nd:YAG and Cr{sup 4+}:YAG ceramics are developed, and two applications of such lasers are discussed. A 1.1-at. %-doped Nd:YAG/Cr{sup 4+}:YAG ceramic laser is fabricated, which is quasi-cw pumped by a diode laser in the Hz-range, delivering laser pulses of 2.5-mJ energy and 1.9-MW peak power. By frequency doubling the laser output in a LiB{sub 3}O{sub 5} (LBO) nonlinear crystal at room temperature, 0.36-mJ, 0.3-MW green laser pulses with 27 % conversion efficiency are produced at 532 nm. Furthermore, a highly doped (1.5-at. %) Nd:YAG/Cr{sup 4+}:YAG ceramic laser operates successfully in the range of pulse repetition rates from 50 to 500 Hz, yielding 0.8-to-1.0 mJ pulses with a peak power around 1 MW. The laser output beam is amplified in a master-oscillator - power-amplifier (MOPA) system to generate laser pulses with 11-mJ energy at a 250-Hz repetition rate. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dispersive optical potential from an analysis of neutron single-particle energies in the Ti, Cr, and Fe isotopes featuring 20 to 50 neutrons

Neutron single-particle energies in unstable Ti, Cr, and Fe isotopes containing 20 to 26 neutrons were evaluated on the basis of experimental proton energies in the mirror-symmetric nuclei. The neutron single-particle energies in the 20 Less-Than-Or-Slanted-Equal-To N Less-Than-Or-Slanted-Equal-To 50 Ti, Cr, and Fe isotopes were calculated on the basis of the mean-field model with a dispersive optical potential, and the results were compared with available experimental data and with the results of estimations and calculations based on the relativistic mean-field model and on the multiparticle shell model with the GXPF1 interaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quenching of the Exchange Bias Training in Fe/Cr{sub 2}O{sub 3}/Fe Trilayer

Exchange bias (EB) and its associated training effects are studied in an epitaxial Fe(10 nm)/Cr{sub 2}O{sub 3}(2.7 nm)/Fe(10 nm) trilayer heterostructure grown by molecular beam epitaxy. The EB decreases linearly with increasing temperature from T = 5 K to T = 50 K. It changes sign and becomes positive within 50 K < T < 200 K, finally changing back to regular EB for T<200K up to the highest measured temperature of T = 395 K. Remarkably, the latter is far above the bulk Neel temperature TN = 307 K. EB training effects occur only at 5 K < T < 50 K. We show that this training can be quenched by subjecting the system to DC magnetic field, {mu}{sub 0}H{sub DC} {<=} 7 T. The applied field most likely induces a temperature dependent spin-flop transition. Upon its removal the antiferromagnetic Cr{sub 2}O{sub 3} pinning layer evolves uniformly into its quasi-equilibrium spin configuration thus leading to quasi-equilibrium EB.

36 MATERIALS SCIENCE↗

Adsorption of Chlorine on Zr(0001) Surface: First-Principles Predictions

The adsorption of atomic and gaseous chlorine on Zr (0001) surface has been investigated using state-of-the-art density functional theory calculations as part of an effort to gain fundamental understanding of chlorination processes occurring in fuel cladding materials. Zirconium alloys, including Zircaloy-4, Zircaloy-2 and Zr-Nb alloys (Zirlo{sup TM} and Zr-2.5Nb) are the most common fuel cladding materials in nuclear light water reactors (LWRs) due to their favorable mechanical properties, corrosion resistance, low thermal-neutron capture cross section and criticality. The United States produces a large amount of cladding material from used nuclear fuel, which could approach 1,000 MT/year in the next 50 years. In nuclear fuel recycling, spent nuclear fuel assemblies are disassembled and the cladding hulls are separated from the U oxide spent fuel. Zr can be recovered from Zr cladding using the chlorination method. However the presence of impurities in the recovered ZrCl{sub 4} was reported, including Sn, Cr and Fe. Thus, further efforts are necessary to improve the purification process significantly. This requires fundamental understanding of chlorination processes in cladding materials. Most of the material properties are expected to be similar between the pure zirconium and its alloys due to the fact that the alloy composition consists of more than 95 weight-percent zirconium and less than 2% of tin, niobium, iron, chromium, nickel and other metals. Therefore, while the overarching goal is to understand the chlorination process occurring in complex fuel cladding materials, chlorination of pure zirconium was used as an initial system for the modeling and simulation efforts in this study.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A comparison of wrought and powder metallurgical FeCrAl claddings under simulated LWR accident transients

Iron-chromium-aluminum (FeCrAl) alloys are potential accident tolerant fuel (ATF) cladding candidates for light-water reactors but are difficult to fabricate as thin-walled tubes via conventional cast-and-wrought routes. Powder metallurgy (PM) offers a manufacturing alternative with improved compositional control, but its transient accident performance has not been directly benchmarked against wrought variants. This study evaluates the burst behavior of commercially developed PM-processed FeCrAl alloys, PM-C26M (Fe-12Cr-6Al-2Mo) and the high precipitate density FA-SMT (Fe-22Cr-5Al-3Mo), under simulated light-water reactor accident transient conditions. Burst testing was conducted using the Severe Accident Test Station with heating rates of 5 °C/s and 50 °C/s and internal pressures ranging from 25 MPa to 100 MPa. PM-C26M reproduced wrought C26M burst behavior within 7–37 °C across the stress range, indicating that PM processing does not compromise transient strength. FA-SMT exhibited markedly higher burst temperatures and reduced heating-rate sensitivity, consistent with its engineered precipitate strengthening. FA-SMT rupture exhibited axial "unzipping" rather than the lateral tearing characteristic of PM- and wrought C26M. Post-test EBSD and fractography indicate that this behavior is strongly correlated with strain-gated intergranular void nucleation associated with the dense precipitate architecture of FA-SMT, a response absent in the comparatively clean PM-C26M matrix and consistent with rupture morphologies reported for oxide-dispersion strengthened (ODS) FeCrAl of similar base-matrix chemistry to PM-C26M. These findings highlight the potential of powder metallurgy as a viable fabrication route for ATF claddings from an accident performance standpoint.

Bell, Sam [ORNL] (ORCID:0000000251905657)↗

Compositional dependence of antiferromagnetic anisotropy in IrMn/CoFe exchange bias systems

We report on a study of the effect of Ir content on the loop shift (H{sub EX}) and anisotropy constant (K{sub AF}) in the CoFe/IrMn system. The sample structure investigated was Si/NiCr(5 nm)/Ru(5 nm)/Ir{sub x}Mn{sub 1-x}/CoFe(2 nm)/Ta(3 nm). All samples were produced by sputtering and the Ir and Mn levels were varied using a specially made composite target and deposited at {approx}120 deg. C. The composition of the samples was analyzed using energy dispersive x-ray analysis. K{sub AF} was calculated from thermal activation measurements using the York Protocols. A plateau in H{sub EX} was found for Ir levels between 16- 20.5 at. %. H{sub EX} was found to decrease by 50% on either side of this window. This result is consistent with previous studies where the enhancement of H{sub EX} was attributed to an increase in the atomic ordering of the IrMn alloy. However, K{sub AF} decreases linearly with increasing Ir concentration and does not appear to correlate with the change in H{sub EX}.

36 MATERIALS SCIENCE↗

Deformation and annealing study of Nicraly

Extensive experiments were carried out on the ODS alloy Nicraly, (an alloy prepared by mechanical alloying and consolidating a powder blend consisting of 16% chromium, 4% aluminum, 2-3% yttria, balance nickel), in efforts to develop methods of controlling the grain size and grain shape of the material. The experiments fell into two general categories: variations in the annealing parameters using the as-extruded material as it was received, and various thermomechanical processing schedules (various combinations of cold work and annealing). Success was achieved in gaining grain size and grain shape control by annealing of the as-extruded material. By proper selection of annealing temperature and cooling rates, the grain size of the as-received material was increased almost two orders of magnitude (from an average grain dimension of 0.023 mm to 1.668 mm) while the aspect ratio was increased by some 50% (from 20:1 to 30:1). No success was achieved in gaining significant control of the grain size and shape of the material by thermo-mechanical processing.

Trela, D. M.↗

Investigations of the electronic and magnetic structures of Co{sub 2}YGa (Y=Cr, Mn) Heusler alloys and their (100) surfaces

Density functional theory calculations are performed to investigate the structural, electronic, and magnetic properties of bulk structures of Co{sub 2}YGa (Y = Cr, Mn) Heusler alloys and the surfaces along the (100) orientation. The bulk structures of both alloys show a ferromagnetic behavior with total magnetic moments of 3.03μ{sub B} and 4.09μ{sub B} and high spin polarizations of 99% and 67% for Co{sub 2}CrGa and Co{sub 2}MnGa, respectively. The surfaces are found to exhibit corrugations due to different relaxations of the surface atoms. For the case of Co{sub 2}CrGa, two surfaces preserve the half metallicity, namely those with Cr-Ga and Ga– terminations with high spin polarizations above 90%, whereas it dropped to about 50% for the other surfaces. However, the spin polarizations of Co-Co and Mn-Ga terminated surfaces remain close to that of bulk Co{sub 2}MnGa alloy, whereas it is suppressed down to 17% for Co– termination. The highest local magnetic moments are found to be 3.26 μ{sub B} and 4.11 μ{sub B} for Cr and Mn surface atoms in Cr-Ga and Mn– terminated surfaces, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical Absorption and Spectral Photoconductivity in α-(Fe 1-x Cr x ) 2 O 3 Solid-Solution Thin Films

Hematite, α-Fe 2 O 3 , is an attractive narrow gap oxide for consideration as an efficient visible light photocatalyst, with significant potential for band gap engineering via doping. We examine optical absorption in α (Fe 1-x Crx) 2 O 3 epitaxial films and explain the observed excitations, and the nature of the band gap dependence on x, through first principles calculations. The calculated and measured optical band gap becomes smaller than that of the bulk α-Fe 2 O 3 and reaches a minimum as the Cr mole fraction increases to 50%. The lowest energy transitions in the mixed-metal alloys involve electron excitation from occupied Cr 3d orbitals to unoccupied Fe 3d orbitals, and they result in a measureable photocurrent. The onset of α-Fe 2 O 3 photoconductivity can be reduced by nearly ~0.5 eV through addition of Cr.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗